blob: 47c7ded81c1b56dc121eaf0557dac55a1d6db3a5 [file] [log] [blame]
/*
*
* Copyright (c) 2020 Project CHIP Authors
* Copyright (c) 2020 Texas Instruments Incorporated
* All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* These arguments were used when this file was generated. They will be automatically applied on subsequent loads
* via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments.
* @cliArgs --board "/ti/boards/CC26X2R1_LAUNCHXL" --product "simplelink_cc13x2_26x2_sdk@4.40.05.02_eng"
* @versions {"tool":"1.9.0+2015","templates":null}
*/
/**
* Import the modules used in this configuration.
*/
const ble = scripting.addModule("/ti/ble5stack/ble");
const CCFG = scripting.addModule("/ti/devices/CCFG");
const rfdesign = scripting.addModule("/ti/devices/radioconfig/rfdesign");
const dmm = scripting.addModule("/ti/dmm/dmm");
const AESCCM = scripting.addModule("/ti/drivers/AESCCM");
const AESCCM1 = AESCCM.addInstance();
const AESCCM2 = AESCCM.addInstance();
const AESCTRDRBG = scripting.addModule("/ti/drivers/AESCTRDRBG");
const AESCTRDRBG1 = AESCTRDRBG.addInstance();
const AESECB = scripting.addModule("/ti/drivers/AESECB");
const AESECB1 = AESECB.addInstance();
const AESECB2 = AESECB.addInstance();
const ECDH = scripting.addModule("/ti/drivers/ECDH");
const ECDH1 = ECDH.addInstance();
const ECDH2 = ECDH.addInstance();
const NVS = scripting.addModule("/ti/drivers/NVS");
const NVS1 = NVS.addInstance();
const NVS2 = NVS.addInstance();
const RF = scripting.addModule("/ti/drivers/RF");
const RTOS = scripting.addModule("/ti/drivers/RTOS");
const SHA2 = scripting.addModule("/ti/drivers/SHA2");
const SHA21 = SHA2.addInstance();
const TRNG = scripting.addModule("/ti/drivers/TRNG");
const TRNG1 = TRNG.addInstance();
const TRNG2 = TRNG.addInstance();
const TRNG3 = TRNG.addInstance();
const UART = scripting.addModule("/ti/drivers/UART");
const UART1 = UART.addInstance();
const UART2 = UART.addInstance();
const Button = scripting.addModule("/ti/drivers/apps/Button");
const Button1 = Button.addInstance();
const Button2 = Button.addInstance();
const LED = scripting.addModule("/ti/drivers/apps/LED");
const LED1 = LED.addInstance();
const LED2 = LED.addInstance();
const thread = scripting.addModule("/ti/thread/thread");
/**
* Write custom configuration values to the imported modules.
*/
ble.maxConnNum = 1;
ble.numOfAdvSets = 1;
ble.lockProject = true;
ble.maxPDUSize = 255;
ble.radioConfig.codeExportConfig.$name = "ti_devices_radioconfig_code_export_param1";
ble.connUpdateParamsPeripheral.$name = "ti_ble5stack_general_ble_conn_update_params0";
ble.connUpdateParamsPeripheral.reqMinConnInt = 30;
ble.connUpdateParamsPeripheral.reqMaxConnInt = 50;
ble.advSet1.$name = "ti_ble5stack_broadcaster_advertisement_set0";
ble.advSet1.advParam1.$name = "ti_ble5stack_broadcaster_advertisement_params0";
ble.advSet1.advData1.$name = "ti_ble5stack_broadcaster_advertisement_data0";
ble.advSet1.scanRes1.$name = "ti_ble5stack_broadcaster_advertisement_data1";
CCFG.enableBootloader = true;
CCFG.enableBootloaderBackdoor = true;
CCFG.dioBootloaderBackdoor = 13;
CCFG.levelBootloaderBackdoor = "Active low";
CCFG.srcClkLF = "Derived from HF XOSC";
CCFG.ccfgTemplate.$name = "ti_devices_CCFGTemplate0";
dmm.project = "ti_thread_thermostat_remote_display";
dmm.stackRoles = ["blePeripheral","threadFTD"];
dmm.lockStackRoles = true;
dmm.numApplicationStates = 10;
dmm.applicationState0 = "ANY";
dmm.applicationState1 = "DMMPOLICY_BLE_IDLE";
dmm.applicationState2 = "DMMPOLICY_BLE_ADV";
dmm.applicationState3 = "DMMPOLICY_BLE_CONNECTING";
dmm.applicationState4 = "DMMPOLICY_BLE_HIGH_BANDWIDTH";
dmm.applicationState5 = "DMMPOLICY_BLE_CONNECTED";
dmm.applicationState6 = "DMMPOLICY_BLE_OAD";
dmm.applicationState7 = "DMMPOLICY_THREAD_IDLE";
dmm.applicationState8 = "DMMPOLICY_THREAD_LINK_EST";
dmm.applicationState9 = "DMMPOLICY_THREAD_DATA";
dmm.policyArray.create(4);
dmm.policyArray[0].$name = "ti_dmm_policy_dmm_policy0";
dmm.policyArray[0].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble0";
dmm.policyArray[0].blePeripheral.applicationStates = ["applicationState6"];
dmm.policyArray[0].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread0";
dmm.policyArray[0].threadFTD.pause = "DMMPOLICY_PAUSED";
dmm.policyArray[1].$name = "ti_dmm_policy_dmm_policy1";
dmm.policyArray[1].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble1";
dmm.policyArray[1].blePeripheral.applicationStates = ["applicationState3","applicationState4"];
dmm.policyArray[1].blePeripheral.weight = 25;
dmm.policyArray[1].blePeripheral.appliedActivity = ["DMMPOLICY_APPLIED_ACTIVITY_BLE_CONNECTION"];
dmm.policyArray[1].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread1";
dmm.policyArray[2].$name = "ti_dmm_policy_dmm_policy2";
dmm.policyArray[2].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble2";
dmm.policyArray[2].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread2";
dmm.policyArray[2].threadFTD.weight = 30;
dmm.policyArray[2].threadFTD.applicationStates = ["applicationState8"];
dmm.policyArray[2].threadFTD.appliedActivity = ["DMMPOLICY_APPLIED_ACTIVITY_ALL"];
dmm.policyArray[3].$name = "ti_dmm_policy_dmm_policy3";
dmm.policyArray[3].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble3";
dmm.policyArray[3].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread3";
dmm.policyArray[3].threadFTD.weight = 1;
AESCCM1.$name = "CONFIG_AESCCM0";
AESCCM2.$name = "CONFIG_AESCCM_1";
AESCTRDRBG1.$name = "CONFIG_AESCTRDRBG_0";
AESCTRDRBG1.aesctrObject.$name = "CONFIG_AESCTR_0";
AESECB1.$name = "CONFIG_AESECB0";
AESECB2.$name = "CONFIG_AESECB_1";
ECDH1.$name = "CONFIG_ECDH0";
ECDH2.$name = "CONFIG_ECDH_1";
NVS1.$name = "CONFIG_NVSINTERNAL";
NVS1.internalFlash.$name = "ti_drivers_nvs_NVSCC26XX0";
NVS1.internalFlash.regionBase = 0xAA000;
NVS1.internalFlash.regionSize = 0x4000;
NVS2.$name = "CONFIG_NVSEXTERNAL";
NVS2.nvsType = "External"; // NVS Region Type
NVS2.$hardware = system.deviceData.board.components.MX25R8035F;
RTOS.name = "FreeRTOS";
SHA21.$name = "CONFIG_SHA2_0";
TRNG1.$name = "CONFIG_TRNG_0";
TRNG2.$name = "CONFIG_TRNG_1";
TRNG3.$name = "CONFIG_TRNG_APP";
UART1.$name = "CONFIG_UART_DEBUG";
UART1.uart.$assign = "UART1";
UART1.uart.txPin.$assign = "boosterpack.4";
UART1.uart.rxPin.$assign = "boosterpack.3";
UART1.txPinInstance.$name = "CONFIG_PIN_4";
UART1.rxPinInstance.$name = "CONFIG_PIN_5";
UART2.$name = "CONFIG_DISPLAY_UART";
UART2.txPinInstance.$name = "CONFIG_PIN_6";
UART2.rxPinInstance.$name = "CONFIG_PIN_7";
/* Left Button */
Button1.$name = "CONFIG_BTN_LEFT";
Button1.$hardware = system.deviceData.board.components["BTN-1"];
Button1.gpioPin.$name = "CONFIG_GPIO_BTN1";
Button1.gpioPin.pull = "Pull Up";
Button1.gpioPin.interruptTrigger = "Falling Edge";
/* Left Button */
Button2.$name = "CONFIG_BTN_RIGHT";
Button2.$hardware = system.deviceData.board.components["BTN-2"];
Button2.gpioPin.$name = "CONFIG_GPIO_BTN2";
Button2.gpioPin.pull = "Pull Up";
Button2.gpioPin.interruptTrigger = "Falling Edge";
/* Red LED */
LED1.$name = "CONFIG_LED_RED";
LED1.$hardware = system.deviceData.board.components.LED_RED;
LED1.gpioPin.$name = "CONFIG_GPIO_RLED";
LED1.gpioPin.mode = "Output";
LED1.gpioPin.callbackFunction = "";
/* Green LED */
LED2.$name = "CONFIG_LED_GREEN";
LED2.$hardware = system.deviceData.board.components.LED_GREEN;
LED2.gpioPin.$name = "CONFIG_GPIO_GLED";
LED2.gpioPin.mode = "Output";
LED2.gpioPin.callbackFunction = "";
thread.deviceTypeReadOnly = true;
thread.pm.$name = "ti_thread_pm_thread_pm0";
thread.rf.$name = "ti_thread_rf_thread_rf0";
thread.rf.radioConfig.$name = "ti_devices_radioconfig_settings_ieee_15_40";
thread.rf.radioConfig.codeExportConfig.$name = "ti_devices_radioconfig_code_export_param0";
thread.network.$name = "ti_thread_network_thread_network0";
thread.security.$name = "ti_thread_security_thread_security0";
/**
* Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future
* version of the tool will not impact the pinmux you originally saw. These lines can be completely deleted in order to
* re-solve from scratch.
*/
UART2.uart.$suggestSolution = "UART0";
UART2.uart.txPin.$suggestSolution = "boosterpack.30";
UART2.uart.rxPin.$suggestSolution = "boosterpack.29";