| /* |
| * |
| * Copyright (c) 2020-2022 Project CHIP Authors |
| * Copyright (c) 2019 Google LLC. |
| * Copyright (c) 2013-2018 Nest Labs, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * This file defines default compile-time configuration constants |
| * for CHIP. |
| * |
| * Package integrators that wish to override these values should |
| * either use preprocessor definitions or create a project- |
| * specific chipProjectConfig.h header and then assert |
| * HAVE_CHIPPROJECTCONFIG_H via the package configuration tool |
| * via --with-chip-project-includes=DIR where DIR is the |
| * directory that contains the header. |
| * |
| * NOTE WELL: On some platforms, this header is included by C-language programs. |
| * |
| */ |
| |
| #pragma once |
| |
| #if CHIP_HAVE_CONFIG_H |
| #include <core/CHIPBuildConfig.h> |
| #endif |
| |
| #include <ble/BleConfig.h> |
| #include <system/SystemConfig.h> |
| |
| /* COMING SOON: making the INET Layer optional entails making this inclusion optional. */ |
| // #include "InetConfig.h" |
| /* |
| #if INET_CONFIG_ENABLE_TCP_ENDPOINT && INET_TCP_IDLE_CHECK_INTERVAL <= 0 |
| #error "chip SDK requires INET_TCP_IDLE_CHECK_INTERVAL > 0" |
| #endif // INET_CONFIG_ENABLE_TCP_ENDPOINT && INET_TCP_IDLE_CHECK_INTERVAL <= 0 |
| */ |
| /* Include a project-specific configuration file, if defined. |
| * |
| * An application or module that incorporates chip can define a project configuration |
| * file to override standard chip configuration with application-specific values. |
| * The chipProjectConfig.h file is typically located outside the CHIP source tree, |
| * alongside the source code for the application. |
| */ |
| #ifdef CHIP_PROJECT_CONFIG_INCLUDE |
| #include CHIP_PROJECT_CONFIG_INCLUDE |
| #endif |
| |
| /* Include a platform-specific configuration file, if defined. |
| * |
| * A platform configuration file contains overrides to standard chip configuration |
| * that are specific to the platform or OS on which chip is running. It is typically |
| * provided as apart of an adaptation layer that adapts CHIP to the target |
| * environment. This adaptation layer may be included in the CHIP source tree |
| * itself or implemented externally. |
| */ |
| #ifdef CHIP_PLATFORM_CONFIG_INCLUDE |
| #include CHIP_PLATFORM_CONFIG_INCLUDE |
| #endif |
| |
| /** |
| * @name chip Security Manager Memory Management Configuration |
| * |
| * @brief |
| * The following definitions enable one of three potential chip |
| * Security Manager memory-management options: |
| * |
| * * #CHIP_CONFIG_MEMORY_MGMT_PLATFORM |
| * * #CHIP_CONFIG_MEMORY_MGMT_SIMPLE |
| * * #CHIP_CONFIG_MEMORY_MGMT_MALLOC |
| * |
| * Note that these options are mutually exclusive and only one |
| * of these options should be set. |
| * |
| * @{ |
| */ |
| |
| /** |
| * @def CHIP_CONFIG_MEMORY_MGMT_PLATFORM |
| * |
| * @brief |
| * Enable (1) or disable (0) support for platform-specific |
| * implementation of Matter memory-management functions. |
| * |
| * @note This configuration is mutual exclusive with |
| * #CHIP_CONFIG_MEMORY_MGMT_MALLOC. |
| * |
| */ |
| #ifndef CHIP_CONFIG_MEMORY_MGMT_PLATFORM |
| #define CHIP_CONFIG_MEMORY_MGMT_PLATFORM 0 |
| #endif // CHIP_CONFIG_MEMORY_MGMT_PLATFORM |
| |
| /** |
| * @def CHIP_CONFIG_MEMORY_MGMT_MALLOC |
| * |
| * @brief |
| * Enable (1) or disable (0) support for a chip-provided |
| * implementation of Matter memory-management |
| * functions based on the C Standard Library malloc / free |
| * functions. |
| * |
| * @note This configuration is mutual exclusive with |
| * #CHIP_CONFIG_MEMORY_MGMT_PLATFORM. |
| * |
| */ |
| #ifndef CHIP_CONFIG_MEMORY_MGMT_MALLOC |
| #define CHIP_CONFIG_MEMORY_MGMT_MALLOC 1 |
| #endif // CHIP_CONFIG_MEMORY_MGMT_MALLOC |
| |
| /** |
| * @} |
| */ |
| |
| #if ((CHIP_CONFIG_MEMORY_MGMT_PLATFORM + CHIP_CONFIG_MEMORY_MGMT_MALLOC) != 1) |
| #error "Please assert exactly one of CHIP_CONFIG_MEMORY_MGMT_PLATFORM or CHIP_CONFIG_MEMORY_MGMT_MALLOC." |
| #endif // ((CHIP_CONFIG_MEMORY_MGMT_PLATFORM + CHIP_CONFIG_MEMORY_MGMT_MALLOC) != 1) |
| |
| #if !CHIP_CONFIG_MEMORY_MGMT_MALLOC && CHIP_SYSTEM_CONFIG_USE_BSD_IFADDRS |
| #error "!CHIP_CONFIG_MEMORY_MGMT_MALLOC but getifaddrs() uses malloc()" |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_MEMORY_DEBUG_CHECKS |
| * |
| * @brief |
| * Enable (1) or disable (0) building with additional code |
| * for memory-related checks. |
| */ |
| #ifndef CHIP_CONFIG_MEMORY_DEBUG_CHECKS |
| #define CHIP_CONFIG_MEMORY_DEBUG_CHECKS 0 |
| #endif // CHIP_CONFIG_MEMORY_DEBUG_CHECKS |
| |
| /** |
| * @def CHIP_CONFIG_MEMORY_DEBUG_DMALLOC |
| * |
| * @brief |
| * Enable (1) or disable (0) malloc memory allocator support |
| * for dmalloc, an open-source debug malloc library. When enabled, |
| * additional checks and logging of allocations may be performed, |
| * with some performance cost. |
| * |
| * @note This configuration is most relevant when |
| * #CHIP_CONFIG_MEMORY_MGMT_MALLOC is set, but may also |
| * affect other configurations where application or platform |
| * code uses the malloc() family. |
| * |
| */ |
| #ifndef CHIP_CONFIG_MEMORY_DEBUG_DMALLOC |
| #define CHIP_CONFIG_MEMORY_DEBUG_DMALLOC 0 |
| #endif // CHIP_CONFIG_MEMORY_DEBUG_DMALLOC |
| |
| /** |
| * @def CHIP_CONFIG_SHA256_CONTEXT_SIZE |
| * |
| * @brief |
| * Size of the statically allocated context for SHA256 operations in CryptoPAL |
| * |
| * The default size is based on the Worst software implementation, OpenSSL. A |
| * static assert will tell us if we are wrong, since `typedef SHA_LONG unsigned |
| * int` is default. |
| * SHA_LONG h[8]; |
| * SHA_LONG Nl, Nh; |
| * SHA_LONG data[SHA_LBLOCK]; // SHA_LBLOCK is 16 for SHA256 |
| * unsigned int num, md_len; |
| * |
| * We also have to account for possibly some custom extensions on some targets, |
| * especially for mbedTLS, so an extra sizeof(uint64_t) is added to account. |
| * |
| */ |
| #ifndef CHIP_CONFIG_SHA256_CONTEXT_SIZE |
| #define CHIP_CONFIG_SHA256_CONTEXT_SIZE ((sizeof(unsigned int) * (8 + 2 + 16 + 2)) + sizeof(uint64_t)) |
| #endif // CHIP_CONFIG_SHA256_CONTEXT_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_MAX_UNSOLICITED_MESSAGE_HANDLERS |
| * |
| * @brief |
| * Maximum number of simultaneously active unsolicited message |
| * handlers. |
| * |
| */ |
| #ifndef CHIP_CONFIG_MAX_UNSOLICITED_MESSAGE_HANDLERS |
| #define CHIP_CONFIG_MAX_UNSOLICITED_MESSAGE_HANDLERS 8 |
| #endif // CHIP_CONFIG_MAX_UNSOLICITED_MESSAGE_HANDLERS |
| |
| /** |
| * @def CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS |
| * |
| * @brief |
| * Maximum number of simultaneously active exchange contexts. |
| * |
| */ |
| #ifndef CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS |
| #define CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS 16 |
| #endif // CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS |
| |
| /** |
| * @def CHIP_CONFIG_MCSP_RECEIVE_TABLE_SIZE |
| * |
| * @brief |
| * Size of the receive table for message counter synchronization protocol |
| * |
| */ |
| #ifndef CHIP_CONFIG_MCSP_RECEIVE_TABLE_SIZE |
| #define CHIP_CONFIG_MCSP_RECEIVE_TABLE_SIZE (CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS - 2) |
| #endif // CHIP_CONFIG_MCSP_RECEIVE_TABLE_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_MESSAGE_COUNTER_WINDOW_SIZE |
| * |
| * @brief |
| * Max number of messages behind message window can be accepted. |
| * |
| */ |
| #ifndef CHIP_CONFIG_MESSAGE_COUNTER_WINDOW_SIZE |
| #define CHIP_CONFIG_MESSAGE_COUNTER_WINDOW_SIZE 32 |
| #endif // CHIP_CONFIG_MESSAGE_COUNTER_WINDOW_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_DEFAULT_UDP_MTU_SIZE |
| * |
| * @brief |
| * The default MTU size for an IPv6 datagram carrying UDP. This is useful |
| * for senders who want to send UDP chip messages that fit within a single |
| * IPv6 datagram. |
| * |
| * 1280 is the guaranteed minimum IPv6 MTU. |
| * |
| */ |
| #ifndef CHIP_CONFIG_DEFAULT_UDP_MTU_SIZE |
| #define CHIP_CONFIG_DEFAULT_UDP_MTU_SIZE 1280 |
| #endif // CHIP_CONFIG_DEFAULT_UDP_MTU_SIZE |
| |
| /** |
| * @def CHIP_PORT |
| * |
| * @brief |
| * chip TCP/UDP port for secured chip traffic. |
| * |
| */ |
| #ifndef CHIP_PORT |
| #define CHIP_PORT 5540 |
| #endif // CHIP_PORT |
| |
| /** |
| * @def CHIP_UDC_PORT |
| * |
| * @brief |
| * chip TCP/UDP port for unsecured user-directed-commissioning traffic. |
| * |
| */ |
| #ifndef CHIP_UDC_PORT |
| #define CHIP_UDC_PORT CHIP_PORT + 10 |
| #endif // CHIP_UDC_PORT |
| |
| /** |
| * @def CHIP_CONFIG_SECURITY_TEST_MODE |
| * |
| * @brief |
| * Enable various features that make it easier to debug secure chip communication. |
| * |
| * @note |
| * WARNING: This option makes it possible to circumvent basic chip security functionality, |
| * including message encryption. Because of this it SHOULD NEVER BE ENABLED IN PRODUCTION BUILDS. |
| * |
| * To build with this flag, pass 'treat_warnings_as_errors=false' to gn/ninja. |
| */ |
| #ifndef CHIP_CONFIG_SECURITY_TEST_MODE |
| #define CHIP_CONFIG_SECURITY_TEST_MODE 0 |
| #endif // CHIP_CONFIG_SECURITY_TEST_MODE |
| |
| /** |
| * @def CHIP_CONFIG_TEST_SHARED_SECRET_VALUE |
| * |
| * @brief |
| * Shared secret to use for unit tests or when CHIP_CONFIG_SECURITY_TEST_MODE is enabled. |
| * |
| * This parameter is 32 bytes to maximize entropy passed to the CryptoContext::InitWithSecret KDF, |
| * and can be initialized either as a raw string or array of bytes. The default test secret of |
| * "Test secret for key derivation." results in the following encryption keys: |
| * |
| * 5E DE D2 44 E5 53 2B 3C DC 23 40 9D BA D0 52 D2 |
| * A9 E0 11 B1 73 7C 6D 4B 70 E4 C0 A2 FE 66 04 76 |
| */ |
| #ifndef CHIP_CONFIG_TEST_SHARED_SECRET_VALUE |
| #define CHIP_CONFIG_TEST_SHARED_SECRET_VALUE "Test secret for key derivation." |
| #endif // CHIP_CONFIG_TEST_SHARED_SECRET_VALUE |
| |
| /** |
| * @def CHIP_CONFIG_TEST_SHARED_SECRET_LENGTH |
| * |
| * @brief |
| * Length of the shared secret to use for unit tests or when CHIP_CONFIG_SECURITY_TEST_MODE is enabled. |
| * |
| * Note that the default value of 32 includes the null terminator. |
| * WARNING: `strlen(CHIP_CONFIG_TEST_SHARED_SECRET_VALUE)` will result in different keys |
| * than expected and give unexpected results for shared secrets that contain '\x00'. |
| */ |
| #ifndef CHIP_CONFIG_TEST_SHARED_SECRET_LENGTH |
| #define CHIP_CONFIG_TEST_SHARED_SECRET_LENGTH 32 |
| #endif // CHIP_CONFIG_TEST_SHARED_SECRET_LENGTH |
| |
| /** |
| * @def CHIP_CONFIG_CERT_MAX_RDN_ATTRIBUTES |
| * |
| * @brief |
| * The maximum number of Relative Distinguished Name (RDN) attributes |
| * supported by the CHIP Certificate Distinguished Names (DN). |
| * |
| */ |
| #ifndef CHIP_CONFIG_CERT_MAX_RDN_ATTRIBUTES |
| #define CHIP_CONFIG_CERT_MAX_RDN_ATTRIBUTES 5 |
| #endif // CHIP_CONFIG_CERT_MAX_RDN_ATTRIBUTES |
| |
| /** |
| * @def CHIP_ERROR_LOGGING |
| * |
| * @brief |
| * If asserted (1), enable logging of all messages in the |
| * chip::Logging::LogCategory::kLogCategory_Error category. |
| * |
| */ |
| #ifndef CHIP_ERROR_LOGGING |
| #define CHIP_ERROR_LOGGING 1 |
| #endif // CHIP_ERROR_LOGGING |
| |
| /** |
| * @def CHIP_PROGRESS_LOGGING |
| * |
| * @brief |
| * If asserted (1), enable logging of all messages in the |
| * chip::Logging::LogCategory::kLogCategory_Progress category. |
| * |
| */ |
| #ifndef CHIP_PROGRESS_LOGGING |
| #define CHIP_PROGRESS_LOGGING 1 |
| #endif // CHIP_PROGRESS_LOGGING |
| |
| /** |
| * @def CHIP_DETAIL_LOGGING |
| * |
| * @brief |
| * If asserted (1), enable logging of all messages in the |
| * chip::Logging::kLogCategory_Detail category. |
| * |
| */ |
| #ifndef CHIP_DETAIL_LOGGING |
| #define CHIP_DETAIL_LOGGING 1 |
| #endif // CHIP_DETAIL_LOGGING |
| |
| /** |
| * @def CHIP_AUTOMATION_LOGGING |
| * |
| * @brief |
| * If asserted (1), enable logging of all messages in the |
| * chip::Logging::kLogCategory_Automation category. |
| * |
| */ |
| #ifndef CHIP_AUTOMATION_LOGGING |
| #define CHIP_AUTOMATION_LOGGING 1 |
| #endif // CHIP_AUTOMATION_LOGGING |
| |
| /** |
| * @def CHIP_LOG_FILTERING |
| * |
| * @brief |
| * If asserted (1), enable runtime log level configuration. |
| */ |
| #ifndef CHIP_LOG_FILTERING |
| #define CHIP_LOG_FILTERING 1 |
| #endif |
| |
| /** |
| * CHIP_CONFIG_LOG_MESSAGE_MAX_SIZE |
| * |
| * The maximum size (in bytes) of a log message |
| */ |
| #ifndef CHIP_CONFIG_LOG_MESSAGE_MAX_SIZE |
| #define CHIP_CONFIG_LOG_MESSAGE_MAX_SIZE 256 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_ENABLE_CONDITION_LOGGING |
| * |
| * @brief |
| * If asserted (1), enable logging of failed conditions via the |
| * ChipLogIfFalse() macro. |
| */ |
| #ifndef CHIP_CONFIG_ENABLE_CONDITION_LOGGING |
| #define CHIP_CONFIG_ENABLE_CONDITION_LOGGING 0 |
| #endif // CHIP_CONFIG_ENABLE_CONDITION_LOGGING |
| |
| /** |
| * @def CHIP_CONFIG_TEST |
| * |
| * @brief |
| * If asserted (1), enable APIs that help implement |
| * unit and integration tests. |
| * |
| */ |
| #ifndef CHIP_CONFIG_TEST |
| #define CHIP_CONFIG_TEST 0 |
| #endif // CHIP_CONFIG_TEST |
| |
| /** |
| * @def CHIP_CONFIG_ERROR_SOURCE |
| * |
| * If asserted (1), then CHIP_ERROR constants will include the source location of their expansion. |
| */ |
| #ifndef CHIP_CONFIG_ERROR_SOURCE |
| #define CHIP_CONFIG_ERROR_SOURCE 0 |
| #endif // CHIP_CONFIG_ERROR_SOURCE |
| |
| /** |
| * @def CHIP_CONFIG_ERROR_SOURCE_NO_ERROR |
| * |
| * If asserted (1) along with CHIP_CONFIG_ERROR_SOURCE, then instances of CHIP_NO_ERROR will also include |
| * the source location of their expansion. Otherwise, CHIP_NO_ERROR is excluded from source tracking. |
| */ |
| #ifndef CHIP_CONFIG_ERROR_SOURCE_NO_ERROR |
| #define CHIP_CONFIG_ERROR_SOURCE_NO_ERROR 1 |
| #endif // CHIP_CONFIG_ERROR_SOURCE |
| |
| /** |
| * @def CHIP_CONFIG_ERROR_FORMAT_AS_STRING |
| * |
| * If 0, then ChipError::Format() returns an integer (ChipError::StorageType). |
| * If 1, then ChipError::Format() returns a const char *, from chip::ErrorStr(). |
| * In either case, the macro CHIP_ERROR_FORMAT expands to a suitable printf format. |
| */ |
| |
| #ifndef CHIP_CONFIG_ERROR_FORMAT_AS_STRING |
| #define CHIP_CONFIG_ERROR_FORMAT_AS_STRING 0 |
| #endif // CHIP_CONFIG_ERROR_FORMAT_AS_STRING |
| |
| /** |
| * @def CHIP_CONFIG_SHORT_ERROR_STR |
| * |
| * @brief |
| * If asserted (1), produce shorter error strings that only carry a |
| * minimum of information. |
| * |
| */ |
| #ifndef CHIP_CONFIG_SHORT_ERROR_STR |
| #define CHIP_CONFIG_SHORT_ERROR_STR 0 |
| #endif // CHIP_CONFIG_SHORT_ERROR_STR |
| |
| /** |
| * @def CHIP_CONFIG_ERROR_STR_SIZE |
| * |
| * @brief |
| * This defines the size of the buffer to store a formatted error string. |
| * If the formatting of an error string exceeds this size it will be truncated. |
| * |
| * The default size varies based on the CHIP_CONFIG_SHORT_ERROR_STR option. |
| * |
| * When CHIP_CONFIG_SHORT_ERROR_STR is 0, a large default buffer size is used |
| * to accommodate descriptive text summarizing the cause of the error. E.g.: |
| * |
| * "chip Error 4047 (0x00000FCF): Invalid Argument" |
| * |
| * When CHIP_CONFIG_SHORT_ERROR_STR is 1, the buffer size is set to accommodate |
| * a minimal error string consisting of a 10 character subsystem name followed |
| * by an 8 character error number, plus boilerplate. E.g.: |
| * |
| * "Error chip:0x00000FCF" |
| * |
| */ |
| #ifndef CHIP_CONFIG_ERROR_STR_SIZE |
| #if CHIP_CONFIG_SHORT_ERROR_STR |
| #define CHIP_CONFIG_ERROR_STR_SIZE (5 + 1 + 10 + 3 + 8 + 1) |
| #else // CHIP_CONFIG_SHORT_ERROR_STR |
| #define CHIP_CONFIG_ERROR_STR_SIZE 256 |
| #endif // CHIP_CONFIG_SHORT_ERROR_STR |
| #endif // CHIP_CONFIG_ERROR_STR_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_CUSTOM_ERROR_FORMATTER |
| * |
| * @brief |
| * If asserted (1), suppress definition of the standard error formatting function |
| * (#FormatError()) allowing an application-specific implementation to be used. |
| * |
| */ |
| #ifndef CHIP_CONFIG_CUSTOM_ERROR_FORMATTER |
| #define CHIP_CONFIG_CUSTOM_ERROR_FORMATTER 0 |
| #endif // CHIP_CONFIG_CUSTOM_ERROR_FORMATTER |
| |
| /** |
| * @def CHIP_CONFIG_SHORT_FORM_ERROR_VALUE_FORMAT |
| * |
| * @brief |
| * The printf-style format string used to format error values. |
| * |
| * On some platforms, the structure of error values makes them more convenient to |
| * read in either hex or decimal format. This option can be used to override |
| * the default hex format. |
| * |
| * Note that this option only affects short-form error strings (i.e. when |
| * CHIP_CONFIG_SHORT_ERROR_STR == 1). Long form error strings always show both hex |
| * and decimal values |
| */ |
| #ifndef CHIP_CONFIG_SHORT_FORM_ERROR_VALUE_FORMAT |
| #define CHIP_CONFIG_SHORT_FORM_ERROR_VALUE_FORMAT "0x%08" PRIX32 |
| #endif // CHIP_CONFIG_SHORT_FORM_ERROR_VALUE_FORMAT |
| |
| /** |
| * @def CHIP_CONFIG_BLE_PKT_RESERVED_SIZE |
| * |
| * @brief |
| * The number of bytes that chip should reserve at the front of |
| * every outgoing BLE packet for the sake of the underlying BLE |
| * stack. |
| * |
| */ |
| #ifndef CHIP_CONFIG_BLE_PKT_RESERVED_SIZE |
| #define CHIP_CONFIG_BLE_PKT_RESERVED_SIZE 0 |
| #endif // CHIP_CONFIG_BLE_PKT_RESERVED_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_IsPlatformErrorNonCritical(CODE) |
| * |
| * This macro checks if a platform generated error is critical and |
| * needs to be reported to the application/caller. The criticality |
| * of an error (in the context of that platform) is determined by how |
| * it impacts the logic flow, i.e., whether or not the current flow |
| * can continue despite the error or it needs to be reported back |
| * resulting in a potential stoppage. |
| * |
| * @note |
| * This is a default set of platform errors which are configured as |
| * non-critical from the context of that platform. Any new error that |
| * the platforms deem as non-critical could be added by overriding |
| * this default macro definition after careful thought towards its |
| * implication in the logic flow in that platform. |
| * |
| * @param[in] CODE The #CHIP_ERROR being checked for criticality. |
| * |
| * @return true if the error is non-critical; false otherwise. |
| * |
| */ |
| #ifndef CHIP_CONFIG_IsPlatformErrorNonCritical |
| #if CHIP_SYSTEM_CONFIG_USE_LWIP |
| #define _CHIP_CONFIG_IsPlatformLwIPErrorNonCritical(CODE) \ |
| ((CODE) == chip::System::MapErrorLwIP(ERR_RTE) || (CODE) == chip::System::MapErrorLwIP(ERR_MEM)) |
| #else // !CHIP_SYSTEM_CONFIG_USE_LWIP |
| #define _CHIP_CONFIG_IsPlatformLwIPErrorNonCritical(CODE) 0 |
| #endif // !CHIP_SYSTEM_CONFIG_USE_LWIP |
| |
| #if CHIP_SYSTEM_CONFIG_USE_SOCKETS |
| #define _CHIP_CONFIG_IsPlatformPOSIXErrorNonCritical(CODE) \ |
| ((CODE) == CHIP_ERROR_POSIX(EHOSTUNREACH) || (CODE) == CHIP_ERROR_POSIX(ENETUNREACH) || \ |
| (CODE) == CHIP_ERROR_POSIX(EADDRNOTAVAIL) || (CODE) == CHIP_ERROR_POSIX(EPIPE)) |
| #else // !CHIP_SYSTEM_CONFIG_USE_SOCKETS |
| #define _CHIP_CONFIG_IsPlatformPOSIXErrorNonCritical(CODE) 0 |
| #endif // !CHIP_SYSTEM_CONFIG_USE_SOCKETS |
| |
| #define CHIP_CONFIG_IsPlatformErrorNonCritical(CODE) \ |
| (_CHIP_CONFIG_IsPlatformPOSIXErrorNonCritical(CODE) || _CHIP_CONFIG_IsPlatformLwIPErrorNonCritical(CODE)) |
| #endif // CHIP_CONFIG_IsPlatformErrorNonCritical |
| |
| /** |
| * @def CHIP_CONFIG_PERSISTED_STORAGE_KEY_TYPE |
| * |
| * @brief |
| * The data type used to represent the key of a persistedly-stored |
| * key/value pair. |
| */ |
| #ifndef CHIP_CONFIG_PERSISTED_STORAGE_KEY_TYPE |
| #define CHIP_CONFIG_PERSISTED_STORAGE_KEY_TYPE const char * |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_LIFETIIME_PERSISTED_COUNTER_KEY |
| * |
| * @brief |
| * Lifetime Counter Key. |
| */ |
| #ifndef CHIP_CONFIG_LIFETIIME_PERSISTED_COUNTER_KEY |
| #define CHIP_CONFIG_LIFETIIME_PERSISTED_COUNTER_KEY "life-count" |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_PERSISTED_STORAGE_ENC_MSG_CNTR_ID |
| * |
| * @brief |
| * The group key message counter persisted storage Id. |
| * |
| */ |
| #ifndef CHIP_CONFIG_PERSISTED_STORAGE_ENC_MSG_CNTR_ID |
| #define CHIP_CONFIG_PERSISTED_STORAGE_ENC_MSG_CNTR_ID "EncMsgCntr" |
| #endif // CHIP_CONFIG_PERSISTED_STORAGE_ENC_MSG_CNTR_ID |
| |
| /** |
| * @def CHIP_CONFIG_PERSISTED_STORAGE_MAX_KEY_LENGTH |
| * |
| * @brief The maximum length of the key in a key/value pair |
| * stored in the platform's persistent storage. |
| */ |
| #ifndef CHIP_CONFIG_PERSISTED_STORAGE_MAX_KEY_LENGTH |
| #define CHIP_CONFIG_PERSISTED_STORAGE_MAX_KEY_LENGTH 16 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_PERSISTED_COUNTER_DEBUG_LOGGING |
| * |
| * @brief Enable debug logging for the PersistedCounter API. |
| */ |
| #ifndef CHIP_CONFIG_PERSISTED_COUNTER_DEBUG_LOGGING |
| #define CHIP_CONFIG_PERSISTED_COUNTER_DEBUG_LOGGING 0 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EVENT_LOGGING_VERBOSE_DEBUG_LOGS |
| * |
| * @brief Enable verbose debug logging for the EventLogging API. |
| * This setting is incompatible with platforms that route console |
| * logs into event logging, as it would result in circular logic. |
| */ |
| #ifndef CHIP_CONFIG_EVENT_LOGGING_VERBOSE_DEBUG_LOGS |
| #define CHIP_CONFIG_EVENT_LOGGING_VERBOSE_DEBUG_LOGS 1 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_ENABLE_ARG_PARSER |
| * |
| * @brief Enable support functions for parsing command-line arguments |
| */ |
| #ifndef CHIP_CONFIG_ENABLE_ARG_PARSER |
| #define CHIP_CONFIG_ENABLE_ARG_PARSER 0 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_ENABLE_ARG_PARSER_VALIDITY_CHECKS |
| * |
| * @brief Enable validity checking of command-line argument definitions. |
| * |
| * // TODO: Determine why we wouldn't need this |
| */ |
| #ifndef CHIP_CONFIG_ENABLE_ARG_PARSER_VALIDITY_CHECKS |
| #define CHIP_CONFIG_ENABLE_ARG_PARSER_VALIDITY_CHECKS 1 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_UNAUTHENTICATED_CONNECTION_POOL_SIZE |
| * |
| * @brief Define the size of the pool used for tracking Matter unauthenticated |
| * message states. The entries in the pool are automatically rotated by LRU. The size |
| * of the pool limits how many PASE and CASE pairing sessions can be processed |
| * simultaneously. |
| */ |
| #ifndef CHIP_CONFIG_UNAUTHENTICATED_CONNECTION_POOL_SIZE |
| #define CHIP_CONFIG_UNAUTHENTICATED_CONNECTION_POOL_SIZE 4 |
| #endif // CHIP_CONFIG_UNAUTHENTICATED_CONNECTION_POOL_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_SECURE_SESSION_POOL_SIZE |
| * |
| * @brief Defines the size of the pool used for tracking the state of |
| * secure sessions. This controls the maximum number of concurrent |
| * established secure sessions across all supported transports. |
| * |
| * This is sized by default to cover the sum of the following: |
| * - At least 3 CASE sessions / fabric (Spec Ref: 4.13.2.8) |
| * - 1 reserved slot for CASEServer as a responder. |
| * - 1 reserved slot for PASE. |
| * |
| * NOTE: On heap-based platforms, there is no pre-allocation of the pool. |
| * Due to the use of an LRU-scheme to manage sessions, the actual active |
| * size of the pool will grow up to the value of this define, |
| * after which, it will remain at or around this size indefinitely. |
| * |
| */ |
| #ifndef CHIP_CONFIG_SECURE_SESSION_POOL_SIZE |
| #define CHIP_CONFIG_SECURE_SESSION_POOL_SIZE (CHIP_CONFIG_MAX_FABRICS * 3 + 2) |
| #endif // CHIP_CONFIG_SECURE_SESSION_POOL_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_SECURE_SESSION_REFCOUNT_LOGGING |
| * |
| * @brief This enables logging of changes to the underlying reference count of |
| * SecureSession objects. |
| * |
| */ |
| #ifndef CHIP_CONFIG_SECURE_SESSION_REFCOUNT_LOGGING |
| #define CHIP_CONFIG_SECURE_SESSION_REFCOUNT_LOGGING 0 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_MAX_FABRICS |
| * |
| * @brief |
| * Maximum number of fabrics the device can participate in. Each fabric can |
| * provision the device with its unique operational credentials and manage |
| * its own access control lists. |
| */ |
| #ifndef CHIP_CONFIG_MAX_FABRICS |
| #define CHIP_CONFIG_MAX_FABRICS 16 |
| #endif // CHIP_CONFIG_MAX_FABRICS |
| |
| /** |
| * @def CHIP_CONFIG_MAX_GROUP_DATA_PEERS |
| * |
| * @brief |
| * Maximum number of Peer within a fabric that can send group data message to a device. |
| * |
| * // TODO: Determine a better value for this |
| */ |
| #ifndef CHIP_CONFIG_MAX_GROUP_DATA_PEERS |
| #define CHIP_CONFIG_MAX_GROUP_DATA_PEERS 15 |
| #endif // CHIP_CONFIG_MAX_GROUP_DATA_PEERS |
| |
| /** |
| * @def CHIP_CONFIG_MAX_GROUP_CONTROL_PEERS |
| * |
| * @brief |
| * Maximum number of Peer within a fabric that can send group control message to a device. |
| */ |
| #ifndef CHIP_CONFIG_MAX_GROUP_CONTROL_PEERS |
| #define CHIP_CONFIG_MAX_GROUP_CONTROL_PEERS 2 |
| #endif // CHIP_CONFIG_MAX_GROUP_CONTROL_PEER |
| |
| /** |
| * @def CHIP_CONFIG_SLOW_CRYPTO |
| * |
| * @brief |
| * When enabled, CASE and PASE setup will proactively send standalone acknowledgements |
| * prior to engaging in crypto operations. |
| */ |
| #ifndef CHIP_CONFIG_SLOW_CRYPTO |
| #define CHIP_CONFIG_SLOW_CRYPTO 1 |
| #endif // CHIP_CONFIG_SLOW_CRYPTO |
| |
| /** |
| * @def CHIP_NON_PRODUCTION_MARKER |
| * |
| * @brief Defines the name of a mark symbol whose presence signals that the chip code |
| * includes development/testing features that should never be used in production contexts. |
| */ |
| #ifndef CHIP_NON_PRODUCTION_MARKER |
| #if (CHIP_CONFIG_SECURITY_TEST_MODE || CHIP_FUZZING_ENABLED) |
| #define CHIP_NON_PRODUCTION_MARKER WARNING__DO_NOT_SHIP__CONTAINS_NON_PRODUCTION_CHIP_CODE |
| #endif |
| #endif |
| |
| #ifdef CHIP_NON_PRODUCTION_MARKER |
| extern const char CHIP_NON_PRODUCTION_MARKER[]; |
| #endif |
| |
| /** |
| * @def CHIP_COMMISSIONING_HINT_TABLE |
| * |
| * @brief Defines the set of "pairing hint" values that can be set in |
| * the PH key in commissionable node discovery response. |
| */ |
| #ifndef CHIP_COMMISSIONING_HINT_TABLE |
| #define CHIP_COMMISSIONING_HINT_TABLE |
| #define CHIP_COMMISSIONING_HINT_INDEX_POWER_CYCLE 0 |
| #define CHIP_COMMISSIONING_HINT_INDEX_MANUFACTURER_URL 1 |
| #define CHIP_COMMISSIONING_HINT_INDEX_SEE_ADMINISTRATOR_UX 2 |
| #define CHIP_COMMISSIONING_HINT_INDEX_SEE_SETTINGS_MENU 3 |
| #define CHIP_COMMISSIONING_HINT_INDEX_CUSTOM_INSTRUCTION 4 |
| #define CHIP_COMMISSIONING_HINT_INDEX_SEE_MANUAL 5 |
| #define CHIP_COMMISSIONING_HINT_INDEX_PRESS_RESET 6 |
| #define CHIP_COMMISSIONING_HINT_INDEX_PRESS_RESET_WITH_POWER 7 |
| #define CHIP_COMMISSIONING_HINT_INDEX_PRESS_RESET_SECONDS 8 |
| #define CHIP_COMMISSIONING_HINT_INDEX_PRESS_RESET_UNTIL_BLINK 9 |
| #define CHIP_COMMISSIONING_HINT_INDEX_PRESS_RESET_SECONDS_WITH_POWER 10 |
| #define CHIP_COMMISSIONING_HINT_INDEX_PRESS_RESET_UNTIL_BLINK_WITH_POWER 11 |
| #endif |
| |
| /** |
| * @name Interaction Model object pool configuration. |
| * |
| * @brief |
| * The following definitions sets the maximum number of corresponding interaction model object pool size. |
| * |
| * * #CHIP_IM_MAX_NUM_COMMAND_HANDLER |
| * * #CHIP_IM_MAX_NUM_READS |
| * * #CHIP_IM_MAX_NUM_SUBSCRIPTIONS |
| * * #CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS_FOR_SUBSCRIPTIONS |
| * * #CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS_FOR_READS |
| * * #CHIP_IM_MAX_REPORTS_IN_FLIGHT |
| * * #CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS |
| * * #CHIP_IM_SERVER_MAX_NUM_DIRTY_SET |
| * * #CHIP_IM_MAX_NUM_WRITE_HANDLER |
| * * #CHIP_IM_MAX_NUM_WRITE_CLIENT |
| * * #CHIP_IM_MAX_NUM_TIMED_HANDLER |
| * |
| * @{ |
| */ |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_COMMAND_HANDLER |
| * |
| * @brief Defines the maximum number of CommandHandler, limits the number of active commands transactions on server. |
| */ |
| #ifndef CHIP_IM_MAX_NUM_COMMAND_HANDLER |
| #define CHIP_IM_MAX_NUM_COMMAND_HANDLER 4 |
| #endif |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_SUBSCRIPTIONS |
| * |
| * @brief Defines the maximum number of ReadHandler for subscriptions, limits the number of active subscription transactions on |
| * server. |
| * |
| * The default value comes from 3sub per fabric * max number of fabrics. |
| * |
| */ |
| #ifndef CHIP_IM_MAX_NUM_SUBSCRIPTIONS |
| #define CHIP_IM_MAX_NUM_SUBSCRIPTIONS (CHIP_CONFIG_MAX_FABRICS * 3) |
| #endif |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_READS |
| * |
| * @brief Defines the maximum number of ReadHandler for read transactions, limits the number of active read transactions on |
| * server. |
| * |
| * The default value is one per fabric * max number of fabrics. |
| */ |
| #ifndef CHIP_IM_MAX_NUM_READS |
| #define CHIP_IM_MAX_NUM_READS (CHIP_CONFIG_MAX_FABRICS) |
| #endif |
| |
| /** |
| * @def CHIP_IM_MAX_REPORTS_IN_FLIGHT |
| * |
| * @brief Defines the maximum number of Reports, limits the traffic of read and subscription transactions. |
| */ |
| #ifndef CHIP_IM_MAX_REPORTS_IN_FLIGHT |
| #define CHIP_IM_MAX_REPORTS_IN_FLIGHT 4 |
| #endif |
| |
| /** |
| * @def CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS_FOR_SUBSCRIPTIONS |
| * |
| * @brief The maximum number of path objects for subscriptions, limits the number of attributes being subscribed at the same time. |
| */ |
| #ifndef CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS_FOR_SUBSCRIPTIONS |
| #define CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS_FOR_SUBSCRIPTIONS (CHIP_IM_MAX_NUM_SUBSCRIPTIONS * 3) |
| #endif |
| |
| /** |
| * @def CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS_FOR_READS |
| * |
| * @brief Defines the maximum number of path objects for read requests. |
| */ |
| #ifndef CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS_FOR_READS |
| #define CHIP_IM_SERVER_MAX_NUM_PATH_GROUPS_FOR_READS (CHIP_IM_MAX_NUM_READS * 9) |
| #endif |
| |
| /** |
| * @def CHIP_IM_SERVER_MAX_NUM_DIRTY_SET |
| * |
| * @brief Defines the maximum number of dirty set, limits the number of attributes being read or subscribed at the same time. |
| */ |
| #ifndef CHIP_IM_SERVER_MAX_NUM_DIRTY_SET |
| #define CHIP_IM_SERVER_MAX_NUM_DIRTY_SET 8 |
| #endif |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_WRITE_HANDLER |
| * |
| * @brief Defines the maximum number of WriteHandler, limits the number of active write transactions on server. |
| */ |
| #ifndef CHIP_IM_MAX_NUM_WRITE_HANDLER |
| #define CHIP_IM_MAX_NUM_WRITE_HANDLER 4 |
| #endif |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_WRITE_CLIENT |
| * |
| * @brief Defines the maximum number of WriteClient, limits the number of active write transactions on client. |
| */ |
| #ifndef CHIP_IM_MAX_NUM_WRITE_CLIENT |
| #define CHIP_IM_MAX_NUM_WRITE_CLIENT 4 |
| #endif |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_TIMED_HANDLER |
| * |
| * @brief Defines the maximum number of TimedHandler, limits the number of |
| * active timed interactions waiting for the Invoke or Write. |
| */ |
| #ifndef CHIP_IM_MAX_NUM_TIMED_HANDLER |
| #define CHIP_IM_MAX_NUM_TIMED_HANDLER 8 |
| #endif |
| |
| /** |
| * @def CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| * |
| * @brief Defines whether we're currently building for unit testing, which enables a set of features |
| * that are only utilized in those tests. This flag should not be enabled on devices. If you have a test |
| * that uses this flag, either appropriately conditionalize the entire test on this flag, or to exclude |
| * the compliation of that test source file entirely. |
| */ |
| #ifndef CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| #define CONFIG_BUILD_FOR_HOST_UNIT_TEST 0 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_LAMBDA_EVENT_SIZE |
| * |
| * @brief The maximum size of the lambda which can be post into system event queue. |
| */ |
| #ifndef CHIP_CONFIG_LAMBDA_EVENT_SIZE |
| #define CHIP_CONFIG_LAMBDA_EVENT_SIZE (24) |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_LAMBDA_EVENT_ALIGN |
| * |
| * @brief The maximum alignment of the lambda which can be post into system event queue. |
| */ |
| #ifndef CHIP_CONFIG_LAMBDA_EVENT_ALIGN |
| #define CHIP_CONFIG_LAMBDA_EVENT_ALIGN (sizeof(void *)) |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_VERBOSE_VERIFY_OR_DIE |
| * |
| * @brief If true, VerifyOrDie() calls with no message will use an |
| * automatically generated message that makes it clear what failed. |
| */ |
| #ifndef CHIP_CONFIG_VERBOSE_VERIFY_OR_DIE |
| #define CHIP_CONFIG_VERBOSE_VERIFY_OR_DIE 0 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_CONTROLLER_MAX_ACTIVE_DEVICES |
| * |
| * @brief Number of devices a controller can be simultaneously connected to |
| */ |
| #ifndef CHIP_CONFIG_CONTROLLER_MAX_ACTIVE_DEVICES |
| #define CHIP_CONFIG_CONTROLLER_MAX_ACTIVE_DEVICES 64 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_CONTROLLER_MAX_ACTIVE_CASE_CLIENTS |
| * |
| * @brief Number of outgoing CASE sessions can be simutaneously negotiated. |
| */ |
| #ifndef CHIP_CONFIG_CONTROLLER_MAX_ACTIVE_CASE_CLIENTS |
| #define CHIP_CONFIG_CONTROLLER_MAX_ACTIVE_CASE_CLIENTS 16 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_DEVICE_MAX_ACTIVE_CASE_CLIENTS |
| * |
| * @brief Number of outgoing CASE sessions can be simutaneously negotiated on an end device. |
| */ |
| #ifndef CHIP_CONFIG_DEVICE_MAX_ACTIVE_CASE_CLIENTS |
| #define CHIP_CONFIG_DEVICE_MAX_ACTIVE_CASE_CLIENTS 2 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_DEVICE_MAX_ACTIVE_DEVICES |
| * |
| * @brief Number of devices to which the `Server` implementers will be able to |
| * concurrently connect over CASE and interact with. Relates to OTA |
| * requestor queries and bindings that can be operated. This is *global*, |
| * not *per fabric*. |
| * |
| * TODO: Determine how to better explain this. |
| */ |
| #ifndef CHIP_CONFIG_DEVICE_MAX_ACTIVE_DEVICES |
| #define CHIP_CONFIG_DEVICE_MAX_ACTIVE_DEVICES 4 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_MAX_GROUP_ENDPOINTS_PER_FABRIC |
| * |
| * @brief Defines the number of "endpoint->controlling group" mappings per fabric. |
| * |
| * Binds to number of GroupMapping entries per fabric |
| */ |
| #ifndef CHIP_CONFIG_MAX_GROUP_ENDPOINTS_PER_FABRIC |
| #define CHIP_CONFIG_MAX_GROUP_ENDPOINTS_PER_FABRIC 1 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_MAX_GROUPS_PER_FABRIC |
| * |
| * @brief Defines the number of groups supported per fabric, see Group Key Management Cluster in specification. |
| * |
| * Binds to number of GroupState entries to support per fabric |
| */ |
| #ifndef CHIP_CONFIG_MAX_GROUPS_PER_FABRIC |
| #define CHIP_CONFIG_MAX_GROUPS_PER_FABRIC (4 * CHIP_CONFIG_MAX_GROUP_ENDPOINTS_PER_FABRIC) |
| #endif |
| |
| #if CHIP_CONFIG_MAX_GROUPS_PER_FABRIC < (4 * CHIP_CONFIG_MAX_GROUP_ENDPOINTS_PER_FABRIC) |
| #error "Please ensure CHIP_CONFIG_MAX_GROUPS_PER_FABRIC meets minimum requirements. See Group Limits in the specification." |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_MAX_GROUPS_PER_FABRIC |
| * |
| * @brief Defines the number of groups key sets supported per fabric, see Group Key Management Cluster in specification. |
| * |
| * Binds to number of KeySet entries to support per fabric (Need at least 1 for Identity Protection Key) |
| */ |
| #ifndef CHIP_CONFIG_MAX_GROUP_KEYS_PER_FABRIC |
| #define CHIP_CONFIG_MAX_GROUP_KEYS_PER_FABRIC 3 |
| #endif |
| |
| #if CHIP_CONFIG_MAX_GROUP_KEYS_PER_FABRIC < 1 |
| #error "Please ensure CHIP_CONFIG_MAX_GROUP_KEYS_PER_FABRIC > 0 to support at least the IPK." |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_MAX_GROUP_CONCURRENT_ITERATORS |
| * |
| * @brief Defines the number of simultaneous Group iterators that can be allocated |
| * |
| * Number of iterator instances that can be allocated at any one time |
| */ |
| #ifndef CHIP_CONFIG_MAX_GROUP_CONCURRENT_ITERATORS |
| #define CHIP_CONFIG_MAX_GROUP_CONCURRENT_ITERATORS 2 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_MAX_GROUP_NAME_LENGTH |
| * |
| * @brief Defines the maximum length of the group names |
| */ |
| #ifndef CHIP_CONFIG_MAX_GROUP_NAME_LENGTH |
| #define CHIP_CONFIG_MAX_GROUP_NAME_LENGTH 16 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_ENTRIES_PER_FABRIC |
| * |
| * Defines the number of access control entries supported per fabric in the |
| * example access control code. |
| */ |
| #ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_ENTRIES_PER_FABRIC |
| #define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_ENTRIES_PER_FABRIC 4 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_SUBJECTS_PER_ENTRY |
| * |
| * Defines the number of access control subjects supported per entry in the |
| * example access control code. |
| */ |
| #ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_SUBJECTS_PER_ENTRY |
| #define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_SUBJECTS_PER_ENTRY 4 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_TARGETS_PER_ENTRY |
| * |
| * Defines the number of access control targets supported per entry in the |
| * example access control code. |
| */ |
| #ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_TARGETS_PER_ENTRY |
| #define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_MAX_TARGETS_PER_ENTRY 3 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_STORAGE_POOL_SIZE |
| * |
| * Defines the entry storage pool size in the example access control code. |
| * It's possible to get by with only one. |
| */ |
| #ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_STORAGE_POOL_SIZE |
| #define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_STORAGE_POOL_SIZE 1 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_DELEGATE_POOL_SIZE |
| * |
| * Defines the entry delegate pool size in the example access control code. |
| * It's possible to get by with only one. |
| */ |
| #ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_DELEGATE_POOL_SIZE |
| #define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_DELEGATE_POOL_SIZE 1 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_ITERATOR_DELEGATE_POOL_SIZE |
| * |
| * Defines the entry iterator delegate pool size in the example access control code. |
| * It's possible to get by with only one. |
| */ |
| #ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_ITERATOR_DELEGATE_POOL_SIZE |
| #define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_ENTRY_ITERATOR_DELEGATE_POOL_SIZE 1 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FAST_COPY_SUPPORT |
| * |
| * Support fast copy in the example access control implementation. |
| * |
| * At least one of "fast" or "flexible" copy support must be enabled. |
| */ |
| #ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FAST_COPY_SUPPORT |
| #define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FAST_COPY_SUPPORT 1 |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FLEXIBLE_COPY_SUPPORT |
| * |
| * Support flexible copy in the example access control implementation. |
| * |
| * Only needed if mixing the example access control implementation with other |
| * non-example access control delegate implementations; omitting it saves space. |
| * |
| * At least one of "fast" or "flexible" copy support must be enabled. |
| */ |
| #ifndef CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FLEXIBLE_COPY_SUPPORT |
| #define CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FLEXIBLE_COPY_SUPPORT 0 |
| #endif |
| |
| #if !CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FAST_COPY_SUPPORT && !CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FLEXIBLE_COPY_SUPPORT |
| #error \ |
| "Please enable at least one of CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FAST_COPY_SUPPORT or CHIP_CONFIG_EXAMPLE_ACCESS_CONTROL_FLEXIBLE_COPY_SUPPORT" |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_CASE_SESSION_RESUME_CACHE_SIZE |
| * |
| * @brief |
| * Maximum number of CASE sessions that a device caches, that can be resumed |
| */ |
| #ifndef CHIP_CONFIG_CASE_SESSION_RESUME_CACHE_SIZE |
| #define CHIP_CONFIG_CASE_SESSION_RESUME_CACHE_SIZE (3 * CHIP_CONFIG_MAX_FABRICS) |
| #endif |
| |
| /** |
| * @def CHIP_CONFIG_EVENT_LOGGING_BYTE_THRESHOLD |
| * |
| * @brief The number of bytes written to the event logging system that |
| * will trigger Report Delivery. |
| * |
| * The configuration captures the number of bytes written to the event |
| * logging subsystem needed to trigger a report. For example, if an application wants to offload all DEBUG events |
| * reliably, the threshold should be set to less than the size of the |
| * DEBUG buffer (plus a slop factor to account for events generated |
| * during the scheduling and event offload). Similarly, if the |
| * application does not want to drop INFO events, the threshold should |
| * be set to the sum of DEBUG and INFO buffers (with the same |
| * correction). |
| * |
| */ |
| #ifndef CHIP_CONFIG_EVENT_LOGGING_BYTE_THRESHOLD |
| #define CHIP_CONFIG_EVENT_LOGGING_BYTE_THRESHOLD 512 |
| #endif /* CHIP_CONFIG_EVENT_LOGGING_BYTE_THRESHOLD */ |
| |
| /** |
| * @def CHIP_CONFIG_ENABLE_SERVER_IM_EVENT |
| * |
| * @brief Enable Interaction model Event support in server |
| */ |
| #ifndef CHIP_CONFIG_ENABLE_SERVER_IM_EVENT |
| #define CHIP_CONFIG_ENABLE_SERVER_IM_EVENT 1 |
| #endif |
| |
| /** |
| * Accepts receipt of invalid privacy flag usage that affected some early SVE2 test event implementations. |
| * When SVE2 started, group messages would be sent with the privacy flag enabled, but without privacy encrypting the message header. |
| * The issue was subsequently corrected in master, the 1.0 branch, and the SVE2 branch. |
| * This is a temporary workaround for interoperability with those erroneous early-SVE2 implementations. |
| * The cost of this compatibity mode is twice as many decryption steps per received group message. |
| * |
| * TODO(#24573): Remove this workaround once interoperability with legacy pre-SVE2 is no longer required. |
| */ |
| #ifndef CHIP_CONFIG_PRIVACY_ACCEPT_NONSPEC_SVE2 |
| #define CHIP_CONFIG_PRIVACY_ACCEPT_NONSPEC_SVE2 1 |
| #endif // CHIP_CONFIG_PRIVACY_ACCEPT_NONSPEC_SVE2 |
| |
| /** |
| * @def CHIP_RESUBSCRIBE_MAX_RETRY_WAIT_INTERVAL_MS |
| * |
| * @brief |
| * If auto resubscribe is enabled & default resubscription policy is used, |
| * specify the max wait time. |
| * This value was chosen so that the average wait time is 3600000 |
| * ((100 - CHIP_RESUBSCRIBE_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP) % of CHIP_RESUBSCRIBE_MAX_RETRY_WAIT_INTERVAL_MS) / 2 + |
| * (CHIP_RESUBSCRIBE_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP % of CHIP_RESUBSCRIBE_MAX_RETRY_WAIT_INTERVAL_MS) = average wait is |
| * 3600000 |
| */ |
| #ifndef CHIP_RESUBSCRIBE_MAX_RETRY_WAIT_INTERVAL_MS |
| #define CHIP_RESUBSCRIBE_MAX_RETRY_WAIT_INTERVAL_MS 5538000 |
| #endif |
| |
| /** |
| * @def CHIP_RESUBSCRIBE_MAX_FIBONACCI_STEP_INDEX |
| * |
| * @brief |
| * If auto resubscribe is enabled & default resubscription policy is used, |
| * specify the max fibonacci step index. |
| * This index must satisfy below conditions: |
| * 1 . Fibonacci(CHIP_RESUBSCRIBE_MAX_FIBONACCI_STEP_INDEX + 1) * CHIP_RESUBSCRIBE_WAIT_TIME_MULTIPLIER_MS > |
| * CHIP_RESUBSCRIBE_MAX_RETRY_WAIT_INTERVAL_MS 2 . Fibonacci(CHIP_RESUBSCRIBE_MAX_FIBONACCI_STEP_INDEX) * |
| * CHIP_RESUBSCRIBE_WAIT_TIME_MULTIPLIER_MS < CHIP_RESUBSCRIBE_MAX_RETRY_WAIT_INTERVAL_MS |
| * |
| */ |
| #ifndef CHIP_RESUBSCRIBE_MAX_FIBONACCI_STEP_INDEX |
| #define CHIP_RESUBSCRIBE_MAX_FIBONACCI_STEP_INDEX 14 |
| #endif |
| |
| /** |
| * @def CHIP_RESUBSCRIBE_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP |
| * |
| * @brief |
| * If auto resubscribe is enabled & default resubscription policy is used, |
| * specify the minimum wait |
| * time as a percentage of the max wait interval for that step. |
| * |
| */ |
| #ifndef CHIP_RESUBSCRIBE_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP |
| #define CHIP_RESUBSCRIBE_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP 30 |
| #endif |
| |
| /** |
| * @def CHIP_RESUBSCRIBE_WAIT_TIME_MULTIPLIER_MS |
| * |
| * @brief |
| * If auto resubscribe is enabled & default resubscription policy is used, |
| * specify the multiplier that multiplies the result of a fibonacci computation |
| * based on a specific index to provide a max wait time for |
| * a step. |
| * |
| */ |
| #ifndef CHIP_RESUBSCRIBE_WAIT_TIME_MULTIPLIER_MS |
| #define CHIP_RESUBSCRIBE_WAIT_TIME_MULTIPLIER_MS 10000 |
| #endif |
| |
| /* |
| * @def CHIP_CONFIG_MAX_ATTRIBUTE_STORE_ELEMENT_SIZE |
| * |
| * @brief Safety limit to ensure that we don't end up with a |
| * larger-than-expected buffer for temporary attribute storage (on the stack or |
| * in .bss). The SDK will fail to compile if this value is set below the value |
| * it thinks it needs for a buffer size that can store any simple (not list or |
| * struct) attribute value. |
| */ |
| #ifndef CHIP_CONFIG_MAX_ATTRIBUTE_STORE_ELEMENT_SIZE |
| // I can't figure out how to get all-clusters-app to sanely use a different |
| // value here, and that app includes TestCluster, which has very large string |
| // attributes (1000 octets, leading to a 1003 octet buffer). |
| #define CHIP_CONFIG_MAX_ATTRIBUTE_STORE_ELEMENT_SIZE 1003 |
| #endif // CHIP_CONFIG_MAX_ATTRIBUTE_STORE_ELEMENT_SIZE |
| |
| /* |
| * @def CHIP_CONFIG_MINMDNS_DYNAMIC_OPERATIONAL_RESPONDER_LIST |
| * |
| * @brief Enables usage of heap in the minmdns DNSSD implementation |
| * for tracking active operational responder lists. |
| * |
| * When this is not set, CHIP_CONFIG_MAX_FABRICS is used to determine |
| * and statically allocate pointers needed to track active |
| * operational responder lists. |
| */ |
| #ifndef CHIP_CONFIG_MINMDNS_DYNAMIC_OPERATIONAL_RESPONDER_LIST |
| #define CHIP_CONFIG_MINMDNS_DYNAMIC_OPERATIONAL_RESPONDER_LIST 0 |
| #endif // CHIP_CONFIG_MINMDNS_DYNAMIC_OPERATIONAL_RESPONDER_LIST |
| |
| /* |
| * @def CHIP_CONFIG_MINMDNS_MAX_PARALLEL_RESOLVES |
| * |
| * @brief Determines the maximum number of SRV records that can be processed in parallel. |
| * Affects maximum number of results received for browse requests |
| * (where a single packet may contain multiple SRV entries) |
| * or number of pending resolves that still require a AAAA IP record |
| * to be resolved. |
| */ |
| #ifndef CHIP_CONFIG_MINMDNS_MAX_PARALLEL_RESOLVES |
| #define CHIP_CONFIG_MINMDNS_MAX_PARALLEL_RESOLVES 2 |
| #endif // CHIP_CONFIG_MINMDNS_MAX_PARALLEL_RESOLVES |
| |
| /** |
| * def CHIP_CONFIG_MDNS_RESOLVE_LOOKUP_RESULTS |
| * |
| * @brief Determines the maximum number of node resolve results (PeerAddresses) to keep |
| * for establishing an operational session. |
| * |
| */ |
| #ifndef CHIP_CONFIG_MDNS_RESOLVE_LOOKUP_RESULTS |
| #define CHIP_CONFIG_MDNS_RESOLVE_LOOKUP_RESULTS 1 |
| #endif // CHIP_CONFIG_MDNS_RESOLVE_LOOKUP_RESULTS |
| |
| /* |
| * @def CHIP_CONFIG_NETWORK_COMMISSIONING_DEBUG_TEXT_BUFFER_SIZE |
| * |
| * @brief This buffer will used for holding debug text when handling synchronous invokes (AddOrUpdate / Reorder / Remove). Since we |
| * don't set this value for most cases and on most platforms, this value can be 0 to always ignore such field. |
| */ |
| #ifndef CHIP_CONFIG_NETWORK_COMMISSIONING_DEBUG_TEXT_BUFFER_SIZE |
| #define CHIP_CONFIG_NETWORK_COMMISSIONING_DEBUG_TEXT_BUFFER_SIZE 64 |
| #endif // CHIP_CONFIG_NETWORK_COMMISSIONING_DEBUG_TEXT_BUFFER_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_IM_STATUS_CODE_VERBOSE_FORMAT |
| * |
| * If 1, IM status codes, when logged, will be formatted as "0xNN (NameOfCode)" |
| * If 0, IM status codes, when logged, will be formatted as "0xNN" In either |
| * case, the macro ChipLogFormatIMStatus expands to a suitable printf format |
| * string, which already includes the '%' in it, to be used with |
| * ChipLogValueIMStatus(status). |
| */ |
| |
| #ifndef CHIP_CONFIG_IM_STATUS_CODE_VERBOSE_FORMAT |
| #define CHIP_CONFIG_IM_STATUS_CODE_VERBOSE_FORMAT 0 |
| #endif // CHIP_CONFIG_ERROR_FORMAT_AS_STRING |
| |
| /** |
| * @def CHIP_CONFIG_SETUP_CODE_PAIRER_DISCOVERY_TIMEOUT_SECS |
| * |
| * @brief |
| * This is the default timeout for the discovery of devices by |
| * the setup code pairer. |
| * |
| */ |
| #ifndef CHIP_CONFIG_SETUP_CODE_PAIRER_DISCOVERY_TIMEOUT_SECS |
| #define CHIP_CONFIG_SETUP_CODE_PAIRER_DISCOVERY_TIMEOUT_SECS 30 |
| #endif // CHIP_CONFIG_SETUP_CODE_PAIRER_DISCOVERY_TIMEOUT_SECS |
| |
| /** |
| * @def CHIP_CONFIG_NUM_CD_KEY_SLOTS |
| * |
| * @brief Number of custom CD signing keys supported by default CD keystore |
| * |
| */ |
| #ifndef CHIP_CONFIG_NUM_CD_KEY_SLOTS |
| #define CHIP_CONFIG_NUM_CD_KEY_SLOTS 5 |
| #endif // CHIP_CONFIG_NUM_CD_KEY_SLOTS |
| |
| /** |
| * @def CHIP_CONFIG_MAX_CLIENT_REG_PER_FABRIC |
| * |
| * @brief Defines the number of clients that can register for monitoring with a server |
| * see ClientMonitoring cluster for specification |
| */ |
| #ifndef CHIP_CONFIG_MAX_CLIENT_REG_PER_FABRIC |
| #define CHIP_CONFIG_MAX_CLIENT_REG_PER_FABRIC 1 |
| #endif // CHIP_CONFIG_MAX_CLIENT_REG_PER_FABRIC |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @def CHIP_CONFIG_MAX_SUBSCRIPTION_RESUMPTION_STORAGE_CONCURRENT_ITERATORS |
| * |
| * @brief Defines the number of simultaneous subscription resumption iterators that can be allocated |
| * |
| * Number of iterator instances that can be allocated at any one time |
| */ |
| #ifndef CHIP_CONFIG_MAX_SUBSCRIPTION_RESUMPTION_STORAGE_CONCURRENT_ITERATORS |
| #define CHIP_CONFIG_MAX_SUBSCRIPTION_RESUMPTION_STORAGE_CONCURRENT_ITERATORS 2 |
| #endif |