| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 3.4.7. [TC-WNCV-6.1] Basic Commands Verification [DUT as Client] |
| |
| PICS: |
| - WNCV.C |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| For DUT as client test cases, Chip-tool command used below are an example to verify the functionality. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: "Precondition" |
| verification: | |
| TH must support at least one of these (0xFFFC) FeatureMap attribute’s flag WNCV.S.F00(LF) and/or WNCV.S.F01(TL) |
| disabled: true |
| |
| - label: "Check UpOrOpen command" |
| verification: | |
| |
| disabled: true |
| |
| - label: "DUT sends UpOrOpen command to TH" |
| PICS: WNCV.C.C00.Tx |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| ./chip-tool windowcovering up-or-open 1 1 |
| |
| Verify the " DUT responds with request response" on TH(all-clusters-app): |
| |
| 1659945239.794637][2742:2742] CHIP:DMG: InvokeRequestMessage = |
| [1659945239.794680][2742:2742] CHIP:DMG: { |
| [1659945239.794718][2742:2742] CHIP:DMG: suppressResponse = false, |
| [1659945239.794762][2742:2742] CHIP:DMG: timedRequest = false, |
| [1659945239.794801][2742:2742] CHIP:DMG: InvokeRequests = |
| [1659945239.794851][2742:2742] CHIP:DMG: [ |
| [1659945239.794891][2742:2742] CHIP:DMG: CommandDataIB = |
| [1659945239.794936][2742:2742] CHIP:DMG: { |
| [1659945239.794997][2742:2742] CHIP:DMG: CommandPathIB = |
| [1659945239.795055][2742:2742] CHIP:DMG: { |
| [1659945239.795112][2742:2742] CHIP:DMG: EndpointId = 0x1, |
| [1659945239.795177][2742:2742] CHIP:DMG: ClusterId = 0x102, |
| [1659945239.795239][2742:2742] CHIP:DMG: CommandId = 0x0, |
| [1659945239.795297][2742:2742] CHIP:DMG: }, |
| [1659945239.795353][2742:2742] CHIP:DMG: |
| [1659945239.795403][2742:2742] CHIP:DMG: CommandFields = |
| [1659945239.795451][2742:2742] CHIP:DMG: { |
| [1659945239.795500][2742:2742] CHIP:DMG: }, |
| [1659945239.795547][2742:2742] CHIP:DMG: }, |
| [1659945239.795594][2742:2742] CHIP:DMG: |
| disabled: true |
| |
| - label: "Check DownOrClose command" |
| verification: | |
| |
| disabled: true |
| |
| - label: "DUT sends DownOrClose command to TH" |
| PICS: WNCV.C.C01.Tx |
| verification: | |
| ./chip-tool windowcovering down-or-close 1 1 |
| |
| |
| |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| [1659945343.976313][2742:2742] CHIP:DMG: InvokeRequestMessage = |
| [1659945343.976344][2742:2742] CHIP:DMG: { |
| [1659945343.976367][2742:2742] CHIP:DMG: suppressResponse = false, |
| [1659945343.976399][2742:2742] CHIP:DMG: timedRequest = false, |
| [1659945343.976424][2742:2742] CHIP:DMG: InvokeRequests = |
| [1659945343.976454][2742:2742] CHIP:DMG: [ |
| [1659945343.976479][2742:2742] CHIP:DMG: CommandDataIB = |
| [1659945343.976510][2742:2742] CHIP:DMG: { |
| [1659945343.976539][2742:2742] CHIP:DMG: CommandPathIB = |
| [1659945343.976571][2742:2742] CHIP:DMG: { |
| [1659945343.976605][2742:2742] CHIP:DMG: EndpointId = 0x1, |
| [1659945343.976639][2742:2742] CHIP:DMG: ClusterId = 0x102, |
| [1659945343.976672][2742:2742] CHIP:DMG: CommandId = 0x1, |
| [1659945343.976701][2742:2742] CHIP:DMG: }, |
| [1659945343.976734][2742:2742] CHIP:DMG: |
| [1659945343.976764][2742:2742] CHIP:DMG: CommandFields = |
| [1659945343.976792][2742:2742] CHIP:DMG: { |
| [1659945343.976823][2742:2742] CHIP:DMG: }, |
| [1659945343.976852][2742:2742] CHIP:DMG: }, |
| [1659945343.976882][2742:2742] CHIP:DMG: |
| [1659945343.976906][2742:2742] CHIP:DMG: ], |
| [1659945343.976936][2742:2742] CHIP:DMG: |
| [1659945343.976960][2742:2742] CHIP:DMG: InteractionModelRevision = 1 |
| [1659945343.976984][2742:2742] CHIP:DMG: }, |
| disabled: true |
| |
| - label: "Check StopMotion command" |
| verification: | |
| |
| disabled: true |
| |
| - label: "DUT sends a StopMotion command to TH" |
| PICS: WNCV.C.C02.Tx |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| ./chip-tool windowcovering stop-motion 1 1 |
| |
| |
| Verify the " DUT responds with request response" on TH(all-clusters-app): |
| |
| [1661859427.618059][2477:2477] CHIP:DMG: InvokeRequestMessage = |
| [1661859427.618086][2477:2477] CHIP:DMG: { |
| [1661859427.618112][2477:2477] CHIP:DMG: suppressResponse = false, |
| [1661859427.618140][2477:2477] CHIP:DMG: timedRequest = false, |
| [1661859427.618165][2477:2477] CHIP:DMG: InvokeRequests = |
| [1661859427.618196][2477:2477] CHIP:DMG: [ |
| [1661859427.618221][2477:2477] CHIP:DMG: CommandDataIB = |
| [1661859427.618252][2477:2477] CHIP:DMG: { |
| [1661859427.618279][2477:2477] CHIP:DMG: CommandPathIB = |
| [1661859427.618312][2477:2477] CHIP:DMG: { |
| [1661859427.618347][2477:2477] CHIP:DMG: EndpointId = 0x1, |
| [1661859427.618383][2477:2477] CHIP:DMG: ClusterId = 0x102, |
| [1661859427.618420][2477:2477] CHIP:DMG: CommandId = 0x2, |
| [1661859427.618452][2477:2477] CHIP:DMG: }, |
| [1661859427.618487][2477:2477] CHIP:DMG: |
| [1661859427.618516][2477:2477] CHIP:DMG: CommandFields = |
| [1661859427.618551][2477:2477] CHIP:DMG: { |
| [1661859427.618583][2477:2477] CHIP:DMG: }, |
| [1661859427.618613][2477:2477] CHIP:DMG: }, |
| [1661859427.618645][2477:2477] CHIP:DMG: |
| [1661859427.618670][2477:2477] CHIP:DMG: ], |
| [1661859427.618700][2477:2477] CHIP:DMG: |
| [1661859427.618724][2477:2477] CHIP:DMG: InteractionModelRevision = 1 |
| [1661859427.618747][2477:2477] CHIP:DMG: }, |
| [1661859427.618814][2477:2477] CHIP:DMG: AccessControl: checking f=1 a=c s=0x000000000001B669 t= c=0x0000_0102 e=1 p=o |
| [1661859427.618853][2477:2477] CHIP:DMG: AccessControl: allowed |
| [1661859427.618882][2477:2477] CHIP:DMG: Received command for Endpoint=1 Cluster=0x0000_0102 Command=0x0000_0002 |
| [1661859427.618914][2477:2477] CHIP:ZCL: StopMotion command received |
| [1661859427.618961][2477:2477] CHIP:DMG: Endpoint 1, Cluster 0x0000_0102 update version to f31db |
| |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| TH receives the DownOrClose command and knows this attribute for this cluster and provides a plausable value, DUT processes the values and operates normally |
| disabled: true |