| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 3.3.17. [TC-DD-3.17] Commissioning Flow - 21-digit Manual Pairing Code - |
| Negative Scenario [DUT - Commissioner] |
| |
| PICS: |
| - MCORE.ROLE.COMMISSIONER |
| - MCORE.DD.21_MANUAL_PC |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: |
| "Provide the 21-digit Manual Pairing Code from the Commissionee to the |
| DUT in any format supported by DUT" |
| verification: | |
| Verify in TH as server side |
| $ ./out/all-clusters-app/chip-all-clusters-app |
| |
| [1657203632.334400][13827:13827] CHIP:DL: Device Configuration: |
| [1657203632.334663][13827:13827] CHIP:DL: Serial Number: (not set) |
| [1657203632.334724][13827:13827] CHIP:DL: Vendor Id: 65521 (0xFFF1) |
| [1657203632.334801][13827:13827] CHIP:DL: Product Id: 32769 (0x8001) |
| [1657203632.334879][13827:13827] CHIP:DL: Hardware Version: 0 |
| [1657203632.334934][13827:13827] CHIP:DL: Setup Pin Code (0 for UNKNOWN/ERROR): 20202021 |
| [1657203632.334983][13827:13827] CHIP:DL: Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00) |
| [1657203632.335054][13827:13827] CHIP:DL: Manufacturing Date: (not set) |
| [1657203632.335109][13827:13827] CHIP:DL: Device Type: 65535 (0xFFFF) |
| [1657203632.335158][13827:13827] CHIP:-: ==== Onboarding payload for Standard Commissioning Flow ==== |
| [1657203632.335234][13827:13827] CHIP:SVR: SetupQRCode: [MT:-24J042C00KA0648G00] |
| [1657203632.335298][13827:13827] CHIP:SVR: Copy/paste the below URL in a browser to see the QR Code: |
| [1657203632.335348][13827:13827] CHIP:SVR: https://project-chip.github.io/connectedhomeip/qrcode.html?data=MT%3A-24J042C00KA0648G00 |
| [1657203632.335420][13827:13827] CHIP:SVR: Manual pairing code: [34970112332] |
| [1657203632.335470][13827:13827] CHIP:-: ==== Onboarding payload for Custom Commissioning Flows ==== |
| [1657203632.335532][13827:13827] CHIP:SVR: SetupQRCode: [MT:-24J0YXE00KA0648G00] |
| [1657203632.335589][13827:13827] CHIP:SVR: Copy/paste the below URL in a browser to see the QR Code: |
| [1657203632.335637][13827:13827] CHIP:SVR: https://project-chip.github.io/connectedhomeip/qrcode.html?data=MT%3A-24J0YXE00KA0648G00 |
| [1657203632.335712][13827:13827] CHIP:SVR: Manual pairing code: [749701123365521327694] |
| disabled: true |
| |
| - label: |
| "VERSION: Using the manual code from Step 1, generate a new manual |
| code but substituting out the current VERSION with an invalid VERSION: |
| 2" |
| verification: | |
| 1. Use chip-tool"s "payload verhoeff-generate" command to help generate the new, invalid Manual code |
| |
| $ ./chip-tool payload verhoeff-generate 84970112336552132769 |
| |
| Verify in DUT as client side |
| [1657238290868] [31968:16868160] CHIP: [SPL] Generating Character for: 84970112336552132769 |
| [1657238290868] [31968:16868160] CHIP: [SPL] Generated Char: 3 |
| |
| Manual code: 849701123365521327693 |
| disabled: true |
| |
| - label: |
| "Provide the Manual Pairing Code, generated in the previous step, to |
| the DUT in any format supported by the DUT" |
| verification: | |
| $ ./chip-tool pairing code 1 849701123365521327693 |
| |
| Verify in DUT as client side |
| [1657238348848] [31971:16868925] CHIP: [TOO] Run command failure: ../../examples/chip-tool/third_party/connectedhomeip/src/setup_payload/ManualSetupPayloadParser.cpp:137: CHIP Error 0x0000002F: Invalid argument |
| disabled: true |
| |
| - label: |
| "VID_PID_PRESENT: Using the manual code from Step 1, generate a new |
| manual code but substituting out the current VID_PID_PRESENT with an |
| invalid VID_PID_PRESENT set to 0" |
| verification: | |
| 1. Use chip-tool"s "payload verhoeff-generate" command to help generate the new, invalid Manual code |
| $ ./chip-tool payload verhoeff-generate 34970112336552132769 |
| |
| Verify in DUT as client side |
| [1651186492744] [13434:353094] CHIP: [SPL] Generating Character for: 34970112336552132769 |
| [1651186492744] [13434:353094] CHIP: [SPL] Generated Char: 6 |
| |
| Manual code: 349701123365521327696 |
| disabled: true |
| |
| - label: |
| "Provide the Manual Pairing Code, generated in the previous step, to |
| the DUT in any format supported by the DUT" |
| verification: | |
| $ ./chip-tool pairing code 1 349701123365521327696 |
| |
| Verify in DUT as client side |
| [1657238541643] [31975:16871084] CHIP: [SPL] Failed decoding base10. Input length 20 was not expected length 10 |
| ... |
| [1657238541644] [31975:16871079] CHIP: [TOO] Run command failure: ../../examples/chip-tool/third_party/connectedhomeip/src/setup_payload/ManualSetupPayloadParser.cpp:63: CHIP Error 0x0000001E: Invalid string length |
| disabled: true |
| |
| - label: |
| "SHORT DISCRIMINATOR: Using the manual code from Step 1, generate a |
| new manual code but substituting out the current SHORT DISCRIMINATOR |
| string with a discriminator value that makes the generated manual code |
| differ from Step 1s manual code (i.e. Choose a discriminator value |
| that changes any of the 4 most-significant bits of Step 1s 12-bit |
| discriminator value and adheres to rules of section 5.1.1.5. |
| Discriminator value)" |
| verification: | |
| 1. Use chip-tool"s "payload generate-manualcode" command to help generate the new, invalid Manual code |
| |
| Verify in DUT as client side |
| $ ./chip-tool payload generate-manualcode --existing-payload 749701123365521327694 --allow-invalid-payload 1 --discriminator 3584 |
| [1657238783501] [31989:16873588] CHIP: [TOO] Manual Code: 733317123365521327692 |
| disabled: true |
| |
| - label: |
| "Provide the Manual Pairing Code, generated in the previous step, to |
| the DUT in any format supported by the DUT" |
| verification: | |
| $ ./chip-tool pairing code 1 733317123365521327692 |
| |
| Verify in DUT as client side |
| [1655814152.716988][3723:3726] CHIP:CTL: Commissioning discovery over BLE failed: ../../third_party/connectedhomeip/src/platform/Linux/BLEManagerImpl.cpp:829: CHIP Error 0x00000032: Timeout |
| [1655814152.717099][3723:3726] CHIP:-: ../../third_party/connectedhomeip/src/platform/Linux/BLEManagerImpl.cpp:829: CHIP Error 0x00000032: Timeout at ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:270 |
| [1655814172.703455][3723:3728] CHIP:CTL: Discovery timed out |
| [1655814172.703550][3723:3728] CHIP:CTL: Stopping commissioning discovery over DNS-SD |
| [1655814172.703607][3723:3728] CHIP:TOO: Secure Pairing Failed |
| disabled: true |
| |
| - label: |
| "Passcode: Using the manual code from Step 1, generate a new manual |
| code using all the same Onboarding Payload components except for the |
| Passcode. For each Passcode in the following list, set the Passcode |
| component to one of the invalid Passcode and generate a new manual |
| code using all the same Onboarding Payload components and one Passcode |
| from the list: 00000000, 11111111, 22222222, 33333333, 44444444, |
| 55555555, 66666666, 77777777, 88888888, 99999999, 12345678, 87654321" |
| verification: | |
| 1. Use this as an example of how to generate a manual code with an invalid passcode. In this example the invalid passcode=00000000 |
| |
| Use chip-tool"s "payload generate-manualcode" command to help generate the new, invalid Manual code |
| |
| Verify in DUT as client side |
| $ ./chip-tool payload generate-manualcode --existing-payload 749701123365521327694 --allow-invalid-payload 1 --setup-pin-code 00000000 |
| [1657239062245] [32164:16876812] CHIP: [TOO] Manual Code: 749152000065521327698 |
| disabled: true |
| |
| - label: |
| "Provide each of the Manual Pairing Codes, generated in the previous |
| step, to the DUT in any format supported by the DUT" |
| verification: | |
| Verify in DUT as client side |
| |
| (00000000) |
| $ ./chip-tool pairing code 1 749152000065521327698 |
| [1651187937232] [13896:372977] CHIP: [TOO] Run command failure: ../../examples/chip-tool/third_party/connectedhomeip/src/setup_payload/ManualSetupPayloadParser.cpp:161: CHIP Error 0x0000002F: Invalid argument |
| |
| (11111111) |
| $ ./chip-tool pairing code 1 751911067865521327698 |
| [1655814240.531424][3747:3747] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (22222222) |
| $ ./chip-tool pairing code 1 754670135665521327694 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (33333333) |
| $ ./chip-tool pairing code 1 757429203465521327699 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (44444444) |
| $ ./chip-tool pairing code 1 760188271265521327697 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (55555555) |
| $ ./chip-tool pairing code 1 762947339065521327695 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (66666666) |
| $ ./chip-tool pairing code 1 749322406965521327695 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (77777777) |
| $ ./chip-tool pairing code 1 752081474765521327697 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (88888888) |
| $ ./chip-tool pairing code 1 754840542565521327693 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (99999999) |
| $ ./chip-tool pairing code 1 757599610365521327695 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (12345678) |
| $ ./chip-tool pairing code 1 757678075365521327695 |
| [1655814269.264731][3754:3754] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| (87654321) |
| $ ./chip-tool pairing code 1 765457534965521327696 |
| [1655814323.718122][3761:3761] CHIP:TOO: Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| disabled: true |
| |
| - label: |
| "VENDOR_ID: Using the manual code from Step 1, generate a new manual |
| code using all the same Onboarding Payload components except for the |
| VENDOR_ID. For each VENDOR_ID in the following list, set the VENDOR_ID |
| component to one of the invalid Test VENDOR_IDs and generate a new |
| manual code using all the same Onboarding Payload components and one |
| Test VENDOR_ID from the list: 0xFFF1, 0xFFF2, 0xFFF3, 0xFFF4" |
| verification: | |
| 1. Use this as an example of how to generate a manual code with an invalid vendor IDs |
| |
| Verify in DUT as client side |
| $ ./chip-tool payload generate-manualcode --discriminator 3840 --setup-pin-code 20202021 --version 0 --vendor-id 0xFFF1 --product-id 0x8001 --commissioning-mode 1 |
| [1651189120686] [14218:398626] CHIP: [TOO] Manual Code: 749701123365521327694 |
| disabled: true |
| |
| - label: |
| "Provide each of the Manual Pairing Codes, generated in the previous |
| step, to the DUT in any format supported by the DUT" |
| verification: | |
| 1. Run each of the following DUT commands below containing invalid Vendor IDs. |
| 2. Verify that the TH commissionee=all-cluserters-app does not get commissioned -or- the DUT make the user fully aware of the security risks of providing an uncertified device with operational and networking credentials |
| |
| (0xFFF1) |
| $ ./chip-tool pairing code 1 749701123365521327694 |
| |
| (0xFFF2) |
| $ ./chip-tool pairing code 1 749701123365522327692 |
| |
| |
| (0xFFF3) |
| $ ./chip-tool pairing code 1 749701123365523327697 |
| |
| |
| (0xFFF4) |
| $ ./chip-tool pairing code 1 749701123365524327693 |
| disabled: true |
| |
| - label: |
| "PRODUCT_ID: Using the manual code from Step 1, generate a new manual |
| code but substituting out the current PRODUCT_ID with an invalid |
| PRODUCT_ID of 0x0000(i.e. While following section 2.5.3. Product |
| Identifier)" |
| verification: | |
| 1. Use chip-tool"s "payload generate-manualcode" command to help generate the new, invalid Manual code |
| |
| Verify in DUT as client side |
| $ ./chip-tool payload generate-manualcode --existing-payload 749701123365521327694 --allow-invalid-payload 1 --product-id 0x0000 |
| [1657239418656] [32180:16880488] CHIP: [TOO] Manual Code: 749701123365521000006 |
| disabled: true |
| |
| - label: |
| "Provide the Manual Pairing Code, generated in the previous step, to |
| the DUT in any format supported by the DUT" |
| verification: | |
| Verify in DUT as client side |
| $ ./chip-tool pairing code 1 749701123365521000006 |
| |
| [1657239565895] [32193:16881922] CHIP: [TOO] Run command failure: ../../examples/chip-tool/third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:55: CHIP Error 0x0000002F: Invalid argument |
| disabled: true |
| |
| - label: |
| "Check Digit: Using the manual code from Step 1, generate a new manual |
| code but substituting out the current CHECK_DIGIT with an invalid |
| CHECK_DIGIT (i.e. Any different CHECK_DIGIT than the commissionees |
| CHECK_DIGIT while following Table 39. Encoding Method with Vendor and |
| Product IDs included (VID_PID_Present == 1))" |
| verification: | |
| 1. Use chip-tool"s "payload verhoeff-verify" command to help verify that the check-digit is invalid |
| |
| $ ./chip-tool payload verhoeff-verify 749701123365521327693 20 |
| |
| Verify in DUT as client side |
| [1651187504088] [13629:367627] CHIP: [SPL] Verifying Manual Code: 74970112336552132769 |
| [1651187504088] [13629:367627] CHIP: [SPL] 749701123365521327693 is INVALID at position 20 |
| disabled: true |
| |
| - label: |
| "Provide the Manual Pairing Code, generated in the previous step, to |
| the DUT in any format supported by the DUT" |
| verification: | |
| $ ./chip-tool pairing code 1 749701123365521327693 |
| |
| Verify in DUT as client side |
| [1651187528666] [13631:367920] CHIP: [TOO] Run command failure: ../../examples/chip-tool/third_party/connectedhomeip/src/setup_payload/ManualSetupPayloadParser.cpp:50: CHIP Error 0x00000013: Integrity check failed |
| disabled: true |
