| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 62.2.2. [TC-PS-2.2] Event reporting with server as DUT |
| |
| PICS: |
| - PS.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Commission DUT to TH" |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: "Bring the DUT into a state without any wired faults." |
| PICS: PS.S.A000a |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: "TH reads the ActiveWiredFaults attribute from the DUT" |
| verification: | |
| Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE |
| |
| ./chip-tool powersource read active-wired-faults 1 1 |
| |
| Verify on TH logs: |
| General error: 0x86 (UNSUPPORTED_ATTRIBUTE) |
| disabled: true |
| |
| - label: "Set up subscription to WiredFaultChange event" |
| PICS: PS.S.E00 && PS.M.ManualWiredFault |
| verification: | |
| ./chip-tool interactive start |
| |
| powersource subscribe-event-by-id 120 3600 1 1 |
| |
| Verify on the TH Log: |
| |
| [1651671151.484803][6266:6266] CHIP:DMG: SubscribeRequestMessage = |
| [1651671151.484857][6266:6266] CHIP:DMG: { |
| [1651671151.484907][6266:6266] CHIP:DMG: KeepSubscriptions = false, |
| [1651671151.484968][6266:6266] CHIP:DMG: MinIntervalFloorSeconds = 0x78, |
| [1651671151.485025][6266:6266] CHIP:DMG: MaxIntervalCeilingSeconds = 0xe10, |
| [1651671151.485069][6266:6266] CHIP:DMG: EventPathIBs = |
| [1651671151.485134][6266:6266] CHIP:DMG: [ |
| [1651671151.485185][6266:6266] CHIP:DMG: EventPath = |
| [1651671151.485246][6266:6266] CHIP:DMG: { |
| [1651671151.485303][6266:6266] CHIP:DMG: Endpoint = 0x1, |
| [1651671151.485368][6266:6266] CHIP:DMG: Cluster = 0x2f, |
| [1651671151.485439][6266:6266] CHIP:DMG: Event = 0x0, |
| [1651671151.485510][6266:6266] CHIP:DMG: }, |
| [1651671151.485570][6266:6266] CHIP:DMG: |
| [1651671151.485620][6266:6266] CHIP:DMG: ], |
| [1651671151.485679][6266:6266] CHIP:DMG: |
| [1651671151.485731][6266:6266] CHIP:DMG: isFabricFiltered = true, |
| [1651671151.485784][6266:6266] CHIP:DMG: InteractionModelRevision = 1 |
| [1651671151.485827][6266:6266] CHIP:DMG: }, |
| [1651671151.485956][6266:6266] CHIP:DMG: Final negotiated min/max parameters: Min = 120s, Max = 3600s |
| disabled: true |
| |
| - label: "Bring the DUT into a wired fault state." |
| verification: | |
| DUT ACTION REQUIRED |
| disabled: true |
| |
| - label: "TH reads the ActiveWiredFaults attribute from the DUT" |
| PICS: PS.S.A000a && PS.M.ManualWiredFault |
| verification: | |
| Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE |
| |
| ./chip-tool powersource read active-wired-faults 1 1 |
| |
| Verify on the TH Log: |
| |
| General error: 0x86 (UNSUPPORTED_ATTRIBUTE) |
| disabled: true |
| |
| - label: "Bring the DUT back into a clean state." |
| PICS: PS.S.E00 && PS.M.ManualWiredFault |
| verification: | |
| DUT ACTION REQUIRED |
| disabled: true |
| |
| - label: "Bring the DUT into a state without any battery faults." |
| PICS: PS.S.A0012 |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: "TH reads the ActiveBatFaults attribute from the DUT" |
| verification: | |
| Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE |
| |
| ./chip-tool powersource read active-battery-faults 12345 1 |
| |
| Verify on the TH Log: |
| |
| General error: 0x86 (UNSUPPORTED_ATTRIBUTE) |
| disabled: true |
| |
| - label: "Set up subscription to BatFaultChange event" |
| PICS: PS.S.E01 && PS.M.ManualBatFault |
| verification: | |
| ./chip-tool interactive start |
| powersource subscribe-event-by-id 0 100 1 1 |
| |
| |
| Verify on the TH Log: |
| SubscribeRequestMessage = |
| [1651667556.522349][6266:6266] CHIP:DMG: { |
| [1651667556.522399][6266:6266] CHIP:DMG: KeepSubscriptions = false, |
| [1651667556.522454][6266:6266] CHIP:DMG: MinIntervalFloorSeconds = 0x0, |
| [1651667556.522512][6266:6266] CHIP:DMG: MaxIntervalCeilingSeconds = 0x64, |
| [1651667556.522564][6266:6266] CHIP:DMG: EventPathIBs = |
| [1651667556.522619][6266:6266] CHIP:DMG: [ |
| [1651667556.522670][6266:6266] CHIP:DMG: EventPath = |
| [1651667556.522730][6266:6266] CHIP:DMG: { |
| [1651667556.522789][6266:6266] CHIP:DMG: Endpoint = 0x1, |
| [1651667556.522897][6266:6266] CHIP:DMG: Cluster = 0x2f, |
| [1651667556.522965][6266:6266] CHIP:DMG: Event = 0x1, |
| [1651667556.523026][6266:6266] CHIP:DMG: }, |
| [1651667556.523090][6266:6266] CHIP:DMG: |
| [1651667556.523140][6266:6266] CHIP:DMG: ], |
| [1651667556.523199][6266:6266] CHIP:DMG: |
| [1651667556.523243][6266:6266] CHIP:DMG: isFabricFiltered = true, |
| [1651667556.523296][6266:6266] CHIP:DMG: InteractionModelRevision = 1 |
| [1651667556.523344][6266:6266] CHIP:DMG: }, |
| [1651667556.523471][6266:6266] CHIP:DMG: Final negotiated min/max parameters: Min = 0s, Max = 100s |
| disabled: true |
| |
| - label: "Bring the DUT into a battery fault state." |
| verification: | |
| DUT ACTION REQUIRED |
| disabled: true |
| |
| - label: "TH reads the ActiveBatFaults attribute from the DUT" |
| PICS: PS.S.A0012 && PS.M.ManualBatFault |
| verification: | |
| Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE |
| |
| ./chip-tool powersource read active-battery-faults 1 1 |
| |
| Verify on the TH Log: |
| General error: 0x86 (UNSUPPORTED_ATTRIBUTE) |
| disabled: true |
| |
| - label: "Bring the DUT back into a clean state." |
| PICS: PS.S.E01 && PS.M.ManualWiredFault |
| verification: | |
| DUT ACTION REQUIRED |
| disabled: true |
| |
| - label: "Bring the DUT into a state without any charge faults." |
| PICS: PS.S.A001e |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: "TH reads the ActiveBatChargeFaults attribute from the DUT" |
| verification: | |
| Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE |
| |
| ./chip-tool powersource read active-battery-charge-faults 1 1 |
| |
| Verify on the TH Log: |
| General error: 0x86 (UNSUPPORTED_ATTRIBUTE) |
| disabled: true |
| |
| - label: "Set up subscription to BatChargeFaultChange event" |
| PICS: PS.S.E02 && PS.M.ManualBatChargeFault |
| verification: | |
| ./chip-tool interactive start |
| |
| powersource subscribe-event-by-id 1 100 1000 1 1 |
| |
| Verify on the TH Log: |
| [1651671068.817350][6266:6266] CHIP:IM: Received Subscribe request |
| [1651671068.817489][6266:6266] CHIP:DMG: SubscribeRequestMessage = |
| [1651671068.817529][6266:6266] CHIP:DMG: { |
| [1651671068.817553][6266:6266] CHIP:DMG: KeepSubscriptions = false, |
| [1651671068.817612][6266:6266] CHIP:DMG: MinIntervalFloorSeconds = 0x0, |
| [1651671068.817672][6266:6266] CHIP:DMG: MaxIntervalCeilingSeconds = 0x64, |
| [1651671068.817707][6266:6266] CHIP:DMG: EventPathIBs = |
| [1651671068.817734][6266:6266] CHIP:DMG: [ |
| [1651671068.817769][6266:6266] CHIP:DMG: EventPath = |
| [1651671068.817830][6266:6266] CHIP:DMG: { |
| [1651671068.817883][6266:6266] CHIP:DMG: Endpoint = 0x1, |
| [1651671068.817923][6266:6266] CHIP:DMG: Cluster = 0x2f, |
| [1651671068.817985][6266:6266] CHIP:DMG: Event = 0x2, |
| [1651671068.818013][6266:6266] CHIP:DMG: }, |
| [1651671068.818074][6266:6266] CHIP:DMG: |
| [1651671068.818129][6266:6266] CHIP:DMG: ], |
| [1651671068.818159][6266:6266] CHIP:DMG: |
| [1651671068.818228][6266:6266] CHIP:DMG: isFabricFiltered = true, |
| [1651671068.818310][6266:6266] CHIP:DMG: InteractionModelRevision = 1 |
| [1651671068.818336][6266:6266] CHIP:DMG: }, |
| [1651671068.818414][6266:6266] CHIP:DMG: Final negotiated min/max parameters: Min = 0s, Max = 100s |
| disabled: true |
| |
| - label: "Bring the DUT into a charge fault state." |
| verification: | |
| DUT ACTION REQUIRED |
| disabled: true |
| |
| - label: "TH reads the ActiveBatChargeFaults attribute from the DUT" |
| PICS: PS.S.A001e && PS.M.ManualBatChargeFault |
| verification: | |
| Optional Attribute - If it is supported, then in TH log it will results in displaying the value, else it will display UNSUPPORTED_ATTRIBUTE |
| |
| ./chip-tool powersource read active-battery-charge-faults 1 1 |
| |
| Verify on the TH Log: |
| General error: 0x86 (UNSUPPORTED_ATTRIBUTE) |
| disabled: true |
| |
| - label: "Bring the DUT back into a clean state." |
| PICS: PS.S.E02 && PS.M.ManualBatChargeFault |
| verification: | |
| DUT ACTION REQUIRED |
| disabled: true |
