| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 3.3.1.[TC-SU-2.3]Transfer of Software Update images between DUT and TH/OTA-P |
| |
| PICS: |
| - MCORE.OTA.Requestor |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: |
| "DUT sends a QueryImage command to the TH/OTA-P. RequestorCanConsent |
| is set to True by DUT. OTA-P/TH responds with a QueryImageResponse |
| with UserConsentNeeded field set to True." |
| PICS: MCORE.OTA.RequestorConsent |
| verification: | |
| Run the OTA Provider App using the command: |
| |
| ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -c |
| |
| ./chip-tool otasoftwareupdaterequestor announce-ota-provider 0xDEADBEEF 0 0 0 0x1234567890 0 |
| |
| where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID |
| |
| Verify that the DUT obtains user consent before transferring the image. This step is vendor specific. |
| disabled: true |
| |
| - label: |
| "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a |
| QueryImageResponse back to DUT. QueryStatus is set to UpdateAvailable. |
| Set ImageURI to the location where the image is located." |
| verification: | |
| "Run the OTA Provider App using the command: |
| |
| ./chip-ota-provider-app --discriminator ${PROVIDER_LONG_DISCRIMINATOR} --secured-device-port ${PROVIDER_UDP_PORT} --KVS ${KVS_STORE_LOCATION} --filepath ${SW_IMAGE_FILE} -q updateAvailable |
| |
| ./chip-tool otasoftwareupdaterequestor announce-ota-provider 0xDEADBEEF 0 0 0 0x1234567890 0 |
| |
| where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID |
| |
| Verify that the transfer of the software image happens all the way until the last Block is acknowledged on the OTA Provider logs: |
| |
| [1645748688025] [99779:20370762] CHIP: [BDX] OutputEvent type: AckEOFReceived |
| [1645748688025] [99779:20370762] CHIP: [BDX] Transfer completed, got AckEOF" |
| disabled: true |
| |
| - label: |
| "DUT sends a QueryImage command to the TH/OTA-P. TH/OTA-P sends a |
| QueryImageResponse back to DUT. QueryStatus is set to UpdateAvailable. |
| Set ImageURI with the https url of the software image." |
| PICS: MCORE.OTA.HTTPS |
| verification: | |
| Out of scope for V1.0 |
| disabled: true |
| |
| - label: |
| "During the transfer of the image to the DUT, force fail the transfer |
| before it completely transfers the image. Wait for the Idle timeout so |
| that reading the UpdateState Attribute of the OTA Requestor returns |
| the value as Idle. Initiate another QueryImage Command from DUT to the |
| TH/OTA-P." |
| verification: | |
| ./chip-tool otasoftwareupdaterequestor announce-ota-provider 0xDEADBEEF 0 0 0 0x1234567890 0 |
| |
| where 0x1234567890 is OTA Requestor node ID and 0xDEADBEEF is OTA Provider node ID |
| |
| Kill the OTA Provider App during the transfer of the image to the DUT before it completely transfers the image. |
| |
| Wait for atleast 5 minutes or more until reading the UpdateState Attribute of the OTA Requestor returns the value as Idle (Value 1) |
| chip-tool otasoftwareupdaterequestor read update-state 0x1234567890 0 |
| |
| [1651259701990] [18726:35135506] CHIP: [DMG] ReportDataMessage = |
| [1651259701990] [18726:35135506] CHIP: [DMG] { |
| [1651259701990] [18726:35135506] CHIP: [DMG] AttributeReportIBs = |
| [1651259701990] [18726:35135506] CHIP: [DMG] [ |
| [1651259701990] [18726:35135506] CHIP: [DMG] AttributeReportIB = |
| [1651259701990] [18726:35135506] CHIP: [DMG] { |
| [1651259701990] [18726:35135506] CHIP: [DMG] AttributeDataIB = |
| [1651259701990] [18726:35135506] CHIP: [DMG] { |
| [1651259701990] [18726:35135506] CHIP: [DMG] DataVersion = 0xa8a08a2a, |
| [1651259701990] [18726:35135506] CHIP: [DMG] AttributePathIB = |
| [1651259701990] [18726:35135506] CHIP: [DMG] { |
| [1651259701990] [18726:35135506] CHIP: [DMG] Endpoint = 0x0, |
| [1651259701990] [18726:35135506] CHIP: [DMG] Cluster = 0x2a, |
| [1651259701990] [18726:35135506] CHIP: [DMG] Attribute = 0x0000_0002, |
| [1651259701990] [18726:35135506] CHIP: [DMG] } |
| [1651259701990] [18726:35135506] CHIP: [DMG] |
| [1651259701990] [18726:35135506] CHIP: [DMG] Data = 1, |
| [1651259701990] [18726:35135506] CHIP: [DMG] }, |
| [1651259701990] [18726:35135506] CHIP: [DMG] |
| [1651259701990] [18726:35135506] CHIP: [DMG] }, |
| [1651259701990] [18726:35135506] CHIP: [DMG] |
| [1651259701990] [18726:35135506] CHIP: [DMG] ], |
| [1651259701990] [18726:35135506] CHIP: [DMG] |
| [1651259701990] [18726:35135506] CHIP: [DMG] SuppressResponse = true, |
| [1651259701990] [18726:35135506] CHIP: [DMG] InteractionModelRevision = 1 |
| [1651259701990] [18726:35135506] CHIP: [DMG] } |
| [1653645452.044092][15281:15286] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_002A Attribute 0x0000_0002 DataVersion: 1306504521 |
| [1653645452.044186][15281:15286] CHIP:TOO: UpdateState: 1 |
| |
| |
| Relaunch the OTA Provider App and initiate another query |
| chip-tool otasoftwareupdaterequestor announce-ota-provider 0xDEADBEEF 0 0 0 0x1234567890 0 |
| |
| Verify that the DUT starts a new transfer of software image when sending another QueryImage request i.e. Start Offset field in ReceiveInit message received on OTA Provider side is 0 |
| |
| [1651260350133] [18661:35147439] CHIP: [ATM] ReceiveInit |
| [1651260350133] [18661:35147439] CHIP: [ATM] Proposed Transfer Control: 0x20 |
| [1651260350133] [18661:35147439] CHIP: [ATM] Range Control: 0x0 |
| [1651260350133] [18661:35147439] CHIP: [ATM] Proposed Max Block Size: 1024 |
| [1651260350133] [18661:35147439] CHIP: [ATM] Start Offset: 0x0000000000000000 |
| [1651260350133] [18661:35147439] CHIP: [ATM] Proposed Max Length: 0x0000000000000000 |
| [1651260350133] [18661:35147439] CHIP: [ATM] File Designator Length: 8 |
| [1651260350133] [18661:35147439] CHIP: [ATM] File Designator: test.ota |
| disabled: true |
| |
| - label: |
| "During the transfer of the image to the DUT, force fail the transfer |
| before it completely transfers the image. Initiate another QueryImage |
| Command from DUT to the TH/OTA-P. Set the RC[STARTOFS] bit and |
| associated STARTOFS field in the ReceiveInit Message to indicate the |
| resumption of a transfer previously aborted." |
| PICS: MCORE.OTA.Resume |
| verification: | |
| Out of scope for V1.0 |
| disabled: true |
| |
| - label: "Perform the OTA Update on DUT using vendor specific mechanism." |
| PICS: MCORE.OTA.VendorSpecific |
| verification: | |
| Use vendor specific steps to initiate OTA Update and verify that the software image is transferred to the DUT |
| disabled: true |
