| # Copyright (c) 2022 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: General Commissioning cluster basic tests |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "General Commissioning" |
| endpoint: 0 |
| discriminator: |
| type: int16u |
| defaultValue: 3840 |
| payload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00KA0648G00" # This value needs to be generated automatically |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Write Breadcrumb (1/2)" |
| command: "writeAttribute" |
| attribute: "Breadcrumb" |
| arguments: |
| value: 137438953472 |
| |
| - label: "Read back Breadcrumb (1/2)" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 137438953472 |
| |
| - label: "Write Breadcrumb (2/2)" |
| command: "writeAttribute" |
| attribute: "Breadcrumb" |
| arguments: |
| value: 81 |
| |
| - label: "Read back Breadcrumb (2/2)" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 81 |
| |
| - label: "Reboot to reset Breadcrumb" |
| cluster: "SystemCommands" |
| command: "Reboot" |
| |
| - label: "Connect to the device again" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Read back Breadcrumb after reboot and ensure it was not persisted" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 0 |
| |
| - label: "Set Breadcrumb to nonzero value" |
| command: "writeAttribute" |
| attribute: "Breadcrumb" |
| arguments: |
| value: 1 |
| |
| - label: "Check Breadcrumb set worked" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 1 |
| |
| - label: "Send CommissioningComplete without armed fail-safe" |
| command: "CommissioningComplete" |
| response: |
| values: |
| - name: ErrorCode |
| value: 3 # NoFailSafe |
| |
| - label: "Check Breadcrumb was not touched by invalid CommissioningComplete" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 1 |
| |
| - label: "Open Commissioning Window from alpha" |
| cluster: "Administrator Commissioning" |
| command: "OpenBasicCommissioningWindow" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 180 |
| |
| # Arming a fail-safe over CASE while a commissioning window is open should not work. |
| - label: "Try to arm fail-safe" |
| command: "ArmFailSafe" |
| arguments: |
| values: |
| - name: ExpiryLengthSeconds |
| value: 10 |
| - name: Breadcrumb |
| value: 5000 |
| response: |
| values: |
| - name: ErrorCode |
| value: 4 # BusyWithOtherAdmin |
| |
| - label: |
| "Check Breadcrumb was not touched by ArmFailSafe with commissioning |
| window open" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 1 |
| |
| - label: "Reset Breadcrumb to 0 so we can commission" |
| command: "writeAttribute" |
| attribute: "Breadcrumb" |
| arguments: |
| value: 0 |
| |
| - label: "Commission from beta" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: 0x12345 |
| - name: "payload" |
| value: payload |
| |
| - label: "Wait for the commissioned device to be retrieved for beta" |
| identity: "beta" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: 0x12345 |
| |
| - label: "Arm fail-safe" |
| command: "ArmFailSafe" |
| arguments: |
| values: |
| - name: ExpiryLengthSeconds |
| value: 500 |
| - name: Breadcrumb |
| value: 2 |
| response: |
| values: |
| - name: ErrorCode |
| value: 0 # OK |
| |
| - label: "Check Breadcrumb was properly set by ArmFailSafe" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 2 |
| |
| - label: "Try to arm fail-safe from wrong fabric" |
| command: "ArmFailSafe" |
| identity: "beta" |
| arguments: |
| values: |
| - name: ExpiryLengthSeconds |
| value: 10 |
| - name: Breadcrumb |
| value: 5000 |
| response: |
| values: |
| - name: ErrorCode |
| value: 4 # BusyWithOtherAdmin |
| |
| - label: |
| "Check Breadcrumb was not touched by ArmFailSafe with existing |
| fail-safe armed" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 2 |
| |
| - label: "Send CommissioningComplete from wrong fabric" |
| command: "CommissioningComplete" |
| identity: "beta" |
| response: |
| values: |
| - name: ErrorCode |
| value: 2 # InvalidAuthentication |
| |
| - label: |
| "Check Breadcrumb was not touched by CommissioningComplete from wrong |
| fabric" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 2 |
| |
| - label: "Close out the fail-safe gracefully" |
| command: "CommissioningComplete" |
| response: |
| values: |
| - name: ErrorCode |
| value: 0 # Ok |
| |
| - label: "Check Breadcrumb was reset to 0 by CommissioningComplete" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 0 |
| |
| - label: "Arm fail-safe again" |
| command: "ArmFailSafe" |
| arguments: |
| values: |
| - name: ExpiryLengthSeconds |
| value: 500 |
| - name: Breadcrumb |
| value: 3 |
| response: |
| values: |
| - name: ErrorCode |
| value: 0 # OK |
| |
| - label: "Check Breadcrumb was set by arming fail-safe again" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 3 |
| |
| - label: "Force-expire the fail-safe" |
| command: "ArmFailSafe" |
| arguments: |
| values: |
| - name: ExpiryLengthSeconds |
| value: 0 |
| - name: Breadcrumb |
| value: 4 |
| response: |
| values: |
| - name: ErrorCode |
| value: 0 # OK |
| |
| - label: "Check Breadcrumb was reset by expiring the fail-safe" |
| command: "readAttribute" |
| attribute: "Breadcrumb" |
| response: |
| value: 0 |
| |
| - label: "Validate presence of SupportsConcurrentConnection" |
| command: "readAttribute" |
| attribute: "SupportsConcurrentConnection" |
| response: |
| constraints: |
| type: boolean |
| |
| - label: "Read original regulatory location" |
| command: "readAttribute" |
| attribute: "RegulatoryConfig" |
| response: |
| saveAs: originalRegulatoryConfig |
| |
| - label: "Read original location" |
| command: "readAttribute" |
| cluster: "Basic Information" |
| attribute: "Location" |
| response: |
| value: "XX" |
| saveAs: originalLocation |
| |
| - label: "Try to SetRegulatoryConfig with 0-length country code" |
| command: "SetRegulatoryConfig" |
| arguments: |
| values: |
| - name: "NewRegulatoryConfig" |
| value: 0 |
| - name: "CountryCode" |
| value: "" |
| - name: "Breadcrumb" |
| value: 0 |
| response: |
| error: CONSTRAINT_ERROR |
| |
| - label: "Read back location" |
| command: "readAttribute" |
| cluster: "Basic Information" |
| attribute: "Location" |
| response: |
| value: originalLocation |
| |
| - label: "Try to SetRegulatoryConfig with length-1 country code" |
| command: "SetRegulatoryConfig" |
| arguments: |
| values: |
| - name: "NewRegulatoryConfig" |
| value: 0 |
| - name: "CountryCode" |
| value: "U" |
| - name: "Breadcrumb" |
| value: 0 |
| response: |
| error: CONSTRAINT_ERROR |
| |
| - label: "Read back location second time" |
| command: "readAttribute" |
| cluster: "Basic Information" |
| attribute: "Location" |
| response: |
| value: originalLocation |
| |
| - label: "Try to SetRegulatoryConfig with length-2 country code" |
| command: "SetRegulatoryConfig" |
| arguments: |
| values: |
| - name: "NewRegulatoryConfig" |
| value: 0 |
| - name: "CountryCode" |
| value: "US" |
| - name: "Breadcrumb" |
| value: 0 |
| response: |
| values: |
| - name: "ErrorCode" |
| value: 0 |
| - name: "DebugText" |
| value: "" |
| |
| - label: "Read back location third time" |
| command: "readAttribute" |
| cluster: "Basic Information" |
| attribute: "Location" |
| response: |
| value: "US" |
| |
| - label: "Restore initial values" |
| command: "SetRegulatoryConfig" |
| arguments: |
| values: |
| - name: "NewRegulatoryConfig" |
| value: originalRegulatoryConfig |
| - name: "CountryCode" |
| value: originalLocation |
| - name: "Breadcrumb" |
| value: 0 |