| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 28.2.1. [TC-BDX-2.1] Synchronous file sending |
| |
| PICS: |
| - MCORE.BDX.SynchronousSender |
| |
| config: |
| nodeId: "0x12344321" |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Preconditions" |
| verification: | |
| This test can be verified using TC-SU-3.3 from the OTA Software Update section. Pls refer to OTA section for steps. |
| This test can also be verified with TH sending a ReceiveInit message to the DUT. |
| disabled: true |
| |
| - label: |
| "Step 1: DUT sends the first Block message to TH + TH sends a BlockAck |
| message back to DUT." |
| verification: | |
| On OTA Reference Requester App logs, Verify that the Block message has the following mandatory fields |
| - Block Counter - Must start at 0 at the start of the transfer. |
| - Data - The length must be in the range [0 < Length ⇐ Max Block Size], where Max Block Size is the negotiated Max Block Size matching the SendAccept message that initiated the transfer. |
| |
| [1636410923701] [59208:62970584] CHIP: [ATM] Handling received BDX Message |
| [1636410923701] [59208:62970584] CHIP: [ATM] Block |
| [1636410923701] [59208:62970584] CHIP: [ATM] Block Counter: 0 |
| [1636410923701] [59208:62970584] CHIP: [ATM] Data Length: 1024 |
| |
| Compare with |
| |
| [1636410922200] [59208:62970584] CHIP: [ATM] Handling received BDX Message |
| [1636410922200] [59208:62970584] CHIP: [ATM] ReceiveAccept |
| [1636410922200] [59208:62970584] CHIP: [ATM] Transfer Control: 0x20 |
| [1636410922200] [59208:62970584] CHIP: [ATM] Range Control: 0x0 |
| [1636410922200] [59208:62970584] CHIP: [ATM] Max Block Size: 1024 |
| [1636410922200] [59208:62970584] CHIP: [ATM] Length: 0x0000000000000000 |
| disabled: true |
| |
| - label: |
| "Step 2: DUT sends further Block messages to TH + TH sends BlockAck |
| messages back to DUT." |
| verification: | |
| On OTA Reference Requester App logs, Verify that the Blocks are sent in ascending and sequential block counter order. |
| |
| [1636410925203] [59208:62970585] CHIP: [ATM] Block |
| [1636410925203] [59208:62970585] CHIP: [ATM] Block Counter: 1 |
| |
| [1636410926704] [59208:62970584] CHIP: [ATM] Block |
| [1636410926704] [59208:62970584] CHIP: [ATM] Block Counter: 2 |
| |
| and so on |
| disabled: true |
| |
| - label: |
| "Step 3: DUT sends a BlockEOF message to TH + TH sends a BlockAckEOF |
| message back to DUT." |
| verification: | |
| On OTA Reference Requester App logs, Verify that the BlockEOF message has the following mandatory fields. |
| - Block Counter. |
| - Data - The length must be in the range [0 ⇐ Length ⇐ Max Block Size], where Max Block Size is the negotiated Max Block Size matching the SendAccept message that initiated the transfer. |
| - Verify that the pre-negotiated file size was transferred, if a definite size had been given. |
| |
| |
| [1636410935710] [59208:62970585] CHIP: [ATM] Handling received BDX Message |
| [1636410935710] [59208:62970585] CHIP: [ATM] BlockEOF |
| [1636410935710] [59208:62970585] CHIP: [ATM] Block Counter: 8 |
| [1636410935710] [59208:62970585] CHIP: [ATM] Data Length: 147 |
| |
| Compare with |
| |
| [1636410922200] [59208:62970584] CHIP: [ATM] Handling received BDX Message |
| [1636410922200] [59208:62970584] CHIP: [ATM] ReceiveAccept |
| [1636410922200] [59208:62970584] CHIP: [ATM] Transfer Control: 0x20 |
| [1636410922200] [59208:62970584] CHIP: [ATM] Range Control: 0x0 |
| [1636410922200] [59208:62970584] CHIP: [ATM] Max Block Size: 1024 |
| [1636410922200] [59208:62970584] CHIP: [ATM] Length: 0x0000000000000000 |
| disabled: true |