data_model/1.7/clusters/WindowCovering.xml

<?xml version="1.0"?>
<!--
Copyright (C) Connectivity Standards Alliance (2026). All rights reserved.
The information within this document is the property of the Connectivity
Standards Alliance and its use and disclosure are restricted, except as
expressly set forth herein.

Connectivity Standards Alliance hereby grants you a fully-paid, non-exclusive,
nontransferable, worldwide, limited and revocable license (without the right to
sublicense), under Connectivity Standards Alliance's applicable copyright
rights, to view, download, save, reproduce and use the document solely for your
own internal purposes and in accordance with the terms of the license set forth
herein. This license does not authorize you to, and you expressly warrant that
you shall not: (a) permit others (outside your organization) to use this
document; (b) post or publish this document; (c) modify, adapt, translate, or
otherwise change this document in any manner or create any derivative work
based on this document; (d) remove or modify any notice or label on this
document, including this Copyright Notice, License and Disclaimer. The
Connectivity Standards Alliance does not grant you any license hereunder other
than as expressly stated herein.

Elements of this document may be subject to third party intellectual property
rights, including without limitation, patent, copyright or trademark rights,
and any such third party may or may not be a member of the Connectivity
Standards Alliance. Connectivity Standards Alliance members grant other
Connectivity Standards Alliance members certain intellectual property rights as
set forth in the Connectivity Standards Alliance IPR Policy. Connectivity
Standards Alliance members do not grant you any rights under this license. The
Connectivity Standards Alliance is not responsible for, and shall not be held
responsible in any manner for, identifying or failing to identify any or all
such third party intellectual property rights. Please visit www.csa-iot.org for
more information on how to become a member of the Connectivity Standards
Alliance.

This document and the information contained herein are provided on an “AS IS”
basis and the Connectivity Standards Alliance DISCLAIMS ALL WARRANTIES EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO (A) ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OF THIRD PARTIES (INCLUDING
WITHOUT LIMITATION ANY INTELLECTUAL PROPERTY RIGHTS INCLUDING PATENT, COPYRIGHT
OR TRADEMARK RIGHTS); OR (B) ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, TITLE OR NONINFRINGEMENT. IN NO EVENT WILL THE
CONNECTIVITY STANDARDS ALLIANCE BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF
BUSINESS, LOSS OF USE OF DATA, INTERRUPTION OF BUSINESS, OR FOR ANY OTHER
DIRECT, INDIRECT, SPECIAL OR EXEMPLARY, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL
DAMAGES OF ANY KIND, IN CONTRACT OR IN TORT, IN CONNECTION WITH THIS DOCUMENT
OR THE INFORMATION CONTAINED HEREIN, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
LOSS OR DAMAGE.

All company, brand and product names in this document may be trademarks that
are the sole property of their respective owners.

This notice and disclaimer must be included on all copies of this document.

Connectivity Standards Alliance
508 Second Street, Suite 206
Davis, CA 95616, USA

:xrefstyle: basic
-->
<cluster xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="types types.xsd cluster cluster.xsd" id="0x0102" name="Window Covering Cluster" revision="8">
  <revisionHistory>
    <revision revision="1" summary="Mandatory global ClusterRevision attribute added; CCB 1994 1995 1996 1997 2086 2094 2095 2096 2097"/>
    <revision revision="2" summary="CCB 2328"/>
    <revision revision="3" summary="CCB 2477 2555 2845 3028"/>
    <revision revision="4" summary="All Hubs changes with FeatureMap &amp; OperationalStatus attribute"/>
    <revision revision="5" summary="New data model format and notation. Created plus clarified PositionAware and AbsolutePosition features. General cleanup of functionality."/>
    <revision revision="6" summary="Marked AbsolutePosition feature and associated elements provisional."/>
    <revision revision="7" summary="Removed AbsolutePosition feature and all associated elements from the cluster."/>
    <revision revision="8" summary="Removed P quality."/>
  </revisionHistory>
  <clusterIds>
    <clusterId id="0x0102" name="Window Covering"/>
  </clusterIds>
  <classification hierarchy="base" role="application" picsCode="WNCV" scope="Endpoint"/>
  <features>
    <feature bit="0" code="LF" name="Lift" summary="Lift control and behavior for lifting/sliding window coverings">
      <optionalConform choice="a" more="true" min="1"/>
    </feature>
    <feature bit="1" code="TL" name="Tilt" summary="Tilt control and behavior for tilting window coverings">
      <optionalConform choice="a" more="true" min="1"/>
    </feature>
    <feature bit="2" code="PA_LF" name="PositionAwareLift" summary="Position aware lift control is supported.">
      <optionalConform>
        <feature name="LF"/>
      </optionalConform>
    </feature>
    <feature bit="3" code="ABS" name="AbsolutePosition">
      <obsoleteConform/>
    </feature>
    <feature bit="4" code="PA_TL" name="PositionAwareTilt" summary="Position aware tilt control is supported.">
      <optionalConform>
        <feature name="TL"/>
      </optionalConform>
    </feature>
  </features>
  <dataTypes>
    <enum name="EndProductTypeEnum">
      <item value="0" name="RollerShade" summary="Simple Roller Shade">
        <mandatoryConform/>
      </item>
      <item value="1" name="RomanShade" summary="Roman Shade">
        <mandatoryConform/>
      </item>
      <item value="2" name="BalloonShade" summary="Balloon Shade">
        <mandatoryConform/>
      </item>
      <item value="3" name="WovenWood" summary="Woven Wood">
        <mandatoryConform/>
      </item>
      <item value="4" name="PleatedShade" summary="Pleated Shade">
        <mandatoryConform/>
      </item>
      <item value="5" name="CellularShade" summary="Cellular Shade">
        <mandatoryConform/>
      </item>
      <item value="6" name="LayeredShade" summary="Layered Shade">
        <mandatoryConform/>
      </item>
      <item value="7" name="LayeredShade2D" summary="Layered Shade 2D">
        <mandatoryConform/>
      </item>
      <item value="8" name="SheerShade" summary="Sheer Shade">
        <mandatoryConform/>
      </item>
      <item value="9" name="TiltOnlyInteriorBlind" summary="Tilt Only Interior Blind">
        <mandatoryConform/>
      </item>
      <item value="10" name="InteriorBlind" summary="Interior Blind">
        <mandatoryConform/>
      </item>
      <item value="11" name="VerticalBlindStripCurtain" summary="Vertical Blind, Strip Curtain">
        <mandatoryConform/>
      </item>
      <item value="12" name="InteriorVenetianBlind" summary="Interior Venetian Blind">
        <mandatoryConform/>
      </item>
      <item value="13" name="ExteriorVenetianBlind" summary="Exterior Venetian Blind">
        <mandatoryConform/>
      </item>
      <item value="14" name="LateralLeftCurtain" summary="Lateral Left Curtain">
        <mandatoryConform/>
      </item>
      <item value="15" name="LateralRightCurtain" summary="Lateral Right Curtain">
        <mandatoryConform/>
      </item>
      <item value="16" name="CentralCurtain" summary="Central Curtain">
        <mandatoryConform/>
      </item>
      <item value="17" name="RollerShutter" summary="Roller Shutter">
        <mandatoryConform/>
      </item>
      <item value="18" name="ExteriorVerticalScreen" summary="Exterior Vertical Screen">
        <mandatoryConform/>
      </item>
      <item value="19" name="AwningTerracePatio" summary="Awning Terrace (Patio)">
        <mandatoryConform/>
      </item>
      <item value="20" name="AwningVerticalScreen" summary="Awning Vertical Screen">
        <mandatoryConform/>
      </item>
      <item value="21" name="TiltOnlyPergola" summary="Tilt Only Pergola">
        <mandatoryConform/>
      </item>
      <item value="22" name="SwingingShutter" summary="Swinging Shutter">
        <mandatoryConform/>
      </item>
      <item value="23" name="SlidingShutter" summary="Sliding Shutter">
        <mandatoryConform/>
      </item>
      <item value="255" name="Unknown" summary="Unknown">
        <mandatoryConform/>
      </item>
    </enum>
    <enum name="TypeEnum">
      <item value="0" name="RollerShade" summary="RollerShade">
        <mandatoryConform/>
      </item>
      <item value="1" name="RollerShade2Motor" summary="RollerShade - 2 Motor">
        <mandatoryConform/>
      </item>
      <item value="2" name="RollerShadeExterior" summary="RollerShade - Exterior">
        <mandatoryConform/>
      </item>
      <item value="3" name="RollerShadeExterior2Motor" summary="RollerShade - Exterior - 2 Motor">
        <mandatoryConform/>
      </item>
      <item value="4" name="Drapery" summary="Drapery (curtain)">
        <mandatoryConform/>
      </item>
      <item value="5" name="Awning" summary="Awning">
        <mandatoryConform/>
      </item>
      <item value="6" name="Shutter" summary="Shutter">
        <mandatoryConform/>
      </item>
      <item value="7" name="TiltBlindTiltOnly" summary="Tilt Blind - Tilt Only">
        <mandatoryConform/>
      </item>
      <item value="8" name="TiltBlindLiftAndTilt" summary="Tilt Blind - Lift &amp; Tilt">
        <mandatoryConform/>
      </item>
      <item value="9" name="ProjectorScreen" summary="Projector Screen">
        <mandatoryConform/>
      </item>
      <item value="255" name="Unknown" summary="Unknown">
        <mandatoryConform/>
      </item>
    </enum>
    <bitmap name="ConfigStatusBitmap">
      <bitfield name="Operational" bit="0" summary="Device is operational.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="OnlineReserved" bit="1" summary="">
        <obsoleteConform/>
      </bitfield>
      <bitfield name="LiftMovementReversed" bit="2" summary="The lift movement is reversed.">
        <mandatoryConform>
          <feature name="LF"/>
        </mandatoryConform>
      </bitfield>
      <bitfield name="LiftPositionAware" bit="3" summary="Supports the PositionAwareLift feature (PA_LF).">
        <mandatoryConform>
          <feature name="PA_LF"/>
        </mandatoryConform>
      </bitfield>
      <bitfield name="TiltPositionAware" bit="4" summary="Supports the PositionAwareTilt feature (PA_TL).">
        <mandatoryConform>
          <feature name="PA_TL"/>
        </mandatoryConform>
      </bitfield>
      <bitfield name="LiftEncoderControlled" bit="5" summary="Uses an encoder for lift.">
        <mandatoryConform>
          <feature name="PA_LF"/>
        </mandatoryConform>
      </bitfield>
      <bitfield name="TiltEncoderControlled" bit="6" summary="Uses an encoder for tilt.">
        <mandatoryConform>
          <feature name="PA_TL"/>
        </mandatoryConform>
      </bitfield>
    </bitmap>
    <bitmap name="ModeBitmap">
      <bitfield name="MotorDirectionReversed" bit="0" summary="Reverse the lift direction.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="CalibrationMode" bit="1" summary="Perform a calibration.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="MaintenanceMode" bit="2" summary="Freeze all motions for maintenance.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="LedFeedback" bit="3" summary="Control the LEDs feedback.">
        <mandatoryConform/>
      </bitfield>
    </bitmap>
    <bitmap name="OperationalStatusBitmap">
      <bitfield name="Global" from="0x00" to="0x01" summary="Global operational state.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="Lift" from="0x02" to="0x03" summary="Lift operational state.">
        <mandatoryConform>
          <feature name="LF"/>
        </mandatoryConform>
      </bitfield>
      <bitfield name="Tilt" from="0x04" to="0x05" summary="Tilt operational state.">
        <mandatoryConform>
          <feature name="TL"/>
        </mandatoryConform>
      </bitfield>
    </bitmap>
    <bitmap name="SafetyStatusBitmap">
      <bitfield name="RemoteLockout" bit="0" summary="Movement commands are ignored (locked out). e.g. not granted authorization, outside some time/date range.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="TamperDetection" bit="1" summary="Tampering detected on sensors or any other safety equipment. Ex: a device has been forcedly moved without its actuator(s).">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="FailedCommunication" bit="2" summary="Communication failure to sensors or other safety equipment.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="PositionFailure" bit="3" summary="Device has failed to reach the desired position. e.g. with position aware device, time expired before TargetPosition is reached.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="ThermalProtection" bit="4" summary="Motor(s) and/or electric circuit thermal protection activated.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="ObstacleDetected" bit="5" summary="An obstacle is preventing actuator movement.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="Power" bit="6" summary="Device has power related issue or limitation e.g. device is running w/ the help of a backup battery or power might not be fully available at the moment.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="StopInput" bit="7" summary="Local safety sensor (not a direct obstacle) is preventing movements (e.g. Safety EU Standard EN60335).">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="MotorJammed" bit="8" summary="Mechanical problem related to the motor(s) detected.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="HardwareFailure" bit="9" summary="PCB, fuse and other electrics problems.">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="ManualOperation" bit="10" summary="Actuator is manually operated and is preventing actuator movement (e.g. actuator is disengaged/decoupled).">
        <mandatoryConform/>
      </bitfield>
      <bitfield name="Protection" bit="11" summary="Protection is activated.">
        <mandatoryConform/>
      </bitfield>
    </bitmap>
  </dataTypes>
  <attributes>
    <attribute id="0x0000" name="Type" type="TypeEnum" default="0">
      <access read="true" readPrivilege="view"/>
      <quality persistence="fixed"/>
      <mandatoryConform/>
      <constraint>
        <desc/>
      </constraint>
    </attribute>
    <attribute id="0x0001" name="PhysicalClosedLimitLift" type="uint16">
      <access read="true" readPrivilege="view"/>
      <quality persistence="fixed"/>
      <obsoleteConform/>
    </attribute>
    <attribute id="0x0002" name="PhysicalClosedLimitTilt" type="uint16">
      <access read="true" readPrivilege="view"/>
      <quality persistence="fixed"/>
      <obsoleteConform/>
    </attribute>
    <attribute id="0x0003" name="CurrentPositionLift" type="uint16">
      <access read="true" readPrivilege="view"/>
      <quality nullable="true" persistence="nonVolatile"/>
      <obsoleteConform/>
      <constraint>
        <between>
          <from>
            <attribute name="InstalledOpenLimitLift"/>
          </from>
          <to>
            <attribute name="InstalledClosedLimitLift"/>
          </to>
        </between>
      </constraint>
    </attribute>
    <attribute id="0x0004" name="CurrentPositionTilt" type="uint16">
      <access read="true" readPrivilege="view"/>
      <quality nullable="true" persistence="nonVolatile"/>
      <obsoleteConform/>
      <constraint>
        <between>
          <from>
            <attribute name="InstalledOpenLimitTilt"/>
          </from>
          <to>
            <attribute name="InstalledClosedLimitTilt"/>
          </to>
        </between>
      </constraint>
    </attribute>
    <attribute id="0x0005" name="NumberOfActuationsLift" type="uint16" default="0">
      <access read="true" readPrivilege="view"/>
      <quality persistence="nonVolatile"/>
      <optionalConform>
        <feature name="LF"/>
      </optionalConform>
    </attribute>
    <attribute id="0x0006" name="NumberOfActuationsTilt" type="uint16" default="0">
      <access read="true" readPrivilege="view"/>
      <quality persistence="nonVolatile"/>
      <optionalConform>
        <feature name="TL"/>
      </optionalConform>
    </attribute>
    <attribute id="0x0007" name="ConfigStatus" type="ConfigStatusBitmap" default="desc">
      <access read="true" readPrivilege="view"/>
      <quality persistence="nonVolatile"/>
      <mandatoryConform/>
      <constraint>
        <desc/>
      </constraint>
    </attribute>
    <attribute id="0x0008" name="CurrentPositionLiftPercentage" type="percent" default="null">
      <access read="true" readPrivilege="view"/>
      <quality nullable="true" persistence="nonVolatile"/>
      <optionalConform>
        <andTerm>
          <feature name="LF"/>
          <feature name="PA_LF"/>
        </andTerm>
      </optionalConform>
    </attribute>
    <attribute id="0x0009" name="CurrentPositionTiltPercentage" type="percent" default="null">
      <access read="true" readPrivilege="view"/>
      <quality nullable="true" persistence="nonVolatile"/>
      <optionalConform>
        <andTerm>
          <feature name="TL"/>
          <feature name="PA_TL"/>
        </andTerm>
      </optionalConform>
    </attribute>
    <attribute id="0x000A" name="OperationalStatus" type="OperationalStatusBitmap" default="0">
      <access read="true" readPrivilege="view"/>
      <mandatoryConform/>
      <constraint>
        <max value="63"/>
      </constraint>
    </attribute>
    <attribute id="0x000B" name="TargetPositionLiftPercent100ths" type="percent100ths" default="null">
      <access read="true" readPrivilege="view"/>
      <quality nullable="true"/>
      <mandatoryConform>
        <andTerm>
          <feature name="LF"/>
          <feature name="PA_LF"/>
        </andTerm>
      </mandatoryConform>
    </attribute>
    <attribute id="0x000C" name="TargetPositionTiltPercent100ths" type="percent100ths" default="null">
      <access read="true" readPrivilege="view"/>
      <quality nullable="true"/>
      <mandatoryConform>
        <andTerm>
          <feature name="TL"/>
          <feature name="PA_TL"/>
        </andTerm>
      </mandatoryConform>
    </attribute>
    <attribute id="0x000D" name="EndProductType" type="EndProductTypeEnum" default="0">
      <access read="true" readPrivilege="view"/>
      <quality persistence="fixed"/>
      <mandatoryConform/>
      <constraint>
        <desc/>
      </constraint>
    </attribute>
    <attribute id="0x000E" name="CurrentPositionLiftPercent100ths" type="percent100ths" default="null">
      <access read="true" readPrivilege="view"/>
      <quality nullable="true" persistence="nonVolatile"/>
      <mandatoryConform>
        <andTerm>
          <feature name="LF"/>
          <feature name="PA_LF"/>
        </andTerm>
      </mandatoryConform>
      <constraint>
        <max value="10000"/>
      </constraint>
    </attribute>
    <attribute id="0x000F" name="CurrentPositionTiltPercent100ths" type="percent100ths" default="null">
      <access read="true" readPrivilege="view"/>
      <quality nullable="true" persistence="nonVolatile"/>
      <mandatoryConform>
        <andTerm>
          <feature name="TL"/>
          <feature name="PA_TL"/>
        </andTerm>
      </mandatoryConform>
      <constraint>
        <max value="10000"/>
      </constraint>
    </attribute>
    <attribute id="0x0010" name="InstalledOpenLimitLift" type="uint16">
      <access read="true" readPrivilege="view"/>
      <quality persistence="nonVolatile"/>
      <obsoleteConform/>
      <constraint>
        <max value="65534"/>
      </constraint>
    </attribute>
    <attribute id="0x0011" name="InstalledClosedLimitLift" type="uint16">
      <access read="true" readPrivilege="view"/>
      <quality persistence="nonVolatile"/>
      <obsoleteConform/>
      <constraint>
        <max value="65534"/>
      </constraint>
    </attribute>
    <attribute id="0x0012" name="InstalledOpenLimitTilt" type="uint16">
      <access read="true" readPrivilege="view"/>
      <quality persistence="nonVolatile"/>
      <obsoleteConform/>
      <constraint>
        <max value="65534"/>
      </constraint>
    </attribute>
    <attribute id="0x0013" name="InstalledClosedLimitTilt" type="uint16">
      <access read="true" readPrivilege="view"/>
      <quality persistence="nonVolatile"/>
      <obsoleteConform/>
      <constraint>
        <max value="65534"/>
      </constraint>
    </attribute>
    <attribute id="0x0017" name="Mode" type="ModeBitmap" default="0">
      <access read="true" write="true" readPrivilege="view" writePrivilege="manage"/>
      <quality persistence="nonVolatile"/>
      <mandatoryConform/>
      <constraint>
        <max value="15"/>
      </constraint>
    </attribute>
    <attribute id="0x001A" name="SafetyStatus" type="SafetyStatusBitmap" default="0">
      <access read="true" readPrivilege="view"/>
      <optionalConform/>
      <constraint>
        <desc/>
      </constraint>
    </attribute>
  </attributes>
  <commands>
    <command id="0x00" name="UpOrOpen" direction="commandToServer" response="Y">
      <access invokePrivilege="operate"/>
      <mandatoryConform/>
    </command>
    <command id="0x01" name="DownOrClose" direction="commandToServer" response="Y">
      <access invokePrivilege="operate"/>
      <mandatoryConform/>
    </command>
    <command id="0x02" name="StopMotion" direction="commandToServer" response="Y">
      <access invokePrivilege="operate"/>
      <mandatoryConform/>
    </command>
    <command id="0x04" name="GoToLiftValue" direction="commandToServer" response="Y">
      <access invokePrivilege="operate"/>
      <obsoleteConform/>
      <field id="0" name="LiftValue" type="uint16">
        <mandatoryConform/>
        <constraint>
          <desc/>
        </constraint>
      </field>
    </command>
    <command id="0x05" name="GoToLiftPercentage" direction="commandToServer" response="Y">
      <access invokePrivilege="operate"/>
      <otherwiseConform>
        <mandatoryConform>
          <andTerm>
            <feature name="LF"/>
            <feature name="PA_LF"/>
          </andTerm>
        </mandatoryConform>
        <optionalConform>
          <feature name="LF"/>
        </optionalConform>
      </otherwiseConform>
      <field id="0" name="LiftPercent100thsValue" type="percent100ths">
        <mandatoryConform/>
        <constraint>
          <desc/>
        </constraint>
      </field>
    </command>
    <command id="0x07" name="GoToTiltValue" direction="commandToServer" response="Y">
      <access invokePrivilege="operate"/>
      <obsoleteConform/>
      <field id="0" name="TiltValue" type="uint16">
        <mandatoryConform/>
        <constraint>
          <desc/>
        </constraint>
      </field>
    </command>
    <command id="0x08" name="GoToTiltPercentage" direction="commandToServer" response="Y">
      <access invokePrivilege="operate"/>
      <otherwiseConform>
        <mandatoryConform>
          <andTerm>
            <feature name="TL"/>
            <feature name="PA_TL"/>
          </andTerm>
        </mandatoryConform>
        <optionalConform>
          <feature name="TL"/>
        </optionalConform>
      </otherwiseConform>
      <field id="0" name="TiltPercent100thsValue" type="percent100ths">
        <mandatoryConform/>
        <constraint>
          <desc/>
        </constraint>
      </field>
    </command>
  </commands>
</cluster>