| /* |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * Copyright (c) 2019 Google LLC. |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /********************************************************** |
| * Includes |
| *********************************************************/ |
| |
| #include "AppConfig.h" |
| #include "AppEvent.h" |
| #include "AppTask.h" |
| |
| #include <app/server/Server.h> |
| |
| #ifdef DISPLAY_ENABLED |
| #include "lcd.h" |
| #ifdef QR_CODE_ENABLED |
| #include "qrcodegen.h" |
| #endif // QR_CODE_ENABLED |
| #endif // DISPLAY_ENABLED |
| |
| #include "SilabsDeviceDataProvider.h" |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER == 1 |
| #include <app/icd/server/ICDNotifier.h> // nogncheck |
| #endif |
| #include <app/server/OnboardingCodesUtil.h> |
| #include <app/util/attribute-storage.h> |
| #include <assert.h> |
| #include <lib/support/CodeUtils.h> |
| #include <platform/CHIPDeviceLayer.h> |
| #include <setup_payload/QRCodeSetupPayloadGenerator.h> |
| #include <setup_payload/SetupPayload.h> |
| #include <sl_cmsis_os2_common.h> |
| |
| #if CHIP_ENABLE_OPENTHREAD |
| #include <platform/OpenThread/OpenThreadUtils.h> |
| #include <platform/ThreadStackManager.h> |
| #include <platform/silabs/ThreadStackManagerImpl.h> |
| #endif // CHIP_ENABLE_OPENTHREAD |
| |
| #include <platform/silabs/platformAbstraction/SilabsPlatform.h> |
| |
| #ifdef SL_WIFI |
| #include "wfx_host_events.h" |
| #include <app/clusters/network-commissioning/network-commissioning.h> |
| #include <platform/silabs/NetworkCommissioningWiFiDriver.h> |
| #endif // SL_WIFI |
| |
| #ifdef DIC_ENABLE |
| #include "dic.h" |
| #include "dic_control.h" |
| #endif // DIC_ENABLE |
| |
| #ifdef PERFORMANCE_TEST_ENABLED |
| #include <performance_test_commands.h> |
| #endif // PERFORMANCE_TEST_ENABLED |
| |
| /********************************************************** |
| * Defines and Constants |
| *********************************************************/ |
| |
| #define FACTORY_RESET_TRIGGER_TIMEOUT 3000 |
| #define FACTORY_RESET_CANCEL_WINDOW_TIMEOUT 3000 |
| #ifndef APP_TASK_STACK_SIZE |
| #define APP_TASK_STACK_SIZE (4096) |
| #endif |
| #ifndef APP_EVENT_QUEUE_SIZE // Allow apps to define a different app queue size |
| #define APP_EVENT_QUEUE_SIZE 10 |
| #endif |
| #define EXAMPLE_VENDOR_ID 0xcafe |
| |
| #if (defined(ENABLE_WSTK_LEDS) && (defined(SL_CATALOG_SIMPLE_LED_LED1_PRESENT))) |
| #define SYSTEM_STATE_LED 0 |
| #endif // ENABLE_WSTK_LEDS |
| #define APP_FUNCTION_BUTTON 0 |
| |
| using namespace chip; |
| using namespace chip::app; |
| using namespace ::chip::DeviceLayer; |
| using namespace ::chip::DeviceLayer::Silabs; |
| |
| namespace { |
| |
| /********************************************************** |
| * Variable declarations |
| *********************************************************/ |
| |
| osTimerId_t sFunctionTimer; |
| osTimerId_t sLightTimer; |
| osThreadId_t sAppTaskHandle; |
| osMessageQueueId_t sAppEventQueue; |
| |
| #if (defined(ENABLE_WSTK_LEDS) && (defined(SL_CATALOG_SIMPLE_LED_LED1_PRESENT))) |
| LEDWidget sStatusLED; |
| #endif // ENABLE_WSTK_LEDS |
| |
| #ifdef SL_WIFI |
| app::Clusters::NetworkCommissioning::Instance |
| sWiFiNetworkCommissioningInstance(0 /* Endpoint Id */, &(NetworkCommissioning::SlWiFiDriver::GetInstance())); |
| #endif /* SL_WIFI */ |
| |
| #if !(defined(CHIP_CONFIG_ENABLE_ICD_SERVER) && CHIP_CONFIG_ENABLE_ICD_SERVER) |
| bool sIsEnabled = false; |
| bool sIsAttached = false; |
| bool sHaveBLEConnections = false; |
| #endif // CHIP_CONFIG_ENABLE_ICD_SERVER |
| |
| constexpr uint32_t kLightTimerPeriod = static_cast<uint32_t>(pdMS_TO_TICKS(10)); |
| |
| uint8_t sAppEventQueueBuffer[APP_EVENT_QUEUE_SIZE * sizeof(AppEvent)]; |
| osMessageQueue_t sAppEventQueueStruct; |
| constexpr osMessageQueueAttr_t appEventQueueAttr = { .cb_mem = &sAppEventQueueStruct, |
| .cb_size = osMessageQueueCbSize, |
| .mq_mem = sAppEventQueueBuffer, |
| .mq_size = sizeof(sAppEventQueueBuffer) }; |
| |
| uint8_t appStack[APP_TASK_STACK_SIZE]; |
| osThread_t appTaskControlBlock; |
| constexpr osThreadAttr_t appTaskAttr = { .name = APP_TASK_NAME, |
| .attr_bits = osThreadDetached, |
| .cb_mem = &appTaskControlBlock, |
| .cb_size = osThreadCbSize, |
| .stack_mem = appStack, |
| .stack_size = APP_TASK_STACK_SIZE, |
| .priority = osPriorityNormal }; |
| |
| #ifdef DISPLAY_ENABLED |
| SilabsLCD slLCD; |
| #endif |
| |
| #ifdef MATTER_DM_PLUGIN_IDENTIFY_SERVER |
| Clusters::Identify::EffectIdentifierEnum sIdentifyEffect = Clusters::Identify::EffectIdentifierEnum::kStopEffect; |
| |
| Identify gIdentify = { |
| chip::EndpointId{ 1 }, |
| BaseApplication::OnIdentifyStart, |
| BaseApplication::OnIdentifyStop, |
| Clusters::Identify::IdentifyTypeEnum::kVisibleIndicator, |
| BaseApplication::OnTriggerIdentifyEffect, |
| }; |
| |
| #endif // MATTER_DM_PLUGIN_IDENTIFY_SERVER |
| } // namespace |
| |
| bool BaseApplication::sIsProvisioned = false; |
| bool BaseApplication::sIsFactoryResetTriggered = false; |
| LEDWidget * BaseApplication::sAppActionLed = nullptr; |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER && SLI_SI917 |
| BaseApplicationDelegate BaseApplication::sAppDelegate = BaseApplicationDelegate(); |
| #endif // CHIP_CONFIG_ENABLE_ICD_SERVER && SLI_SI917 |
| |
| #ifdef DIC_ENABLE |
| namespace { |
| void AppSpecificConnectivityEventCallback(const ChipDeviceEvent * event, intptr_t arg) |
| { |
| SILABS_LOG("AppSpecificConnectivityEventCallback: call back for IPV4"); |
| if ((event->Type == DeviceEventType::kInternetConnectivityChange) && |
| (event->InternetConnectivityChange.IPv4 == kConnectivity_Established)) |
| { |
| SILABS_LOG("Got IPv4 Address! Starting DIC module\n"); |
| if (DIC_OK != dic_init(dic::control::subscribeCB)) |
| SILABS_LOG("Failed to initialize DIC module\n"); |
| } |
| } |
| } // namespace |
| #endif // DIC_ENABLE |
| |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER && SLI_SI917 |
| void BaseApplicationDelegate::OnCommissioningSessionStarted() |
| { |
| isComissioningStarted = true; |
| } |
| void BaseApplicationDelegate::OnCommissioningSessionStopped() |
| { |
| isComissioningStarted = false; |
| } |
| void BaseApplicationDelegate::OnCommissioningWindowClosed() |
| { |
| if (!BaseApplication::GetProvisionStatus() && !isComissioningStarted) |
| { |
| int32_t status = wfx_power_save(RSI_SLEEP_MODE_8, STANDBY_POWER_SAVE_WITH_RAM_RETENTION); |
| if (status != SL_STATUS_OK) |
| { |
| ChipLogError(DeviceLayer, "Failed to enable the TA Deep Sleep"); |
| } |
| } |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_SERVER && SLI_SI917 |
| |
| /********************************************************** |
| * AppTask Definitions |
| *********************************************************/ |
| |
| CHIP_ERROR BaseApplication::StartAppTask(osThreadFunc_t taskFunction) |
| { |
| sAppEventQueue = osMessageQueueNew(APP_EVENT_QUEUE_SIZE, sizeof(AppEvent), &appEventQueueAttr); |
| if (sAppEventQueue == NULL) |
| { |
| SILABS_LOG("Failed to allocate app event queue"); |
| appError(APP_ERROR_EVENT_QUEUE_FAILED); |
| } |
| |
| // Start App task. |
| sAppTaskHandle = osThreadNew(taskFunction, &sAppEventQueue, &appTaskAttr); |
| if (sAppTaskHandle == nullptr) |
| { |
| SILABS_LOG("Failed to create app task"); |
| appError(APP_ERROR_CREATE_TASK_FAILED); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BaseApplication::Init() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| #ifdef SL_WIFI |
| /* |
| * Wait for the WiFi to be initialized |
| */ |
| SILABS_LOG("APP: Wait WiFi Init"); |
| while (!wfx_hw_ready()) |
| { |
| vTaskDelay(pdMS_TO_TICKS(10)); |
| } |
| SILABS_LOG("APP: Done WiFi Init"); |
| /* We will init server when we get IP */ |
| |
| chip::DeviceLayer::PlatformMgr().LockChipStack(); |
| sWiFiNetworkCommissioningInstance.Init(); |
| chip::DeviceLayer::PlatformMgr().UnlockChipStack(); |
| |
| #endif |
| |
| // Create cmsis os sw timer for Function Selection. |
| sFunctionTimer = osTimerNew(FunctionTimerEventHandler, // timer callback handler |
| osTimerOnce, // no timer reload (one-shot timer) |
| (void *) this, // pass the app task obj context |
| NULL // No osTimerAttr_t to provide. |
| ); |
| if (sFunctionTimer == NULL) |
| { |
| SILABS_LOG("funct timer create failed"); |
| appError(APP_ERROR_CREATE_TIMER_FAILED); |
| } |
| |
| // Create cmsis os sw timer for LED Management. |
| sLightTimer = osTimerNew(LightTimerEventHandler, // Timer callback handler"LightTmr", |
| osTimerPeriodic, // timer repeats automatically |
| (void *) this, // pass the app task obj context |
| NULL // No osTimerAttr_t to provide. |
| ); |
| if (sLightTimer == NULL) |
| { |
| SILABS_LOG("Light Timer create failed"); |
| appError(APP_ERROR_CREATE_TIMER_FAILED); |
| } |
| |
| SILABS_LOG("Current Software Version String: %s", CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING); |
| SILABS_LOG("Current Software Version: %d", CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION); |
| |
| #ifdef DIC_ENABLE |
| chip::DeviceLayer::PlatformMgr().AddEventHandler(AppSpecificConnectivityEventCallback, reinterpret_cast<intptr_t>(nullptr)); |
| #endif // DIC_ENABLE |
| |
| ConfigurationMgr().LogDeviceConfig(); |
| |
| OutputQrCode(true /*refreshLCD at init*/); |
| #if (defined(ENABLE_WSTK_LEDS) && (defined(SL_CATALOG_SIMPLE_LED_LED1_PRESENT))) |
| LEDWidget::InitGpio(); |
| sStatusLED.Init(SYSTEM_STATE_LED); |
| #endif // ENABLE_WSTK_LEDS |
| |
| #ifdef PERFORMANCE_TEST_ENABLED |
| RegisterPerfTestCommands(); |
| #endif // PERFORMANCE_TEST_ENABLED |
| |
| PlatformMgr().AddEventHandler(OnPlatformEvent, 0); |
| #ifdef SL_WIFI |
| BaseApplication::sIsProvisioned = ConnectivityMgr().IsWiFiStationProvisioned(); |
| #endif /* SL_WIFI */ |
| #if CHIP_ENABLE_OPENTHREAD |
| BaseApplication::sIsProvisioned = ConnectivityMgr().IsThreadProvisioned(); |
| #endif |
| return err; |
| } |
| |
| void BaseApplication::FunctionTimerEventHandler(void * timerCbArg) |
| { |
| AppEvent event; |
| event.Type = AppEvent::kEventType_Timer; |
| event.TimerEvent.Context = timerCbArg; |
| event.Handler = FunctionEventHandler; |
| PostEvent(&event); |
| } |
| |
| void BaseApplication::FunctionEventHandler(AppEvent * aEvent) |
| { |
| VerifyOrReturn(aEvent->Type == AppEvent::kEventType_Timer); |
| // If we reached here, the button was held past FACTORY_RESET_TRIGGER_TIMEOUT, |
| if (!sIsFactoryResetTriggered) |
| { |
| StartFactoryResetSequence(); |
| } |
| else |
| { |
| // The factory reset sequence was in motion. The cancellation window expired. |
| // Factory Reset the device now. |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER == 1 |
| StopStatusLEDTimer(); |
| #endif // CHIP_CONFIG_ENABLE_ICD_SERVER |
| |
| ScheduleFactoryReset(); |
| } |
| } |
| |
| bool BaseApplication::ActivateStatusLedPatterns() |
| { |
| bool isPatternSet = false; |
| #if (defined(ENABLE_WSTK_LEDS) && (defined(SL_CATALOG_SIMPLE_LED_LED1_PRESENT))) |
| #ifdef MATTER_DM_PLUGIN_IDENTIFY_SERVER |
| if (gIdentify.mActive) |
| { |
| // Identify in progress |
| // Do a steady blink on the status led |
| sStatusLED.Blink(250, 250); |
| isPatternSet = true; |
| } |
| else if (sIdentifyEffect != Clusters::Identify::EffectIdentifierEnum::kStopEffect) |
| { |
| // Identify trigger effect received. Do some on/off patterns on the status led |
| if (sIdentifyEffect == Clusters::Identify::EffectIdentifierEnum::kBlink) |
| { |
| // Fast blink |
| sStatusLED.Blink(50, 50); |
| } |
| else if (sIdentifyEffect == Clusters::Identify::EffectIdentifierEnum::kBreathe) |
| { |
| // Slow blink |
| sStatusLED.Blink(1000, 1000); |
| } |
| else if (sIdentifyEffect == Clusters::Identify::EffectIdentifierEnum::kOkay) |
| { |
| // Pulse effect |
| sStatusLED.Blink(300, 700); |
| } |
| else if (sIdentifyEffect == Clusters::Identify::EffectIdentifierEnum::kChannelChange) |
| { |
| // Alternate between Short and Long pulses effect |
| static uint64_t mLastChangeTimeMS = 0; |
| static bool alternatePattern = false; |
| uint32_t onTimeMS = alternatePattern ? 50 : 700; |
| uint32_t offTimeMS = alternatePattern ? 950 : 300; |
| |
| uint64_t nowMS = chip::System::SystemClock().GetMonotonicMilliseconds64().count(); |
| if (nowMS >= mLastChangeTimeMS + 1000) // each pattern is done over a 1 second period |
| { |
| mLastChangeTimeMS = nowMS; |
| alternatePattern = !alternatePattern; |
| sStatusLED.Blink(onTimeMS, offTimeMS); |
| } |
| } |
| isPatternSet = true; |
| } |
| #endif // MATTER_DM_PLUGIN_IDENTIFY_SERVER |
| |
| #if !(defined(CHIP_CONFIG_ENABLE_ICD_SERVER) && CHIP_CONFIG_ENABLE_ICD_SERVER) |
| // Identify Patterns have priority over Status patterns |
| if (!isPatternSet) |
| { |
| // Apply different status feedbacks |
| if (BaseApplication::sIsProvisioned && sIsEnabled) |
| { |
| if (sIsAttached) |
| { |
| sStatusLED.Set(true); |
| } |
| else |
| { |
| sStatusLED.Blink(950, 50); |
| } |
| } |
| else if (sHaveBLEConnections) |
| { |
| sStatusLED.Blink(100, 100); |
| } |
| else |
| { |
| sStatusLED.Blink(50, 950); |
| } |
| isPatternSet = true; |
| } |
| #endif // CHIP_CONFIG_ENABLE_ICD_SERVER |
| #endif // ENABLE_WSTK_LEDS) && SL_CATALOG_SIMPLE_LED_LED1_PRESENT |
| return isPatternSet; |
| } |
| |
| // TODO Move State Monitoring elsewhere |
| void BaseApplication::LightEventHandler() |
| { |
| // Collect connectivity and configuration state from the CHIP stack. Because |
| // the CHIP event loop is being run in a separate task, the stack must be |
| // locked while these values are queried. However we use a non-blocking |
| // lock request (TryLockCHIPStack()) to avoid blocking other UI activities |
| // when the CHIP task is busy (e.g. with a long crypto operation). |
| #if !(defined(CHIP_CONFIG_ENABLE_ICD_SERVER) && CHIP_CONFIG_ENABLE_ICD_SERVER) |
| if (PlatformMgr().TryLockChipStack()) |
| { |
| #ifdef SL_WIFI |
| BaseApplication::sIsProvisioned = ConnectivityMgr().IsWiFiStationProvisioned(); |
| sIsEnabled = ConnectivityMgr().IsWiFiStationEnabled(); |
| sIsAttached = ConnectivityMgr().IsWiFiStationConnected(); |
| #endif /* SL_WIFI */ |
| #if CHIP_ENABLE_OPENTHREAD |
| sIsEnabled = ConnectivityMgr().IsThreadEnabled(); |
| sIsAttached = ConnectivityMgr().IsThreadAttached(); |
| #endif /* CHIP_ENABLE_OPENTHREAD */ |
| sHaveBLEConnections = (ConnectivityMgr().NumBLEConnections() != 0); |
| |
| PlatformMgr().UnlockChipStack(); |
| } |
| |
| #endif // CHIP_CONFIG_ENABLE_ICD_SERVER |
| |
| #if defined(ENABLE_WSTK_LEDS) |
| #ifdef SL_CATALOG_SIMPLE_LED_LED1_PRESENT |
| // Update the status LED if factory reset has not been initiated. |
| // |
| // If system has "full connectivity", keep the LED On constantly. |
| // |
| // If thread and service provisioned, but not attached to the thread network |
| // yet OR no connectivity to the service OR subscriptions are not fully |
| // established THEN blink the LED Off for a short period of time. |
| // |
| // If the system has ble connection(s) uptill the stage above, THEN blink |
| // the LEDs at an even rate of 100ms. |
| // |
| // Otherwise, blink the LED ON for a very short time. |
| if (!sIsFactoryResetTriggered) |
| { |
| ActivateStatusLedPatterns(); |
| } |
| |
| sStatusLED.Animate(); |
| #endif // SL_CATALOG_SIMPLE_LED_LED1_PRESENT |
| if (sAppActionLed) |
| { |
| sAppActionLed->Animate(); |
| } |
| #endif // ENABLE_WSTK_LEDS |
| } |
| |
| void BaseApplication::ButtonHandler(AppEvent * aEvent) |
| { |
| // To trigger software update: press the APP_FUNCTION_BUTTON button briefly (< |
| // FACTORY_RESET_TRIGGER_TIMEOUT) To initiate factory reset: press the |
| // APP_FUNCTION_BUTTON for FACTORY_RESET_TRIGGER_TIMEOUT + |
| // FACTORY_RESET_CANCEL_WINDOW_TIMEOUT All LEDs start blinking after |
| // FACTORY_RESET_TRIGGER_TIMEOUT to signal factory reset has been initiated. |
| // To cancel factory reset: release the APP_FUNCTION_BUTTON once all LEDs |
| // start blinking within the FACTORY_RESET_CANCEL_WINDOW_TIMEOUT |
| if (aEvent->ButtonEvent.Action == static_cast<uint8_t>(SilabsPlatform::ButtonAction::ButtonPressed)) |
| { |
| StartFunctionTimer(FACTORY_RESET_TRIGGER_TIMEOUT); |
| } |
| else |
| { |
| if (sIsFactoryResetTriggered) |
| { |
| CancelFactoryResetSequence(); |
| } |
| else |
| { |
| // The factory reset sequence was not initiated, |
| // Press and Release: |
| // - Open the commissioning window and start BLE advertisement in fast mode when not commissioned |
| // - Output qr code in logs |
| // - Cycle LCD screen |
| CancelFunctionTimer(); |
| |
| AppTask::GetAppTask().UpdateDisplay(); |
| |
| #ifdef SL_WIFI |
| if (!ConnectivityMgr().IsWiFiStationProvisioned()) |
| #else |
| if (!BaseApplication::sIsProvisioned) |
| #endif /* !SL_WIFI */ |
| { |
| // Open Basic CommissioningWindow. Will start BLE advertisements |
| chip::DeviceLayer::PlatformMgr().LockChipStack(); |
| CHIP_ERROR err = chip::Server::GetInstance().GetCommissioningWindowManager().OpenBasicCommissioningWindow(); |
| chip::DeviceLayer::PlatformMgr().UnlockChipStack(); |
| if (err != CHIP_NO_ERROR) |
| { |
| SILABS_LOG("Failed to open the Basic Commissioning Window"); |
| } |
| } |
| else |
| { |
| SILABS_LOG("Network is already provisioned, Ble advertisement not enabled"); |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER |
| // Temporarily claim network activity, until we implement a "user trigger" reason for ICD wakeups. |
| PlatformMgr().ScheduleWork([](intptr_t) { ICDNotifier::GetInstance().NotifyNetworkActivityNotification(); }); |
| #endif // CHIP_CONFIG_ENABLE_ICD_SERVER |
| } |
| } |
| } |
| } |
| |
| void BaseApplication::UpdateDisplay() |
| { |
| OutputQrCode(false); |
| #ifdef DISPLAY_ENABLED |
| UpdateLCDStatusScreen(); |
| slLCD.CycleScreens(); |
| #endif |
| } |
| |
| void BaseApplication::CancelFunctionTimer() |
| { |
| if (osTimerStop(sFunctionTimer) == osError) |
| { |
| SILABS_LOG("app timer stop() failed"); |
| appError(APP_ERROR_STOP_TIMER_FAILED); |
| } |
| } |
| |
| void BaseApplication::StartFunctionTimer(uint32_t aTimeoutInMs) |
| { |
| // Starts or restarts the function timer |
| if (osTimerStart(sFunctionTimer, pdMS_TO_TICKS(aTimeoutInMs)) != osOK) |
| { |
| SILABS_LOG("app timer start() failed"); |
| appError(APP_ERROR_START_TIMER_FAILED); |
| } |
| } |
| |
| void BaseApplication::StartFactoryResetSequence() |
| { |
| // Initiate the factory reset sequence |
| SILABS_LOG("Factory Reset Triggered. Release button within %ums to cancel.", FACTORY_RESET_CANCEL_WINDOW_TIMEOUT); |
| |
| // Start timer for FACTORY_RESET_CANCEL_WINDOW_TIMEOUT to allow user to |
| // cancel, if required. |
| StartFunctionTimer(FACTORY_RESET_CANCEL_WINDOW_TIMEOUT); |
| |
| sIsFactoryResetTriggered = true; |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER == 1 |
| StartStatusLEDTimer(); |
| #endif // CHIP_CONFIG_ENABLE_ICD_SERVER |
| |
| #if (defined(ENABLE_WSTK_LEDS) && (defined(SL_CATALOG_SIMPLE_LED_LED1_PRESENT))) |
| // Turn off all LEDs before starting blink to make sure blink is |
| // co-ordinated. |
| sStatusLED.Set(false); |
| sStatusLED.Blink(500); |
| #endif // ENABLE_WSTK_LEDS |
| } |
| |
| void BaseApplication::CancelFactoryResetSequence() |
| { |
| CancelFunctionTimer(); |
| |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER == 1 |
| StopStatusLEDTimer(); |
| #endif |
| if (sIsFactoryResetTriggered) |
| { |
| sIsFactoryResetTriggered = false; |
| SILABS_LOG("Factory Reset has been Canceled"); |
| } |
| } |
| |
| void BaseApplication::StartStatusLEDTimer() |
| { |
| if (osTimerStart(sLightTimer, kLightTimerPeriod) != osOK) |
| { |
| SILABS_LOG("Light Time start failed"); |
| appError(APP_ERROR_START_TIMER_FAILED); |
| } |
| } |
| |
| void BaseApplication::StopStatusLEDTimer() |
| { |
| #if (defined(ENABLE_WSTK_LEDS) && (defined(SL_CATALOG_SIMPLE_LED_LED1_PRESENT))) |
| sStatusLED.Set(false); |
| #endif // ENABLE_WSTK_LEDS |
| |
| if (osTimerStop(sLightTimer) == osError) |
| { |
| SILABS_LOG("Light Time start failed"); |
| appError(APP_ERROR_STOP_TIMER_FAILED); |
| } |
| } |
| |
| #ifdef MATTER_DM_PLUGIN_IDENTIFY_SERVER |
| void BaseApplication::OnIdentifyStart(Identify * identify) |
| { |
| ChipLogProgress(Zcl, "onIdentifyStart"); |
| |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER == 1 |
| StartStatusLEDTimer(); |
| #endif |
| } |
| |
| void BaseApplication::OnIdentifyStop(Identify * identify) |
| { |
| ChipLogProgress(Zcl, "onIdentifyStop"); |
| |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER == 1 |
| StopStatusLEDTimer(); |
| #endif |
| } |
| |
| void BaseApplication::OnTriggerIdentifyEffectCompleted(chip::System::Layer * systemLayer, void * appState) |
| { |
| ChipLogProgress(Zcl, "Trigger Identify Complete"); |
| sIdentifyEffect = Clusters::Identify::EffectIdentifierEnum::kStopEffect; |
| |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER == 1 |
| StopStatusLEDTimer(); |
| #endif |
| } |
| |
| void BaseApplication::OnTriggerIdentifyEffect(Identify * identify) |
| { |
| sIdentifyEffect = identify->mCurrentEffectIdentifier; |
| |
| if (identify->mEffectVariant != Clusters::Identify::EffectVariantEnum::kDefault) |
| { |
| ChipLogDetail(AppServer, "Identify Effect Variant unsupported. Using default"); |
| } |
| |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER == 1 |
| StartStatusLEDTimer(); |
| #endif |
| |
| switch (sIdentifyEffect) |
| { |
| case Clusters::Identify::EffectIdentifierEnum::kBlink: |
| case Clusters::Identify::EffectIdentifierEnum::kOkay: |
| (void) chip::DeviceLayer::SystemLayer().StartTimer(chip::System::Clock::Seconds16(5), OnTriggerIdentifyEffectCompleted, |
| identify); |
| break; |
| case Clusters::Identify::EffectIdentifierEnum::kBreathe: |
| case Clusters::Identify::EffectIdentifierEnum::kChannelChange: |
| (void) chip::DeviceLayer::SystemLayer().StartTimer(chip::System::Clock::Seconds16(10), OnTriggerIdentifyEffectCompleted, |
| identify); |
| break; |
| case Clusters::Identify::EffectIdentifierEnum::kFinishEffect: |
| (void) chip::DeviceLayer::SystemLayer().CancelTimer(OnTriggerIdentifyEffectCompleted, identify); |
| (void) chip::DeviceLayer::SystemLayer().StartTimer(chip::System::Clock::Seconds16(1), OnTriggerIdentifyEffectCompleted, |
| identify); |
| break; |
| case Clusters::Identify::EffectIdentifierEnum::kStopEffect: |
| (void) chip::DeviceLayer::SystemLayer().CancelTimer(OnTriggerIdentifyEffectCompleted, identify); |
| break; |
| default: |
| sIdentifyEffect = Clusters::Identify::EffectIdentifierEnum::kStopEffect; |
| ChipLogProgress(Zcl, "No identifier effect"); |
| } |
| } |
| #endif // MATTER_DM_PLUGIN_IDENTIFY_SERVER |
| |
| void BaseApplication::LightTimerEventHandler(void * timerCbArg) |
| { |
| LightEventHandler(); |
| } |
| |
| #ifdef DISPLAY_ENABLED |
| SilabsLCD & BaseApplication::GetLCD(void) |
| { |
| return slLCD; |
| } |
| |
| void BaseApplication::UpdateLCDStatusScreen(void) |
| { |
| SilabsLCD::DisplayStatus_t status; |
| bool enabled, attached; |
| chip::DeviceLayer::PlatformMgr().LockChipStack(); |
| #ifdef SL_WIFI |
| enabled = ConnectivityMgr().IsWiFiStationEnabled(); |
| attached = ConnectivityMgr().IsWiFiStationConnected(); |
| #endif /* SL_WIFI */ |
| #if CHIP_ENABLE_OPENTHREAD |
| enabled = ConnectivityMgr().IsThreadEnabled(); |
| attached = ConnectivityMgr().IsThreadAttached(); |
| #endif /* CHIP_ENABLE_OPENTHREAD */ |
| status.connected = enabled && attached; |
| status.advertising = chip::Server::GetInstance().GetCommissioningWindowManager().IsCommissioningWindowOpen(); |
| status.nbFabric = chip::Server::GetInstance().GetFabricTable().FabricCount(); |
| #if CHIP_CONFIG_ENABLE_ICD_SERVER |
| status.icdMode = (ICDConfigurationData::GetInstance().GetICDMode() == ICDConfigurationData::ICDMode::SIT) |
| ? SilabsLCD::ICDMode_e::SIT |
| : SilabsLCD::ICDMode_e::LIT; |
| #endif |
| chip::DeviceLayer::PlatformMgr().UnlockChipStack(); |
| slLCD.SetStatus(status); |
| } |
| #endif |
| |
| void BaseApplication::PostEvent(const AppEvent * aEvent) |
| { |
| if (sAppEventQueue != nullptr) |
| { |
| if (osMessageQueuePut(sAppEventQueue, aEvent, osPriorityNormal, 0) != osOK) |
| { |
| SILABS_LOG("Failed to post event to app task event queue"); |
| } |
| } |
| else |
| { |
| SILABS_LOG("App Event Queue is uninitialized"); |
| } |
| } |
| |
| void BaseApplication::DispatchEvent(AppEvent * aEvent) |
| { |
| if (aEvent->Handler) |
| { |
| aEvent->Handler(aEvent); |
| } |
| else |
| { |
| SILABS_LOG("Event received with no handler. Dropping event."); |
| } |
| } |
| |
| void BaseApplication::ScheduleFactoryReset() |
| { |
| PlatformMgr().ScheduleWork([](intptr_t) { |
| PlatformMgr().HandleServerShuttingDown(); |
| ConfigurationMgr().InitiateFactoryReset(); |
| }); |
| } |
| |
| void BaseApplication::OnPlatformEvent(const ChipDeviceEvent * event, intptr_t) |
| { |
| if (event->Type == DeviceEventType::kServiceProvisioningChange) |
| { |
| BaseApplication::sIsProvisioned = event->ServiceProvisioningChange.IsServiceProvisioned; |
| } |
| } |
| |
| void BaseApplication::OutputQrCode(bool refreshLCD) |
| { |
| (void) refreshLCD; // could be unused |
| |
| // Create buffer for the Qr code setup payload that can fit max size and null terminator. |
| char setupPayloadBuffer[chip::QRCodeBasicSetupPayloadGenerator::kMaxQRCodeBase38RepresentationLength + 1]; |
| chip::MutableCharSpan setupPayload(setupPayloadBuffer); |
| |
| if (Silabs::SilabsDeviceDataProvider::GetDeviceDataProvider().GetSetupPayload(setupPayload) == CHIP_NO_ERROR) |
| { |
| // Print setup info on LCD if available |
| #ifdef QR_CODE_ENABLED |
| if (refreshLCD) |
| { |
| slLCD.SetQRCode((uint8_t *) setupPayload.data(), setupPayload.size()); |
| slLCD.ShowQRCode(true); |
| } |
| #endif // QR_CODE_ENABLED |
| |
| PrintQrCodeURL(setupPayload); |
| } |
| else |
| { |
| SILABS_LOG("Getting QR code failed!"); |
| } |
| } |
| |
| bool BaseApplication::GetProvisionStatus() |
| { |
| return BaseApplication::sIsProvisioned; |
| } |
