| /** |
| * @file |
| * @brief Segger System View configuration file. |
| ******************************************************************************* |
| * # License |
| * <b>Copyright 2020 Silicon Laboratories Inc. |
| *www.silabs.com</b> |
| ******************************************************************************* |
| * |
| * SPDX-License-Identifier: Zlib |
| * |
| * The licensor of this software is Silicon |
| *Laboratories Inc. |
| * |
| * This software is provided 'as-is', without any |
| *express or implied warranty. In no event will the |
| *authors be held liable for any damages arising from |
| *the use of this software. |
| * |
| * Permission is granted to anyone to use this |
| *software for any purpose, including commercial |
| *applications, and to alter it and redistribute it |
| * freely, subject to the following restrictions: |
| * |
| * 1. The origin of this software must not be |
| *misrepresented; you must not claim that you wrote |
| *the original software. If you use this software in a |
| *product, an acknowledgment in the product |
| *documentation would be appreciated but is not |
| *required. |
| * 2. Altered source versions must be plainly marked |
| *as such, and must not be misrepresented as being the |
| *original software. |
| * 3. This notice may not be removed or altered from |
| *any source distribution. |
| * |
| ******************************************************************************/ |
| |
| // Overwirte SystemView config for GN build, SHOULD NOT BE USED WITH SLC!!! |
| |
| #pragma once |
| |
| #define SEGGER_SYSVIEW_TIMESTAMP_SOURCE_DWT 0 |
| #define SEGGER_SYSVIEW_TIMESTAMP_SOURCE_SLEEPTIMER 1 |
| |
| // <o SEGGER_SYSVIEW_TIMESTAMP_SOURCE> Source for the time stamps |
| // <SEGGER_SYSVIEW_TIMESTAMP_SOURCE_DWT=> DWT Cycle Counter |
| // <SEGGER_SYSVIEW_TIMESTAMP_SOURCE_SLEEPTIMER=> Sleep Timer |
| // <i> Source for time stamps. Only meaningful when no OS is present. When an OS is present, time stamp is provided by the OS. |
| // <i> SEGGER_SYSVIEW_TIMESTAMP_SOURCE_DWT is not available on Cortex-M0+ and cannot be selected. |
| // <i> Default: SEGGER_SYSVIEW_TIMESTAMP_SOURCE_SLEEPTIMER |
| #define SEGGER_SYSVIEW_TIMESTAMP_SOURCE SEGGER_SYSVIEW_TIMESTAMP_SOURCE_SLEEPTIMER |
| |
| // <o SEGGER_SYSVIEW_RTT_BUFFER_SIZE> RTT buffer size (in bytes) |
| // <i> Default: 1024 |
| #define SEGGER_SYSVIEW_RTT_BUFFER_SIZE 8192 |
| |
| // <o SEGGER_SYSVIEW_RTT_CHANNEL> RTT channel for SystemView |
| // <i> Default: 1 |
| #define SEGGER_SYSVIEW_RTT_CHANNEL 1 |
| |
| // <q SEGGER_SYSVIEW_USE_STATIC_BUFFER> Use static buffer to generate events |
| // <i> Determines if a single static buffer is used to generate the events. If disabled, the buffer is allocated on the stack. |
| // <i> Default: 1 |
| #define SEGGER_SYSVIEW_USE_STATIC_BUFFER 1 |
| |
| // <q SEGGER_SYSVIEW_POST_MORTEM_MODE> Enable post mortem mode |
| // <i> Default: 0 |
| #define SEGGER_SYSVIEW_POST_MORTEM_MODE 0 |
| |
| // <q SEGGER_SYSVIEW_CAN_RESTART> Enable SystemView restart |
| // <i> If enabled, start sequence is sent on every startup. It is not recommended to disabled this feature. |
| // <i> Default: 1 |
| #define SEGGER_SYSVIEW_CAN_RESTART 1 |
| |
| // <q SEGGER_SYSVIEW_ID_SHIFT> Number of bits to shift the Id to save bandwidth. (i.e. 2 when Ids are 4 byte aligned) |
| // <i> Default: 0 |
| #define SEGGER_SYSVIEW_ID_SHIFT 0 |
| |
| // <<< end of configuration section >>> |
