| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * Provides an implementation of the BLEManager singleton object |
| * for the stm32wb55 platforms. |
| */ |
| |
| /* this file behaves like a config.h, comes first */ |
| #include <platform/internal/CHIPDeviceLayerInternal.h> |
| |
| #include <ble/BleUUID.h> |
| #include <ble/CHIPBleServiceData.h> |
| #include <platform/internal/BLEManager.h> |
| |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| |
| /**** STM32 api files for ble and led support ****/ |
| #include "app_ble.h" |
| #include "app_matter.h" |
| #include "ble_gap_aci.h" |
| #include "cmsis_os.h" |
| |
| using namespace ::chip; |
| using namespace ::chip::Ble; |
| using namespace ::chip::System; |
| |
| namespace chip { |
| namespace DeviceLayer { |
| namespace Internal { |
| |
| namespace { |
| |
| // Advertising data content definitions |
| #define CHIP_ADV_DATA_TYPE_FLAGS 0x01 |
| #define CHIP_ADV_DATA_TYPE_UUID 0x03 |
| #define CHIP_ADV_DATA_FLAGS 0x06 |
| #define CHIP_ADV_DATA_TYPE_NAME 0x09 |
| #define CHIP_ADV_DATA_TYPE_SERVICE_DATA 0x16 |
| #define STM32_MTU 247 |
| #define CHIP_ADV_SHORT_UUID_LEN 2 |
| #define CONNECTION_CLOSE 0x13 |
| |
| // FreeeRTOS sw timer |
| TimerHandle_t sbleAdvTimeoutTimer; |
| |
| // Full service UUID - CHIP_BLE_SVC_ID - taken from BleUUID.h header |
| const uint8_t chipUUID_CHIPoBLE_Service[CHIP_ADV_SHORT_UUID_LEN] = { 0xFF, 0xF6 }; |
| |
| const ChipBleUUID chipUUID_CHIPoBLEChar_RX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F, |
| 0x9D, 0x11 } }; |
| |
| const ChipBleUUID chipUUID_CHIPoBLEChar_TX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F, |
| 0x9D, 0x12 } }; |
| |
| } // unnamed namespace |
| |
| BLEManagerImpl BLEManagerImpl::sInstance; |
| uint16_t gconnid = 0; |
| |
| CHIP_ERROR BLEManagerImpl::_Init() |
| { |
| CHIP_ERROR err; |
| |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Enabled; |
| mFlags.ClearAll().Set(Flags::kAdvertisingEnabled, CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART); |
| mFlags.Set(Flags::kFastAdvertisingEnabled); |
| mNumGAPCons = 0; |
| |
| for (int i = 0; i < kMaxConnections; i++) |
| { |
| mSubscribedConIds[i] = BLE_CONNECTION_UNINITIALIZED; |
| } |
| |
| // Initialize the CHIP BleLayer. |
| err = BleLayer::Init(this, this, &DeviceLayer::SystemLayer()); |
| SuccessOrExit(err); |
| |
| // Create FreeRTOS sw timer for BLE timeouts and interval change. |
| sbleAdvTimeoutTimer = xTimerCreate("BleAdvTimer", // Just a text name, not used by the RTOS kernel |
| pdMS_TO_TICKS(1), // == default timer period (mS) |
| false, // no timer reload (==one-shot) |
| (void *) this, // init timer id = ble obj context |
| BleAdvTimeoutHandler // timer callback handler |
| ); |
| VerifyOrExit(sbleAdvTimeoutTimer != NULL, err = CHIP_ERROR_INCORRECT_STATE); |
| |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| APP_MATTER_BLE_Set_Receive_Callback(HandleRXCharWrite); |
| APP_MATTER_BLE_Set_Connection_Callback(HandleGAPConnect); |
| APP_MATTER_BLE_Set_Disconnection_Callback(HandleGAPDisconnect); |
| APP_MATTER_BLE_Set_TXCharCCCDWrite_Callback(HandleTXCharCCCDWrite); |
| APP_MATTER_BLE_Set_Ack_After_Indicate_Callback(HandleAck); |
| |
| exit: |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::Init() complete"); |
| |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetCHIPoBLEServiceMode(CHIPoBLEServiceMode val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(val != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (val != mServiceMode) |
| { |
| mServiceMode = val; |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingEnabled(bool val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| ChipLogDetail(DeviceLayer, "CHIPoBLE advertising set to %s", val ? "on" : "off"); |
| if (mFlags.Has(Flags::kAdvertisingEnabled) != val) |
| { |
| mFlags.Set(Flags::kAdvertisingEnabled, val); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingMode(BLEAdvertisingMode mode) |
| { |
| switch (mode) |
| { |
| case BLEAdvertisingMode::kFastAdvertising: |
| mFlags.Set(Flags::kFastAdvertisingEnabled); |
| break; |
| case BLEAdvertisingMode::kSlowAdvertising: |
| mFlags.Clear(Flags::kFastAdvertisingEnabled); |
| break; |
| default: |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_GetDeviceName(char * buf, size_t bufSize) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetDeviceName(const char * devName) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (devName != nullptr && devName[0] != 0) |
| { |
| // TODO set device name |
| SuccessOrExit(err); |
| |
| mFlags.Set(Flags::kDeviceNameSet); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| void BLEManagerImpl::_OnPlatformEvent(const ChipDeviceEvent * event) |
| { |
| switch (event->Type) |
| { |
| // Platform specific events |
| case DeviceEventType::kCHIPoBLESubscribe: { |
| ChipDeviceEvent connEstEvent; |
| HandleSubscribeReceived(event->CHIPoBLESubscribe.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| connEstEvent.Type = DeviceEventType::kCHIPoBLEConnectionEstablished; |
| PlatformMgr().PostEventOrDie(&connEstEvent); |
| } |
| break; |
| |
| case DeviceEventType::kCHIPoBLEUnsubscribe: { |
| HandleUnsubscribeReceived(event->CHIPoBLEUnsubscribe.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| } |
| break; |
| |
| case DeviceEventType::kCHIPoBLEWriteReceived: { |
| HandleWriteReceived(event->CHIPoBLEWriteReceived.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_RX, |
| PacketBufferHandle::Adopt(event->CHIPoBLEWriteReceived.Data)); |
| } |
| break; |
| |
| case DeviceEventType::kCHIPoBLEConnectionError: { |
| HandleConnectionError(event->CHIPoBLEConnectionError.ConId, event->CHIPoBLEConnectionError.Reason); |
| } |
| break; |
| |
| // Generic CHIP events |
| case DeviceEventType::kServiceProvisioningChange: |
| // Force the advertising state to be refreshed to reflect new provisioning state. |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| break; |
| |
| case DeviceEventType::kCHIPoBLEIndicateConfirm: { |
| HandleIndicationConfirmation(event->CHIPoBLEIndicateConfirm.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| } |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| bool BLEManagerImpl::SubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::SubscribeCharacteristic() not supported"); |
| return false; |
| } |
| |
| bool BLEManagerImpl::UnsubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::UnsubscribeCharacteristic() not supported"); |
| return false; |
| } |
| |
| bool BLEManagerImpl::CloseConnection(BLE_CONNECTION_OBJECT conId) |
| { |
| CHIP_ERROR err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| |
| ChipLogProgress(DeviceLayer, "Closing BLE GATT connection con %u", *(uint16_t *) conId); |
| // aci_gap_terminate(gconnid, CONNECTION_CLOSE); |
| return (err == CHIP_NO_ERROR); |
| } |
| |
| uint16_t BLEManagerImpl::GetMTU(BLE_CONNECTION_OBJECT conId) const |
| { |
| uint16_t retVal = 0; |
| // TODO get MTU from stm32 api |
| retVal = STM32_MTU; |
| return retVal; |
| } |
| |
| bool BLEManagerImpl::SendIndication(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle data) |
| { |
| uint16_t dataLen = data->DataLength(); |
| |
| ChipLogDetail(DeviceLayer, "Sending notification for CHIPoBLE Client TX (con %u, len %u)", *(uint16_t *) conId, dataLen); |
| |
| APP_MATTER_Send_Notification(dataLen, data->Start()); |
| |
| return true; |
| } |
| |
| bool BLEManagerImpl::SendWriteRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendWriteRequest() not supported"); |
| return false; |
| } |
| |
| bool BLEManagerImpl::SendReadRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendReadRequest() not supported"); |
| return false; |
| } |
| |
| bool BLEManagerImpl::SendReadResponse(BLE_CONNECTION_OBJECT conId, BLE_READ_REQUEST_CONTEXT requestContext, |
| const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendReadResponse() not supported"); |
| return false; |
| } |
| |
| void BLEManagerImpl::NotifyChipConnectionClosed(BLE_CONNECTION_OBJECT conId) |
| { |
| CloseConnection(conId); |
| } |
| |
| void BLEManagerImpl::DriveBLEState(void) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| // Perform any initialization actions that must occur after the CHIP task is running. |
| if (!mFlags.Has(Flags::kAsyncInitCompleted)) |
| { |
| mFlags.Set(Flags::kAsyncInitCompleted); |
| ChipLogProgress(DeviceLayer, "kAsyncInitCompleted done"); |
| // If CHIP_DEVICE_CONFIG_CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED is enabled, |
| // disable CHIPoBLE advertising if the device is fully provisioned. |
| #if CHIP_DEVICE_CONFIG_CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED |
| if (ConfigurationMgr().IsFullyProvisioned()) |
| { |
| mFlags.Clear(Flags::kAdvertisingEnabled); |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising disabled because device is fully provisioned"); |
| } |
| #endif // CHIP_DEVICE_CONFIG_CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED |
| } |
| |
| // If the application has enabled CHIPoBLE and BLE advertising... |
| if (mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_Enabled && |
| mFlags.Has(Flags::kAdvertisingEnabled) |
| #if CHIP_DEVICE_CONFIG_CHIPOBLE_SINGLE_CONNECTION |
| // and no connections are active... |
| && (mNumGAPCons == 0) |
| #endif |
| ) |
| { |
| // Start/re-start BLE advertising if not already advertising, or if the |
| // advertising state of the underlying stack needs to be refreshed. |
| if (!mFlags.Has(Flags::kAdvertising) || mFlags.Has(Flags::kAdvertisingRefreshNeeded)) |
| { |
| mFlags.Clear(Flags::kAdvertisingRefreshNeeded); |
| err = StartAdvertising(); |
| SuccessOrExit(err); |
| } |
| } |
| |
| // Otherwise, stop advertising if currently active. |
| else if (mFlags.Has(Flags::kAdvertising)) |
| { |
| err = StopAdvertising(); |
| SuccessOrExit(err); |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %s", ErrorStr(err)); |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled; |
| } |
| } |
| |
| CHIP_ERROR BLEManagerImpl::ConfigureAdvertisingData(void) |
| { |
| ChipBLEDeviceIdentificationInfo mDeviceIdInfo; |
| CHIP_ERROR err; |
| uint8_t index = 0; |
| uint8_t deviceNameLength = 0; |
| uint8_t deviceIdInfoLength = 0; |
| int ret = 0; |
| |
| char deviceName[kMaxDeviceNameLength + 1]; |
| uint8_t advDataBuf[kMaxAdvertisementDataSetSize]; |
| uint8_t scanRespDataBuf[kMaxAdvertisementDataSetSize]; |
| |
| memset(advDataBuf, 0, kMaxAdvertisementDataSetSize); |
| memset(scanRespDataBuf, 0, kMaxAdvertisementDataSetSize); |
| |
| err = ConfigurationMgr().GetBLEDeviceIdentificationInfo(mDeviceIdInfo); |
| SuccessOrExit(err); |
| |
| if (!mFlags.Has(Flags::kDeviceNameSet)) |
| { |
| snprintf(deviceName, sizeof(deviceName), "%s%04" PRIX32, CHIP_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX, (uint32_t) 0); |
| deviceName[kMaxDeviceNameLength] = 0; |
| SuccessOrExit(err); |
| } |
| |
| deviceNameLength = static_cast<uint8_t>(strlen(deviceName)); |
| deviceIdInfoLength = sizeof(mDeviceIdInfo); |
| |
| // Check sizes |
| static_assert(sizeof(mDeviceIdInfo) + CHIP_ADV_SHORT_UUID_LEN + 1 <= UINT8_MAX, "Our length won't fit in a uint8_t"); |
| static_assert(2 + CHIP_ADV_SHORT_UUID_LEN + sizeof(mDeviceIdInfo) + 1 <= kMaxAdvertisementDataSetSize, |
| "Advertisement data buffer is not big enough"); |
| |
| // Fill in advertising data |
| index = 0; |
| advDataBuf[index++] = 0x02; // length |
| advDataBuf[index++] = CHIP_ADV_DATA_TYPE_FLAGS; // AD type : flags |
| advDataBuf[index++] = CHIP_ADV_DATA_FLAGS; // AD value |
| |
| advDataBuf[index++] = static_cast<uint8_t>(deviceIdInfoLength + CHIP_ADV_SHORT_UUID_LEN + 1); // AD length |
| advDataBuf[index++] = CHIP_ADV_DATA_TYPE_SERVICE_DATA; // AD type : Service Data |
| advDataBuf[index++] = chipUUID_CHIPoBLE_Service[1]; // AD value |
| advDataBuf[index++] = chipUUID_CHIPoBLE_Service[0]; |
| memcpy(&advDataBuf[index], (void *) &mDeviceIdInfo, deviceIdInfoLength); // AD value |
| |
| index = static_cast<uint8_t>(index + deviceIdInfoLength); |
| |
| ChipLogError(DeviceLayer, "state return update adv: %d", ret); |
| // Fill in scan response data |
| index = 0; |
| scanRespDataBuf[index++] = CHIP_ADV_SHORT_UUID_LEN + 1; // AD length |
| scanRespDataBuf[index++] = CHIP_ADV_DATA_TYPE_UUID; // AD type : uuid |
| scanRespDataBuf[index++] = chipUUID_CHIPoBLE_Service[1]; // AD value |
| scanRespDataBuf[index++] = chipUUID_CHIPoBLE_Service[0]; |
| |
| VerifyOrExit(index + (deviceNameLength + 2) <= kMaxAdvertisementDataSetSize, err = CHIP_ERROR_BUFFER_TOO_SMALL); |
| |
| scanRespDataBuf[index++] = static_cast<uint8_t>(deviceNameLength + 1); // length |
| scanRespDataBuf[index++] = CHIP_ADV_DATA_TYPE_NAME; // AD type : name |
| memcpy(&scanRespDataBuf[index], deviceName, deviceNameLength); // AD value |
| index = static_cast<uint8_t>(index + deviceNameLength); |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::StartAdvertising(void) |
| { |
| CHIP_ERROR err; |
| |
| // If already advertising, stop it, before changing values |
| if (mFlags.Has(Flags::kAdvertising)) |
| { |
| APP_BLE_Adv_Cancel(); // ST ble api |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "CHIPoBLE start advertising"); |
| } |
| |
| err = ConfigureAdvertisingData(); |
| SuccessOrExit(err); |
| |
| mFlags.Clear(Flags::kRestartAdvertising); |
| |
| if (mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| { |
| APP_BLE_Adv_Request(APP_BLE_FAST_ADV); |
| } |
| else |
| { |
| APP_BLE_Adv_Request(APP_BLE_LP_ADV); |
| } |
| |
| // Flag updated asynchronously by BLE host callback |
| mFlags.Set(Flags::kAdvertising); |
| |
| if (mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| { |
| StartBleAdvTimeoutTimer(CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::StopAdvertising(void) |
| { |
| CHIP_ERROR err; |
| |
| APP_BLE_Adv_Cancel(); // ST ble api |
| CancelBleAdvTimeoutTimer(); |
| // Transition to the not Advertising state... |
| if (mFlags.Has(Flags::kAdvertising)) |
| { |
| mFlags.Clear(Flags::kAdvertising); |
| mFlags.Set(Flags::kFastAdvertisingEnabled); |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising stopped"); |
| |
| // Post a CHIPoBLEAdvertisingChange(Stopped) event. |
| ChipDeviceEvent advChange; |
| advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange; |
| advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Stopped; |
| err = PlatformMgr().PostEvent(&advChange); |
| } |
| |
| return err; |
| } |
| |
| uint16_t BLEManagerImpl::_NumConnections(void) |
| { |
| uint16_t numCons = 0; |
| for (uint16_t i = 0; i < kMaxConnections; i++) |
| { |
| if (mSubscribedConIds[i] != BLE_CONNECTION_UNINITIALIZED) |
| { |
| numCons++; |
| } |
| } |
| return numCons; |
| } |
| |
| void BLEManagerImpl::DriveBLEState(intptr_t arg) |
| { |
| sInstance.DriveBLEState(); |
| } |
| |
| void BLEManagerImpl::bleConnect(void) |
| { |
| CHIP_ERROR err; |
| ChipLogProgress(DeviceLayer, "BLE GATT connection established "); |
| |
| mNumGAPCons++; |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| ChipDeviceEvent connectEvent; |
| connectEvent.Type = DeviceEventType::kCHIPoBLEConnectionEstablished; |
| err = PlatformMgr().PostEvent(&connectEvent); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| void BLEManagerImpl::bleDisconnect(uint16_t connid) |
| { |
| CHIP_ERROR err; |
| |
| ChipLogDetail(DeviceLayer, "BLE GATT connection closed (con %u)", connid); |
| ; |
| // Force a refresh of the advertising state. |
| if (mNumGAPCons > 0) |
| { |
| mNumGAPCons--; |
| } |
| |
| // If this was a CHIPoBLE connection, release the associated connection state record |
| // and post an event to deliver a connection error to the CHIPoBLE layer. |
| if (!BLEMgrImpl().IsSubscribed(connid)) |
| { |
| if (UnsetSubscribed(connid)) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kCHIPoBLEConnectionError; |
| event.CHIPoBLEConnectionError.ConId = connid; |
| PlatformMgr().PostEventOrDie(&event); |
| ChipLogDetail(DeviceLayer, "BLE unuset subscribed (con %u)", connid); |
| } |
| } |
| |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| ChipDeviceEvent disconnectEvent; |
| disconnectEvent.Type = DeviceEventType::kCHIPoBLEConnectionClosed; |
| err = PlatformMgr().PostEvent(&disconnectEvent); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| void BLEManagerImpl::HandleGAPConnect(void) |
| { |
| |
| ChipLogProgress(DeviceLayer, "Gap connect"); |
| sInstance.bleConnect(); |
| } |
| void BLEManagerImpl::HandleGAPDisconnect(uint16_t * connid) |
| { |
| ChipLogProgress(DeviceLayer, "Gap disconnect"); |
| sInstance.bleDisconnect(gconnid); |
| } |
| |
| void BLEManagerImpl::HandleRXCharWrite(BLE_Matter_RX * aMessage) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| ChipLogProgress(DeviceLayer, "Write request received for CHIPoBLE Client RX characteristic (con %u, len %u)", aMessage->connid, |
| aMessage->Length); |
| // update connid |
| gconnid = aMessage->connid; |
| |
| PacketBufferHandle buf = System::PacketBufferHandle::NewWithData(aMessage->Payload, aMessage->Length, 0, 0); |
| VerifyOrExit(!buf.IsNull(), err = CHIP_ERROR_NO_MEMORY); |
| // Post an event to the Chip queue to deliver the data into the Chip stack. |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kCHIPoBLEWriteReceived; |
| event.CHIPoBLEWriteReceived.ConId = aMessage->connid; |
| event.CHIPoBLEWriteReceived.Data = std::move(buf).UnsafeRelease(); |
| err = PlatformMgr().PostEvent(&event); |
| } |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "HandleRXCharWrite() failed: %s", ErrorStr(err)); |
| // TODO: fail connection??? |
| } |
| } |
| |
| void BLEManagerImpl::HandleTXCharCCCDWrite(BLE_Matter_TXCharCCCD * aMessage) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| bool notificationsEnabled; |
| |
| ChipLogProgress(DeviceLayer, "Write request received for CHIPoBLE TX characteristic CCCD (con %u, len %u)", aMessage->connid, |
| 0); |
| |
| // Determine if the client is enabling or disabling notifications |
| notificationsEnabled = (aMessage->notif != 0); |
| // If the client has requested to enable notifications |
| if (notificationsEnabled) |
| { |
| // Set subcription only the first time |
| if (!BLEMgrImpl().IsSubscribed(aMessage->connid)) // conid |
| { |
| // Record that notifications have been enabled for this connection. |
| err = BLEMgrImpl().SetSubscribed(aMessage->connid); |
| VerifyOrExit(err != CHIP_ERROR_NO_MEMORY, err = CHIP_NO_ERROR); |
| SuccessOrExit(err); |
| } |
| } |
| |
| else |
| { |
| // If notifications had previously been enabled for this connection, record that they are no longer enabled |
| BLEMgrImpl().UnsetSubscribed(aMessage->connid); |
| } |
| |
| // Post an event to the Chip queue to process either a CHIPoBLE Subscribe or Unsubscribe based on |
| // whether the client is enabling or disabling notifications |
| { |
| ChipDeviceEvent event; |
| event.Type = (notificationsEnabled) ? DeviceEventType::kCHIPoBLESubscribe : DeviceEventType::kCHIPoBLEUnsubscribe; |
| event.CHIPoBLESubscribe.ConId = aMessage->connid; |
| err = PlatformMgr().PostEvent(&event); |
| } |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE %s received", notificationsEnabled ? "subscribe" : "unsubscribe"); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "HandleTXCharCCCDWrite() failed: %s", ErrorStr(err)); |
| // TODO: fail connection??? |
| } |
| } |
| |
| void BLEManagerImpl::HandleAck(uint16_t * connid) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kCHIPoBLEIndicateConfirm; |
| event.CHIPoBLEIndicateConfirm.ConId = gconnid; |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| CHIP_ERROR BLEManagerImpl::SetSubscribed(uint16_t conId) |
| { |
| uint16_t freeIndex = kMaxConnections; |
| |
| for (uint16_t i = 0; i < kMaxConnections; i++) |
| { |
| if (mSubscribedConIds[i] == conId) |
| { |
| return CHIP_NO_ERROR; |
| } |
| else if (mSubscribedConIds[i] == BLE_CONNECTION_UNINITIALIZED && i < freeIndex) |
| { |
| freeIndex = i; |
| } |
| } |
| |
| if (freeIndex < kMaxConnections) |
| { |
| mSubscribedConIds[freeIndex] = conId; |
| return CHIP_NO_ERROR; |
| } |
| else |
| { |
| return CHIP_ERROR_NO_MEMORY; |
| } |
| } |
| |
| bool BLEManagerImpl::UnsetSubscribed(uint16_t conId) |
| { |
| for (uint16_t i = 0; i < kMaxConnections; i++) |
| { |
| if (mSubscribedConIds[i] == conId) |
| { |
| mSubscribedConIds[i] = BLE_CONNECTION_UNINITIALIZED; |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool BLEManagerImpl::IsSubscribed(uint16_t conId) |
| { |
| if (conId != BLE_CONNECTION_UNINITIALIZED) |
| { |
| for (uint16_t i = 0; i < kMaxConnections; i++) |
| { |
| if (mSubscribedConIds[i] == conId) |
| { |
| return true; |
| } |
| } |
| } |
| return false; |
| } |
| |
| void BLEManagerImpl::BleAdvTimeoutHandler(TimerHandle_t xTimer) |
| { |
| if (BLEMgrImpl().mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| { |
| ChipLogDetail(DeviceLayer, "bleAdv Timeout : Start slow advertisement"); |
| BLEMgr().SetAdvertisingMode(BLEAdvertisingMode::kSlowAdvertising); |
| } |
| } |
| |
| void BLEManagerImpl::CancelBleAdvTimeoutTimer(void) |
| { |
| if (xTimerStop(sbleAdvTimeoutTimer, 0) == pdFAIL) |
| { |
| ChipLogError(DeviceLayer, "Failed to stop BledAdv timeout timer"); |
| } |
| } |
| |
| void BLEManagerImpl::StartBleAdvTimeoutTimer(uint32_t aTimeoutInMs) |
| { |
| if (xTimerIsTimerActive(sbleAdvTimeoutTimer)) |
| { |
| CancelBleAdvTimeoutTimer(); |
| } |
| |
| // timer is not active, change its period to required value (== restart). |
| // FreeRTOS- Block for a maximum of 100 ticks if the change period command |
| // cannot immediately be sent to the timer command queue. |
| if (xTimerChangePeriod(sbleAdvTimeoutTimer, pdMS_TO_TICKS(aTimeoutInMs), 100) != pdPASS) |
| { |
| ChipLogError(DeviceLayer, "Failed to start BledAdv timeout timer"); |
| } |
| } |
| |
| } // namespace Internal |
| } // namespace DeviceLayer |
| } // namespace chip |
