blob: 2dc4874d7a354985543548b4a08aaa6cc43baa00 [file] [log] [blame]
/*
*
* Copyright (c) 2020 Project CHIP Authors
* All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/******************************************************************************
See http://www.freertos.org/a00110.html for an explanation of the
definitions contained in this file.
******************************************************************************/
#pragma once
/*-----------------------------------------------------------
* Application specific definitions.
*
* These definitions should be adjusted for your particular hardware and
* application requirements.
*
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
* http://www.freertos.org/a00110.html
*----------------------------------------------------------*/
/* Constants related to the behaviour or the scheduler. */
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
#define configTICK_RATE_HZ ((TickType_t) 1000)
#define configUSE_PREEMPTION 1
#define configUSE_TIME_SLICING 0
#define configMAX_PRIORITIES (10UL)
#define configIDLE_SHOULD_YIELD 0
#define configUSE_16_BIT_TICKS 0 /* Only for 8 and 16-bit hardware. */
/* Constants used to specify if only static allocation is to be supported (in
which case a heap_n.c file is not required), only dynamic allocation is to be
supported, or if both static and dynamic allocation are supported. */
#define configSUPPORT_STATIC_ALLOCATION 1
#define configSUPPORT_DYNAMIC_ALLOCATION 1
/* Constants that describe the hardware and memory usage. */
#define configCPU_CLOCK_HZ ((unsigned long) 80000000)
/* Smallest stack size allowed in words */
#define configMINIMAL_STACK_SIZE ((unsigned short) 256) // changed from 128
#define configMAX_TASK_NAME_LEN (12)
#define configTOTAL_HEAP_SIZE ((size_t) (0x14000)) // inreased from 0xe000
/* Idle task stack size in words */
#define configIDLE_TASK_STACK_DEPTH (configMINIMAL_STACK_SIZE * 2)
/* Default stack size for TI-POSIX threads (in words) */
#define configPOSIX_STACK_SIZE ((unsigned short) 512) // changed from 256
/* Constants that build features in or out. */
#define configUSE_MUTEXES 1
#define configUSE_TICKLESS_IDLE 1
#define configUSE_APPLICATION_TASK_TAG 1 /* Need by POSIX/pthread */
#define configUSE_CO_ROUTINES 0
#define configUSE_COUNTING_SEMAPHORES 1
#define configUSE_RECURSIVE_MUTEXES 1
#define configUSE_QUEUE_SETS 0
#define configUSE_TASK_NOTIFICATIONS 1
/* Constants that define which hook (callback) functions should be used. */
#define configUSE_IDLE_HOOK 0
#define configUSE_TICK_HOOK 0
#define configUSE_MALLOC_FAILED_HOOK 0
/* Constants provided for debugging and optimisation assistance. */
#define configCHECK_FOR_STACK_OVERFLOW 2
#define configASSERT(x) \
if ((x) == 0) \
{ \
taskDISABLE_INTERRUPTS(); \
for (;;) \
; \
}
#define configQUEUE_REGISTRY_SIZE 0
/*
* Minimum number of full tick periods of idle time required to run Power
* sleep policy function.
*/
#define configEXPECTED_IDLE_TIME_BEFORE_SLEEP 5
/* Software timer definitions. */
#define configUSE_TIMERS 1
#define configTIMER_TASK_PRIORITY (6)
#define configTIMER_QUEUE_LENGTH (20)
/* Timer task stack size in words */
#define configTIMER_TASK_STACK_DEPTH (configMINIMAL_STACK_SIZE * 2)
#define configENABLE_BACKWARD_COMPATIBILITY 1
#if defined(__TI_COMPILER_VERSION__) || defined(__ti_version__)
#include <ti/posix/freertos/PTLS.h>
#define traceTASK_DELETE(pxTCB) PTLS_taskDeleteHook(pxTCB)
#elif defined(__IAR_SYSTEMS_ICC__)
#ifndef __IAR_SYSTEMS_ASM__
#include <ti/posix/freertos/Mtx.h>
#define traceTASK_DELETE(pxTCB) Mtx_taskDeleteHook(pxTCB)
#endif
#endif
/*
* Enable thread local storage
*
* Assign TLS array index ownership here to avoid collisions.
* TLS storage is needed to implement thread-safe errno with
* TI and IAR compilers. With GNU compiler, we enable newlib.
*/
#if defined(__TI_COMPILER_VERSION__) || defined(__ti_version__) || defined(__IAR_SYSTEMS_ICC__)
#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 1
#if defined(__TI_COMPILER_VERSION__) || defined(__ti_version__)
#define PTLS_TLS_INDEX 0 /* ti.posix.freertos.PTLS */
#elif defined(__IAR_SYSTEMS_ICC__)
#define MTX_TLS_INDEX 0 /* ti.posix.freertos.Mtx */
#endif
#elif defined(__GNUC__)
/* note: system locks required by newlib are not implemented */
#define configUSE_NEWLIB_REENTRANT 1
#endif
/*
* Set the following definitions to 1 to include the API function, or zero
* to exclude the API function. NOTE: Setting an INCLUDE_ parameter to 0 is only
* necessary if the linker does not automatically remove functions that are not
* referenced anyway.
*/
#define INCLUDE_vTaskPrioritySet 1
#define INCLUDE_uxTaskPriorityGet 1
#define INCLUDE_vTaskDelete 1
#define INCLUDE_vTaskCleanUpResources 0
#define INCLUDE_vTaskSuspend 1
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#define INCLUDE_uxTaskGetStackHighWaterMark 0
#define INCLUDE_xTaskGetIdleTaskHandle 0
#define INCLUDE_eTaskGetState 1
#define INCLUDE_xTaskResumeFromISR 0
#define INCLUDE_xTaskGetCurrentTaskHandle 1
#define INCLUDE_xTaskGetSchedulerState 0
#define INCLUDE_xSemaphoreGetMutexHolder 0
#define INCLUDE_xTimerPendFunctionCall 0
/* Cortex-M3/4 interrupt priority configuration follows...................... */
/* Use the system definition, if there is one. */
#ifdef __NVIC_PRIO_BITS
#define configPRIO_BITS __NVIC_PRIO_BITS
#else
#define configPRIO_BITS 3 /* 8 priority levels */
#endif
/* The lowest interrupt priority that can be used in a call to a "set priority"
function. */
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 0x07
/*
* The highest interrupt priority that can be used by any interrupt service
* routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL
* INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
* PRIORITY THAN THIS! (higher priorities are lower numeric values.
*/
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 1
/*
* Priority 7 (shifted 5 since only the top 3 bits are implemented).
* Priority 7 is the lowest priority.
*/
#define configKERNEL_INTERRUPT_PRIORITY (configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
/*
* Priority 1 (shifted 5 since only the top 3 bits are implemented).
* Priority 1 is the second highest priority.
* Priority 0 is the highest priority.
* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
* See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html.
*/
#define configMAX_SYSCALL_INTERRUPT_PRIORITY (configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
/* The trace facility is turned on to make some functions available for use in
CLI commands. */
#define configUSE_TRACE_FACILITY 1
/* Constants related to the generation of run time stats. */
#define configGENERATE_RUN_TIME_STATS 0
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS()
#define portGET_RUN_TIME_COUNTER_VALUE() 0
/*
* Runtime Object View is a Texas Instrument host tool that helps visualize
* the application. When enabled, the ISR stack will be initialized in the
* startup_<device>_<compiler>.c file to 0xa5a5a5a5. The stack peak can then
* be displayed in Runtime Object View.
*/
#define configENABLE_ISR_STACK_INIT 1