blob: aee9ec36a2b73af88f10d410fd5b7a1013edc78d [file] [log] [blame]
/*
*
* Copyright (c) 2020 Project CHIP Authors
* Copyright (c) 2018 Nest Labs, Inc.
* All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @file
* Platform-specific configuration overrides for CHIP on
* the STM32 platform.
*/
#pragma once
// ==================== General Platform Adaptations ====================
#define CHIP_CONFIG_ABORT() abort()
#define CHIP_CONFIG_ENABLE_TUNNELING 0
#define CHIP_CONFIG_MAX_TUNNELS 0
#define CHIP_CONFIG_ENABLE_SERVICE_DIRECTORY 0
#define CHIP_CONFIG_PERSISTED_STORAGE_KEY_TYPE uint16_t
#define CHIP_CONFIG_PERSISTED_STORAGE_ENC_MSG_CNTR_ID 1
#define CHIP_CONFIG_PERSISTED_STORAGE_MAX_KEY_LENGTH 2
#define CHIP_CONFIG_LIFETIIME_PERSISTED_COUNTER_KEY 0x01
#if CHIP_ENABLE_OPENTHREAD
#define CHIP_DEVICE_CONFIG_THREAD_FTD 0 // 0 = MTD
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD 1
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_SRP_CLIENT 1
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_DNS_CLIENT 1
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_COMMISSIONABLE_DISCOVERY 1
#endif
// ========== Platform-specific Configuration =========
// These are configuration options that are unique to the platform.
// These can be overridden by the application as needed.
// ...
// ========== Platform-specific Configuration Overrides =========
#define CHIP_DEVICE_CONFIG_CHIP_TASK_NAME "STM32WB TASK"
#define CHIP_DEVICE_CONFIG_CHIP_TASK_STACK_SIZE (8 * 1024)
/**
* CHIP_DEVICE_CONFIG_CHIP_TASK_PRIORITY
*
* The priority of the chip task.
*/
#define CHIP_DEVICE_CONFIG_CHIP_TASK_PRIORITY 24
#define CHIP_DEVICE_CONFIG_THREAD_TASK_STACK_SIZE (4 * 1024)
/**
* CHIP_DEVICE_CONFIG_THREAD_TASK_PRIORITY
*
* The priority of the OpenThread task.
*/
#define CHIP_DEVICE_CONFIG_THREAD_TASK_PRIORITY 24
#define CHIP_DEVICE_CONFIG_MAX_EVENT_QUEUE_SIZE 25
/**
* CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE
*
* Reduce packet buffer pool size to 8 (default 15) to reduce ram consumption
*/
#define CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE 8
#define CHIP_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY 0
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY 0
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL 0
// Per 5.2.5.2. Commencement Section of CHIP spec, BLE advertisement is
// disabled for Locks and Barrier Access Devices.
#define CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART 0
#define CHIP_DEVICE_CONFIG_ENABLE_PAIRING_AUTOSTART 0
/**
* CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME
*
* The amount of time in miliseconds after which BLE advertisement should be switched from the fast
* advertising to the slow advertising, counting from the moment of advertisement commencement.
*
* Defaults to 30000 (30 seconds).
*/
#ifndef CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME
#define CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME 30000
#endif
// ========== Platform-specific Cluster Overrides =========
#define CHIP_CLUSTER_NETWORK_COMMISSIONING_MAX_NETWORKS 1
// MATTER_DM_OTA_SOFTWARE_UPDATE_PROVIDER_CLUSTER_SERVER_ENDPOINT_COUNT is only defined if the
// cluster is actually enabled in the ZAP config. To allow operation in setups
#define MATTER_DM_OTA_SOFTWARE_UPDATE_PROVIDER_CLUSTER_SERVER_ENDPOINT_COUNT 1
/**
* CHIP_DEVICE_CONFIG_ENABLE_CHIP_TIME_SERVICE_TIME_SYNC
*
* Enables synchronizing the device's real time clock with a remote Chip Time service
* using the Chip Time Sync protocol.
*/
#define CHIP_DEVICE_CONFIG_ENABLE_CHIP_TIME_SERVICE_TIME_SYNC 0
#define CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_TIME 1
/**
* @def CHIP_CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL
*
* @brief
* Active retransmit interval, or time to wait before retransmission after
* subsequent failures in milliseconds.
*
* This is the default value, that might be adjusted by end device depending on its
* needs (e.g. sleeping period) using Service Discovery TXT record CRA key.
*
*/
#define CHIP_CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL (2000_ms32)
#define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1
/**
* CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
*
* Enable support for Chip-over-BLE (CHIPoBLE).
*/
#define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 1
#define CHIP_CONFIG_ENABLE_SESSION_RESUMPTION 1
#define CHIP_CONFIG_MEMORY_MGMT_PLATFORM 1
#define CHIP_CONFIG_MEMORY_MGMT_MALLOC 0