src/app/tests/suites/certification/Test_TC_SWTCH_3_2.yaml

# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name: 73.3.3. [TC-SWTCH-3.2] Primary functionality with client as DUT

PICS:
    - SWTCH.C

config:
    nodeId: 0x12344321
    cluster: "Basic"
    endpoint: 0

tests:
    - label: "TH checks consistency of PICS flags"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label: "TH checks consistency of PICS flags"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label: "TH checks consistency of PICS flags"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label: "TH checks consistency of PICS flags"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label: "TH checks consistency of PICS flags"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label: "TH checks consistency of PICS flags"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label: "TH checks consistency of PICS flags"
      verification: |
          no messages needed, TH checks consistency of PICS flags
      disabled: true

    - label:
          "Commission DUT to TH. Use client mechanism to set it up so switch
          state can be observed (e.g. UI shows state of switch) and/or other
          device is controlled (e.g. light on same fabric gets controlled by the
          switch  TH has to simulate that light). While commissioning and
          configuring, TH records and reacts to the messages relating to the
          switch functionality detailed in the steps below. The order of the
          messages received may be different from the order of the sub-steps
          1b..1d below."
      verification: |

      disabled: true

    - label:
          "TH simulates operation of the switch by changing state (attribute
          CurrentPosition) from 0 to 1 and back every 10 seconds"
      verification: |
          add messages for this exchange: DUT needs to read the attribute, TH provides value of simulated switch
          DUT also shows results in UI or via controlled device
      disabled: true

    - label:
          "TH simulates operation of the switch by changing state (attribute
          CurrentPosition) from 0 to 1 and back every 10 seconds, and sending
          the event SwitchLatched (with field NewPosition reflecting the new
          state) on every change"
      verification: |
          TH sends event messages, DUT consumes them, DUT shows results in UI or via controlled device
      disabled: true

    - label:
          "Commission DUT to TH. Use client mechanism to set it up so switch
          state can be observed (e.g. UI shows state of switch) and/or other
          device is controlled (e.g. light on same fabric gets controlled by the
          switch  TH has to simulate that light). While commissioning and
          configuring, TH records and reacts to the messages relating to the
          switch functionality detailed in the steps below. The order of the
          messages received may be different from the order of the sub-steps
          3b..3d below."
      verification: |

      disabled: true

    - label:
          "TH simulates operation of the switch by repeating these steps (over a
          1 minute period) * change state (attribute CurrentPosition) from 0 to
          1 * wait 0.2 seconds * change state (attribute CurrentPosition) from 1
          to 0 * wait 10 seconds"
      verification: |
          add messages for this exchange: DUT needs to read the attribute, TH provides value of simulated switch
          DUT also shows results in UI or via controlled device
      disabled: true

    - label:
          "TH simulates operation of the switch by repeating these steps (over a
          1 minute period) change state (attribute CurrentPosition) from 0 to 1,
          and send the event InitialPress (with field NewPosition=1)  * wait 0.2
          seconds * change state (attribute CurrentPosition) from 1 to 0, and
          send the event ShortRelease (with field PreviousPosition=1) * wait 10
          seconds"
      verification: |
          TH sends event messages, DUT consumes them, DUT shows results in UI or via controlled device
      disabled: true

    - label:
          "TH simulates operation of the switch by repeating these steps (over a
          1 minute period) change state (field CurrentPosition) from 0 to 1, and
          send the event InitialPress (with field NewPosition=1) wait 0.75
          seconds * send the event LongPress (field NewPosition=1) wait 2
          seconds * change state (field CurrentPosition) from 1 to 0, and send
          the event LongRelease (with field PreviousPosition=1)* wait 8 seconds"
      verification: |
          TH sends event messages, DUT consumes them, DUT shows results in UI or via controlled device
      disabled: true