examples/lock-app/nrfconnect/main/AppTask.cpp - third_party/github/project-chip/connectedhomeip - Git at Google

 /*
  *
  *    Copyright (c) 2020 Project CHIP Authors
  *    All rights reserved.
  *
  *    Licensed under the Apache License, Version 2.0 (the "License");
  *    you may not use this file except in compliance with the License.
  *    You may obtain a copy of the License at
  *
  *        http://www.apache.org/licenses/LICENSE-2.0
  *
  *    Unless required by applicable law or agreed to in writing, software
  *    distributed under the License is distributed on an "AS IS" BASIS,
  *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *    See the License for the specific language governing permissions and
  *    limitations under the License.
  */

 #include "AppTask.h"
 #include "AppConfig.h"
 #include "BoltLockManager.h"
 #include "LEDWidget.h"

 #include <DeviceInfoProviderImpl.h>
 #include <app-common/zap-generated/attribute-id.h>
 #include <app-common/zap-generated/attribute-type.h>
 #include <app-common/zap-generated/attributes/Accessors.h>
 #include <app-common/zap-generated/cluster-id.h>
 #include <app/clusters/door-lock-server/door-lock-server.h>
 #include <app/clusters/ota-requestor/OTATestEventTriggerDelegate.h>
 #include <app/server/OnboardingCodesUtil.h>
 #include <app/server/Server.h>
 #include <credentials/DeviceAttestationCredsProvider.h>
 #include <credentials/examples/DeviceAttestationCredsExample.h>
 #include <lib/support/CHIPMem.h>
 #include <lib/support/CodeUtils.h>
 #include <lib/support/ErrorStr.h>
 #include <system/SystemClock.h>

 #if CONFIG_CHIP_OTA_REQUESTOR
 #include "OTAUtil.h"
 #endif

 #include <dk_buttons_and_leds.h>
 #include <zephyr/logging/log.h>
 #include <zephyr/zephyr.h>

 using namespace ::chip;
 using namespace ::chip::app;
 using namespace ::chip::app::Clusters::DoorLock;
 using namespace ::chip::Credentials;
 using namespace ::chip::DeviceLayer;

 #define FACTORY_RESET_TRIGGER_TIMEOUT 3000
 #define FACTORY_RESET_CANCEL_WINDOW_TIMEOUT 3000
 #define APP_EVENT_QUEUE_SIZE 10
 #define BUTTON_PUSH_EVENT 1
 #define BUTTON_RELEASE_EVENT 0

 namespace {
 constexpr EndpointId kLockEndpointId = 1;

 // NOTE! This key is for test/certification only and should not be available in production devices!
 // If CONFIG_CHIP_FACTORY_DATA is enabled, this value is read from the factory data.
 uint8_t sTestEventTriggerEnableKey[TestEventTriggerDelegate::kEnableKeyLength] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
                                                                                    0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff };

 LOG_MODULE_DECLARE(app, CONFIG_MATTER_LOG_LEVEL);
 K_MSGQ_DEFINE(sAppEventQueue, sizeof(AppEvent), APP_EVENT_QUEUE_SIZE, alignof(AppEvent));
 k_timer sFunctionTimer;

 LEDWidget sStatusLED;
 LEDWidget sLockLED;
 LEDWidget sUnusedLED;
 LEDWidget sUnusedLED_1;

 bool sIsThreadProvisioned = false;
 bool sIsThreadEnabled     = false;
 bool sHaveBLEConnections  = false;

 chip::DeviceLayer::DeviceInfoProviderImpl gExampleDeviceInfoProvider;

 } // namespace

 AppTask AppTask::sAppTask;

 CHIP_ERROR AppTask::Init()
 {
     // Initialize CHIP stack
     LOG_INF("Init CHIP stack");

     CHIP_ERROR err = chip::Platform::MemoryInit();
     if (err != CHIP_NO_ERROR)
     {
         LOG_ERR("Platform::MemoryInit() failed");
         return err;
     }

     err = PlatformMgr().InitChipStack();
     if (err != CHIP_NO_ERROR)
     {
         LOG_ERR("PlatformMgr().InitChipStack() failed");
         return err;
     }

 #if defined(CONFIG_NET_L2_OPENTHREAD)
     err = ThreadStackMgr().InitThreadStack();
     if (err != CHIP_NO_ERROR)
     {
         LOG_ERR("ThreadStackMgr().InitThreadStack() failed");
         return err;
     }

 #ifdef CONFIG_OPENTHREAD_MTD_SED
     err = ConnectivityMgr().SetThreadDeviceType(ConnectivityManager::kThreadDeviceType_SleepyEndDevice);
 #else
     err = ConnectivityMgr().SetThreadDeviceType(ConnectivityManager::kThreadDeviceType_MinimalEndDevice);
 #endif
     if (err != CHIP_NO_ERROR)
     {
         LOG_ERR("ConnectivityMgr().SetThreadDeviceType() failed");
         return err;
     }
 #else
     return CHIP_ERROR_INTERNAL;
 #endif

     // Initialize LEDs
     LEDWidget::InitGpio();
     LEDWidget::SetStateUpdateCallback(LEDStateUpdateHandler);

     sStatusLED.Init(SYSTEM_STATE_LED);
     sLockLED.Init(LOCK_STATE_LED);
     sLockLED.Set(BoltLockMgr().IsLocked());

     sUnusedLED.Init(DK_LED3);
     sUnusedLED_1.Init(DK_LED4);

     UpdateStatusLED();

     BoltLockMgr().Init(LockStateChanged);

     // Initialize buttons
     int ret = dk_buttons_init(ButtonEventHandler);
     if (ret)
     {
         LOG_ERR("dk_buttons_init() failed");
         return chip::System::MapErrorZephyr(ret);
     }

     // Initialize function button timer
     k_timer_init(&sFunctionTimer, &AppTask::TimerEventHandler, nullptr);
     k_timer_user_data_set(&sFunctionTimer, this);

 #ifdef CONFIG_MCUMGR_SMP_BT
     // Initialize DFU over SMP
     GetDFUOverSMP().Init(RequestSMPAdvertisingStart);
     GetDFUOverSMP().ConfirmNewImage();
 #endif

     // Initialize CHIP server
 #if CONFIG_CHIP_FACTORY_DATA
     ReturnErrorOnFailure(mFactoryDataProvider.Init());
     SetDeviceInstanceInfoProvider(&mFactoryDataProvider);
     SetDeviceAttestationCredentialsProvider(&mFactoryDataProvider);
     SetCommissionableDataProvider(&mFactoryDataProvider);
     // Read EnableKey from the factory data.
     MutableByteSpan enableKey(sTestEventTriggerEnableKey);
     err = mFactoryDataProvider.GetEnableKey(enableKey);
     if (err != CHIP_NO_ERROR)
     {
         LOG_ERR("mFactoryDataProvider.GetEnableKey() failed. Could not delegate a test event trigger");
         memset(sTestEventTriggerEnableKey, 0, sizeof(sTestEventTriggerEnableKey));
     }
 #else
     SetDeviceAttestationCredentialsProvider(Examples::GetExampleDACProvider());
 #endif

     static CommonCaseDeviceServerInitParams initParams;
     static OTATestEventTriggerDelegate testEventTriggerDelegate{ ByteSpan(sTestEventTriggerEnableKey) };
     (void) initParams.InitializeStaticResourcesBeforeServerInit();
     initParams.testEventTriggerDelegate = &testEventTriggerDelegate;
     ReturnErrorOnFailure(chip::Server::GetInstance().Init(initParams));

     gExampleDeviceInfoProvider.SetStorageDelegate(&Server::GetInstance().GetPersistentStorage());
     chip::DeviceLayer::SetDeviceInfoProvider(&gExampleDeviceInfoProvider);
     ConfigurationMgr().LogDeviceConfig();
     PrintOnboardingCodes(chip::RendezvousInformationFlags(chip::RendezvousInformationFlag::kBLE));

     // Add CHIP event handler and start CHIP thread.
     // Note that all the initialization code should happen prior to this point to avoid data races
     // between the main and the CHIP threads.
     PlatformMgr().AddEventHandler(ChipEventHandler, 0);

     // Disable auto-relock time feature.
     DoorLockServer::Instance().SetAutoRelockTime(kLockEndpointId, 0);

     err = PlatformMgr().StartEventLoopTask();
     if (err != CHIP_NO_ERROR)
     {
         LOG_ERR("PlatformMgr().StartEventLoopTask() failed");
     }

     return err;
 }

 CHIP_ERROR AppTask::StartApp()
 {
     ReturnErrorOnFailure(Init());

     AppEvent event = {};

     while (true)
     {
         k_msgq_get(&sAppEventQueue, &event, K_FOREVER);
         DispatchEvent(&event);
     }

     return CHIP_NO_ERROR;
 }

 void AppTask::LockActionEventHandler(AppEvent * aEvent)
 {
     if (BoltLockMgr().IsLocked())
     {
         BoltLockMgr().Unlock(BoltLockManager::OperationSource::kButton);
     }
     else
     {
         BoltLockMgr().Lock(BoltLockManager::OperationSource::kButton);
     }
 }

 void AppTask::ButtonEventHandler(uint32_t button_state, uint32_t has_changed)
 {
     AppEvent button_event;
     button_event.Type = AppEvent::kEventType_Button;

     if (LOCK_BUTTON_MASK & button_state & has_changed)
     {
         button_event.ButtonEvent.PinNo  = LOCK_BUTTON;
         button_event.ButtonEvent.Action = BUTTON_PUSH_EVENT;
         button_event.Handler            = LockActionEventHandler;
         sAppTask.PostEvent(&button_event);
     }

     if (FUNCTION_BUTTON_MASK & has_changed)
     {
         button_event.ButtonEvent.PinNo  = FUNCTION_BUTTON;
         button_event.ButtonEvent.Action = (FUNCTION_BUTTON_MASK & button_state) ? BUTTON_PUSH_EVENT : BUTTON_RELEASE_EVENT;
         button_event.Handler            = FunctionHandler;
         sAppTask.PostEvent(&button_event);
     }

     if (BLE_ADVERTISEMENT_START_BUTTON_MASK & button_state & has_changed)
     {
         button_event.ButtonEvent.PinNo  = BLE_ADVERTISEMENT_START_BUTTON;
         button_event.ButtonEvent.Action = BUTTON_PUSH_EVENT;
         button_event.Handler            = StartBLEAdvertisementHandler;
         sAppTask.PostEvent(&button_event);
     }
 }

 void AppTask::TimerEventHandler(k_timer * timer)
 {
     AppEvent event;
     event.Type               = AppEvent::kEventType_Timer;
     event.TimerEvent.Context = k_timer_user_data_get(timer);
     event.Handler            = FunctionTimerEventHandler;
     sAppTask.PostEvent(&event);
 }

 void AppTask::FunctionTimerEventHandler(AppEvent * aEvent)
 {
     if (aEvent->Type != AppEvent::kEventType_Timer)
         return;

     // If we reached here, the button was held past FACTORY_RESET_TRIGGER_TIMEOUT, initiate factory reset
     if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_SoftwareUpdate)
     {
         LOG_INF("Factory Reset Triggered. Release button within %ums to cancel.", FACTORY_RESET_TRIGGER_TIMEOUT);

         // Start timer for FACTORY_RESET_CANCEL_WINDOW_TIMEOUT to allow user to cancel, if required.
         sAppTask.StartTimer(FACTORY_RESET_CANCEL_WINDOW_TIMEOUT);
         sAppTask.mFunction = kFunction_FactoryReset;

 #ifdef CONFIG_STATE_LEDS
         // Turn off all LEDs before starting blink to make sure blink is co-ordinated.
         sStatusLED.Set(false);
         sLockLED.Set(false);
         sUnusedLED_1.Set(false);
         sUnusedLED.Set(false);

         sStatusLED.Blink(500);
         sLockLED.Blink(500);
         sUnusedLED.Blink(500);
         sUnusedLED_1.Blink(500);
 #endif
     }
     else if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_FactoryReset)
     {
         // Actually trigger Factory Reset
         sAppTask.mFunction = kFunction_NoneSelected;

         chip::Server::GetInstance().ScheduleFactoryReset();
     }
 }

 #ifdef CONFIG_MCUMGR_SMP_BT
 void AppTask::RequestSMPAdvertisingStart(void)
 {
     AppEvent event;
     event.Type    = AppEvent::kEventType_StartSMPAdvertising;
     event.Handler = [](AppEvent *) { GetDFUOverSMP().StartBLEAdvertising(); };
     sAppTask.PostEvent(&event);
 }
 #endif

 void AppTask::FunctionHandler(AppEvent * aEvent)
 {
     if (aEvent->ButtonEvent.PinNo != FUNCTION_BUTTON)
         return;

     // To trigger software update: press the FUNCTION_BUTTON button briefly (< FACTORY_RESET_TRIGGER_TIMEOUT)
     // To initiate factory reset: press the FUNCTION_BUTTON for FACTORY_RESET_TRIGGER_TIMEOUT + FACTORY_RESET_CANCEL_WINDOW_TIMEOUT
     // All LEDs start blinking after FACTORY_RESET_TRIGGER_TIMEOUT to signal factory reset has been initiated.
     // To cancel factory reset: release the FUNCTION_BUTTON once all LEDs start blinking within the
     // FACTORY_RESET_CANCEL_WINDOW_TIMEOUT
     if (aEvent->ButtonEvent.Action == BUTTON_PUSH_EVENT)
     {
         if (!sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_NoneSelected)
         {
             sAppTask.StartTimer(FACTORY_RESET_TRIGGER_TIMEOUT);

             sAppTask.mFunction = kFunction_SoftwareUpdate;
         }
     }
     else
     {
         // If the button was released before factory reset got initiated, trigger a software update.
         if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_SoftwareUpdate)
         {
             sAppTask.CancelTimer();
             sAppTask.mFunction = kFunction_NoneSelected;

 #ifdef CONFIG_MCUMGR_SMP_BT
             GetDFUOverSMP().StartServer();
 #else
             LOG_INF("Software update is disabled");
 #endif
         }
         else if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_FactoryReset)
         {
             sUnusedLED.Set(false);
             sUnusedLED_1.Set(false);

             // Set lock status LED back to show state of lock.
             sLockLED.Set(BoltLockMgr().IsLocked());

             UpdateStatusLED();
             sAppTask.CancelTimer();

             // Change the function to none selected since factory reset has been canceled.
             sAppTask.mFunction = kFunction_NoneSelected;

             LOG_INF("Factory Reset has been Canceled");
         }
     }
 }

 void AppTask::StartBLEAdvertisementHandler(AppEvent *)
 {
     if (Server::GetInstance().GetFabricTable().FabricCount() != 0)
     {
         LOG_INF("Matter service BLE advertising not started - device is already commissioned");
         return;
     }

     if (ConnectivityMgr().IsBLEAdvertisingEnabled())
     {
         LOG_INF("BLE advertising is already enabled");
         return;
     }

     if (Server::GetInstance().GetCommissioningWindowManager().OpenBasicCommissioningWindow() != CHIP_NO_ERROR)
     {
         LOG_ERR("OpenBasicCommissioningWindow() failed");
     }
 }

 void AppTask::UpdateLedStateEventHandler(AppEvent * aEvent)
 {
     if (aEvent->Type == AppEvent::kEventType_UpdateLedState)
     {
         aEvent->UpdateLedStateEvent.LedWidget->UpdateState();
     }
 }

 void AppTask::LEDStateUpdateHandler(LEDWidget & ledWidget)
 {
     AppEvent event;
     event.Type                          = AppEvent::kEventType_UpdateLedState;
     event.Handler                       = UpdateLedStateEventHandler;
     event.UpdateLedStateEvent.LedWidget = &ledWidget;
     sAppTask.PostEvent(&event);
 }

 void AppTask::UpdateStatusLED()
 {
 #ifdef CONFIG_STATE_LEDS
     /* Update the status LED.
      *
      * If thread and service provisioned, keep the LED On constantly.
      *
      * If the system has ble connection(s) uptill the stage above, THEN blink the LED at an even
      * rate of 100ms.
      *
      * Otherwise, blink the LED On for a very short time. */
     if (sIsThreadProvisioned && sIsThreadEnabled)
     {
         sStatusLED.Set(true);
     }
     else if (sHaveBLEConnections)
     {
         sStatusLED.Blink(100, 100);
     }
     else
     {
         sStatusLED.Blink(50, 950);
     }
 #endif
 }

 void AppTask::ChipEventHandler(const ChipDeviceEvent * event, intptr_t /* arg */)
 {
     switch (event->Type)
     {
     case DeviceEventType::kCHIPoBLEAdvertisingChange:
 #ifdef CONFIG_CHIP_NFC_COMMISSIONING
         if (event->CHIPoBLEAdvertisingChange.Result == kActivity_Started)
         {
             if (NFCMgr().IsTagEmulationStarted())
             {
                 LOG_INF("NFC Tag emulation is already started");
             }
             else
             {
                 ShareQRCodeOverNFC(chip::RendezvousInformationFlags(chip::RendezvousInformationFlag::kBLE));
             }
         }
         else if (event->CHIPoBLEAdvertisingChange.Result == kActivity_Stopped)
         {
             NFCMgr().StopTagEmulation();
         }
 #endif
         sHaveBLEConnections = ConnectivityMgr().NumBLEConnections() != 0;
         UpdateStatusLED();
         break;
     case DeviceEventType::kThreadStateChange:
         sIsThreadProvisioned = ConnectivityMgr().IsThreadProvisioned();
         sIsThreadEnabled     = ConnectivityMgr().IsThreadEnabled();
         UpdateStatusLED();
         break;
     case DeviceEventType::kDnssdPlatformInitialized:
 #if CONFIG_CHIP_OTA_REQUESTOR
         InitBasicOTARequestor();
 #endif
         break;
     default:
         break;
     }
 }

 void AppTask::CancelTimer()
 {
     k_timer_stop(&sFunctionTimer);
     mFunctionTimerActive = false;
 }

 void AppTask::StartTimer(uint32_t aTimeoutInMs)
 {
     k_timer_start(&sFunctionTimer, K_MSEC(aTimeoutInMs), K_NO_WAIT);
     mFunctionTimerActive = true;
 }

 void AppTask::LockStateChanged(BoltLockManager::State state, BoltLockManager::OperationSource source)
 {
     switch (state)
     {
     case BoltLockManager::State::kLockingInitiated:
         LOG_INF("Lock action initiated");
         sLockLED.Blink(50, 50);
         break;
     case BoltLockManager::State::kLockingCompleted:
         LOG_INF("Lock action completed");
         sLockLED.Set(true);
         break;
     case BoltLockManager::State::kUnlockingInitiated:
         LOG_INF("Unlock action initiated");
         sLockLED.Blink(50, 50);
         break;
     case BoltLockManager::State::kUnlockingCompleted:
         LOG_INF("Unlock action completed");
         sLockLED.Set(false);
         break;
     }

     sAppTask.UpdateClusterState(state, source);
 }

 void AppTask::PostEvent(AppEvent * aEvent)
 {
     if (k_msgq_put(&sAppEventQueue, aEvent, K_NO_WAIT))
     {
         LOG_INF("Failed to post event to app task event queue");
     }
 }

 void AppTask::DispatchEvent(AppEvent * aEvent)
 {
     if (aEvent->Handler)
     {
         aEvent->Handler(aEvent);
     }
     else
     {
         LOG_INF("Event received with no handler. Dropping event.");
     }
 }

 void AppTask::UpdateClusterState(BoltLockManager::State state, BoltLockManager::OperationSource source)
 {
     DlLockState newLockState;

     switch (state)
     {
     case BoltLockManager::State::kLockingCompleted:
         newLockState = DlLockState::kLocked;
         break;
     case BoltLockManager::State::kUnlockingCompleted:
         newLockState = DlLockState::kUnlocked;
         break;
     default:
         newLockState = DlLockState::kNotFullyLocked;
         break;
     }

     SystemLayer().ScheduleLambda([newLockState, source] {
         chip::app::DataModel::Nullable<chip::app::Clusters::DoorLock::DlLockState> currentLockState;
         chip::app::Clusters::DoorLock::Attributes::LockState::Get(kLockEndpointId, currentLockState);

         if (currentLockState.IsNull())
         {
             // Initialize lock state with start value, but not invoke lock/unlock.
             chip::app::Clusters::DoorLock::Attributes::LockState::Set(kLockEndpointId, newLockState);
         }
         else
         {
             LOG_INF("Updating LockState attribute");

             if (!DoorLockServer::Instance().SetLockState(kLockEndpointId, newLockState, source))
             {
                 LOG_ERR("Failed to update LockState attribute");
             }
         }
     });
 }
	/*
	*
	* Copyright (c) 2020 Project CHIP Authors
	* All rights reserved.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "AppTask.h"
	#include "AppConfig.h"
	#include "BoltLockManager.h"
	#include "LEDWidget.h"

	#include <DeviceInfoProviderImpl.h>
	#include <app-common/zap-generated/attribute-id.h>
	#include <app-common/zap-generated/attribute-type.h>
	#include <app-common/zap-generated/attributes/Accessors.h>
	#include <app-common/zap-generated/cluster-id.h>
	#include <app/clusters/door-lock-server/door-lock-server.h>
	#include <app/clusters/ota-requestor/OTATestEventTriggerDelegate.h>
	#include <app/server/OnboardingCodesUtil.h>
	#include <app/server/Server.h>
	#include <credentials/DeviceAttestationCredsProvider.h>
	#include <credentials/examples/DeviceAttestationCredsExample.h>
	#include <lib/support/CHIPMem.h>
	#include <lib/support/CodeUtils.h>
	#include <lib/support/ErrorStr.h>
	#include <system/SystemClock.h>

	#if CONFIG_CHIP_OTA_REQUESTOR
	#include "OTAUtil.h"
	#endif

	#include <dk_buttons_and_leds.h>
	#include <zephyr/logging/log.h>
	#include <zephyr/zephyr.h>

	using namespace ::chip;
	using namespace ::chip::app;
	using namespace ::chip::app::Clusters::DoorLock;
	using namespace ::chip::Credentials;
	using namespace ::chip::DeviceLayer;

	#define FACTORY_RESET_TRIGGER_TIMEOUT 3000
	#define FACTORY_RESET_CANCEL_WINDOW_TIMEOUT 3000
	#define APP_EVENT_QUEUE_SIZE 10
	#define BUTTON_PUSH_EVENT 1
	#define BUTTON_RELEASE_EVENT 0

	namespace {
	constexpr EndpointId kLockEndpointId = 1;

	// NOTE! This key is for test/certification only and should not be available in production devices!
	// If CONFIG_CHIP_FACTORY_DATA is enabled, this value is read from the factory data.
	uint8_t sTestEventTriggerEnableKey[TestEventTriggerDelegate::kEnableKeyLength] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff };

	LOG_MODULE_DECLARE(app, CONFIG_MATTER_LOG_LEVEL);
	K_MSGQ_DEFINE(sAppEventQueue, sizeof(AppEvent), APP_EVENT_QUEUE_SIZE, alignof(AppEvent));
	k_timer sFunctionTimer;

	LEDWidget sStatusLED;
	LEDWidget sLockLED;
	LEDWidget sUnusedLED;
	LEDWidget sUnusedLED_1;

	bool sIsThreadProvisioned = false;
	bool sIsThreadEnabled = false;
	bool sHaveBLEConnections = false;

	chip::DeviceLayer::DeviceInfoProviderImpl gExampleDeviceInfoProvider;

	} // namespace

	AppTask AppTask::sAppTask;

	CHIP_ERROR AppTask::Init()
	{
	// Initialize CHIP stack
	LOG_INF("Init CHIP stack");

	CHIP_ERROR err = chip::Platform::MemoryInit();
	if (err != CHIP_NO_ERROR)
	{
	LOG_ERR("Platform::MemoryInit() failed");
	return err;
	}

	err = PlatformMgr().InitChipStack();
	if (err != CHIP_NO_ERROR)
	{
	LOG_ERR("PlatformMgr().InitChipStack() failed");
	return err;
	}

	#if defined(CONFIG_NET_L2_OPENTHREAD)
	err = ThreadStackMgr().InitThreadStack();
	if (err != CHIP_NO_ERROR)
	{
	LOG_ERR("ThreadStackMgr().InitThreadStack() failed");
	return err;
	}

	#ifdef CONFIG_OPENTHREAD_MTD_SED
	err = ConnectivityMgr().SetThreadDeviceType(ConnectivityManager::kThreadDeviceType_SleepyEndDevice);
	#else
	err = ConnectivityMgr().SetThreadDeviceType(ConnectivityManager::kThreadDeviceType_MinimalEndDevice);
	#endif
	if (err != CHIP_NO_ERROR)
	{
	LOG_ERR("ConnectivityMgr().SetThreadDeviceType() failed");
	return err;
	}
	#else
	return CHIP_ERROR_INTERNAL;
	#endif

	// Initialize LEDs
	LEDWidget::InitGpio();
	LEDWidget::SetStateUpdateCallback(LEDStateUpdateHandler);

	sStatusLED.Init(SYSTEM_STATE_LED);
	sLockLED.Init(LOCK_STATE_LED);
	sLockLED.Set(BoltLockMgr().IsLocked());

	sUnusedLED.Init(DK_LED3);
	sUnusedLED_1.Init(DK_LED4);

	UpdateStatusLED();

	BoltLockMgr().Init(LockStateChanged);

	// Initialize buttons
	int ret = dk_buttons_init(ButtonEventHandler);
	if (ret)
	{
	LOG_ERR("dk_buttons_init() failed");
	return chip::System::MapErrorZephyr(ret);
	}

	// Initialize function button timer
	k_timer_init(&sFunctionTimer, &AppTask::TimerEventHandler, nullptr);
	k_timer_user_data_set(&sFunctionTimer, this);

	#ifdef CONFIG_MCUMGR_SMP_BT
	// Initialize DFU over SMP
	GetDFUOverSMP().Init(RequestSMPAdvertisingStart);
	GetDFUOverSMP().ConfirmNewImage();
	#endif

	// Initialize CHIP server
	#if CONFIG_CHIP_FACTORY_DATA
	ReturnErrorOnFailure(mFactoryDataProvider.Init());
	SetDeviceInstanceInfoProvider(&mFactoryDataProvider);
	SetDeviceAttestationCredentialsProvider(&mFactoryDataProvider);
	SetCommissionableDataProvider(&mFactoryDataProvider);
	// Read EnableKey from the factory data.
	MutableByteSpan enableKey(sTestEventTriggerEnableKey);
	err = mFactoryDataProvider.GetEnableKey(enableKey);
	if (err != CHIP_NO_ERROR)
	{
	LOG_ERR("mFactoryDataProvider.GetEnableKey() failed. Could not delegate a test event trigger");
	memset(sTestEventTriggerEnableKey, 0, sizeof(sTestEventTriggerEnableKey));
	}
	#else
	SetDeviceAttestationCredentialsProvider(Examples::GetExampleDACProvider());
	#endif

	static CommonCaseDeviceServerInitParams initParams;
	static OTATestEventTriggerDelegate testEventTriggerDelegate{ ByteSpan(sTestEventTriggerEnableKey) };
	(void) initParams.InitializeStaticResourcesBeforeServerInit();
	initParams.testEventTriggerDelegate = &testEventTriggerDelegate;
	ReturnErrorOnFailure(chip::Server::GetInstance().Init(initParams));

	gExampleDeviceInfoProvider.SetStorageDelegate(&Server::GetInstance().GetPersistentStorage());
	chip::DeviceLayer::SetDeviceInfoProvider(&gExampleDeviceInfoProvider);
	ConfigurationMgr().LogDeviceConfig();
	PrintOnboardingCodes(chip::RendezvousInformationFlags(chip::RendezvousInformationFlag::kBLE));

	// Add CHIP event handler and start CHIP thread.
	// Note that all the initialization code should happen prior to this point to avoid data races
	// between the main and the CHIP threads.
	PlatformMgr().AddEventHandler(ChipEventHandler, 0);

	// Disable auto-relock time feature.
	DoorLockServer::Instance().SetAutoRelockTime(kLockEndpointId, 0);

	err = PlatformMgr().StartEventLoopTask();
	if (err != CHIP_NO_ERROR)
	{
	LOG_ERR("PlatformMgr().StartEventLoopTask() failed");
	}

	return err;
	}

	CHIP_ERROR AppTask::StartApp()
	{
	ReturnErrorOnFailure(Init());

	AppEvent event = {};

	while (true)
	{
	k_msgq_get(&sAppEventQueue, &event, K_FOREVER);
	DispatchEvent(&event);
	}

	return CHIP_NO_ERROR;
	}

	void AppTask::LockActionEventHandler(AppEvent * aEvent)
	{
	if (BoltLockMgr().IsLocked())
	{
	BoltLockMgr().Unlock(BoltLockManager::OperationSource::kButton);
	}
	else
	{
	BoltLockMgr().Lock(BoltLockManager::OperationSource::kButton);
	}
	}

	void AppTask::ButtonEventHandler(uint32_t button_state, uint32_t has_changed)
	{
	AppEvent button_event;
	button_event.Type = AppEvent::kEventType_Button;

	if (LOCK_BUTTON_MASK & button_state & has_changed)
	{
	button_event.ButtonEvent.PinNo = LOCK_BUTTON;
	button_event.ButtonEvent.Action = BUTTON_PUSH_EVENT;
	button_event.Handler = LockActionEventHandler;
	sAppTask.PostEvent(&button_event);
	}

	if (FUNCTION_BUTTON_MASK & has_changed)
	{
	button_event.ButtonEvent.PinNo = FUNCTION_BUTTON;
	button_event.ButtonEvent.Action = (FUNCTION_BUTTON_MASK & button_state) ? BUTTON_PUSH_EVENT : BUTTON_RELEASE_EVENT;
	button_event.Handler = FunctionHandler;
	sAppTask.PostEvent(&button_event);
	}

	if (BLE_ADVERTISEMENT_START_BUTTON_MASK & button_state & has_changed)
	{
	button_event.ButtonEvent.PinNo = BLE_ADVERTISEMENT_START_BUTTON;
	button_event.ButtonEvent.Action = BUTTON_PUSH_EVENT;
	button_event.Handler = StartBLEAdvertisementHandler;
	sAppTask.PostEvent(&button_event);
	}
	}

	void AppTask::TimerEventHandler(k_timer * timer)
	{
	AppEvent event;
	event.Type = AppEvent::kEventType_Timer;
	event.TimerEvent.Context = k_timer_user_data_get(timer);
	event.Handler = FunctionTimerEventHandler;
	sAppTask.PostEvent(&event);
	}

	void AppTask::FunctionTimerEventHandler(AppEvent * aEvent)
	{
	if (aEvent->Type != AppEvent::kEventType_Timer)
	return;

	// If we reached here, the button was held past FACTORY_RESET_TRIGGER_TIMEOUT, initiate factory reset
	if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_SoftwareUpdate)
	{
	LOG_INF("Factory Reset Triggered. Release button within %ums to cancel.", FACTORY_RESET_TRIGGER_TIMEOUT);

	// Start timer for FACTORY_RESET_CANCEL_WINDOW_TIMEOUT to allow user to cancel, if required.
	sAppTask.StartTimer(FACTORY_RESET_CANCEL_WINDOW_TIMEOUT);
	sAppTask.mFunction = kFunction_FactoryReset;

	#ifdef CONFIG_STATE_LEDS
	// Turn off all LEDs before starting blink to make sure blink is co-ordinated.
	sStatusLED.Set(false);
	sLockLED.Set(false);
	sUnusedLED_1.Set(false);
	sUnusedLED.Set(false);

	sStatusLED.Blink(500);
	sLockLED.Blink(500);
	sUnusedLED.Blink(500);
	sUnusedLED_1.Blink(500);
	#endif
	}
	else if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_FactoryReset)
	{
	// Actually trigger Factory Reset
	sAppTask.mFunction = kFunction_NoneSelected;

	chip::Server::GetInstance().ScheduleFactoryReset();
	}
	}

	#ifdef CONFIG_MCUMGR_SMP_BT
	void AppTask::RequestSMPAdvertisingStart(void)
	{
	AppEvent event;
	event.Type = AppEvent::kEventType_StartSMPAdvertising;
	event.Handler = [](AppEvent *) { GetDFUOverSMP().StartBLEAdvertising(); };
	sAppTask.PostEvent(&event);
	}
	#endif

	void AppTask::FunctionHandler(AppEvent * aEvent)
	{
	if (aEvent->ButtonEvent.PinNo != FUNCTION_BUTTON)
	return;

	// To trigger software update: press the FUNCTION_BUTTON button briefly (< FACTORY_RESET_TRIGGER_TIMEOUT)
	// To initiate factory reset: press the FUNCTION_BUTTON for FACTORY_RESET_TRIGGER_TIMEOUT + FACTORY_RESET_CANCEL_WINDOW_TIMEOUT
	// All LEDs start blinking after FACTORY_RESET_TRIGGER_TIMEOUT to signal factory reset has been initiated.
	// To cancel factory reset: release the FUNCTION_BUTTON once all LEDs start blinking within the
	// FACTORY_RESET_CANCEL_WINDOW_TIMEOUT
	if (aEvent->ButtonEvent.Action == BUTTON_PUSH_EVENT)
	{
	if (!sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_NoneSelected)
	{
	sAppTask.StartTimer(FACTORY_RESET_TRIGGER_TIMEOUT);

	sAppTask.mFunction = kFunction_SoftwareUpdate;
	}
	}
	else
	{
	// If the button was released before factory reset got initiated, trigger a software update.
	if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_SoftwareUpdate)
	{
	sAppTask.CancelTimer();
	sAppTask.mFunction = kFunction_NoneSelected;

	#ifdef CONFIG_MCUMGR_SMP_BT
	GetDFUOverSMP().StartServer();
	#else
	LOG_INF("Software update is disabled");
	#endif
	}
	else if (sAppTask.mFunctionTimerActive && sAppTask.mFunction == kFunction_FactoryReset)
	{
	sUnusedLED.Set(false);
	sUnusedLED_1.Set(false);

	// Set lock status LED back to show state of lock.
	sLockLED.Set(BoltLockMgr().IsLocked());

	UpdateStatusLED();
	sAppTask.CancelTimer();

	// Change the function to none selected since factory reset has been canceled.
	sAppTask.mFunction = kFunction_NoneSelected;

	LOG_INF("Factory Reset has been Canceled");
	}
	}
	}

	void AppTask::StartBLEAdvertisementHandler(AppEvent *)
	{
	if (Server::GetInstance().GetFabricTable().FabricCount() != 0)
	{
	LOG_INF("Matter service BLE advertising not started - device is already commissioned");
	return;
	}

	if (ConnectivityMgr().IsBLEAdvertisingEnabled())
	{
	LOG_INF("BLE advertising is already enabled");
	return;
	}

	if (Server::GetInstance().GetCommissioningWindowManager().OpenBasicCommissioningWindow() != CHIP_NO_ERROR)
	{
	LOG_ERR("OpenBasicCommissioningWindow() failed");
	}
	}

	void AppTask::UpdateLedStateEventHandler(AppEvent * aEvent)
	{
	if (aEvent->Type == AppEvent::kEventType_UpdateLedState)
	{
	aEvent->UpdateLedStateEvent.LedWidget->UpdateState();
	}
	}

	void AppTask::LEDStateUpdateHandler(LEDWidget & ledWidget)
	{
	AppEvent event;
	event.Type = AppEvent::kEventType_UpdateLedState;
	event.Handler = UpdateLedStateEventHandler;
	event.UpdateLedStateEvent.LedWidget = &ledWidget;
	sAppTask.PostEvent(&event);
	}

	void AppTask::UpdateStatusLED()
	{
	#ifdef CONFIG_STATE_LEDS
	/* Update the status LED.
	*
	* If thread and service provisioned, keep the LED On constantly.
	*
	* If the system has ble connection(s) uptill the stage above, THEN blink the LED at an even
	* rate of 100ms.
	*
	* Otherwise, blink the LED On for a very short time. */
	if (sIsThreadProvisioned && sIsThreadEnabled)
	{
	sStatusLED.Set(true);
	}
	else if (sHaveBLEConnections)
	{
	sStatusLED.Blink(100, 100);
	}
	else
	{
	sStatusLED.Blink(50, 950);
	}
	#endif
	}

	void AppTask::ChipEventHandler(const ChipDeviceEvent * event, intptr_t /* arg */)
	{
	switch (event->Type)
	{
	case DeviceEventType::kCHIPoBLEAdvertisingChange:
	#ifdef CONFIG_CHIP_NFC_COMMISSIONING
	if (event->CHIPoBLEAdvertisingChange.Result == kActivity_Started)
	{
	if (NFCMgr().IsTagEmulationStarted())
	{
	LOG_INF("NFC Tag emulation is already started");
	}
	else
	{
	ShareQRCodeOverNFC(chip::RendezvousInformationFlags(chip::RendezvousInformationFlag::kBLE));
	}
	}
	else if (event->CHIPoBLEAdvertisingChange.Result == kActivity_Stopped)
	{
	NFCMgr().StopTagEmulation();
	}
	#endif
	sHaveBLEConnections = ConnectivityMgr().NumBLEConnections() != 0;
	UpdateStatusLED();
	break;
	case DeviceEventType::kThreadStateChange:
	sIsThreadProvisioned = ConnectivityMgr().IsThreadProvisioned();
	sIsThreadEnabled = ConnectivityMgr().IsThreadEnabled();
	UpdateStatusLED();
	break;
	case DeviceEventType::kDnssdPlatformInitialized:
	#if CONFIG_CHIP_OTA_REQUESTOR
	InitBasicOTARequestor();
	#endif
	break;
	default:
	break;
	}
	}

	void AppTask::CancelTimer()
	{
	k_timer_stop(&sFunctionTimer);
	mFunctionTimerActive = false;
	}

	void AppTask::StartTimer(uint32_t aTimeoutInMs)
	{
	k_timer_start(&sFunctionTimer, K_MSEC(aTimeoutInMs), K_NO_WAIT);
	mFunctionTimerActive = true;
	}

	void AppTask::LockStateChanged(BoltLockManager::State state, BoltLockManager::OperationSource source)
	{
	switch (state)
	{
	case BoltLockManager::State::kLockingInitiated:
	LOG_INF("Lock action initiated");
	sLockLED.Blink(50, 50);
	break;
	case BoltLockManager::State::kLockingCompleted:
	LOG_INF("Lock action completed");
	sLockLED.Set(true);
	break;
	case BoltLockManager::State::kUnlockingInitiated:
	LOG_INF("Unlock action initiated");
	sLockLED.Blink(50, 50);
	break;
	case BoltLockManager::State::kUnlockingCompleted:
	LOG_INF("Unlock action completed");
	sLockLED.Set(false);
	break;
	}

	sAppTask.UpdateClusterState(state, source);
	}

	void AppTask::PostEvent(AppEvent * aEvent)
	{
	if (k_msgq_put(&sAppEventQueue, aEvent, K_NO_WAIT))
	{
	LOG_INF("Failed to post event to app task event queue");
	}
	}

	void AppTask::DispatchEvent(AppEvent * aEvent)
	{
	if (aEvent->Handler)
	{
	aEvent->Handler(aEvent);
	}
	else
	{
	LOG_INF("Event received with no handler. Dropping event.");
	}
	}

	void AppTask::UpdateClusterState(BoltLockManager::State state, BoltLockManager::OperationSource source)
	{
	DlLockState newLockState;

	switch (state)
	{
	case BoltLockManager::State::kLockingCompleted:
	newLockState = DlLockState::kLocked;
	break;
	case BoltLockManager::State::kUnlockingCompleted:
	newLockState = DlLockState::kUnlocked;
	break;
	default:
	newLockState = DlLockState::kNotFullyLocked;
	break;
	}

	SystemLayer().ScheduleLambda([newLockState, source] {
	chip::app::DataModel::Nullable<chip::app::Clusters::DoorLock::DlLockState> currentLockState;
	chip::app::Clusters::DoorLock::Attributes::LockState::Get(kLockEndpointId, currentLockState);

	if (currentLockState.IsNull())
	{
	// Initialize lock state with start value, but not invoke lock/unlock.
	chip::app::Clusters::DoorLock::Attributes::LockState::Set(kLockEndpointId, newLockState);
	}
	else
	{
	LOG_INF("Updating LockState attribute");

	if (!DoorLockServer::Instance().SetLockState(kLockEndpointId, newLockState, source))
	{
	LOG_ERR("Failed to update LockState attribute");
	}
	}
	});
	}