| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * Copyright (c) 2017 Nest Labs, Inc. |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * This file defines the configuration parameters that are required |
| * for the CHIP Reliable Messaging Protocol. |
| * |
| */ |
| #pragma once |
| |
| #include <lib/core/Optional.h> |
| #include <system/SystemClock.h> |
| #include <system/SystemConfig.h> |
| |
| namespace chip { |
| |
| /** |
| * @def CHIP_CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL |
| * |
| * @brief |
| * Active retransmit interval, or time to wait before retransmission after |
| * subsequent failures in milliseconds. |
| * |
| * This is the default value, that might be adjusted by end device depending on its |
| * needs (e.g. sleeping period) using Service Discovery TXT record CRA key. |
| * |
| */ |
| #ifndef CHIP_CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL |
| #define CHIP_CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL (300_ms32) |
| #endif // CHIP_CONFIG_MRP_LOCAL_ACTIVE_RETRY_INTERVAL |
| |
| /** |
| * @def CHIP_CONFIG_MRP_LOCAL_IDLE_RETRY_INTERVAL |
| * |
| * @brief |
| * Initial base retransmission interval, or time to wait before retransmission after first |
| * failure in milliseconds. |
| * |
| * This is the default value, that might be adjusted by end device depending on its |
| * needs (e.g. sleeping period) using Service Discovery TXT record CRI key. |
| */ |
| #ifndef CHIP_CONFIG_MRP_LOCAL_IDLE_RETRY_INTERVAL |
| #define CHIP_CONFIG_MRP_LOCAL_IDLE_RETRY_INTERVAL (5000_ms32) |
| #endif // CHIP_CONFIG_MRP_LOCAL_IDLE_RETRY_INTERVAL |
| |
| /** |
| * @def CHIP_CONFIG_RMP_DEFAULT_ACK_TIMEOUT |
| * |
| * @brief |
| * The default acknowledgment timeout in milliseconds. |
| * |
| */ |
| #ifndef CHIP_CONFIG_RMP_DEFAULT_ACK_TIMEOUT |
| #define CHIP_CONFIG_RMP_DEFAULT_ACK_TIMEOUT (200_ms32) |
| #endif // CHIP_CONFIG_RMP_DEFAULT_ACK_TIMEOUT |
| |
| /** |
| * @def CHIP_CONFIG_RESOLVE_PEER_ON_FIRST_TRANSMIT_FAILURE |
| * |
| * @brief |
| * Should an address lookup of the peer happen on every first message that fails |
| * to send on the link. |
| * |
| * The default value to not perform lookup was selected because most implementations |
| * of address lookup are not cache the and a request is sent on the link. Failing |
| * to deliver the first message is far more likely to happen due to lossy link |
| * than an actual address change where the peer did not reset. In the lossy link |
| * situation, doing further DNS resolutions on a degraded link can exacerbate that |
| * problem greatly. Additionally, every message that arrives from a peer updates the |
| * address. If the peer has fallen off the link due to any other reason, a re-resolve |
| * may not achieve an address that is reachable, even if a resolve response occurs. |
| */ |
| #ifndef CHIP_CONFIG_RESOLVE_PEER_ON_FIRST_TRANSMIT_FAILURE |
| #define CHIP_CONFIG_RESOLVE_PEER_ON_FIRST_TRANSMIT_FAILURE 0 |
| #endif // CHIP_CONFIG_RESOLVE_PEER_ON_FIRST_TRANSMIT_FAILURE |
| |
| /** |
| * @def CHIP_CONFIG_RMP_RETRANS_TABLE_SIZE |
| * |
| * @brief |
| * The default size of the ReliableMessageProtocol retransmission table. |
| * |
| */ |
| #ifndef CHIP_CONFIG_RMP_RETRANS_TABLE_SIZE |
| #if LWIP_PBUF_FROM_CUSTOM_POOLS |
| #define CHIP_CONFIG_RMP_RETRANS_TABLE_SIZE CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS |
| #elif PBUF_POOL_SIZE |
| #define CHIP_CONFIG_RMP_RETRANS_TABLE_SIZE std::min(PBUF_POOL_SIZE, CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS) |
| #elif CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE != 0 |
| #define CHIP_CONFIG_RMP_RETRANS_TABLE_SIZE std::min(CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE, CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS) |
| #else |
| #define CHIP_CONFIG_RMP_RETRANS_TABLE_SIZE CHIP_CONFIG_MAX_EXCHANGE_CONTEXTS |
| #endif // PBUF_POOL_SIZE |
| #endif // CHIP_CONFIG_RMP_RETRANS_TABLE_SIZE |
| |
| /** |
| * @def CHIP_CONFIG_RMP_DEFAULT_MAX_RETRANS |
| * |
| * @brief |
| * The maximum number of retransmissions before giving up. |
| * |
| */ |
| #ifndef CHIP_CONFIG_RMP_DEFAULT_MAX_RETRANS |
| #define CHIP_CONFIG_RMP_DEFAULT_MAX_RETRANS (4) |
| #endif // CHIP_CONFIG_RMP_DEFAULT_MAX_RETRANS |
| |
| /** |
| * @brief |
| * The ReliableMessageProtocol configuration. |
| */ |
| struct ReliableMessageProtocolConfig |
| { |
| ReliableMessageProtocolConfig(System::Clock::Milliseconds32 idleInterval, System::Clock::Milliseconds32 activeInterval) : |
| mIdleRetransTimeout(idleInterval), mActiveRetransTimeout(activeInterval) |
| {} |
| |
| // Configurable timeout in msec for retransmission of the first sent message. |
| System::Clock::Milliseconds32 mIdleRetransTimeout; |
| |
| // Configurable timeout in msec for retransmission of all subsequent messages. |
| System::Clock::Milliseconds32 mActiveRetransTimeout; |
| |
| bool operator==(const ReliableMessageProtocolConfig & that) const |
| { |
| return mIdleRetransTimeout == that.mIdleRetransTimeout && mActiveRetransTimeout == that.mActiveRetransTimeout; |
| } |
| }; |
| |
| /// @brief The default MRP config. The value is defined by spec, and shall be same for all implementations, |
| ReliableMessageProtocolConfig GetDefaultMRPConfig(); |
| |
| /** |
| * @brief The custom value of MRP config for the platform. |
| * @return Missing If the value is same as default value defined by spec |
| * Value The custom value for the platform |
| * |
| * @note This value is not used by our MRP manager. The value is advertised via mDNS or during PASE/CASE paring, and our peers |
| * use it when communicating with us. |
| */ |
| Optional<ReliableMessageProtocolConfig> GetLocalMRPConfig(); |
| |
| #if CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| |
| /** |
| * @brief |
| * |
| * Overrides the local idle and active retransmission timeout parameters (which are usually set through compile |
| * time defines). This is reserved for tests that need the ability to set these at runtime to make certain test scenarios possible. |
| * |
| */ |
| void OverrideLocalMRPConfig(System::Clock::Timeout idleRetransTimeout, System::Clock::Timeout activeRetransTimeout); |
| |
| /** |
| * @brief |
| * |
| * Disables the overrides set previously in OverrideLocalMRPConfig(). |
| * |
| */ |
| void ClearLocalMRPConfigOverride(); |
| #endif |
| |
| } // namespace chip |