| /* |
| * |
| * Copyright (c) 2022 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // THIS FILE IS GENERATED BY ZAP |
| |
| // Prevent multiple inclusion |
| #pragma once |
| |
| // User options for plugin Binding Table Library |
| #define EMBER_BINDING_TABLE_SIZE 10 |
| |
| /**** Network Section ****/ |
| #define EMBER_SUPPORTED_NETWORKS (1) |
| |
| #define EMBER_APS_UNICAST_MESSAGE_COUNT 10 |
| |
| /**** Cluster endpoint counts ****/ |
| #define EMBER_AF_IDENTIFY_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_GROUPS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_SCENES_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ON_OFF_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ON_OFF_SWITCH_CONFIGURATION_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_LEVEL_CONTROL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_BINARY_INPUT_BASIC_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_DESCRIPTOR_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_BINDING_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ACCESS_CONTROL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ACTIONS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_BASIC_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_OTA_SOFTWARE_UPDATE_PROVIDER_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_OTA_SOFTWARE_UPDATE_REQUESTOR_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_LOCALIZATION_CONFIGURATION_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_TIME_FORMAT_LOCALIZATION_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_UNIT_LOCALIZATION_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_POWER_SOURCE_CONFIGURATION_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_POWER_SOURCE_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_GENERAL_COMMISSIONING_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_NETWORK_COMMISSIONING_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_DIAGNOSTIC_LOGS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_GENERAL_DIAGNOSTICS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_SOFTWARE_DIAGNOSTICS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_THREAD_NETWORK_DIAGNOSTICS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_WIFI_NETWORK_DIAGNOSTICS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ETHERNET_NETWORK_DIAGNOSTICS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_BRIDGED_DEVICE_BASIC_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_SWITCH_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ADMINISTRATOR_COMMISSIONING_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_OPERATIONAL_CREDENTIALS_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_GROUP_KEY_MANAGEMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_FIXED_LABEL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_USER_LABEL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_BOOLEAN_STATE_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_MODE_SELECT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_DOOR_LOCK_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_WINDOW_COVERING_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_BARRIER_CONTROL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_PUMP_CONFIGURATION_AND_CONTROL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_THERMOSTAT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_FAN_CONTROL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_THERMOSTAT_USER_INTERFACE_CONFIGURATION_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_COLOR_CONTROL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_BALLAST_CONFIGURATION_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ILLUMINANCE_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_TEMPERATURE_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_PRESSURE_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_FLOW_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_RELATIVE_HUMIDITY_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_OCCUPANCY_SENSING_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_WAKE_ON_LAN_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_CHANNEL_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_TARGET_NAVIGATOR_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_MEDIA_PLAYBACK_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_MEDIA_INPUT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_LOW_POWER_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_KEYPAD_INPUT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_CONTENT_LAUNCHER_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_AUDIO_OUTPUT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_APPLICATION_LAUNCHER_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_APPLICATION_BASIC_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ACCOUNT_LOGIN_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_ELECTRICAL_MEASUREMENT_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| #define EMBER_AF_UNIT_TESTING_CLUSTER_CLIENT_ENDPOINT_COUNT (1) |
| |
| /**** Cluster Plugins ****/ |
| |
| // Use this macro to check if the client side of the Identify cluster is included |
| #define ZCL_USING_IDENTIFY_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_IDENTIFY_CLIENT |
| |
| // Use this macro to check if the client side of the Groups cluster is included |
| #define ZCL_USING_GROUPS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_GROUPS_CLIENT |
| |
| // Use this macro to check if the client side of the Scenes cluster is included |
| #define ZCL_USING_SCENES_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_SCENES_CLIENT |
| |
| // Use this macro to check if the client side of the On/Off cluster is included |
| #define ZCL_USING_ON_OFF_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ON_OFF_CLIENT |
| |
| // Use this macro to check if the client side of the On/off Switch Configuration cluster is included |
| #define ZCL_USING_ON_OFF_SWITCH_CONFIGURATION_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ON_OFF_SWITCH_CONFIGURATION_CLIENT |
| |
| // Use this macro to check if the client side of the Level Control cluster is included |
| #define ZCL_USING_LEVEL_CONTROL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_LEVEL_CONTROL_CLIENT |
| |
| // Use this macro to check if the client side of the Binary Input (Basic) cluster is included |
| #define ZCL_USING_BINARY_INPUT_BASIC_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_BINARY_INPUT_BASIC_CLIENT |
| |
| // Use this macro to check if the client side of the Descriptor cluster is included |
| #define ZCL_USING_DESCRIPTOR_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_DESCRIPTOR_CLIENT |
| |
| // Use this macro to check if the client side of the Binding cluster is included |
| #define ZCL_USING_BINDING_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_BINDING_CLIENT |
| |
| // Use this macro to check if the client side of the Access Control cluster is included |
| #define ZCL_USING_ACCESS_CONTROL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ACCESS_CONTROL_CLIENT |
| |
| // Use this macro to check if the client side of the Actions cluster is included |
| #define ZCL_USING_ACTIONS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ACTIONS_CLIENT |
| |
| // Use this macro to check if the client side of the Basic cluster is included |
| #define ZCL_USING_BASIC_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_BASIC_CLIENT |
| |
| // Use this macro to check if the client side of the OTA Software Update Provider cluster is included |
| #define ZCL_USING_OTA_SOFTWARE_UPDATE_PROVIDER_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_OTA_SOFTWARE_UPDATE_PROVIDER_CLIENT |
| |
| // Use this macro to check if the client side of the OTA Software Update Requestor cluster is included |
| #define ZCL_USING_OTA_SOFTWARE_UPDATE_REQUESTOR_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_OTA_SOFTWARE_UPDATE_REQUESTOR_CLIENT |
| |
| // Use this macro to check if the client side of the Localization Configuration cluster is included |
| #define ZCL_USING_LOCALIZATION_CONFIGURATION_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_LOCALIZATION_CONFIGURATION_CLIENT |
| |
| // Use this macro to check if the client side of the Time Format Localization cluster is included |
| #define ZCL_USING_TIME_FORMAT_LOCALIZATION_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_TIME_FORMAT_LOCALIZATION_CLIENT |
| |
| // Use this macro to check if the client side of the Unit Localization cluster is included |
| #define ZCL_USING_UNIT_LOCALIZATION_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_UNIT_LOCALIZATION_CLIENT |
| |
| // Use this macro to check if the client side of the Power Source Configuration cluster is included |
| #define ZCL_USING_POWER_SOURCE_CONFIGURATION_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_POWER_SOURCE_CONFIGURATION_CLIENT |
| |
| // Use this macro to check if the client side of the Power Source cluster is included |
| #define ZCL_USING_POWER_SOURCE_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_POWER_SOURCE_CLIENT |
| |
| // Use this macro to check if the client side of the General Commissioning cluster is included |
| #define ZCL_USING_GENERAL_COMMISSIONING_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_GENERAL_COMMISSIONING_CLIENT |
| |
| // Use this macro to check if the client side of the Network Commissioning cluster is included |
| #define ZCL_USING_NETWORK_COMMISSIONING_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_NETWORK_COMMISSIONING_CLIENT |
| |
| // Use this macro to check if the client side of the Diagnostic Logs cluster is included |
| #define ZCL_USING_DIAGNOSTIC_LOGS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_DIAGNOSTIC_LOGS_CLIENT |
| |
| // Use this macro to check if the client side of the General Diagnostics cluster is included |
| #define ZCL_USING_GENERAL_DIAGNOSTICS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_GENERAL_DIAGNOSTICS_CLIENT |
| |
| // Use this macro to check if the client side of the Software Diagnostics cluster is included |
| #define ZCL_USING_SOFTWARE_DIAGNOSTICS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_SOFTWARE_DIAGNOSTICS_CLIENT |
| |
| // Use this macro to check if the client side of the Thread Network Diagnostics cluster is included |
| #define ZCL_USING_THREAD_NETWORK_DIAGNOSTICS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_THREAD_NETWORK_DIAGNOSTICS_CLIENT |
| |
| // Use this macro to check if the client side of the WiFi Network Diagnostics cluster is included |
| #define ZCL_USING_WIFI_NETWORK_DIAGNOSTICS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_WI_FI_NETWORK_DIAGNOSTICS_CLIENT |
| |
| // Use this macro to check if the client side of the Ethernet Network Diagnostics cluster is included |
| #define ZCL_USING_ETHERNET_NETWORK_DIAGNOSTICS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ETHERNET_NETWORK_DIAGNOSTICS_CLIENT |
| |
| // Use this macro to check if the client side of the Bridged Device Basic cluster is included |
| #define ZCL_USING_BRIDGED_DEVICE_BASIC_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_BRIDGED_DEVICE_BASIC_CLIENT |
| |
| // Use this macro to check if the client side of the Switch cluster is included |
| #define ZCL_USING_SWITCH_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_SWITCH_CLIENT |
| |
| // Use this macro to check if the client side of the AdministratorCommissioning cluster is included |
| #define ZCL_USING_ADMINISTRATOR_COMMISSIONING_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ADMINISTRATOR_COMMISSIONING_CLIENT |
| |
| // Use this macro to check if the client side of the Operational Credentials cluster is included |
| #define ZCL_USING_OPERATIONAL_CREDENTIALS_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_OPERATIONAL_CREDENTIALS_CLIENT |
| |
| // Use this macro to check if the client side of the Group Key Management cluster is included |
| #define ZCL_USING_GROUP_KEY_MANAGEMENT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_GROUP_KEY_MANAGEMENT_CLIENT |
| |
| // Use this macro to check if the client side of the Fixed Label cluster is included |
| #define ZCL_USING_FIXED_LABEL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_FIXED_LABEL_CLIENT |
| |
| // Use this macro to check if the client side of the User Label cluster is included |
| #define ZCL_USING_USER_LABEL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_USER_LABEL_CLIENT |
| |
| // Use this macro to check if the client side of the Boolean State cluster is included |
| #define ZCL_USING_BOOLEAN_STATE_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_BOOLEAN_STATE_CLIENT |
| |
| // Use this macro to check if the client side of the Mode Select cluster is included |
| #define ZCL_USING_MODE_SELECT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_MODE_SELECT_CLIENT |
| |
| // Use this macro to check if the client side of the Door Lock cluster is included |
| #define ZCL_USING_DOOR_LOCK_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_DOOR_LOCK_CLIENT |
| |
| // Use this macro to check if the client side of the Window Covering cluster is included |
| #define ZCL_USING_WINDOW_COVERING_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_WINDOW_COVERING_CLIENT |
| |
| // Use this macro to check if the client side of the Barrier Control cluster is included |
| #define ZCL_USING_BARRIER_CONTROL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_BARRIER_CONTROL_CLIENT |
| |
| // Use this macro to check if the client side of the Pump Configuration and Control cluster is included |
| #define ZCL_USING_PUMP_CONFIGURATION_AND_CONTROL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_PUMP_CONFIGURATION_AND_CONTROL_CLIENT |
| |
| // Use this macro to check if the client side of the Thermostat cluster is included |
| #define ZCL_USING_THERMOSTAT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_THERMOSTAT_CLIENT |
| |
| // Use this macro to check if the client side of the Fan Control cluster is included |
| #define ZCL_USING_FAN_CONTROL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_FAN_CONTROL_CLIENT |
| |
| // Use this macro to check if the client side of the Thermostat User Interface Configuration cluster is included |
| #define ZCL_USING_THERMOSTAT_USER_INTERFACE_CONFIGURATION_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_THERMOSTAT_USER_INTERFACE_CONFIGURATION_CLIENT |
| |
| // Use this macro to check if the client side of the Color Control cluster is included |
| #define ZCL_USING_COLOR_CONTROL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_COLOR_CONTROL_CLIENT |
| |
| // Use this macro to check if the client side of the Ballast Configuration cluster is included |
| #define ZCL_USING_BALLAST_CONFIGURATION_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_BALLAST_CONFIGURATION_CLIENT |
| |
| // Use this macro to check if the client side of the Illuminance Measurement cluster is included |
| #define ZCL_USING_ILLUMINANCE_MEASUREMENT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ILLUMINANCE_MEASUREMENT_CLIENT |
| |
| // Use this macro to check if the client side of the Temperature Measurement cluster is included |
| #define ZCL_USING_TEMPERATURE_MEASUREMENT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_TEMPERATURE_MEASUREMENT_CLIENT |
| |
| // Use this macro to check if the client side of the Pressure Measurement cluster is included |
| #define ZCL_USING_PRESSURE_MEASUREMENT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_PRESSURE_MEASUREMENT_CLIENT |
| |
| // Use this macro to check if the client side of the Flow Measurement cluster is included |
| #define ZCL_USING_FLOW_MEASUREMENT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_FLOW_MEASUREMENT_CLIENT |
| |
| // Use this macro to check if the client side of the Relative Humidity Measurement cluster is included |
| #define ZCL_USING_RELATIVE_HUMIDITY_MEASUREMENT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_RELATIVE_HUMIDITY_MEASUREMENT_CLIENT |
| |
| // Use this macro to check if the client side of the Occupancy Sensing cluster is included |
| #define ZCL_USING_OCCUPANCY_SENSING_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_OCCUPANCY_SENSING_CLIENT |
| |
| // Use this macro to check if the client side of the Wake on LAN cluster is included |
| #define ZCL_USING_WAKE_ON_LAN_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_WAKE_ON_LAN_CLIENT |
| |
| // Use this macro to check if the client side of the Channel cluster is included |
| #define ZCL_USING_CHANNEL_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_CHANNEL_CLIENT |
| |
| // Use this macro to check if the client side of the Target Navigator cluster is included |
| #define ZCL_USING_TARGET_NAVIGATOR_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_TARGET_NAVIGATOR_CLIENT |
| |
| // Use this macro to check if the client side of the Media Playback cluster is included |
| #define ZCL_USING_MEDIA_PLAYBACK_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_MEDIA_PLAYBACK_CLIENT |
| |
| // Use this macro to check if the client side of the Media Input cluster is included |
| #define ZCL_USING_MEDIA_INPUT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_MEDIA_INPUT_CLIENT |
| |
| // Use this macro to check if the client side of the Low Power cluster is included |
| #define ZCL_USING_LOW_POWER_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_LOW_POWER_CLIENT |
| |
| // Use this macro to check if the client side of the Keypad Input cluster is included |
| #define ZCL_USING_KEYPAD_INPUT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_KEYPAD_INPUT_CLIENT |
| |
| // Use this macro to check if the client side of the Content Launcher cluster is included |
| #define ZCL_USING_CONTENT_LAUNCHER_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_CONTENT_LAUNCHER_CLIENT |
| |
| // Use this macro to check if the client side of the Audio Output cluster is included |
| #define ZCL_USING_AUDIO_OUTPUT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_AUDIO_OUTPUT_CLIENT |
| |
| // Use this macro to check if the client side of the Application Launcher cluster is included |
| #define ZCL_USING_APPLICATION_LAUNCHER_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_APPLICATION_LAUNCHER_CLIENT |
| |
| // Use this macro to check if the client side of the Application Basic cluster is included |
| #define ZCL_USING_APPLICATION_BASIC_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_APPLICATION_BASIC_CLIENT |
| |
| // Use this macro to check if the client side of the Account Login cluster is included |
| #define ZCL_USING_ACCOUNT_LOGIN_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ACCOUNT_LOGIN_CLIENT |
| |
| // Use this macro to check if the client side of the Electrical Measurement cluster is included |
| #define ZCL_USING_ELECTRICAL_MEASUREMENT_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_ELECTRICAL_MEASUREMENT_CLIENT |
| |
| // Use this macro to check if the client side of the Unit Testing cluster is included |
| #define ZCL_USING_UNIT_TESTING_CLUSTER_CLIENT |
| #define EMBER_AF_PLUGIN_UNIT_TESTING_CLIENT |
