| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: Diagnostic Logs Tests |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Diagnostic Logs" |
| endpoint: 0 |
| timeout: 120 |
| end_user_support_log_file_path: "/tmp/end_user_support_log.txt" |
| end_user_support_log_file_content: "End User Support Log Content" |
| end_user_support_log_file_content_long: |
| "End User Support Log Content is more than 1024 |
| bytes............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................X" |
| network_diagnostics_log_file_path: "/tmp/network_diagnostics_log.txt" |
| network_diagnostics_log_file_content: "Network Diagnostic Log Content" |
| crash_log_file_path: "/tmp/crash_log.txt" |
| crash_log_file_content: "Crash Log Content" |
| |
| bdx_transfer_file_path: "/tmp/end_user_support_bdx_output.txt" |
| bdx_transfer_file_name: "end_user_support_bdx_output.txt" |
| |
| bdx_transfer_file_path_1: "/tmp/bdx_log_output_1.txt" |
| bdx_transfer_file_name_1: "bdx_log_output_1.txt" |
| bdx_transfer_file_path_2: "/tmp/bdx_log_output_2.txt" |
| bdx_transfer_file_name_2: "bdx_log_output_2.txt" |
| |
| long_log_file_content: |
| "This is a long log content... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ....................................................... |
| ......................................................." |
| |
| tests: |
| # |
| # Set up the test by adding some destination log files for the target accessory: |
| # 1. End User Support |
| # 2. Network Diagnostics |
| # 3. Crash |
| # |
| # The first thing to do is to delete them if they exist. It could be some |
| # left over from a previous test run. |
| # |
| |
| - label: "Delete EndUserSupport logs" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: end_user_support_log_file_path |
| |
| - label: "Delete NetworkDiag logs" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: network_diagnostics_log_file_path |
| |
| - label: "Delete CrashLogs logs" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: crash_log_file_path |
| |
| - label: "Stop the accessory" |
| cluster: "SystemCommands" |
| command: "Stop" |
| |
| - label: "Create End User Support logs" |
| cluster: "SystemCommands" |
| command: "CreateFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: end_user_support_log_file_path |
| - name: "fileContent" |
| value: end_user_support_log_file_content |
| |
| - label: "Create NetworkDiag logs" |
| cluster: "SystemCommands" |
| command: "CreateFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: network_diagnostics_log_file_path |
| - name: "fileContent" |
| value: network_diagnostics_log_file_content |
| |
| - label: "Create CrashLogs logs" |
| cluster: "SystemCommands" |
| command: "CreateFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: crash_log_file_path |
| - name: "fileContent" |
| value: crash_log_file_content |
| |
| - label: "Start the accessory with the destination logs files" |
| cluster: "SystemCommands" |
| command: "Start" |
| arguments: |
| values: |
| - name: "endUserSupportLogPath" |
| value: end_user_support_log_file_path |
| - name: "networkDiagnosticsLogPath" |
| value: network_diagnostics_log_file_path |
| - name: "crashLogPath" |
| value: crash_log_file_path |
| |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Read End User Support log intent" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 0 # ResponsePayload |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: end_user_support_log_file_content |
| |
| - label: "Read NetworkDiag intent" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 1 # NetworkDiag |
| - name: "RequestedProtocol" |
| value: 0 # ResponsePayload |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: network_diagnostics_log_file_content |
| |
| - label: "Read CrashLogs intent" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 2 # CrashLogs |
| - name: "RequestedProtocol" |
| value: 0 # ResponsePayload |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: crash_log_file_content |
| |
| - label: "Write End User Support logs to be over the 1024 bytes limit" |
| cluster: "SystemCommands" |
| command: "CreateFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: end_user_support_log_file_path |
| - name: "fileContent" |
| value: end_user_support_log_file_content_long |
| |
| - label: "Read End User Support log intent" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 0 # ResponsePayload |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| constraints: |
| minLength: 1024 |
| maxLength: 1024 |
| |
| - label: "Write End User Support logs back to the previous value" |
| cluster: "SystemCommands" |
| command: "CreateFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: end_user_support_log_file_path |
| - name: "fileContent" |
| value: end_user_support_log_file_content |
| |
| # |
| # Check BDX Implementation |
| # |
| |
| # In the case where the Node is able to fit the entirety of the requested logs within the LogContent field, the Status field of |
| # the RetrieveLogsResponse SHALL be set to Exhausted and a BDX session SHALL NOT be initiated. |
| - label: "Read End User Support log using BDX" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: "ItDoesNotMatterForThisTest" |
| response: |
| values: |
| - name: "Status" |
| value: 1 # Exhausted |
| - name: "LogContent" |
| value: end_user_support_log_file_content |
| |
| - label: "Write End User Support logs to be over the 1024 bytes limit" |
| cluster: "SystemCommands" |
| command: "CreateFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: end_user_support_log_file_path |
| - name: "fileContent" |
| value: end_user_support_log_file_content_long |
| |
| # If the RequestedProtocol is set to BDX the Node SHOULD immediately realize the RetrieveLogsResponse command by initiating a BDX |
| # Transfer, sending a BDX SendInit message with the File Designator field of the message set to the value of the TransferFileDesignator |
| # field of the RetrieveLogsRequest. |
| # On reception of a BDX SendAccept message the Node SHALL send a RetrieveLogsResponse command with a Status field set to Success and |
| # proceed with the log transfer over BDX. |
| - label: "Delete possible leftover from previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path |
| |
| - label: "BDX: Request End User Support" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: bdx_transfer_file_name |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: "" |
| |
| - label: |
| "BDX: Request End User Support while the previous request is running" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: "ItDoesNotMatterForThisBusyTest" |
| response: |
| values: |
| - name: "Status" |
| value: 3 # Busy |
| - name: "LogContent" |
| value: "" |
| |
| - label: "BDX: Wait for 'Diagnostic logs transfer: Success' message" |
| cluster: "DelayCommands" |
| command: "WaitForMessage" |
| arguments: |
| values: |
| - name: "registerKey" |
| value: "default" |
| - name: "message" |
| value: "Diagnostic logs transfer: Success" |
| |
| - label: |
| "Compare the content the original log and the file that has been |
| created as the result of the BDX transfer" |
| cluster: "SystemCommands" |
| command: "CompareFiles" |
| arguments: |
| values: |
| - name: "file1" |
| value: end_user_support_log_file_path |
| - name: "file2" |
| value: bdx_transfer_file_path |
| |
| # If a failure StatusReport is received in response to the SendInit message, the Node SHALL send a RetrieveLogsResponse command with a |
| # Status of Denied. |
| - label: |
| "BDX: Request End User Support log with a special |
| TransferFileDesignator name that forces the responder to issue an |
| error when SendInit is received" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: "Error:OnTransferBegin" # Should issue an error when SendInit is received. |
| response: |
| values: |
| - name: "Status" |
| value: 4 # Denied |
| - name: "LogContent" |
| value: "" |
| |
| # |
| # If the Intent and/or the RequestedProtocol arguments contain invalid (out of range) values the command SHALL fail with a Status Code of INVALID_COMMAND. |
| # |
| - label: "Read unknown log intent" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 128 # undefined value |
| - name: "RequestedProtocol" |
| value: 0 # ResponsePayload |
| response: |
| error: "INVALID_COMMAND" |
| |
| - label: "Read known log intent on unknown protocol" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 128 # undefined value |
| response: |
| error: "INVALID_COMMAND" |
| |
| # |
| # If the RequestedProtocol is set to BDX and there is no TransferFileDesignator the command SHALL fail with a Status Code of INVALID_COMMAND. |
| # |
| - label: |
| "Read End User Support log intent using BDX but without a |
| TransferFileDesignator" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| response: |
| error: "INVALID_COMMAND" |
| |
| - label: |
| "Read End User Support log intent using BDX but with a |
| TransferFileDesignator that is longer than the kMaxFileDesignatorLen |
| character limit" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: "ThisNameIsLongerThanThekMaxFileDesignatorLenCharacterConstraint" |
| response: |
| error: "CONSTRAINT_ERROR" |
| |
| # |
| # Validate that a new BDX transfer can be started after a previous successful BDX transfer |
| # |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path |
| |
| - label: "BDX: Request End User Support" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: bdx_transfer_file_name |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: "" |
| |
| - label: "BDX: Wait for 'Diagnostic logs transfer: Success' message" |
| cluster: "DelayCommands" |
| command: "WaitForMessage" |
| arguments: |
| values: |
| - name: "registerKey" |
| value: "default" |
| - name: "message" |
| value: "Diagnostic logs transfer: Success" |
| |
| - label: |
| "Compare the content the original log and the file that has been |
| created as the result of the BDX transfer" |
| cluster: "SystemCommands" |
| command: "CompareFiles" |
| arguments: |
| values: |
| - name: "file1" |
| value: end_user_support_log_file_path |
| - name: "file2" |
| value: bdx_transfer_file_path |
| |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path |
| |
| - label: "BDX: Request End User Support" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: bdx_transfer_file_name |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: "" |
| |
| - label: "BDX: Wait for 'Diagnostic logs transfer: Success' message" |
| cluster: "DelayCommands" |
| command: "WaitForMessage" |
| arguments: |
| values: |
| - name: "registerKey" |
| value: "default" |
| - name: "message" |
| value: "Diagnostic logs transfer: Success" |
| |
| - label: |
| "Compare the content the original log and the file that has been |
| created as the result of the BDX transfer" |
| cluster: "SystemCommands" |
| command: "CompareFiles" |
| arguments: |
| values: |
| - name: "file1" |
| value: end_user_support_log_file_path |
| - name: "file2" |
| value: bdx_transfer_file_path |
| |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path |
| |
| # |
| # Validate that a new BDX transfer can be started after a previous unsuccessful BDX transfer |
| # |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path |
| |
| - label: "BDX: Request End User Support" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: "Error:OnTransferBegin" # Should issue an error when SendInit is received. |
| response: |
| values: |
| - name: "Status" |
| value: 4 # kDenied |
| - name: "LogContent" |
| value: "" |
| |
| - label: "BDX: Request End User Support" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: bdx_transfer_file_name |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: "" |
| |
| - label: "BDX: Wait for 'Diagnostic logs transfer: Success' message" |
| cluster: "DelayCommands" |
| command: "WaitForMessage" |
| arguments: |
| values: |
| - name: "registerKey" |
| value: "default" |
| - name: "message" |
| value: "Diagnostic logs transfer: Success" |
| |
| - label: |
| "Compare the content the original log and the file that has been |
| created as the result of the BDX transfer" |
| cluster: "SystemCommands" |
| command: "CompareFiles" |
| arguments: |
| values: |
| - name: "file1" |
| value: end_user_support_log_file_path |
| - name: "file2" |
| value: bdx_transfer_file_path |
| |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path |
| |
| # |
| # Validate that a new BDX transfer can be started after a previous unsuccessful BDX transfer |
| # stopped once the RetrieveLogsResponse has been sent/received. |
| # |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path |
| |
| - label: "Delete possible leftover from previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: "/tmp/Error:OnTransferData" |
| |
| - label: "BDX: Request End User Support" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: "Error:OnTransferData" # Should issue an error after SendInit is received. |
| response: |
| values: |
| - name: "Status" |
| value: 0 # kSuccess |
| - name: "LogContent" |
| value: "" |
| |
| - label: |
| "BDX: Wait for 'Diagnostic logs transfer: StatusReport Error' message" |
| cluster: "DelayCommands" |
| command: "WaitForMessage" |
| arguments: |
| values: |
| - name: "registerKey" |
| value: "default" |
| - name: "message" |
| value: "Diagnostic logs transfer: StatusReport Error" |
| |
| - label: "BDX: Request End User Support" |
| command: "RetrieveLogsRequest" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 0 # EndUserSupport |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: bdx_transfer_file_name |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: "" |
| |
| - label: "BDX: Wait for 'Diagnostic logs transfer: Success' message" |
| cluster: "DelayCommands" |
| command: "WaitForMessage" |
| arguments: |
| values: |
| - name: "registerKey" |
| value: "default" |
| - name: "message" |
| value: "Diagnostic logs transfer: Success" |
| |
| - label: |
| "Compare the content the original log and the file that has been |
| created as the result of the BDX transfer" |
| cluster: "SystemCommands" |
| command: "CompareFiles" |
| arguments: |
| values: |
| - name: "file1" |
| value: end_user_support_log_file_path |
| - name: "file2" |
| value: bdx_transfer_file_path |
| |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path |
| |
| # |
| # Validate that multiple BDX transfers can run in parallels. |
| # |
| - label: "Delete possible leftover from previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path_1 |
| |
| - label: "Delete possible leftover from previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path_2 |
| |
| - label: "Update End User Support logs with a long log" |
| cluster: "SystemCommands" |
| command: "CreateFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: end_user_support_log_file_path |
| - name: "fileContent" |
| value: long_log_file_content |
| |
| - label: "Update Network Diagnostic logs with a long log" |
| cluster: "SystemCommands" |
| command: "CreateFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: network_diagnostics_log_file_path |
| - name: "fileContent" |
| value: long_log_file_content |
| |
| - label: "Start a second accessory" |
| cluster: "SystemCommands" |
| command: "Start" |
| arguments: |
| values: |
| - name: "discriminator" |
| value: 50 |
| - name: "port" |
| value: 5601 |
| - name: "kvs" |
| value: "/tmp/chip_kvs_second" |
| - name: "endUserSupportLogPath" |
| value: end_user_support_log_file_path |
| - name: "networkDiagnosticsLogPath" |
| value: network_diagnostics_log_file_path |
| - name: "registerKey" |
| value: "default#2" |
| |
| - label: "Commission second accessory from beta" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| - name: "payload" |
| value: "MT:-24J0IX4122-.548G00" |
| |
| - label: "Wait for the second commissioned device to be retrieved for beta" |
| identity: "beta" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "BDX: Request End User Support from the first accessory" |
| command: "RetrieveLogsRequest" |
| identity: "alpha" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 1 # NetworkDiagnostics |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: bdx_transfer_file_name_1 |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: "" |
| |
| - label: "BDX: Request End User Support from the second accessory" |
| command: "RetrieveLogsRequest" |
| identity: "beta" |
| arguments: |
| values: |
| - name: "Intent" |
| value: 1 # NetworkDiagnostics |
| - name: "RequestedProtocol" |
| value: 1 # BDX |
| - name: "TransferFileDesignator" |
| value: bdx_transfer_file_name_2 |
| response: |
| values: |
| - name: "Status" |
| value: 0 # Success |
| - name: "LogContent" |
| value: "" |
| |
| - label: |
| "BDX: Wait for 'Diagnostic logs transfer: Success' message from the |
| first accessory" |
| cluster: "DelayCommands" |
| command: "WaitForMessage" |
| arguments: |
| values: |
| - name: "registerKey" |
| value: "default" |
| - name: "message" |
| value: "Diagnostic logs transfer: Success" |
| |
| - label: |
| "BDX: Wait for 'Diagnostic logs transfer: Success' message from the |
| second accessory" |
| cluster: "DelayCommands" |
| command: "WaitForMessage" |
| arguments: |
| values: |
| - name: "registerKey" |
| value: "default#2" |
| - name: "message" |
| value: "Diagnostic logs transfer: Success" |
| |
| - label: |
| "Compare the content the original log and the file that has been |
| created as the result of the BDX transfer" |
| cluster: "SystemCommands" |
| command: "CompareFiles" |
| arguments: |
| values: |
| - name: "file1" |
| value: end_user_support_log_file_path |
| - name: "file2" |
| value: bdx_transfer_file_path_1 |
| |
| - label: |
| "Compare the content the original log and the file that has been |
| created as the result of the BDX transfer" |
| cluster: "SystemCommands" |
| command: "CompareFiles" |
| arguments: |
| values: |
| - name: "file1" |
| value: network_diagnostics_log_file_path |
| - name: "file2" |
| value: bdx_transfer_file_path_2 |
| |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path_1 |
| |
| - label: "Delete the result of the previous run" |
| cluster: "SystemCommands" |
| command: "DeleteFile" |
| arguments: |
| values: |
| - name: "filePath" |
| value: bdx_transfer_file_path_2 |
