/******************************************************************************* | |
* @file rsi_ble_config.h | |
* @brief | |
******************************************************************************* | |
* # License | |
* <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b> | |
******************************************************************************* | |
* | |
* The licensor of this software is Silicon Laboratories Inc. Your use of this | |
* software is governed by the terms of Silicon Labs Master Software License | |
* Agreement (MSLA) available at | |
* www.silabs.com/about-us/legal/master-software-license-agreement. This | |
* software is distributed to you in Source Code format and is governed by the | |
* sections of the MSLA applicable to Source Code. | |
* | |
******************************************************************************/ | |
#ifndef RSI_BLE_CONFIG_H | |
#define RSI_BLE_CONFIG_H | |
#include "rsi_ble_apis.h" | |
#include <rsi_data_types.h> | |
/****************************************************** | |
* * Macros | |
* ******************************************************/ | |
//! application event list | |
#define RSI_BLE_CONN_EVENT (0x01) | |
#define RSI_BLE_DISCONN_EVENT (0x02) | |
#define RSI_BLE_GATT_WRITE_EVENT (0x03) | |
#define RSI_BLE_MTU_EVENT (0x04) | |
#define RSI_BLE_GATT_INDICATION_CONFIRMATION (0x05) | |
#define RSI_BLE_RESP_ATT_VALUE (0x06) | |
#define RSI_SSID (0x0D) | |
#define RSI_SECTYPE (0x0E) | |
#define RSI_BLE_WLAN_DISCONN_NOTIFY (0x0F) | |
#define RSI_WLAN_ALREADY (0x10) | |
#define RSI_WLAN_NOT_ALREADY (0x11) | |
#define RSI_BLE_WLAN_TIMEOUT_NOTIFY (0x12) | |
#define RSI_BLE_WLAN_JOIN_STATUS (0x15) | |
#define RSI_APP_FW_VERSION (0x13) | |
#define RSI_BLE_WLAN_DISCONNECT_STATUS (0x14) | |
#define RSI_REM_DEV_ADDR_LEN (18) | |
#define RSI_REM_DEV_NAME_LEN (31) | |
#define RSI_BLE_DEV_NAME "CCP_DEVICE" | |
#define RSI_BLE_SET_RAND_ADDR "00:23:A7:12:34:56" | |
#define CLEAR_WHITELIST (0x00) | |
#define ADD_DEVICE_TO_WHITELIST (0x01) | |
#define DELETE_DEVICE_FROM_WHITELIST (0x02) | |
#define ALL_PHYS (0x00) | |
#define RSI_BLE_DEV_ADDR_RESOLUTION_ENABLE (0) | |
#define RSI_OPERMODE_WLAN_BLE (13) | |
/***********************************************************************************************************************************************/ | |
//! Characteristic Presenatation Format Fields | |
/***********************************************************************************************************************************************/ | |
#define RSI_BLE_UINT8_FORMAT (0x04) | |
#define RSI_BLE_EXPONENT (0x00) | |
#define RSI_BLE_PERCENTAGE_UNITS_UUID (0x27AD) | |
#define RSI_BLE_NAME_SPACE (0x01) | |
#define RSI_BLE_DESCRIPTION (0x010B) | |
//! BLE characteristic custom service uuid | |
#define RSI_BLE_CUSTOM_SERVICE_UUID (0xFFF6) | |
#define RSI_BLE_CUSTOM_LEVEL_UUID (0x1FF1) | |
#ifdef RSI_M4_INTERFACE | |
#define RSI_BLE_MAX_NBR_ATT_REC (20) | |
#define RSI_BLE_MAX_NBR_SLAVES (1) | |
#define RSI_BLE_NUM_CONN_EVENTS (2) | |
#else | |
#define RSI_BLE_MAX_NBR_ATT_REC (80) | |
#define RSI_BLE_MAX_NBR_SLAVES (3) | |
#define RSI_BLE_NUM_CONN_EVENTS (20) | |
#endif | |
#define RSI_BLE_MAX_NBR_ATT_SERV (10) | |
#define RSI_BLE_MAX_NBR_MASTERS (1) | |
#define RSI_BLE_GATT_ASYNC_ENABLE (1) | |
#define RSI_BLE_GATT_INIT (0) | |
#define RSI_BLE_START_SCAN (0x01) | |
#define RSI_BLE_STOP_SCAN (0x00) | |
#define RSI_BLE_SCAN_TYPE SCAN_TYPE_ACTIVE | |
#define RSI_BLE_SCAN_FILTER_TYPE SCAN_FILTER_TYPE_ALL | |
/* Number of BLE GATT RECORD SIZE IN (n*16 BYTES), eg:(0x40*16)=1024 bytes */ | |
#define RSI_BLE_NUM_REC_BYTES (0x40) | |
#define RSI_BLE_INDICATE_CONFIRMATION_FROM_HOST (0) | |
/*=======================================================================*/ | |
//! Advertising command parameters | |
/*=======================================================================*/ | |
#define RSI_BLE_ADV_TYPE UNDIR_CONN | |
#define RSI_BLE_ADV_FILTER_TYPE ALLOW_SCAN_REQ_ANY_CONN_REQ_ANY | |
#define RSI_BLE_ADV_DIR_ADDR_TYPE LE_PUBLIC_ADDRESS | |
#define RSI_BLE_ADV_DIR_ADDR "00:15:83:6A:64:17" | |
//! Reduced the BLE adv interval time to match with EFR BLE | |
#define RSI_BLE_ADV_INT_MIN (0x20) | |
#define RSI_BLE_ADV_INT_MAX (0x20) | |
#define RSI_BLE_ADV_CHANNEL_MAP (0x07) | |
//! Advertise status | |
//! Start the advertising process | |
#define RSI_BLE_START_ADV (0x01) | |
//! Stop the advertising process | |
#define RSI_BLE_STOP_ADV (0x00) | |
//! BLE Tx Power Index On Air | |
#define RSI_BLE_PWR_INX (30) | |
//! BLE Active H/w Pwr Features | |
#define BLE_DISABLE_DUTY_CYCLING (0) | |
#define BLE_DUTY_CYCLING (1) | |
#define BLR_DUTY_CYCLING (2) | |
#define BLE_4X_PWR_SAVE_MODE (4) | |
#define RSI_BLE_PWR_SAVE_OPTIONS BLE_DISABLE_DUTY_CYCLING | |
//! Advertise types | |
/* Advertising will be visible(discoverable) to all the devices. | |
* Scanning/Connection is also accepted from all devices | |
* */ | |
#define UNDIR_CONN (0x80) | |
/* Advertising will be visible(discoverable) to the particular device | |
* mentioned in RSI_BLE_ADV_DIR_ADDR only. | |
* Scanning and Connection will be accepted from that device only. | |
* */ | |
#define DIR_CONN (0x81) | |
/* Advertising will be visible(discoverable) to all the devices. | |
* Scanning will be accepted from all the devices. | |
* Connection will be not be accepted from any device. | |
* */ | |
#define UNDIR_SCAN (0x82) | |
/* Advertising will be visible(discoverable) to all the devices. | |
* Scanning and Connection will not be accepted from any device | |
* */ | |
#define UNDIR_NON_CONN (0x83) | |
/* Advertising will be visible(discoverable) to the particular device | |
* mentioned in RSI_BLE_ADV_DIR_ADDR only. | |
* Scanning and Connection will be accepted from that device only. | |
* */ | |
#define DIR_CONN_LOW_DUTY_CYCLE (0x84) | |
//! Advertising flags | |
#define LE_LIMITED_DISCOVERABLE (0x01) | |
#define LE_GENERAL_DISCOVERABLE (0x02) | |
#define LE_BR_EDR_NOT_SUPPORTED (0x04) | |
//! Advertise filters | |
#define ALLOW_SCAN_REQ_ANY_CONN_REQ_ANY (0x00) | |
#define ALLOW_SCAN_REQ_WHITE_LIST_CONN_REQ_ANY (0x01) | |
#define ALLOW_SCAN_REQ_ANY_CONN_REQ_WHITE_LIST (0x02) | |
#define ALLOW_SCAN_REQ_WHITE_LIST_CONN_REQ_WHITE_LIST (0x03) | |
//! Address types | |
#define LE_PUBLIC_ADDRESS (0x00) | |
#define LE_RANDOM_ADDRESS (0x01) | |
#define LE_RESOLVABLE_PUBLIC_ADDRESS (0x02) | |
#define LE_RESOLVABLE_RANDOM_ADDRESS (0x03) | |
/*=======================================================================*/ | |
/*=======================================================================*/ | |
//! Connection parameters | |
/*=======================================================================*/ | |
#define LE_SCAN_INTERVAL (0x0100) | |
#define LE_SCAN_WINDOW (0x0050) | |
#define CONNECTION_INTERVAL_MIN (0x00A0) | |
#define CONNECTION_INTERVAL_MAX (0x00A0) | |
#define CONNECTION_LATENCY (0x0000) | |
#define SUPERVISION_TIMEOUT (0x07D0) // 2000 | |
/*=======================================================================*/ | |
/*=======================================================================*/ | |
//! Scan command parameters | |
/*=======================================================================*/ | |
#define SL_WFX_BLE_SCAN_TYPE SCAN_TYPE_ACTIVE | |
#define SL_WFX_BLE_SCAN_FILTER_TYPE SCAN_FILTER_TYPE_ALL | |
//! Scan status | |
#define SL_WFX_BLE_START_SCAN (0x01) | |
#define SL_WFX_BLE_STOP_SCAN (0x00) | |
//! Scan types | |
#define SCAN_TYPE_ACTIVE (0x01) | |
#define SCAN_TYPE_PASSIVE (0x00) | |
//! Scan filters | |
#define SCAN_FILTER_TYPE_ALL (0x00) | |
#define SCAN_FILTER_TYPE_ONLY_WHITE_LIST (0x01) | |
#define SL_WFX_SEL_INTERNAL_ANTENNA (0x00) | |
#define SL_WFX_SEL_EXTERNAL_ANTENNA (0x01) | |
#define SL_WFX_BT_CTRL_REMOTE_USER_TERMINATED (0x4E13) | |
#define SL_WFX_BT_CTRL_REMOTE_DEVICE_TERMINATED_CONNECTION_DUE_TO_LOW_RESOURCES (0x4E14) | |
#define SL_WFX_BT_CTRL_REMOTE_POWERING_OFF (0x4E15) | |
#define SL_WFX_BT_CTRL_TERMINATED_MIC_FAILURE (0x4E3D) | |
#define SL_WFX_BT_FAILED_TO_ESTABLISH_CONN (0x4E3E) | |
#define SL_WFX_BT_INVALID_RANGE (0x4E60) | |
/***********************************************************************************************************************************************/ | |
//! RS9116 Firmware Configurations | |
/***********************************************************************************************************************************************/ | |
/*=======================================================================*/ | |
//! Power save command parameters | |
/*=======================================================================*/ | |
//! set handshake type of power mode | |
#define RSI_HAND_SHAKE_TYPE GPIO_BASED | |
#define BLE_ATT_REC_SIZE (500) | |
#define NO_OF_VAL_ATT (5) //! Attribute value count | |
/***********************************************************************************************************************************************/ | |
//! user defined structure | |
/***********************************************************************************************************************************************/ | |
typedef struct rsi_ble_att_list_s | |
{ | |
uuid_t char_uuid; | |
uint16_t handle; | |
uint16_t value_len; | |
uint16_t max_value_len; | |
uint8_t char_val_prop; | |
void * value; | |
} rsi_ble_att_list_t; | |
typedef struct rsi_ble_s | |
{ | |
uint8_t DATA[BLE_ATT_REC_SIZE]; | |
uint16_t DATA_ix; | |
uint16_t att_rec_list_count; | |
rsi_ble_att_list_t att_rec_list[NO_OF_VAL_ATT]; | |
} rsi_ble_t; | |
#endif |