| # |
| # Copyright (c) 2024 Project CHIP Authors |
| # All rights reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # See https://github.com/project-chip/connectedhomeip/blob/master/docs/testing/python.md#defining-the-ci-test-arguments |
| # for details about the block below. |
| # |
| # === BEGIN CI TEST ARGUMENTS === |
| # test-runner-runs: |
| # run1: |
| # app: ${ALL_CLUSTERS_APP} |
| # app-args: --discriminator 1234 --KVS kvs1 --trace-to json:${TRACE_APP}.json |
| # script-args: > |
| # --endpoint 1 |
| # --storage-path admin_storage.json |
| # --commissioning-method on-network |
| # --discriminator 1234 |
| # --passcode 20202021 |
| # --trace-to json:${TRACE_TEST_JSON}.json |
| # --trace-to perfetto:${TRACE_TEST_PERFETTO}.perfetto |
| # --PICS src/app/tests/suites/certification/ci-pics-values |
| # factory-reset: true |
| # quiet: true |
| # run2: |
| # app: ${ALL_CLUSTERS_APP} |
| # app-args: --discriminator 1234 --KVS kvs1 --trace-to json:${TRACE_APP}.json |
| # script-args: > |
| # --endpoint 2 |
| # --storage-path admin_storage.json |
| # --commissioning-method on-network |
| # --discriminator 1234 |
| # --passcode 20202021 |
| # --trace-to json:${TRACE_TEST_JSON}.json |
| # --trace-to perfetto:${TRACE_TEST_PERFETTO}.perfetto |
| # --PICS src/app/tests/suites/certification/ci-pics-values |
| # factory-reset: true |
| # quiet: true |
| # run3: |
| # app: ${ALL_CLUSTERS_APP} |
| # app-args: --discriminator 1234 --KVS kvs1 --trace-to json:${TRACE_APP}.json |
| # script-args: > |
| # --endpoint 3 |
| # --storage-path admin_storage.json |
| # --commissioning-method on-network |
| # --discriminator 1234 |
| # --passcode 20202021 |
| # --trace-to json:${TRACE_TEST_JSON}.json |
| # --trace-to perfetto:${TRACE_TEST_PERFETTO}.perfetto |
| # --PICS src/app/tests/suites/certification/ci-pics-values |
| # factory-reset: true |
| # quiet: true |
| # run4: |
| # app: ${ALL_CLUSTERS_APP} |
| # app-args: --discriminator 1234 --KVS kvs1 --trace-to json:${TRACE_APP}.json |
| # script-args: > |
| # --endpoint 4 |
| # --storage-path admin_storage.json |
| # --commissioning-method on-network |
| # --discriminator 1234 |
| # --passcode 20202021 |
| # --trace-to json:${TRACE_TEST_JSON}.json |
| # --trace-to perfetto:${TRACE_TEST_PERFETTO}.perfetto |
| # --PICS src/app/tests/suites/certification/ci-pics-values |
| # factory-reset: true |
| # quiet: true |
| # === END CI TEST ARGUMENTS === |
| # |
| # These tests run on every endpoint regardless of whether a switch is present because they are set up to auto-select. |
| |
| import json |
| import logging |
| import queue |
| import time |
| from datetime import datetime, timedelta |
| from typing import Any |
| |
| import chip.clusters as Clusters |
| import test_plan_support |
| from chip.clusters import ClusterObjects as ClusterObjects |
| from chip.clusters.Attribute import EventReadResult |
| from chip.testing.matter_testing import (AttributeValue, ClusterAttributeChangeAccumulator, EventChangeCallback, MatterBaseTest, |
| TestStep, await_sequence_of_reports, default_matter_test_main, has_feature, |
| run_if_endpoint_matches) |
| from chip.tlv import uint |
| from mobly import asserts |
| |
| logger = logging.getLogger(__name__) |
| |
| SIMULATED_LONG_PRESS_LENGTH_SECONDS = 2.0 |
| |
| |
| def bump_substep(step: str) -> str: |
| """Given a string like "5a", bump it to "5b", or "6c" to "6d" """ |
| if len(step) == 0: |
| raise ValueError("Can't bump empty steps!") |
| |
| end_char = step[-1] |
| if not end_char.isalpha(): |
| return step + "a" |
| |
| step_prefix = step[:-1] |
| next_end_char = chr(ord(end_char) + 1) |
| if ord(next_end_char) > ord('z'): |
| raise ValueError(f"Reached max substep for step '{step}'") |
| next_step = step_prefix + next_end_char |
| |
| return next_step |
| |
| |
| class TC_SwitchTests(MatterBaseTest): |
| def __init__(self, *args, **kwargs): |
| super().__init__(*args, **kwargs) |
| self._default_pressed_position = self.user_params.get("default_pressed_position", 1) |
| |
| def setup_test(self): |
| super().setup_test() |
| self.is_ci = self._use_button_simulator() |
| |
| def _send_named_pipe_command(self, command_dict: dict[str, Any]): |
| app_pid = self.matter_test_config.app_pid |
| if app_pid == 0: |
| asserts.fail("The --app-pid flag must be set when usage of button simulation named pipe is required (e.g. CI)") |
| |
| app_pipe = f"/tmp/chip_all_clusters_fifo_{app_pid}" |
| command = json.dumps(command_dict) |
| |
| # Sends an out-of-band command to the sample app |
| with open(app_pipe, "w") as outfile: |
| logging.info(f"Sending named pipe command to {app_pipe}: '{command}'") |
| outfile.write(command + "\n") |
| # Delay for pipe command to be processed (otherwise tests may be flaky). |
| time.sleep(0.1) |
| |
| def _use_button_simulator(self) -> bool: |
| return self.check_pics("PICS_SDK_CI_ONLY") or self.user_params.get("use_button_simulator", False) |
| |
| def _send_multi_press_named_pipe_command(self, endpoint_id: int, number_of_presses: int, pressed_position: int, feature_map: uint, multi_press_max: uint): |
| command_dict = {"Name": 'SimulateMultiPress', "EndpointId": endpoint_id, |
| "ButtonId": pressed_position, "MultiPressPressedTimeMillis": 500, "MultiPressReleasedTimeMillis": 500, |
| "MultiPressNumPresses": number_of_presses, "FeatureMap": feature_map, "MultiPressMax": multi_press_max} |
| self._send_named_pipe_command(command_dict) |
| |
| def _send_long_press_named_pipe_command(self, endpoint_id: int, pressed_position: int, feature_map: int): |
| command_dict = {"Name": "SimulateLongPress", "EndpointId": endpoint_id, |
| "ButtonId": pressed_position, "LongPressDelayMillis": int(1000 * (SIMULATED_LONG_PRESS_LENGTH_SECONDS - 0.5)), |
| "LongPressDurationMillis": int(1000 * SIMULATED_LONG_PRESS_LENGTH_SECONDS), "FeatureMap": feature_map} |
| self._send_named_pipe_command(command_dict) |
| |
| def _send_latching_switch_named_pipe_command(self, endpoint_id: int, new_position: int): |
| command_dict = {"Name": "SimulateLatchPosition", "EndpointId": endpoint_id, "PositionId": new_position} |
| self._send_named_pipe_command(command_dict) |
| |
| def _send_switch_idle_named_pipe_command(self, endpoint_id: int): |
| command_dict = {"Name": "SimulateSwitchIdle", "EndpointId": endpoint_id} |
| self._send_named_pipe_command(command_dict) |
| |
| def _ask_for_switch_idle(self, endpoint_id: int, omit_for_simulator: bool = False): |
| if not self._use_button_simulator(): |
| self.wait_for_user_input(prompt_msg="Ensure switch is idle") |
| elif not omit_for_simulator: |
| self._send_switch_idle_named_pipe_command(endpoint_id) |
| |
| def _ask_for_switch_position(self, endpoint_id: int, new_position: int): |
| if not self._use_button_simulator(): |
| self.wait_for_user_input(prompt_msg=f"Move latched switch to position {new_position}, if it is not already there.") |
| else: |
| self._send_latching_switch_named_pipe_command(endpoint_id, new_position) |
| |
| def _ask_for_multi_press_short_long(self, endpoint_id: int, pressed_position: int, feature_map: uint, multi_press_max: uint): |
| if not self._use_button_simulator(): |
| msg = f""" |
| Actuate the switch in the following sequence (read full sequence first): |
| 1. Operate switch (press briefly) associated with position {pressed_position} on the DUT then release switch from DUT |
| 2. Operate switch (keep pressed for long time, e.g. 5 seconds) on the DUT immediately after the previous step |
| 3. Release switch from the DUT |
| """ |
| self.wait_for_user_input(msg) |
| else: |
| # This is just a simulator, ignore the long press instruction for now, it doesn't matter for the CI. It does for cert. |
| self._send_multi_press_named_pipe_command( |
| endpoint_id, number_of_presses=2, pressed_position=pressed_position, feature_map=feature_map, multi_press_max=multi_press_max) |
| |
| def _ask_for_multi_press_long_short(self, endpoint_id, pressed_position, feature_map: int): |
| if not self._use_button_simulator(): |
| msg = f""" |
| Actuate the switch in the following sequence (read full sequence first): |
| 1. Operate switch (keep pressed for long time, e.g. 5 seconds) on the DUT |
| 2. Releases switch from the DUT |
| 3. Immediately after the previous step completes, operate switch (press briefly) associated with position {pressed_position} on the DUT then release switch from DUT |
| """ |
| self.wait_for_user_input(msg) |
| else: |
| # This is just the start of the sequence |
| # we'll need to send the short press after getting the LongRelease event because the simulator doesn't queue requests. |
| self._send_long_press_named_pipe_command(endpoint_id, pressed_position, feature_map) |
| |
| def _ask_for_multi_press(self, endpoint_id: int, number_of_presses: int, pressed_position: int, feature_map: uint, multi_press_max: uint): |
| if not self._use_button_simulator(): |
| self.wait_for_user_input( |
| f'Execute {number_of_presses} separate brief press/release cycles on position {pressed_position}.') |
| else: |
| self._send_multi_press_named_pipe_command(endpoint_id, number_of_presses, |
| pressed_position, feature_map, multi_press_max) |
| |
| def _ask_for_long_press(self, endpoint_id: int, pressed_position: int, feature_map): |
| if not self._use_button_simulator(): |
| self.wait_for_user_input( |
| prompt_msg=f"Press switch position {pressed_position} for a long time (around 5 seconds) on the DUT, then release it.") |
| else: |
| self._send_long_press_named_pipe_command(endpoint_id, pressed_position, feature_map) |
| |
| def _ask_for_keep_pressed(self, endpoint_id: int, pressed_position: int, feature_map: int): |
| if not self._use_button_simulator(): |
| self.wait_for_user_input( |
| prompt_msg=f"Press switch position {pressed_position} for a long time (around 5 seconds) on the DUT, keep it pressed, do NOT release it.") |
| else: |
| self._send_long_press_named_pipe_command(endpoint_id, pressed_position, feature_map) |
| |
| def _ask_for_release(self): |
| # Since we used a long press for this, "ask for release" on the button simulator just means waiting out the delay |
| if not self._use_button_simulator(): |
| self.wait_for_user_input( |
| prompt_msg="Release the button." |
| ) |
| else: |
| # This will await for the events to be generated properly. Note that there is a bit of a |
| # race here for the button simulator, but this race is extremely unlikely to be lost. |
| time.sleep(SIMULATED_LONG_PRESS_LENGTH_SECONDS + 0.5) |
| |
| def _await_sequence_of_events(self, event_queue: queue.Queue, endpoint_id: int, sequence: list[ClusterObjects.ClusterEvent], timeout_sec: float): |
| start_time = time.time() |
| elapsed = 0.0 |
| time_remaining = timeout_sec |
| |
| sequence_idx = 0 |
| actual_events = [] |
| |
| while time_remaining > 0: |
| logging.info(f"Expecting event {sequence[sequence_idx]} on endpoint {endpoint_id}") |
| try: |
| item: EventReadResult = event_queue.get(block=True, timeout=time_remaining) |
| expected_event = sequence[sequence_idx] |
| event_data = item.Data |
| |
| if item.Header.EndpointId == endpoint_id and item.Header.ClusterId == event_data.cluster_id: |
| actual_events.append(event_data) |
| |
| if event_data == expected_event: |
| logging.info(f"Got expected Event {sequence_idx+1}/{len(sequence)}: {event_data}") |
| sequence_idx += 1 |
| else: |
| asserts.assert_equal(event_data, expected_event, msg="Did not get expected event in correct sequence.") |
| |
| # We are done waiting when we have accumulated all results. |
| if sequence_idx == len(sequence): |
| logging.info("Got all expected events, done waiting.") |
| return |
| except queue.Empty: |
| # No error, we update timeouts and keep going |
| pass |
| |
| elapsed = time.time() - start_time |
| time_remaining = timeout_sec - elapsed |
| |
| asserts.fail(f"Did not get full sequence {sequence} in {timeout_sec:.1f} seconds. Got {actual_events} before time-out.") |
| |
| def _expect_no_events_for_cluster(self, event_queue: queue.Queue, endpoint_id: int, expected_cluster: ClusterObjects.Cluster, timeout_sec: float): |
| start_time = time.time() |
| elapsed = 0.0 |
| time_remaining = timeout_sec |
| |
| logging.info(f"Waiting {timeout_sec: .1f} seconds for no more events for cluster { |
| expected_cluster} on endpoint {endpoint_id}") |
| while time_remaining > 0: |
| try: |
| item: EventReadResult = event_queue.get(block=True, timeout=time_remaining) |
| event_data = item.Data |
| |
| if item.Header.EndpointId == endpoint_id and item.Header.ClusterId == event_data.cluster_id and item.Header.ClusterId == expected_cluster.id: |
| asserts.fail(f"Got Event {event_data} when we expected no further events for {expected_cluster}") |
| except queue.Empty: |
| # No error, we update timeouts and keep going |
| pass |
| |
| elapsed = time.time() - start_time |
| time_remaining = timeout_sec - elapsed |
| |
| logging.info(f"Successfully waited for no further events on {expected_cluster} for {elapsed:.1f} seconds") |
| |
| def _received_event(self, event_listener: EventChangeCallback, target_event: ClusterObjects.ClusterEvent, timeout_s: int) -> bool: |
| """ |
| Returns true if this event was received, false otherwise |
| """ |
| remaining = timedelta(seconds=timeout_s) |
| end_time = datetime.now() + remaining |
| while (remaining.seconds > 0): |
| try: |
| event = event_listener.event_queue.get(timeout=remaining.seconds) |
| except queue.Empty: |
| return False |
| |
| if event.Header.EventId == target_event.event_id: |
| return True |
| remaining = end_time - datetime.now() |
| return False |
| |
| def steps_TC_SWTCH_2_2(self): |
| return [TestStep(1, test_plan_support.commission_if_required(), "", is_commissioning=True), |
| TestStep(2, "Set up subscription to all events and attributes of Switch cluster on the endpoint"), |
| TestStep(3, "Operator sets switch to first position on the DUT"), |
| TestStep(4, "TH reads the CurrentPosition attribute from the DUT.", "Verify that the value is 0."), |
| TestStep(5, "Operator sets switch to second position (one) on the DUT", |
| "Verify that the TH receives SwitchLatched event with NewPosition set to 1 from the DUT."), |
| TestStep(6, "TH reads the CurrentPosition attribute from the DUT", |
| "Verify that the value is 1, and that a subscription report was received for that change."), |
| TestStep(7, "If there are more than 2 positions, test subsequent positions of the DUT"), |
| TestStep(8, "Operator sets switch to first position on the DUT."), |
| TestStep(9, "Wait 10 seconds for event reports stable." "Verify that last SwitchLatched event received is for NewPosition 0."), |
| TestStep(10, "TH reads the CurrentPosition attribute from the DUT", |
| "Verify that the value is 0, and that a subscription report was received for that change."), |
| ] |
| |
| @run_if_endpoint_matches(has_feature(Clusters.Switch, Clusters.Switch.Bitmaps.Feature.kLatchingSwitch)) |
| async def test_TC_SWTCH_2_2(self): |
| post_prompt_settle_delay_seconds = 10.0 |
| cluster = Clusters.Switch |
| endpoint_id = self.matter_test_config.endpoint |
| |
| # Step 1: Commissioning - already done |
| self.step(1) |
| |
| # Step 2: Set up subscription to all events of Switch cluster on the endpoint. |
| self.step(2) |
| event_listener = EventChangeCallback(cluster) |
| await event_listener.start(self.default_controller, self.dut_node_id, endpoint=endpoint_id) |
| attrib_listener = ClusterAttributeChangeAccumulator(cluster) |
| await attrib_listener.start(self.default_controller, self.dut_node_id, endpoint=endpoint_id) |
| |
| # Pre-get number of positions for step 7 later. |
| num_positions = await self.read_single_attribute_check_success(cluster=cluster, attribute=cluster.Attributes.NumberOfPositions) |
| asserts.assert_greater(num_positions, 1, "Latching switch has only 1 position, this is impossible.") |
| |
| # Step 3: Operator sets switch to first position on the DUT. |
| self.step(3) |
| self._ask_for_switch_position(endpoint_id, new_position=0) |
| |
| # Step 4: TH reads the CurrentPosition attribute from the DUT. |
| # Verify that the value is 0. |
| self.step(4) |
| button_val = await self.read_single_attribute_check_success(cluster=cluster, attribute=cluster.Attributes.CurrentPosition) |
| asserts.assert_equal(button_val, 0, "Switch position value is not 0") |
| |
| attrib_listener.reset() |
| event_listener.reset() |
| |
| for expected_switch_position in range(1, num_positions): |
| # Step 5: Operator sets switch to second position (one) on the DUT", |
| # Verify that the TH receives SwitchLatched event with NewPosition set to 1 from the DUT |
| if expected_switch_position == 1: |
| self.step(5) |
| self._ask_for_switch_position(endpoint_id, expected_switch_position) |
| |
| data = event_listener.wait_for_event_report(cluster.Events.SwitchLatched, timeout_sec=post_prompt_settle_delay_seconds) |
| logging.info(f"-> SwitchLatched event last received: {data}") |
| asserts.assert_equal(data, cluster.Events.SwitchLatched( |
| newPosition=expected_switch_position), "Did not get expected switch position") |
| |
| # Step 6: TH reads the CurrentPosition attribute from the DUT", "Verify that the value is 1 |
| if expected_switch_position == 1: # Indicate step 7 only once |
| self.step(6) |
| button_val = await self.read_single_attribute_check_success(cluster=cluster, attribute=cluster.Attributes.CurrentPosition) |
| asserts.assert_equal(button_val, expected_switch_position, f"Switch position is not {expected_switch_position}") |
| logging.info(f"Checking to see if a report for {expected_switch_position} is received") |
| attrib_listener.await_sequence_of_reports(attribute=cluster.Attributes.CurrentPosition, sequence=[ |
| expected_switch_position], timeout_sec=post_prompt_settle_delay_seconds) |
| |
| # Step 7: If there are more than 2 positions, test subsequent positions of the DUT |
| if expected_switch_position == 1: |
| if num_positions > 2: # Indicate step 7 only once |
| self.step(7) |
| else: |
| self.skip_step(7) |
| |
| if num_positions > 2: |
| logging.info("Looping for the other positions") |
| |
| # Step 8: Operator sets switch to first position on the DUT. |
| self.step(8) |
| event_listener.flush_events() |
| self._ask_for_switch_position(endpoint_id, new_position=0) |
| |
| # Step 9: Wait 10 seconds for event reports stable. |
| # Verify that last SwitchLatched event received is for NewPosition 0. |
| self.step(9) |
| time.sleep(10.0 if not self.is_ci else 1.0) |
| |
| expected_switch_position = 0 |
| last_event = event_listener.get_last_event() |
| asserts.assert_is_not_none(last_event, "Did not get SwitchLatched events since last operator action.") |
| last_event_data = last_event.Data |
| logging.info(f"-> SwitchLatched event last received: {last_event_data}") |
| asserts.assert_equal(last_event_data, cluster.Events.SwitchLatched( |
| newPosition=expected_switch_position), "Did not get expected switch position") |
| |
| # Step 10: TH reads the CurrentPosition attribute from the DUT. |
| # Verify that the value is 0 |
| self.step(10) |
| |
| button_val = await self.read_single_attribute_check_success(cluster=cluster, attribute=cluster.Attributes.CurrentPosition) |
| asserts.assert_equal(button_val, 0, "Button value is not 0") |
| |
| logging.info(f"Checking to see if a report for {expected_switch_position} is received") |
| expected_final_value = [AttributeValue( |
| endpoint_id, attribute=cluster.Attributes.CurrentPosition, value=expected_switch_position)] |
| attrib_listener.await_all_final_values_reported(expected_final_value, timeout_sec=post_prompt_settle_delay_seconds) |
| |
| def steps_TC_SWTCH_2_3(self): |
| return [TestStep(1, test_plan_support.commission_if_required(), "", is_commissioning=True), |
| TestStep(2, "Set up subscription to all events of Switch cluster on the endpoint"), |
| TestStep(3, "Operator does not operate switch on the DUT"), |
| TestStep(4, "TH reads the CurrentPosition attribute from the DUT", "Verify that the value is 0"), |
| TestStep(5, "Operator operates switch (keep it pressed, and wait at least 5 seconds)", |
| "Verify that the TH receives InitialPress event with NewPosition set to 1 on the DUT"), |
| TestStep(6, "TH reads the CurrentPosition attribute from the DUT", "Verify that the value is 1"), |
| TestStep(7, "Operator releases switch on the DUT"), |
| TestStep("8a", "If the DUT implements the MSR feature and does not implement the MSL feature, verify that the TH receives ShortRelease event with NewPosition set to 0 on the DUT", "Event received"), |
| TestStep("8b", "If the DUT implements the MSR feature and the MSL feature, verify that the TH receives LongRelease event with NewPosition set to 0 on the DUT", "Event received"), |
| TestStep( |
| "8c", "If the DUT implements the AS feature, verify that the TH does not receive ShortRelease event on the DUT", "No event received"), |
| TestStep(9, "TH reads the CurrentPosition attribute from the DUT", "Verify that the value is 0"), |
| ] |
| |
| @run_if_endpoint_matches(has_feature(Clusters.Switch, Clusters.Switch.Bitmaps.Feature.kMomentarySwitch)) |
| async def test_TC_SWTCH_2_3(self): |
| # Commissioning - already done |
| self.step(1) |
| cluster = Clusters.Switch |
| feature_map = await self.read_single_attribute_check_success(cluster, attribute=cluster.Attributes.FeatureMap) |
| |
| has_msr_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitchRelease) != 0 |
| has_msl_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitchLongPress) != 0 |
| has_as_feature = (feature_map & cluster.Bitmaps.Feature.kActionSwitch) != 0 |
| |
| endpoint_id = self.matter_test_config.endpoint |
| |
| self.step(2) |
| event_listener = EventChangeCallback(cluster) |
| await event_listener.start(self.default_controller, self.dut_node_id, endpoint=endpoint_id) |
| |
| self.step(3) |
| self._ask_for_switch_idle(endpoint_id) |
| |
| self.step(4) |
| button_val = await self.read_single_attribute_check_success(cluster=cluster, attribute=cluster.Attributes.CurrentPosition) |
| asserts.assert_equal(button_val, 0, "Button value is not 0") |
| |
| self.step(5) |
| # We're using a long press here with a very long duration (in computer-land). This will let us check the intermediate values. |
| # This is 1s larger than the subscription ceiling |
| self.pressed_position = 1 |
| self._ask_for_keep_pressed(endpoint_id, self.pressed_position, feature_map) |
| event_listener.wait_for_event_report(cluster.Events.InitialPress) |
| |
| self.step(6) |
| button_val = await self.read_single_attribute_check_success(cluster=cluster, attribute=cluster.Attributes.CurrentPosition) |
| asserts.assert_equal(button_val, self.pressed_position, f"Button value is not {self.pressed_position}") |
| |
| self.step(7) |
| self._ask_for_release() |
| |
| self.step("8a") |
| if has_msr_feature and not has_msl_feature: |
| asserts.assert_true(self._received_event(event_listener, cluster.Events.ShortRelease, 10), |
| "Did not receive short release") |
| else: |
| self.mark_current_step_skipped() |
| |
| self.step("8b") |
| if has_msr_feature and has_msl_feature: |
| asserts.assert_true(self._received_event(event_listener, cluster.Events.LongRelease, 10), |
| "Did not receive long release") |
| |
| self.step("8c") |
| if has_as_feature: |
| asserts.assert_false(self._received_event(event_listener, cluster.Events.ShortRelease, 10), "Received short release") |
| else: |
| self.mark_current_step_skipped() |
| |
| self.step(9) |
| button_val = await self.read_single_attribute_check_success(cluster=cluster, attribute=cluster.Attributes.CurrentPosition) |
| asserts.assert_equal(button_val, 0, "Button value is not 0") |
| |
| def desc_TC_SWTCH_2_4(self) -> str: |
| return "[TC-SWTCH-2.4] Momentary Switch Long Press Verification" |
| |
| def steps_TC_SWTCH_2_4(self): |
| return [TestStep(1, test_plan_support.commission_if_required(), "", is_commissioning=True), |
| TestStep(2, "Set up subscription to all events and attributes of Switch cluster on the endpoint"), |
| TestStep(3, "Operator does not operate switch on the DUT"), |
| TestStep(4, "TH reads the CurrentPosition attribute from the DUT", "Verify that the value is 0"), |
| TestStep(5, "Operator operates switch (keep pressed for long time, e.g. 5 seconds) on the DUT, then release it", |
| """ |
| * TH expects receiving a subscription report of CurrentPosition 1, followed by a report of Current Position 0. |
| * TH expects receiving at InitialPress event with NewPosition = 1. |
| * if MSL feature is supported, TH expect receiving LongPress/LongRelease in that order. |
| * if MS & (!MSL & !AS & !MSR & !MSM) features present, TH expects receiving no further events for 10 seconds after release. |
| * if (MSR & !MSL) features present, TH expects receiving ShortRelease event. |
| """) |
| ] |
| |
| @run_if_endpoint_matches(has_feature(Clusters.Switch, Clusters.Switch.Bitmaps.Feature.kMomentarySwitch)) |
| async def test_TC_SWTCH_2_4(self): |
| switch_pressed_position = self._default_pressed_position |
| post_prompt_settle_delay_seconds = 10.0 |
| |
| endpoint_id = self.matter_test_config.endpoint |
| cluster = Clusters.Objects.Switch |
| |
| # Step 1: Commission DUT - already done |
| self.step(1) |
| |
| # Read feature map to set bool markers |
| feature_map = await self.read_single_attribute_check_success(cluster, attribute=cluster.Attributes.FeatureMap) |
| |
| has_ms_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitch) != 0 |
| has_msr_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitchRelease) != 0 |
| has_msl_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitchLongPress) != 0 |
| has_msm_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitchMultiPress) != 0 |
| has_as_feature = (feature_map & cluster.Bitmaps.Feature.kActionSwitch) != 0 |
| |
| if not has_ms_feature: |
| logging.info("Skipping rest of test: SWTCH.S.F01(MS) feature not present") |
| self.skip_all_remaining_steps("2") |
| |
| # Step 2: Set up subscription to all events and attributes of Switch cluster on the endpoint |
| self.step(2) |
| event_listener = EventChangeCallback(cluster) |
| await event_listener.start(self.default_controller, self.dut_node_id, endpoint=endpoint_id) |
| attrib_listener = ClusterAttributeChangeAccumulator(cluster) |
| await attrib_listener.start(self.default_controller, self.dut_node_id, endpoint=endpoint_id) |
| |
| # Step 3: Operator does not operate switch on the DUT |
| self.step(3) |
| self._ask_for_switch_idle(endpoint_id) |
| |
| # Step 4: TH reads the CurrentPosition attribute from the DUT |
| self.step(4) |
| |
| # Verify that the value is 0 |
| current_position = await self.read_single_attribute_check_success(cluster, attribute=cluster.Attributes.CurrentPosition) |
| asserts.assert_equal(current_position, 0) |
| |
| # Step 5: Operator operates switch (keep pressed for long time, e.g. 5 seconds) on the DUT, the release it |
| self.step(5) |
| self._ask_for_long_press(endpoint_id, switch_pressed_position, feature_map) |
| |
| # - TH expects report of CurrentPosition 1, followed by a report of Current Position 0. |
| logging.info( |
| f"Starting to wait for {post_prompt_settle_delay_seconds:.1f} seconds for CurrentPosition to go {switch_pressed_position}, then 0.") |
| await_sequence_of_reports(report_queue=attrib_listener.attribute_queue, endpoint_id=endpoint_id, attribute=cluster.Attributes.CurrentPosition, sequence=[ |
| switch_pressed_position, 0], timeout_sec=post_prompt_settle_delay_seconds) |
| |
| # - TH expects at least InitialPress with NewPosition = 1 |
| logging.info(f"Starting to wait for {post_prompt_settle_delay_seconds:.1f} seconds for InitialPress event.") |
| expected_events = [cluster.Events.InitialPress(newPosition=switch_pressed_position)] |
| self._await_sequence_of_events(event_queue=event_listener.event_queue, endpoint_id=endpoint_id, |
| sequence=expected_events, timeout_sec=post_prompt_settle_delay_seconds) |
| |
| # - if MSL feature is supported, expect to see LongPress/LongRelease in that order. |
| if not has_msl_feature: |
| logging.info("Since MSL feature unsupported, skipping check for LongPress/LongRelease") |
| else: |
| # - TH expects report of LongPress, LongRelease in that order. |
| logging.info(f"Starting to wait for {post_prompt_settle_delay_seconds:.1f} seconds for LongPress then LongRelease.") |
| expected_events = [] |
| expected_events.append(cluster.Events.LongPress(newPosition=switch_pressed_position)) |
| expected_events.append(cluster.Events.LongRelease(previousPosition=switch_pressed_position)) |
| self._await_sequence_of_events(event_queue=event_listener.event_queue, endpoint_id=endpoint_id, |
| sequence=expected_events, timeout_sec=post_prompt_settle_delay_seconds) |
| |
| # - if MS & (!MSL & !AS & !MSR & !MSM) features present, expect no further events for 10 seconds after release. |
| if not has_msl_feature and not has_as_feature and not has_msr_feature and not has_msm_feature: |
| self._expect_no_events_for_cluster(event_queue=event_listener.event_queue, |
| endpoint_id=endpoint_id, expected_cluster=cluster, timeout_sec=10.0) |
| |
| # - if (MSR & !MSL) features present, expect to see ShortRelease event. |
| if not has_msl_feature and has_msr_feature: |
| expected_events = [cluster.Events.ShortRelease(previousPosition=switch_pressed_position)] |
| self._await_sequence_of_events(event_queue=event_listener.event_queue, endpoint_id=endpoint_id, |
| sequence=expected_events, timeout_sec=post_prompt_settle_delay_seconds) |
| |
| def steps_TC_SWTCH_2_5(self): |
| return [TestStep(1, test_plan_support.commission_if_required(), "", is_commissioning=True), |
| TestStep(2, "Set up a subscription to all Switch cluster events"), |
| TestStep(3, "Operate does not operate the switch on the DUT"), |
| TestStep("4a", "Operator operates switch (press briefly) associated with position 1 on the DUT then release switch from DUT", |
| """ |
| |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT |
| """), |
| TestStep("4b", "Operator does not operate switch on the DUT", |
| "TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 1 from the DUT"), |
| TestStep("5a", "Operator repeat step 4a 2 times quickly", |
| """ |
| |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives MultiPressOngoing event with NewPosition set to 1 and CurrentNumberOfPressesCounted set to 2 from the DUT |
| * Verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT + |
| |
| The events sequence SHALL follow the same sequence as above |
| """), |
| TestStep("5b", "Operator does not operate switch on the DUT", |
| "Verify that the TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 2 from the DUT"), |
| TestStep("6a", "If MultiPressMax == 2 (see 2c of TC-SWTCH-2.1), skip steps 6b .. 6c"), |
| TestStep("6b", "Operator repeat step 4a 3 times quickly", |
| """ |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * If MSR supported, Verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives MultiPressOngoing event with NewPosition set to 1 and CurrentNumberOfPressesCounted set to 2 from the DUT |
| * If MSR supported, Verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives MultiPressOngoing event with NewPosition set to 1 and CurrentNumberOfPressesCounted set to 3 from the DUT |
| * If MSR supported, Verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT + |
| |
| The events sequence from the subscription SHALL follow the same sequence as expressed above, in the exact order of events specified. |
| """), |
| TestStep("6c", "Operator does not operate switch on the DUT for 5 seconds", |
| "Verify that the TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 3 from the DUT"), |
| TestStep(7, "Set up subscription to all Switch cluster events"), |
| TestStep("8a", |
| """ |
| Operator operates switch in below sequence: |
| 1. Operator operates switch (press briefly) associated with position 1 on the DUT then release switch from DUT |
| 2. Operator operates switch (keep pressed for long time, e.g. 5 seconds) on the DUT immediately after the previous step |
| 3. Operator releases switch from the DUT |
| """, |
| """ |
| |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * If MSR supported, Verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| |
| * Verify that the TH receives MultiPressOngoing event with NewPosition set to 1 and CurrentNumberOfPressesCounted set to 2 from the DUT |
| * If MSR supported, verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT |
| * Verify that the TH does not receive LongPress event from the DUT |
| * Verify that the TH does not receive LongRelease event from the DUT |
| |
| The events sequence from the subscription SHALL follow the same sequence as expressed above, in the exact order of events specified. |
| """), |
| TestStep("8b", "Operator does not operate switch on the DUT", |
| "TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 2 from the DUT"), |
| TestStep("9a", |
| """ |
| Operator operates switch in below sequence: |
| 1. Operator operates switch (keep pressed for long time, e.g. 5 seconds) on the DUT |
| 2. Operator releases switch from the DUT |
| 3. Immediately after the previous step completes, Operator operates switch (press briefly) associated with position 1 on the DUT then release switch from DUT |
| """, |
| """ |
| |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives (one, not more than one) LongPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives LongRelease event with PreviousPosition set to 1 from the DUT |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * If MSR supported, verify that the TH receives ShortRelease event with PreviousPosition set to 1 from the DUT |
| * Verify that the TH does not receive MultiPressOngoing event from the DUT |
| |
| The events sequence from the subscription SHALL follow the same sequence as expressed above, in the exact order of events specified. |
| """), |
| TestStep("9b", "Operator does not operate switch on the DUT", |
| "TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 2 from the DUT") |
| |
| ] |
| |
| @staticmethod |
| def should_run_SWTCH_2_5(wildcard, endpoint): |
| msm = has_feature(Clusters.Switch, Clusters.Switch.Bitmaps.Feature.kMomentarySwitchMultiPress) |
| asf = has_feature(Clusters.Switch, Clusters.Switch.Bitmaps.Feature.kActionSwitch) |
| return msm(wildcard, endpoint) and not asf(wildcard, endpoint) |
| |
| @run_if_endpoint_matches(should_run_SWTCH_2_5) |
| async def test_TC_SWTCH_2_5(self): |
| # Commissioning - already done |
| self.step(1) |
| |
| cluster = Clusters.Switch |
| feature_map = await self.read_single_attribute_check_success(cluster, attribute=cluster.Attributes.FeatureMap) |
| has_msl_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitchLongPress) |
| has_msr_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitchRelease) |
| multi_press_max = await self.read_single_attribute_check_success(cluster, attribute=cluster.Attributes.MultiPressMax) |
| |
| endpoint_id = self.matter_test_config.endpoint |
| pressed_position = self._default_pressed_position |
| |
| self.step(2) |
| event_listener = EventChangeCallback(cluster) |
| await event_listener.start(self.default_controller, self.dut_node_id, endpoint=endpoint_id) |
| |
| self.step(3) |
| self._ask_for_switch_idle(endpoint_id) |
| |
| def test_multi_press_sequence(starting_step: str, count: int, short_long: bool = False): |
| step = starting_step |
| self.step(step) |
| |
| if short_long: |
| self._ask_for_multi_press_short_long(endpoint_id, pressed_position, |
| feature_map=feature_map, multi_press_max=multi_press_max) |
| else: |
| self._ask_for_multi_press(endpoint_id, number_of_presses=count, pressed_position=pressed_position, |
| feature_map=feature_map, multi_press_max=multi_press_max) |
| for pos_idx in range(count): |
| event = event_listener.wait_for_event_report(cluster.Events.InitialPress) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on InitialEvent") |
| if pos_idx > 0: |
| event = event_listener.wait_for_event_report(cluster.Events.MultiPressOngoing) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on MultiPressOngoing") |
| asserts.assert_equal(event.currentNumberOfPressesCounted, pos_idx + 1, |
| "Unexpected CurrentNumberOfPressesCounted on MultiPressOngoing") |
| if has_msr_feature: |
| event = event_listener.wait_for_event_report(cluster.Events.ShortRelease) |
| asserts.assert_equal(event.previousPosition, pressed_position, "Unexpected PreviousPosition on ShortRelease") |
| |
| step = bump_substep(step) |
| self.step(step) |
| self._ask_for_switch_idle(endpoint_id, omit_for_simulator=True) |
| event = event_listener.wait_for_event_report(cluster.Events.MultiPressComplete) |
| asserts.assert_equal(event.previousPosition, pressed_position, "Unexpected PreviousPosition on MultiPressComplete") |
| asserts.assert_equal(event.totalNumberOfPressesCounted, count, "Unexpected count on MultiPressComplete") |
| |
| test_multi_press_sequence("4a", count=1) |
| |
| test_multi_press_sequence("5a", count=2) |
| |
| self.step("6a") |
| multi_press_max = await self.read_single_attribute_check_success(cluster=cluster, attribute=cluster.Attributes.MultiPressMax) |
| if multi_press_max == 2: |
| self.skip_step("6b") |
| self.skip_step("6c") |
| else: |
| test_multi_press_sequence("6b", count=3) |
| |
| if not has_msl_feature: |
| self.skip_all_remaining_steps(7) |
| return |
| |
| self.step(7) |
| # subscription is already set up |
| |
| test_multi_press_sequence("8a", count=2, short_long=True) |
| |
| self.step("9a") |
| self._ask_for_multi_press_long_short(endpoint_id, pressed_position, feature_map) |
| |
| event = event_listener.wait_for_event_report(cluster.Events.InitialPress) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on InitialEvent") |
| event = event_listener.wait_for_event_report(cluster.Events.LongPress) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on LongPress") |
| event = event_listener.wait_for_event_report(cluster.Events.LongRelease) |
| asserts.assert_equal(event.previousPosition, pressed_position, "Unexpected PreviousPosition on LongRelease") |
| if self._use_button_simulator(): |
| # simulator can't sequence so we need to help it along here |
| self._send_multi_press_named_pipe_command(endpoint_id, number_of_presses=1, |
| pressed_position=1, feature_map=feature_map, multi_press_max=multi_press_max) |
| |
| event = event_listener.wait_for_event_report(cluster.Events.InitialPress) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on InitialEvent") |
| |
| if has_msr_feature: |
| event = event_listener.wait_for_event_report(cluster.Events.ShortRelease) |
| asserts.assert_equal(event.previousPosition, pressed_position, "Unexpected PreviousPosition on ShortRelease") |
| |
| # Because this is a queue, we verify that no multipress ongoing is received by verifying that the next event is the multipress complete |
| |
| self.step("9b") |
| self._ask_for_switch_idle(endpoint_id, omit_for_simulator=True) |
| event = event_listener.wait_for_event_report(cluster.Events.MultiPressComplete) |
| asserts.assert_equal(event.previousPosition, pressed_position, "Unexpected PreviousPosition on MultiPressComplete") |
| asserts.assert_equal(event.totalNumberOfPressesCounted, 1, "Unexpected count on MultiPressComplete") |
| |
| def steps_TC_SWTCH_2_6(self): |
| return [TestStep(1, test_plan_support.commission_if_required(), is_commissioning=True), |
| TestStep(2, "Set up subscription to all Switch cluster events"), |
| TestStep(3, "Operator does not operate switch on the DUT"), |
| TestStep("4a", "Operator operates switch (press briefly) associated with position 1 on the DUT then release switch from DUT", |
| """ |
| |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH does not receive ShortRelease event from the DUT |
| """), |
| TestStep("4b", "Operator does not operate switch on the DUT", |
| "TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 1 from the DUT"), |
| TestStep("5a", "Operator repeat step 4a 2 times quickly", |
| """ |
| |
| * Verify that the TH receives InitialPress(one, not more than one) event with NewPosition set to 1 from the DUT |
| * Verify that the TH does not receive ShortRelease event from the DUT |
| * Verify that the TH does not receive MultiPressOngoing event from the DUT |
| """), |
| TestStep("5b", "Operator does not operate switch on the DUT", |
| "Verify that the TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 2 from the DUT"), |
| TestStep("6a", "Operator repeat step 4a MultiPressMax + 1(see 2c of TC-SWTCH-2.1) times quickly", |
| """ |
| |
| * Verify that the TH receives InitialPress(one, not more than one) event with NewPosition set to 1 from the DUT |
| * Verify that the TH does not receive ShortRelease event from the DUT |
| * Verify that the TH does not receive MultiPressOngoing event from the DUT |
| """ |
| ), |
| TestStep("6b", "Operator does not operate switch on the DUT", |
| "Verify that the TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 0 from the DUT"), |
| TestStep("7a", "If the switch cluster does not implement the MomentarySwitchLongPress (MSL) feature, skip the remaining steps"), |
| TestStep("7b", "Set up subscription to all Switch cluster events"), |
| TestStep("8a", |
| """ |
| Operator operates switch in below sequence: |
| 1. Operator operates switch (press briefly) associated with position 1 on the DUT then release switch from DUT |
| 2. Operator operates switch (keep pressed for long time, e.g. 5 seconds) on the DUT immediately after the previous step |
| 3. Operator releases switch from the DUT |
| """, |
| """ |
| |
| * Verify that the TH receives InitialPress(one, not more than one) event with NewPosition set to 1 from the DUT |
| * Verify that the TH does not receive ShortRelease event from the DUT |
| * Verify that the TH does not receive MultiPressOngoing event from the DUT |
| * Verify that the TH does not receive LongPress event from the DUT |
| * Verify that the TH does not receive LongRelease event from the DUT |
| """), |
| TestStep("8b", "Operator does not operate switch on the DUT", |
| "TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 2 from the DUT"), |
| TestStep("9a", |
| """ |
| Operator operates switch in below sequence: |
| |
| 1. Operator operates switch (keep pressed for long time, e.g. 5 seconds) on the DUT |
| 2. Operator releases switch from the DUT |
| 3. Immediately after the previous step complete, Operator operates switch (press briefly) associated with position 1 on the DUT then release switch from DUT |
| """, |
| """ |
| |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives (one, not more than one) LongPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH receives LongRelease event with PreviousPosition set to 1 from the DUT |
| * Verify that the TH receives InitialPress event with NewPosition set to 1 from the DUT |
| * Verify that the TH does not receive MultiPressOngoing event from the DUT |
| * Verify that the TH does not receive ShortRelease event from the DUT |
| |
| The events sequence from the subscription SHALL follow the same sequence as expressed above, in the exact order of events specified. |
| """), |
| TestStep("9b", "Operator does not operate switch on the DUT" |
| "Verify that the TH receives MultiPressComplete event with PreviousPosition set to 1 and TotalNumberOfPressesCounted set to 1 from the DUT"), |
| ] |
| |
| @staticmethod |
| def should_run_SWTCH_2_6(wildcard, endpoint): |
| msm = has_feature(Clusters.Switch, Clusters.Switch.Bitmaps.Feature.kMomentarySwitchMultiPress) |
| asf = has_feature(Clusters.Switch, 0x20) |
| return msm(wildcard, endpoint) and asf(wildcard, endpoint) |
| |
| @run_if_endpoint_matches(should_run_SWTCH_2_6) |
| async def test_TC_SWTCH_2_6(self): |
| # Commissioning - already done |
| self.step(1) |
| |
| cluster = Clusters.Switch |
| feature_map = await self.read_single_attribute_check_success(cluster, attribute=cluster.Attributes.FeatureMap) |
| has_msl_feature = (feature_map & cluster.Bitmaps.Feature.kMomentarySwitchLongPress) |
| multi_press_max = await self.read_single_attribute_check_success(cluster, attribute=cluster.Attributes.MultiPressMax) |
| |
| endpoint_id = self.matter_test_config.endpoint |
| pressed_position = self._default_pressed_position |
| |
| self.step(2) |
| event_listener = EventChangeCallback(cluster) |
| await event_listener.start(self.default_controller, self.dut_node_id, endpoint=endpoint_id) |
| |
| self.step(3) |
| self._ask_for_switch_idle(endpoint_id) |
| |
| def test_multi_press_sequence(starting_step: str, count: int, short_long: bool = False): |
| step = starting_step |
| self.step(step) |
| |
| if short_long: |
| self._ask_for_multi_press_short_long(endpoint_id, pressed_position, |
| feature_map=feature_map, multi_press_max=multi_press_max) |
| else: |
| self._ask_for_multi_press(endpoint_id, number_of_presses=count, pressed_position=pressed_position, |
| feature_map=feature_map, multi_press_max=multi_press_max) |
| |
| event = event_listener.wait_for_event_report(cluster.Events.InitialPress) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on InitialEvent") |
| |
| step = bump_substep(step) |
| self.step(step) |
| self._ask_for_switch_idle(endpoint_id, omit_for_simulator=True) |
| event = event_listener.wait_for_event_report(cluster.Events.MultiPressComplete) |
| asserts.assert_equal(event.previousPosition, pressed_position, "Unexpected PreviousPosition on MultiPressComplete") |
| expected_count = 0 if count > multi_press_max else count |
| asserts.assert_equal(event.totalNumberOfPressesCounted, expected_count, "Unexpected count on MultiPressComplete") |
| |
| test_multi_press_sequence("4a", count=1) |
| |
| test_multi_press_sequence("5a", count=2) |
| |
| test_multi_press_sequence("6a", count=(multi_press_max + 1)) |
| |
| self.step("7a") |
| if not has_msl_feature: |
| self.skip_all_remaining_steps("7b") |
| return |
| |
| # subscription is already established |
| self.step("7b") |
| |
| test_multi_press_sequence("8a", count=2, short_long=True) |
| |
| self.step("9a") |
| self._ask_for_multi_press_long_short(endpoint_id, pressed_position, feature_map) |
| |
| event = event_listener.wait_for_event_report(cluster.Events.InitialPress) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on InitialEvent") |
| event = event_listener.wait_for_event_report(cluster.Events.LongPress) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on LongPress") |
| event = event_listener.wait_for_event_report(cluster.Events.LongRelease) |
| asserts.assert_equal(event.previousPosition, pressed_position, "Unexpected PreviousPosition on LongRelease") |
| if self._use_button_simulator(): |
| # simulator can't sequence so we need to help it along here |
| self._send_multi_press_named_pipe_command(endpoint_id, number_of_presses=1, |
| pressed_position=1, feature_map=feature_map, multi_press_max=multi_press_max) |
| |
| event = event_listener.wait_for_event_report(cluster.Events.InitialPress) |
| asserts.assert_equal(event.newPosition, pressed_position, "Unexpected NewPosition on InitialEvent") |
| |
| # Verify that we don't receive the multi-press ongoing or short release by verifying that the next event in the sequence is the multi-press complete |
| self.step("9b") |
| self._ask_for_switch_idle(endpoint_id, omit_for_simulator=True) |
| event = event_listener.wait_for_event_report(cluster.Events.MultiPressComplete) |
| asserts.assert_equal(event.previousPosition, pressed_position, "Unexpected PreviousPosition on MultiPressComplete") |
| asserts.assert_equal(event.totalNumberOfPressesCounted, 1, "Unexpected count on MultiPressComplete") |
| |
| |
| if __name__ == "__main__": |
| default_matter_test_main() |
