blob: d0cdc696f0e832c60ef865399844978e33d3fbd6 [file] [log] [blame]
/*
*
* Copyright (c) 2020 Project CHIP Authors
* All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/* Modules */
var AESCCM = scripting.addModule("/ti/drivers/AESCCM");
var AESECB = scripting.addModule("/ti/drivers/AESECB");
var Button = scripting.addModule("/ti/drivers/apps/Button");
var LED = scripting.addModule("/ti/drivers/apps/LED");
var NVS = scripting.addModule("/ti/drivers/NVS");
var RF = scripting.addModule("/ti/drivers/RF");
var RFDesign = scripting.addModule("ti/devices/radioconfig/rfdesign");
var RFCustom = scripting.addModule("/ti/devices/radioconfig/custom");
var TRNG = scripting.addModule("/ti/drivers/TRNG");
var SHA2 = scripting.addModule("/ti/drivers/SHA2");
var UART2 = scripting.addModule("/ti/drivers/UART2");
var ble = scripting.addModule("/ti/ble5stack/ble");
var dmm = scripting.addModule("/ti/dmm/dmm");
var AESCTRDRBG = scripting.addModule("/ti/drivers/AESCTRDRBG");
var ECDH = scripting.addModule("/ti/drivers/ECDH");
/* Instances */
var AESCCM1 = AESCCM.addInstance();
var AESECB1 = AESECB.addInstance();
var AESECB2 = AESECB.addInstance();
var Button1 = Button.addInstance();
var Button2 = Button.addInstance();
var NVS1 = NVS.addInstance();
var NVS2 = NVS.addInstance();
var SHA21 = SHA2.addInstance();
var LED1 = LED.addInstance();
var LED2 = LED.addInstance();
var TRNG1 = TRNG.addInstance();
var TRNG2 = TRNG.addInstance();
var TRNG3 = TRNG.addInstance();
var UART2 = UART2.addInstance();
var AESCTRDRBG1 = AESCTRDRBG.addInstance();
var ECDH1 = ECDH.addInstance();
AESCTRDRBG1.$name = "CONFIG_AESCTRDRBG_0";
AESCCM1.$name = "CONFIG_AESCCM0";
AESECB1.$name = "CONFIG_AESECB0";
AESECB2.$name = "CONFIG_AESECB_1";
ECDH1.$name = "CONFIG_ECDH0";
/* Left Button */
Button1.$name = "CONFIG_BTN_LEFT";
Button1.$hardware = system.deviceData.board.components["BTN-1"];
Button1.gpioPin.$name = "CONFIG_GPIO_BTN1";
Button1.gpioPin.pull = "Pull Up";
Button1.gpioPin.interruptTrigger = "Falling Edge";
/* Left Button */
Button2.$name = "CONFIG_BTN_RIGHT";
Button2.$hardware = system.deviceData.board.components["BTN-2"];
Button2.gpioPin.$name = "CONFIG_GPIO_BTN2";
Button2.gpioPin.pull = "Pull Up";
Button2.gpioPin.interruptTrigger = "Falling Edge";
/* ======== CCFG ======== */
var CCFG = scripting.addModule("/ti/devices/CCFG");
const ccfgSettings = system.getScript("/ti/common/lprf_ccfg_settings.js").ccfgSettings;
for(var setting in ccfgSettings)
{
CCFG[setting] = ccfgSettings[setting];
}
/* disable CCFG for OTA-able application */
CCFG.enableCodeGeneration = false;
/* NVS */
NVS1.$name = "CONFIG_NVSINTERNAL";
NVS1.internalFlash.regionBase = 0xFB800;
NVS1.internalFlash.regionSize = 0x2800;
NVS2.$name = "CONFIG_NVSEXTERNAL";
NVS2.nvsType = "External"; // NVS Region Type
NVS2.$hardware = system.deviceData.board.components.MX25R8035F;
/* RF */
/* if an antenna component exists, assign it to the rf instance */
if (system.deviceData.board && system.deviceData.board.components.RF) {
RF.$hardware = system.deviceData.board.components.RF;
}
const rfDesignSettings = system.getScript("/ti/common/lprf_rf_design_settings.js").rfDesignSettings;
for(var setting in rfDesignSettings)
{
RFDesign[setting] = rfDesignSettings[setting];
}
/* Handling for RF frontend characterization */
if(RFDesign.rfDesign.match(/LP_CC2652PSIP/))
{
RFCustom.ieee = ["ieee154p10"];
var rfCodeExportConfig = RFCustom.radioConfigieee154p10.codeExportConfig
}
else
{
RFCustom.ieee = ["ieee154"];
var rfCodeExportConfig = RFCustom.radioConfigieee154.codeExportConfig
}
var cmdList = [
"cmdIeeeTx",
"cmdIeeeRx",
"cmdIeeeCsma",
"cmdIeeeEdScan",
"cmdIeeeRxAck",
"cmdTxTest"
];
rfCodeExportConfig.useConst = true;
rfCodeExportConfig.useMulti = true;
rfCodeExportConfig.symGenMethod = "Custom";
const deviceId = system.deviceData.deviceId;
// Add high PA options if present
if(deviceId.match(/CC(265[12]R|2674R|1352R1|1354R)/))
{
cmdList.push("cmdRadioSetup");
rfCodeExportConfig.cmdRadioSetup = "RF_cmdIeeeRadioSetup";
}
else if(deviceId.match(/CC(265[12]P|2674P|1352P)/))
{
cmdList.push("cmdRadioSetupPa");
rfCodeExportConfig.cmdRadioSetupPa = "RF_cmdIeeeRadioSetup";
rfCodeExportConfig.paExport = "combined";
}
else if(deviceId.match(/CC(265[34]|1354)P/))
{
cmdList.push("cmdRadioSetupPa");
rfCodeExportConfig.cmdRadioSetupPa = "RF_cmdIeeeRadioSetup";
// currently not characterized for high PA
}
else
{
throw new Error("Could not match platform to any known platform types");
}
rfCodeExportConfig.cmdList_ieee_15_4 = cmdList;
/* Red LED */
LED1.$name = "CONFIG_LED_RED";
LED1.$hardware = system.deviceData.board.components.LED_RED;
LED1.gpioPin.$name = "CONFIG_GPIO_RLED";
LED1.gpioPin.mode = "Output";
/* Green LED */
LED2.$name = "CONFIG_LED_GREEN";
LED2.$hardware = system.deviceData.board.components.LED_GREEN;
LED2.gpioPin.$name = "CONFIG_GPIO_GLED";
LED2.gpioPin.mode = "Output";
/* Debug UART */
UART2.$hardware = system.deviceData.board.components.XDS110UART;
UART2.$name = "CONFIG_UART2_DEBUG";
/* TRNG */
TRNG1.$name = "CONFIG_TRNG_0";
TRNG2.$name = "CONFIG_TRNG_THREAD";
TRNG3.$name = "CONFIG_TRNG_APP";
/* BLE */
ble.addressMode = "ADDRMODE_RP_WITH_PUBLIC_ID";
ble.maxConnNum = 1;
ble.numOfAdvSets = 1;
ble.lockProject = true;
ble.oneLibSizeOpt = true;
ble.maxPDUSize = 255;
ble.radioConfig.codeExportConfig.$name = "ti_devices_radioconfig_code_export_param1";
ble.connUpdateParamsPeripheral.$name = "ti_ble5stack_general_ble_conn_update_params0";
ble.connUpdateParamsPeripheral.reqMinConnInt = 30;
ble.connUpdateParamsPeripheral.reqMaxConnInt = 50;
ble.advSet1.$name = "ti_ble5stack_broadcaster_advertisement_set0";
ble.advSet1.advParam1.$name = "ti_ble5stack_broadcaster_advertisement_params0";
ble.rfDesign = "LP_EM_CC1354P10_6";
ble.thorPg = 2;
/* DMM */
dmm.project = "ti_thread_thermostat_remote_display";
dmm.stackRoles = ["blePeripheral","threadFTD"];
dmm.lockStackRoles = true;
dmm.numApplicationStates = 10;
dmm.applicationState0 = "ANY";
dmm.applicationState1 = "DMMPOLICY_BLE_IDLE";
dmm.applicationState2 = "DMMPOLICY_BLE_ADV";
dmm.applicationState3 = "DMMPOLICY_BLE_CONNECTING";
dmm.applicationState4 = "DMMPOLICY_BLE_HIGH_BANDWIDTH";
dmm.applicationState5 = "DMMPOLICY_BLE_CONNECTED";
dmm.applicationState6 = "DMMPOLICY_BLE_OAD";
dmm.applicationState7 = "DMMPOLICY_THREAD_IDLE";
dmm.applicationState8 = "DMMPOLICY_THREAD_LINK_EST";
dmm.applicationState9 = "DMMPOLICY_THREAD_DATA";
dmm.policyArray.create(4);
dmm.policyArray[0].$name = "ti_dmm_policy_dmm_policy0";
dmm.policyArray[0].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble0";
dmm.policyArray[0].blePeripheral.applicationStates = ["applicationState6"];
dmm.policyArray[0].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread0";
dmm.policyArray[0].threadFTD.pause = "DMMPOLICY_PAUSED";
dmm.policyArray[1].$name = "ti_dmm_policy_dmm_policy1";
dmm.policyArray[1].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble1";
dmm.policyArray[1].blePeripheral.applicationStates = ["applicationState3","applicationState4"];
dmm.policyArray[1].blePeripheral.weight = 25;
dmm.policyArray[1].blePeripheral.appliedActivity = ["DMMPOLICY_APPLIED_ACTIVITY_BLE_CONNECTION"];
dmm.policyArray[1].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread1";
dmm.policyArray[2].$name = "ti_dmm_policy_dmm_policy2";
dmm.policyArray[2].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble2";
dmm.policyArray[2].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread2";
dmm.policyArray[2].threadFTD.weight = 30;
dmm.policyArray[2].threadFTD.applicationStates = ["applicationState8"];
dmm.policyArray[2].threadFTD.appliedActivity = ["DMMPOLICY_APPLIED_ACTIVITY_ALL"];
dmm.policyArray[3].$name = "ti_dmm_policy_dmm_policy3";
dmm.policyArray[3].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble3";
dmm.policyArray[3].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread3";
dmm.policyArray[3].threadFTD.weight = 1;