blob: ca62337985d252ba465cbc835fa8d76fb4ea4d98 [file] [log] [blame]
/*
* Copyright (c) 2020 Project CHIP Authors
* Copyright (c) 2019 Google LLC.
* All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @file
* Example project configuration file for CHIP.
*
* This is a place to put application or project-specific overrides
* to the default configuration values for general CHIP features.
*
*/
#ifndef CHIP_PROJECT_CONFIG_H
#define CHIP_PROJECT_CONFIG_H
#if BUILD_RELEASE // release build
// Security and Authentication enabled for release build.
#define CHIP_CONFIG_SECURITY_TEST_MODE 0
#define CHIP_CONFIG_REQUIRE_AUTH 1
#else // development build
// Security and Authentication disabled for development build.
// For convenience, enable CHIP Security Test Mode and disable the requirement for
// authentication in various protocols.
// WARNING: These options make it possible to circumvent basic CHIP security functionality,
// including message encryption. Because of this they MUST NEVER BE ENABLED IN PRODUCTION BUILDS.
#define CHIP_CONFIG_SECURITY_TEST_MODE 0
#define CHIP_CONFIG_REQUIRE_AUTH 0
/**
* CHIP_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY
*
* Enables the use of a hard-coded default CHIP device id and credentials if no device id
* is found in CHIP NV storage.
*
* This option is for testing only and should be disabled in production releases.
*/
#define CHIP_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY 34
// Use a default pairing code if one hasn't been provisioned in flash.
#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE 20202021
#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR 0xF00
// Use a default pairing code if one hasn't been provisioned in flash.
#define CHIP_DEVICE_CONFIG_USE_TEST_PAIRING_CODE "CHIPUS"
/**
* CHIP_DEVICE_CONFIG_USE_TEST_SERIAL_NUMBER
*
* Enables the use of a hard-coded default serial number if none
* is found in CHIP NV storage.
*/
#define CHIP_DEVICE_CONFIG_USE_TEST_SERIAL_NUMBER "DUMMY_SN"
#endif // BUILD_RELEASE
/**
* CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID
*
* 0xE100: Google's Vendor Id.
*/
#define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0xFFF1
/**
* CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID
*
* 0xFE00: SDK Sample Lock Resource
*/
#define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0x8006
/**
* CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_REVISION
*
* The product revision number assigned to device or product by the device vendor. This
* number is scoped to the device product id, and typically corresponds to a revision of the
* physical device, a change to its packaging, and/or a change to its marketing presentation.
* This value is generally *not* incremented for device software revisions.
*/
#define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_REVISION 1
/**
* CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION
*
* A string identifying the firmware revision running on the device.
* CHIP currently expects the firmware version to be in the format
* {MAJOR_VERSION}.0d{MINOR_VERSION}
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION
#define CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION "1.0d1"
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
*
* Enable support for CHIP-over-BLE (CHIPOBLE).
*/
#define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 0
/**
* CHIP_CONFIG_EVENT_LOGGING_UTC_TIMESTAMPS
*
* Enable recording UTC timestamps.
*/
#define CHIP_CONFIG_EVENT_LOGGING_UTC_TIMESTAMPS 1
/**
* CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
*
* A size, in bytes, of the individual debug event logging buffer.
*/
#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE (512)
/**
* CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE
*
* For a development build, set the default importance of events to be logged as Debug.
* Since debug is the lowest importance level, this means all standard, critical, info and
* debug importance level vi events get logged.
*/
#if BUILD_RELEASE
#define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Production
#else
#define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Debug
#endif // BUILD_RELEASE
#endif // CHIP_PROJECT_CONFIG_H