blob: fbaf6d97bc226b6b42646cc09d74eee65ebb036d [file] [log] [blame]
# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
name: Door Lock Cluster Lock/Unlock tests
config:
nodeId: 0x12344321
cluster: "Door Lock"
endpoint: 1
tests:
- label: "Wait for the commissioned device to be retrieved"
cluster: "DelayCommands"
command: "WaitForCommissionee"
arguments:
values:
- name: "nodeId"
value: nodeId
- label: "Try to unlock the door without PIN"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
- label: "Verify that lock state attribute value is set to Unlocked"
command: "readAttribute"
attribute: "LockState"
response:
value: 2
- label: "Try to lock the door without a PIN"
command: "LockDoor"
timedInteractionTimeoutMs: 10000
- label: "Verify that lock state attribute value is set to Locked"
command: "readAttribute"
attribute: "LockState"
response:
value: 1
- label: "Create new PIN credential and lock/unlock user"
command: "SetCredential"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "OperationType"
value: 0
- name: "Credential"
value: { CredentialType: 1, CredentialIndex: 1 }
- name: "CredentialData"
value: "123456"
- name: "UserIndex"
value: null
- name: "UserStatus"
value: null
- name: "UserType"
value: null
response:
values:
- name: "Status"
value: 0x00
- name: "UserIndex"
value: 1
- name: "NextCredentialIndex"
value: 2
- label:
"Set the WrongCodeEntryLimit to big value so that we can test
incorrect PIN entry"
command: "writeAttribute"
attribute: "WrongCodeEntryLimit"
arguments:
value: 20
- label: "Try to unlock the door with invalid PIN"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "000000"
response:
error: FAILURE
- label: "Verify that lock state attribute value is set to Locked"
command: "readAttribute"
attribute: "LockState"
response:
value: 1
- label: "Try to unlock the door with valid PIN"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "123456"
- label: "Verify that lock state attribute value is set to Unlocked"
command: "readAttribute"
attribute: "LockState"
response:
value: 2
- label: "Try to lock the door with invalid PIN"
command: "LockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "000000"
response:
error: FAILURE
- label: "Verify that lock state attribute value is set to Unlocked"
command: "readAttribute"
attribute: "LockState"
response:
value: 2
- label: "Try to lock the door with valid PIN"
command: "LockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "123456"
- label: "Verify that lock state attribute value is set to Locked"
command: "readAttribute"
attribute: "LockState"
response:
value: 1
- label: "Set OperatingMode to NoRemoteLockUnlock"
command: "writeAttribute"
attribute: "OperatingMode"
arguments:
value: 3
- label: "Try to unlock the door when OperatingMode is NoRemoteLockUnlock"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
response:
error: FAILURE
- label: "Set OperatingMode to Normal"
command: "writeAttribute"
attribute: "OperatingMode"
arguments:
value: 0
- label: "Read the lockout timeout"
command: "readAttribute"
attribute: "UserCodeTemporaryDisableTime"
response:
value: 10
- label: "Set the WrongCodeEntryLimit to small value so we can test lockout"
command: "writeAttribute"
attribute: "WrongCodeEntryLimit"
arguments:
value: 3
- label: "Try to unlock the door with invalid PIN for the first time"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "000000"
response:
error: FAILURE
- label: "Try to unlock the door with invalid PIN for the second time"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "000000"
response:
error: FAILURE
- label: "Try to unlock the door with invalid PIN for the third time"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "000000"
response:
error: FAILURE
- label:
"Try to unlock the door with valid PIN and make sure it fails due to
lockout"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "123456"
response:
error: FAILURE
- label: "Wait for the lockout to end"
cluster: "DelayCommands"
command: "WaitForMs"
# We know the lockout value, but it's in seconds. Previous read from UserCodeTemporaryDisableTime verified that
# the lockout time is 10 seconds, so we can just put 10000ms here.
arguments:
values:
- name: "ms"
value: 10000
- label: "Try to unlock the door with valid PIN and make sure it succeeds"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "123456"
- label: "Verify that lock state attribute value is set to Unlocked"
command: "readAttribute"
attribute: "LockState"
response:
value: 2
- label: "Lock the door back prior to next tests"
command: "LockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "123456"
- label: "Create a disabled user and credential"
command: "SetCredential"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "OperationType"
value: 0
- name: "Credential"
value: { CredentialType: 1, CredentialIndex: 2 }
- name: "CredentialData"
value: "654321"
- name: "UserIndex"
value: null
- name: "UserStatus"
value: 3
- name: "UserType"
value: null
response:
values:
- name: "Status"
value: 0x00
- name: "UserIndex"
value: 2
- name: "NextCredentialIndex"
value: 3
- label: "Try to unlock the door with disabled user PIN"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "654321"
response:
error: FAILURE
- label: "Verify that lock state attribute value is set to Locked"
command: "readAttribute"
attribute: "LockState"
response:
value: 1
- label: "Unlock the door with enabled user PIN"
command: "UnlockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "123456"
- label: "Verify that lock state attribute value is set to Unlocked"
command: "readAttribute"
attribute: "LockState"
response:
value: 2
- label: "Try to lock the door with disabled user PIN"
command: "LockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "654321"
response:
error: FAILURE
- label: "Verify that lock state attribute value stays Unlocked"
command: "readAttribute"
attribute: "LockState"
response:
value: 2
- label: "Lock the door with enabled user PIN"
command: "LockDoor"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "PINCode"
value: "123456"
- label: "Verify that lock state attribute value is set to Locked"
command: "readAttribute"
attribute: "LockState"
response:
value: 1
# Clean-up
- label: "Clean all the users and credentials"
command: "ClearUser"
timedInteractionTimeoutMs: 10000
arguments:
values:
- name: "UserIndex"
value: 0xFFFE