| /* |
| * |
| * Copyright (c) 2021-2022 Project CHIP Authors |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <platform/CHIPDeviceLayer.h> |
| #include <platform/PlatformManager.h> |
| |
| #include <app/InteractionModelEngine.h> |
| #include <app/clusters/network-commissioning/network-commissioning.h> |
| #include <app/server/Dnssd.h> |
| #include <app/server/OnboardingCodesUtil.h> |
| #include <app/server/Server.h> |
| #include <app/util/endpoint-config-api.h> |
| #include <crypto/CHIPCryptoPAL.h> |
| #include <lib/core/CHIPError.h> |
| #include <lib/core/NodeId.h> |
| #include <lib/core/Optional.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| |
| #include <credentials/DeviceAttestationCredsProvider.h> |
| #include <credentials/attestation_verifier/DefaultDeviceAttestationVerifier.h> |
| #include <credentials/attestation_verifier/DeviceAttestationVerifier.h> |
| |
| #include <lib/support/CHIPMem.h> |
| #include <lib/support/ScopedBuffer.h> |
| #include <lib/support/TestGroupData.h> |
| #include <setup_payload/QRCodeSetupPayloadGenerator.h> |
| #include <setup_payload/SetupPayload.h> |
| |
| #include <platform/CommissionableDataProvider.h> |
| #include <platform/DiagnosticDataProvider.h> |
| #include <platform/RuntimeOptionsProvider.h> |
| |
| #include <DeviceInfoProviderImpl.h> |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| #include "CommissionerMain.h" |
| #include <ControllerShellCommands.h> |
| #include <controller/CHIPDeviceControllerFactory.h> |
| #include <controller/ExampleOperationalCredentialsIssuer.h> |
| #include <lib/core/CHIPPersistentStorageDelegate.h> |
| #include <platform/KeyValueStoreManager.h> |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| |
| #if defined(ENABLE_CHIP_SHELL) |
| #include <CommissioneeShellCommands.h> |
| #include <lib/shell/Engine.h> // nogncheck |
| #include <thread> |
| #endif |
| |
| #if defined(PW_RPC_ENABLED) |
| #include <Rpc.h> |
| #endif |
| |
| #if CHIP_CONFIG_TRANSPORT_TRACE_ENABLED |
| #include "TraceDecoder.h" |
| #include "TraceHandlers.h" |
| #endif // CHIP_CONFIG_TRANSPORT_TRACE_ENABLED |
| |
| #if ENABLE_TRACING |
| #include <TracingCommandLineArgument.h> // nogncheck |
| #endif |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_OTA_REQUESTOR |
| #include <app/clusters/ota-requestor/OTATestEventTriggerHandler.h> |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_SMOKE_CO_TRIGGER |
| #include <app/clusters/smoke-co-alarm-server/SmokeCOTestEventTriggerHandler.h> |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_BOOLEAN_STATE_CONFIGURATION_TRIGGER |
| #include <app/clusters/boolean-state-configuration-server/BooleanStateConfigurationTestEventTriggerHandler.h> |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_ENERGY_EVSE_TRIGGER |
| #include <app/clusters/energy-evse-server/EnergyEvseTestEventTriggerHandler.h> |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_ENERGY_REPORTING_TRIGGER |
| #include <app/clusters/electrical-energy-measurement-server/EnergyReportingTestEventTriggerHandler.h> |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_WATER_HEATER_MANAGEMENT_TRIGGER |
| #include <app/clusters/water-heater-management-server/WaterHeaterManagementTestEventTriggerHandler.h> |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_DEVICE_ENERGY_MANAGEMENT_TRIGGER |
| #include <app/clusters/device-energy-management-server/DeviceEnergyManagementTestEventTriggerHandler.h> |
| #endif |
| #include <app/TestEventTriggerDelegate.h> |
| |
| #include <signal.h> |
| |
| #include "AppMain.h" |
| #include "CommissionableInit.h" |
| |
| #if CHIP_CONFIG_USE_ACCESS_RESTRICTIONS |
| #include "ExampleAccessRestrictionProvider.h" |
| #endif |
| |
| #if CHIP_DEVICE_LAYER_TARGET_DARWIN |
| #include <platform/Darwin/NetworkCommissioningDriver.h> |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFI |
| #include <platform/Darwin/WiFi/NetworkCommissioningWiFiDriver.h> |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_WIFI |
| #endif // CHIP_DEVICE_LAYER_TARGET_DARWIN |
| |
| #if CHIP_DEVICE_LAYER_TARGET_LINUX |
| #include <platform/Linux/NetworkCommissioningDriver.h> |
| #endif // CHIP_DEVICE_LAYER_TARGET_LINUX |
| |
| using namespace chip; |
| using namespace chip::ArgParser; |
| using namespace chip::Credentials; |
| using namespace chip::DeviceLayer; |
| using namespace chip::Inet; |
| using namespace chip::Transport; |
| using namespace chip::app::Clusters; |
| using namespace chip::Access; |
| |
| // Network comissioning implementation |
| namespace { |
| // If secondaryNetworkCommissioningEndpoint has a value and both Thread and WiFi |
| // are enabled, we put the WiFi network commissioning cluster on |
| // secondaryNetworkCommissioningEndpoint. |
| Optional<EndpointId> sSecondaryNetworkCommissioningEndpoint; |
| |
| #if CHIP_DEVICE_LAYER_TARGET_LINUX |
| #if CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| #define CHIP_APP_MAIN_HAS_THREAD_DRIVER 1 |
| DeviceLayer::NetworkCommissioning::LinuxThreadDriver sThreadDriver; |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFI |
| #define CHIP_APP_MAIN_HAS_WIFI_DRIVER 1 |
| DeviceLayer::NetworkCommissioning::LinuxWiFiDriver sWiFiDriver; |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_WIFI |
| |
| #define CHIP_APP_MAIN_HAS_ETHERNET_DRIVER 1 |
| DeviceLayer::NetworkCommissioning::LinuxEthernetDriver sEthernetDriver; |
| #endif // CHIP_DEVICE_LAYER_TARGET_LINUX |
| |
| #if CHIP_DEVICE_LAYER_TARGET_DARWIN |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFI |
| #define CHIP_APP_MAIN_HAS_WIFI_DRIVER 1 |
| DeviceLayer::NetworkCommissioning::DarwinWiFiDriver sWiFiDriver; |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_WIFI |
| |
| #define CHIP_APP_MAIN_HAS_ETHERNET_DRIVER 1 |
| DeviceLayer::NetworkCommissioning::DarwinEthernetDriver sEthernetDriver; |
| #endif // CHIP_DEVICE_LAYER_TARGET_DARWIN |
| |
| #ifndef CHIP_APP_MAIN_HAS_THREAD_DRIVER |
| #define CHIP_APP_MAIN_HAS_THREAD_DRIVER 0 |
| #endif // CHIP_APP_MAIN_HAS_THREAD_DRIVER |
| |
| #ifndef CHIP_APP_MAIN_HAS_WIFI_DRIVER |
| #define CHIP_APP_MAIN_HAS_WIFI_DRIVER 0 |
| #endif // CHIP_APP_MAIN_HAS_WIFI_DRIVER |
| |
| #ifndef CHIP_APP_MAIN_HAS_ETHERNET_DRIVER |
| #define CHIP_APP_MAIN_HAS_ETHERNET_DRIVER 0 |
| #endif // CHIP_APP_MAIN_HAS_ETHERNET_DRIVER |
| |
| #if CHIP_APP_MAIN_HAS_THREAD_DRIVER |
| app::Clusters::NetworkCommissioning::Instance sThreadNetworkCommissioningInstance(kRootEndpointId, &sThreadDriver); |
| #endif // CHIP_APP_MAIN_HAS_THREAD_DRIVER |
| |
| #if CHIP_APP_MAIN_HAS_WIFI_DRIVER |
| // The WiFi network commissioning instance cannot be constructed until we know |
| // whether we have an sSecondaryNetworkCommissioningEndpoint. |
| Optional<app::Clusters::NetworkCommissioning::Instance> sWiFiNetworkCommissioningInstance; |
| #endif // CHIP_APP_MAIN_HAS_WIFI_DRIVER |
| |
| #if CHIP_APP_MAIN_HAS_ETHERNET_DRIVER |
| app::Clusters::NetworkCommissioning::Instance sEthernetNetworkCommissioningInstance(kRootEndpointId, &sEthernetDriver); |
| #endif // CHIP_APP_MAIN_HAS_ETHERNET_DRIVER |
| |
| #if CHIP_CONFIG_USE_ACCESS_RESTRICTIONS |
| auto exampleAccessRestrictionProvider = std::make_unique<ExampleAccessRestrictionProvider>(); |
| #endif |
| |
| void EnableThreadNetworkCommissioning() |
| { |
| #if CHIP_APP_MAIN_HAS_THREAD_DRIVER |
| sThreadNetworkCommissioningInstance.Init(); |
| #endif // CHIP_APP_MAIN_HAS_THREAD_DRIVER |
| } |
| |
| void EnableWiFiNetworkCommissioning(EndpointId endpoint) |
| { |
| #if CHIP_APP_MAIN_HAS_WIFI_DRIVER |
| sWiFiNetworkCommissioningInstance.Emplace(endpoint, &sWiFiDriver); |
| sWiFiNetworkCommissioningInstance.Value().Init(); |
| #endif // CHIP_APP_MAIN_HAS_WIFI_DRIVER |
| } |
| |
| void InitNetworkCommissioning() |
| { |
| if (sSecondaryNetworkCommissioningEndpoint.HasValue()) |
| { |
| // Enable secondary endpoint only when we need it, this should be applied to all platforms. |
| emberAfEndpointEnableDisable(sSecondaryNetworkCommissioningEndpoint.Value(), false); |
| } |
| |
| bool isThreadEnabled = false; |
| #if CHIP_APP_MAIN_HAS_THREAD_DRIVER |
| isThreadEnabled = LinuxDeviceOptions::GetInstance().mThread; |
| #endif // CHIP_APP_MAIN_HAS_THREAD_DRIVER |
| |
| bool isWiFiEnabled = false; |
| #if CHIP_APP_MAIN_HAS_WIFI_DRIVER |
| isWiFiEnabled = LinuxDeviceOptions::GetInstance().mWiFi; |
| |
| // On Linux, command-line indicates whether Wi-Fi is supported since determining it from |
| // the OS level is not easily portable. |
| #if CHIP_DEVICE_LAYER_TARGET_LINUX |
| sWiFiDriver.Set5gSupport(LinuxDeviceOptions::GetInstance().wifiSupports5g); |
| #endif // CHIP_DEVICE_LAYER_TARGET_LINUX |
| |
| #endif // CHIP_APP_MAIN_HAS_WIFI_DRIVER |
| |
| if (isThreadEnabled && isWiFiEnabled) |
| { |
| if (sSecondaryNetworkCommissioningEndpoint.HasValue()) |
| { |
| EnableThreadNetworkCommissioning(); |
| EnableWiFiNetworkCommissioning(sSecondaryNetworkCommissioningEndpoint.Value()); |
| // Only enable secondary endpoint for network commissioning cluster when both WiFi and Thread are enabled. |
| emberAfEndpointEnableDisable(sSecondaryNetworkCommissioningEndpoint.Value(), true); |
| } |
| else |
| { |
| // Just use the Thread one. |
| EnableThreadNetworkCommissioning(); |
| } |
| } |
| else if (isThreadEnabled) |
| { |
| EnableThreadNetworkCommissioning(); |
| } |
| else if (isWiFiEnabled) |
| { |
| EnableWiFiNetworkCommissioning(kRootEndpointId); |
| } |
| else |
| { |
| #if CHIP_APP_MAIN_HAS_ETHERNET_DRIVER |
| sEthernetNetworkCommissioningInstance.Init(); |
| #endif // CHIP_APP_MAIN_HAS_ETHERNET_DRIVER |
| } |
| } |
| } // anonymous namespace |
| |
| #if defined(ENABLE_CHIP_SHELL) |
| using chip::Shell::Engine; |
| #endif |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA && CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION |
| /* |
| * The device shall check every kWiFiStartCheckTimeUsec whether Wi-Fi management |
| * has been fully initialized. If after kWiFiStartCheckAttempts Wi-Fi management |
| * still hasn't been initialized, the device configuration is reset, and device |
| * needs to be paired again. |
| */ |
| static constexpr useconds_t kWiFiStartCheckTimeUsec = WIFI_START_CHECK_TIME_USEC; |
| static constexpr uint8_t kWiFiStartCheckAttempts = WIFI_START_CHECK_ATTEMPTS; |
| #endif |
| |
| namespace { |
| AppMainLoopImplementation * gMainLoopImplementation = nullptr; |
| |
| // To hold SPAKE2+ verifier, discriminator, passcode |
| LinuxCommissionableDataProvider gCommissionableDataProvider; |
| |
| chip::DeviceLayer::DeviceInfoProviderImpl gExampleDeviceInfoProvider; |
| |
| void EventHandler(const DeviceLayer::ChipDeviceEvent * event, intptr_t arg) |
| { |
| (void) arg; |
| if (event->Type == DeviceLayer::DeviceEventType::kCHIPoBLEConnectionEstablished) |
| { |
| ChipLogProgress(DeviceLayer, "Receive kCHIPoBLEConnectionEstablished"); |
| } |
| else if ((event->Type == chip::DeviceLayer::DeviceEventType::kInternetConnectivityChange)) |
| { |
| // Restart the server on connectivity change |
| app::DnssdServer::Instance().StartServer(); |
| } |
| } |
| |
| void Cleanup() |
| { |
| #if CHIP_CONFIG_TRANSPORT_TRACE_ENABLED |
| chip::trace::DeInitTrace(); |
| #endif // CHIP_CONFIG_TRANSPORT_TRACE_ENABLED |
| |
| // TODO(16968): Lifecycle management of storage-using components like GroupDataProvider, etc |
| } |
| |
| // TODO(#20664) REPL test will fail if signal SIGINT is not caught, temporarily keep following logic. |
| |
| // when the shell is enabled, don't intercept signals since it prevents the user from |
| // using expected commands like CTRL-C to quit the application. (see issue #17845) |
| // We should stop using signals for those faults, and move to a different notification |
| // means, like a pipe. (see issue #19114) |
| #if !defined(ENABLE_CHIP_SHELL) |
| void StopSignalHandler(int signal) |
| { |
| if (gMainLoopImplementation != nullptr) |
| { |
| gMainLoopImplementation->SignalSafeStopMainLoop(); |
| } |
| else |
| { |
| Server::GetInstance().GenerateShutDownEvent(); |
| PlatformMgr().ScheduleWork([](intptr_t) { PlatformMgr().StopEventLoopTask(); }); |
| } |
| } |
| #endif // !defined(ENABLE_CHIP_SHELL) |
| |
| } // namespace |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA && CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION |
| static bool EnsureWiFiIsStarted() |
| { |
| for (int cnt = 0; cnt < kWiFiStartCheckAttempts; cnt++) |
| { |
| if (DeviceLayer::ConnectivityMgrImpl().IsWiFiManagementStarted()) |
| { |
| return true; |
| } |
| |
| usleep(kWiFiStartCheckTimeUsec); |
| } |
| |
| return DeviceLayer::ConnectivityMgrImpl().IsWiFiManagementStarted(); |
| } |
| #endif |
| |
| class SampleTestEventTriggerHandler : public TestEventTriggerHandler |
| { |
| /// NOTE: If you copy this for NON-STANDARD CLUSTERS OR USAGES, please use the reserved range FFFF_FFFF_<VID_HEX>_xxxx for your |
| /// trigger codes. NOTE: Standard codes are <CLUSTER_ID_HEX>_xxxx_xxxx_xxxx. |
| static constexpr uint64_t kSampleTestEventTriggerAlwaysSuccess = static_cast<uint64_t>(0xFFFF'FFFF'FFF1'0000ull); |
| |
| public: |
| CHIP_ERROR HandleEventTrigger(uint64_t eventTrigger) override |
| { |
| ChipLogProgress(Support, "Saw TestEventTrigger: " ChipLogFormatX64, ChipLogValueX64(eventTrigger)); |
| |
| if (eventTrigger == kSampleTestEventTriggerAlwaysSuccess) |
| { |
| // Do nothing, successfully |
| ChipLogProgress(Support, "Handling \"Always success\" internal test event"); |
| return CHIP_NO_ERROR; |
| } |
| |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| }; |
| |
| int ChipLinuxAppInit(int argc, char * const argv[], OptionSet * customOptions, |
| const Optional<EndpointId> secondaryNetworkCommissioningEndpoint) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| #if CONFIG_NETWORK_LAYER_BLE |
| RendezvousInformationFlags rendezvousFlags = RendezvousInformationFlag::kBLE; |
| #else // CONFIG_NETWORK_LAYER_BLE |
| RendezvousInformationFlags rendezvousFlags = RendezvousInformationFlag::kOnNetwork; |
| #endif // CONFIG_NETWORK_LAYER_BLE |
| |
| #ifdef CONFIG_RENDEZVOUS_MODE |
| rendezvousFlags = static_cast<RendezvousInformationFlags>(CONFIG_RENDEZVOUS_MODE); |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFIPAF |
| rendezvousFlags.Set(RendezvousInformationFlag::kWiFiPAF); |
| #endif |
| |
| err = Platform::MemoryInit(); |
| SuccessOrExit(err); |
| |
| err = ParseArguments(argc, argv, customOptions); |
| SuccessOrExit(err); |
| |
| sSecondaryNetworkCommissioningEndpoint = secondaryNetworkCommissioningEndpoint; |
| |
| #ifdef CHIP_CONFIG_KVS_PATH |
| if (LinuxDeviceOptions::GetInstance().KVS == nullptr) |
| { |
| err = DeviceLayer::PersistedStorage::KeyValueStoreMgrImpl().Init(CHIP_CONFIG_KVS_PATH); |
| } |
| else |
| { |
| err = DeviceLayer::PersistedStorage::KeyValueStoreMgrImpl().Init(LinuxDeviceOptions::GetInstance().KVS); |
| } |
| SuccessOrExit(err); |
| #endif |
| |
| err = DeviceLayer::PlatformMgr().InitChipStack(); |
| SuccessOrExit(err); |
| |
| // Init the commissionable data provider based on command line options |
| // to handle custom verifiers, discriminators, etc. |
| err = chip::examples::InitCommissionableDataProvider(gCommissionableDataProvider, LinuxDeviceOptions::GetInstance()); |
| SuccessOrExit(err); |
| DeviceLayer::SetCommissionableDataProvider(&gCommissionableDataProvider); |
| |
| err = chip::examples::InitConfigurationManager(reinterpret_cast<ConfigurationManagerImpl &>(ConfigurationMgr()), |
| LinuxDeviceOptions::GetInstance()); |
| SuccessOrExit(err); |
| |
| if (LinuxDeviceOptions::GetInstance().payload.rendezvousInformation.HasValue()) |
| { |
| rendezvousFlags = LinuxDeviceOptions::GetInstance().payload.rendezvousInformation.Value(); |
| } |
| |
| err = GetPayloadContents(LinuxDeviceOptions::GetInstance().payload, rendezvousFlags); |
| SuccessOrExit(err); |
| |
| ConfigurationMgr().LogDeviceConfig(); |
| |
| { |
| ChipLogProgress(NotSpecified, "==== Onboarding payload for Standard Commissioning Flow ===="); |
| PrintOnboardingCodes(LinuxDeviceOptions::GetInstance().payload); |
| } |
| |
| #if defined(PW_RPC_ENABLED) |
| rpc::Init(LinuxDeviceOptions::GetInstance().rpcServerPort); |
| ChipLogProgress(NotSpecified, "PW_RPC initialized."); |
| #endif // defined(PW_RPC_ENABLED) |
| |
| DeviceLayer::PlatformMgrImpl().AddEventHandler(EventHandler, 0); |
| |
| #if CHIP_CONFIG_TRANSPORT_TRACE_ENABLED |
| if (LinuxDeviceOptions::GetInstance().traceStreamFilename.HasValue()) |
| { |
| const char * traceFilename = LinuxDeviceOptions::GetInstance().traceStreamFilename.Value().c_str(); |
| auto traceStream = new chip::trace::TraceStreamFile(traceFilename); |
| chip::trace::AddTraceStream(traceStream); |
| } |
| else if (LinuxDeviceOptions::GetInstance().traceStreamToLogEnabled) |
| { |
| auto traceStream = new chip::trace::TraceStreamLog(); |
| chip::trace::AddTraceStream(traceStream); |
| } |
| |
| if (LinuxDeviceOptions::GetInstance().traceStreamDecodeEnabled) |
| { |
| chip::trace::TraceDecoderOptions options; |
| options.mEnableProtocolInteractionModelResponse = false; |
| |
| chip::trace::TraceDecoder * decoder = new chip::trace::TraceDecoder(); |
| decoder->SetOptions(options); |
| chip::trace::AddTraceStream(decoder); |
| } |
| chip::trace::InitTrace(); |
| #endif // CHIP_CONFIG_TRANSPORT_TRACE_ENABLED |
| |
| #if CONFIG_NETWORK_LAYER_BLE |
| DeviceLayer::ConnectivityMgr().SetBLEDeviceName(nullptr); // Use default device name (CHIP-XXXX) |
| DeviceLayer::Internal::BLEMgrImpl().ConfigureBle(LinuxDeviceOptions::GetInstance().mBleDevice, false); |
| DeviceLayer::ConnectivityMgr().SetBLEAdvertisingEnabled(true); |
| #endif |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA && CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION |
| if (LinuxDeviceOptions::GetInstance().mWiFi) |
| { |
| // Start WiFi management in Concurrent mode |
| DeviceLayer::ConnectivityMgrImpl().StartWiFiManagement(); |
| if (!EnsureWiFiIsStarted()) |
| { |
| ChipLogError(NotSpecified, "Wi-Fi Management taking too long to start - device configuration will be reset."); |
| } |
| } |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_WPA |
| #if CHIP_DEVICE_CONFIG_ENABLE_WPA && CHIP_DEVICE_CONFIG_ENABLE_WIFIPAF |
| ChipLogProgress(NotSpecified, "WiFi-PAF: initialzing"); |
| if (LinuxDeviceOptions::GetInstance().mWiFi) |
| { |
| if (EnsureWiFiIsStarted()) |
| { |
| ChipLogProgress(NotSpecified, "Wi-Fi Management started"); |
| DeviceLayer::ConnectivityManager::WiFiPAFAdvertiseParam args; |
| args.enable = LinuxDeviceOptions::GetInstance().mWiFiPAF; |
| args.ExtCmds = LinuxDeviceOptions::GetInstance().mWiFiPAFExtCmds; |
| DeviceLayer::ConnectivityMgr().SetWiFiPAFAdvertisingEnabled(args); |
| } |
| } |
| #endif |
| |
| #if CHIP_ENABLE_OPENTHREAD |
| if (LinuxDeviceOptions::GetInstance().mThread) |
| { |
| SuccessOrExit(err = DeviceLayer::ThreadStackMgrImpl().InitThreadStack()); |
| ChipLogProgress(NotSpecified, "Thread initialized."); |
| } |
| #endif // CHIP_ENABLE_OPENTHREAD |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogProgress(NotSpecified, "Failed to init Linux App: %s ", ErrorStr(err)); |
| Cleanup(); |
| |
| // End the program with non zero error code to indicate a error. |
| return 1; |
| } |
| return 0; |
| } |
| |
| void ChipLinuxAppMainLoop(AppMainLoopImplementation * impl) |
| { |
| gMainLoopImplementation = impl; |
| |
| static chip::CommonCaseDeviceServerInitParams initParams; |
| VerifyOrDie(initParams.InitializeStaticResourcesBeforeServerInit() == CHIP_NO_ERROR); |
| |
| #if defined(ENABLE_CHIP_SHELL) |
| Engine::Root().Init(); |
| std::thread shellThread([]() { Engine::Root().RunMainLoop(); }); |
| Shell::RegisterCommissioneeCommands(); |
| #endif |
| initParams.operationalServicePort = CHIP_PORT; |
| initParams.userDirectedCommissioningPort = CHIP_UDC_PORT; |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE || CHIP_DEVICE_ENABLE_PORT_PARAMS |
| // use a different service port to make testing possible with other sample devices running on same host |
| initParams.operationalServicePort = LinuxDeviceOptions::GetInstance().securedDevicePort; |
| initParams.userDirectedCommissioningPort = LinuxDeviceOptions::GetInstance().unsecuredCommissionerPort; |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| |
| #if ENABLE_TRACING |
| chip::CommandLineApp::TracingSetup tracing_setup; |
| |
| for (const auto & trace_destination : LinuxDeviceOptions::GetInstance().traceTo) |
| { |
| tracing_setup.EnableTracingFor(trace_destination.c_str()); |
| } |
| #endif |
| |
| initParams.interfaceId = LinuxDeviceOptions::GetInstance().interfaceId; |
| |
| if (LinuxDeviceOptions::GetInstance().mCSRResponseOptions.csrExistingKeyPair) |
| { |
| LinuxDeviceOptions::GetInstance().mCSRResponseOptions.badCsrOperationalKeyStoreForTest.Init( |
| initParams.persistentStorageDelegate); |
| initParams.operationalKeystore = &LinuxDeviceOptions::GetInstance().mCSRResponseOptions.badCsrOperationalKeyStoreForTest; |
| } |
| |
| // For general testing of TestEventTrigger, we have a common "core" event trigger delegate. |
| static SimpleTestEventTriggerDelegate sTestEventTriggerDelegate; |
| static SampleTestEventTriggerHandler sTestEventTriggerHandler; |
| VerifyOrDie(sTestEventTriggerDelegate.Init(ByteSpan(LinuxDeviceOptions::GetInstance().testEventTriggerEnableKey)) == |
| CHIP_NO_ERROR); |
| VerifyOrDie(sTestEventTriggerDelegate.AddHandler(&sTestEventTriggerHandler) == CHIP_NO_ERROR); |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_OTA_REQUESTOR |
| // We want to allow triggering OTA queries if OTA requestor is enabled |
| static OTATestEventTriggerHandler sOtaTestEventTriggerHandler; |
| sTestEventTriggerDelegate.AddHandler(&sOtaTestEventTriggerHandler); |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_SMOKE_CO_TRIGGER |
| static SmokeCOTestEventTriggerHandler sSmokeCOTestEventTriggerHandler; |
| sTestEventTriggerDelegate.AddHandler(&sSmokeCOTestEventTriggerHandler); |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_BOOLEAN_STATE_CONFIGURATION_TRIGGER |
| static BooleanStateConfigurationTestEventTriggerHandler sBooleanStateConfigurationTestEventTriggerHandler; |
| sTestEventTriggerDelegate.AddHandler(&sBooleanStateConfigurationTestEventTriggerHandler); |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_ENERGY_EVSE_TRIGGER |
| static EnergyEvseTestEventTriggerHandler sEnergyEvseTestEventTriggerHandler; |
| sTestEventTriggerDelegate.AddHandler(&sEnergyEvseTestEventTriggerHandler); |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_ENERGY_REPORTING_TRIGGER |
| static EnergyReportingTestEventTriggerHandler sEnergyReportingTestEventTriggerHandler; |
| sTestEventTriggerDelegate.AddHandler(&sEnergyReportingTestEventTriggerHandler); |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_WATER_HEATER_MANAGEMENT_TRIGGER |
| static WaterHeaterManagementTestEventTriggerHandler sWaterHeaterManagementTestEventTriggerHandler; |
| sTestEventTriggerDelegate.AddHandler(&sWaterHeaterManagementTestEventTriggerHandler); |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_DEVICE_ENERGY_MANAGEMENT_TRIGGER |
| static DeviceEnergyManagementTestEventTriggerHandler sDeviceEnergyManagementTestEventTriggerHandler; |
| sTestEventTriggerDelegate.AddHandler(&sDeviceEnergyManagementTestEventTriggerHandler); |
| #endif |
| |
| initParams.testEventTriggerDelegate = &sTestEventTriggerDelegate; |
| |
| // We need to set DeviceInfoProvider before Server::Init to setup the storage of DeviceInfoProvider properly. |
| DeviceLayer::SetDeviceInfoProvider(&gExampleDeviceInfoProvider); |
| |
| chip::app::RuntimeOptionsProvider::Instance().SetSimulateNoInternalTime( |
| LinuxDeviceOptions::GetInstance().mSimulateNoInternalTime); |
| |
| #if CHIP_CONFIG_USE_ACCESS_RESTRICTIONS |
| initParams.accessRestrictionProvider = exampleAccessRestrictionProvider.get(); |
| #endif |
| |
| // Init ZCL Data Model and CHIP App Server |
| Server::GetInstance().Init(initParams); |
| |
| #if CHIP_CONFIG_USE_ACCESS_RESTRICTIONS |
| if (LinuxDeviceOptions::GetInstance().commissioningArlEntries.HasValue()) |
| { |
| exampleAccessRestrictionProvider->SetCommissioningEntries( |
| LinuxDeviceOptions::GetInstance().commissioningArlEntries.Value()); |
| } |
| |
| if (LinuxDeviceOptions::GetInstance().arlEntries.HasValue()) |
| { |
| // This example use of the ARL feature proactively installs the provided entries on fabric index 1 |
| exampleAccessRestrictionProvider->SetEntries(1, LinuxDeviceOptions::GetInstance().arlEntries.Value()); |
| } |
| #endif |
| |
| #if CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| // Set ReadHandler Capacity for Subscriptions |
| chip::app::InteractionModelEngine::GetInstance()->SetHandlerCapacityForSubscriptions( |
| LinuxDeviceOptions::GetInstance().subscriptionCapacity); |
| chip::app::InteractionModelEngine::GetInstance()->SetForceHandlerQuota(true); |
| #if CHIP_CONFIG_PERSIST_SUBSCRIPTIONS && CHIP_CONFIG_SUBSCRIPTION_TIMEOUT_RESUMPTION |
| // Set subscription time resumption retry interval seconds |
| chip::app::InteractionModelEngine::GetInstance()->SetSubscriptionTimeoutResumptionRetryIntervalSeconds( |
| LinuxDeviceOptions::GetInstance().subscriptionResumptionRetryIntervalSec); |
| #endif // CHIP_CONFIG_PERSIST_SUBSCRIPTIONS && CHIP_CONFIG_SUBSCRIPTION_TIMEOUT_RESUMPTION |
| #endif // CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| |
| // Now that the server has started and we are done with our startup logging, |
| // log our discovery/onboarding information again so it's not lost in the |
| // noise. |
| ConfigurationMgr().LogDeviceConfig(); |
| |
| PrintOnboardingCodes(LinuxDeviceOptions::GetInstance().payload); |
| |
| // Initialize device attestation config |
| SetDeviceAttestationCredentialsProvider(LinuxDeviceOptions::GetInstance().dacProvider); |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| ChipLogProgress(AppServer, "Starting commissioner"); |
| VerifyOrReturn(InitCommissioner(LinuxDeviceOptions::GetInstance().securedCommissionerPort, |
| LinuxDeviceOptions::GetInstance().unsecuredCommissionerPort, |
| LinuxDeviceOptions::GetInstance().commissionerFabricId) == CHIP_NO_ERROR); |
| ChipLogProgress(AppServer, "Started commissioner"); |
| #if defined(ENABLE_CHIP_SHELL) |
| Shell::RegisterControllerCommands(); |
| #endif // defined(ENABLE_CHIP_SHELL) |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| |
| InitNetworkCommissioning(); |
| |
| ApplicationInit(); |
| |
| #if !defined(ENABLE_CHIP_SHELL) |
| // NOLINTBEGIN(bugprone-signal-handler) |
| signal(SIGINT, StopSignalHandler); |
| signal(SIGTERM, StopSignalHandler); |
| // NOLINTEND(bugprone-signal-handler) |
| #endif // !defined(ENABLE_CHIP_SHELL) |
| |
| if (impl != nullptr) |
| { |
| impl->RunMainLoop(); |
| } |
| else |
| { |
| DeviceLayer::PlatformMgr().RunEventLoop(); |
| } |
| gMainLoopImplementation = nullptr; |
| |
| ApplicationShutdown(); |
| |
| #if defined(ENABLE_CHIP_SHELL) |
| shellThread.join(); |
| #endif |
| |
| Server::GetInstance().Shutdown(); |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| ShutdownCommissioner(); |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| |
| #if ENABLE_TRACING |
| tracing_setup.StopTracing(); |
| #endif |
| |
| DeviceLayer::PlatformMgr().Shutdown(); |
| |
| Cleanup(); |
| } |