| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.14. [TC-CADMIN-1.14] Open commissioning window twice on DUT using BCM |
| then ECM [DUT - Commissioner] |
| |
| PICS: |
| - CADMIN.C |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Precondition: Reset DUT_CE to factory defaults" |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: "DUT_CR1 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM and |
| TH_CR3 Commissions with TH_CE" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| "1. Provision the device using your DUT controller (use above instructions) , |
| " |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM and |
| TH_CR2 Commissions with TH_CE" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On your DUT controller, open commissioning window using ECM |
| |
| Below is the example while using chip tool as controller |
| ./chip-tool pairing open-commissioning-window 1 1 300 1000 3840 |
| |
| [1635874557.409509][4549:4554] CHIP:SC: Success status report received. Session was established |
| [1635874557.409553][4549:4554] CHIP:IN: New secure session created for device 0x0000000000000001, key 76!! |
| [1635874557.409649][4549:4554] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635874557.416929][4549:4554] CHIP:DMG: ICR moving to [AddingComm] |
| [1635874557.417092][4549:4554] CHIP:DMG: ICR moving to [AddedComma] |
| [1635874557.417215][4549:4554] CHIP:IN: Prepared encrypted message 0xaaaac5947d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 5541i with MessageCounter:0. |
| [1635874557.417271][4549:4554] CHIP:IN: Sending encrypted msg 0xaaaac5947d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 16129075 msec |
| [1635874557.417449][4549:4554] CHIP:DMG: ICR moving to [CommandSen] |
| [1635874557.417505][4549:4554] CHIP:CTL: Manual pairing code: [35484132896] |
| [1635874557.417577][4549:4554] CHIP:CTL: SetupQRCode: [MT:00000CQM00AT-F5A510] |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On 2nd controller using chip tool connect using manual code |
| ./chip-tool pairing code 1 35484132896 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 4, DUT_CR1 sends command to TH_CE to read WindowStatus |
| attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On your DUT controller, open commissioning window using ECM |
| |
| Below is the example while using chip tool as controller |
| ./chip-tool pairing open-commissioning-window 1 1 300 1000 3840 |
| |
| [1635874557.409509][4549:4554] CHIP:SC: Success status report received. Session was established |
| [1635874557.409553][4549:4554] CHIP:IN: New secure session created for device 0x0000000000000001, key 76!! |
| [1635874557.409649][4549:4554] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635874557.416929][4549:4554] CHIP:DMG: ICR moving to [AddingComm] |
| [1635874557.417092][4549:4554] CHIP:DMG: ICR moving to [AddedComma] |
| [1635874557.417215][4549:4554] CHIP:IN: Prepared encrypted message 0xaaaac5947d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 5541i with MessageCounter:0. |
| [1635874557.417271][4549:4554] CHIP:IN: Sending encrypted msg 0xaaaac5947d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 16129075 msec |
| [1635874557.417449][4549:4554] CHIP:DMG: ICR moving to [CommandSen] |
| [1635874557.417505][4549:4554] CHIP:CTL: Manual pairing code: [35484132896] |
| [1635874557.417577][4549:4554] CHIP:CTL: SetupQRCode: [MT:00000CQM00AT-F5A510] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 4, DUT_CR1 sends command to TH_CE to open a 2nd commissioning |
| window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds |
| using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 3rd controller using chip tool connect using manual code |
| ./chip-tool pairing code 3 35484132896 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 4" |
| verification: | |
| On 1st controller using chip tool, read fabrics list |
| |
| ./chip-tool operationalcredentials read fabrics 1234 0 --fabric-filtered 0 |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 268962768 |
| [1650527361.425870][15792:15797] CHIP:TOO: Fabrics: 3 entries |
| [1650527361.426777][15792:15797] CHIP:TOO: [1]: { |
| [1650527361.426859][15792:15797] CHIP:TOO: RootPublicKey: 0429A71383F336D80918C9EC655112513E428C073AF7FB44820EC793535302C6E3825C56EE6DD1A683EAA7B59E3F261B46FFA24A6D911E8D88839F4C1B3C84BA01 |
| [1650527361.426923][15792:15797] CHIP:TOO: VendorId: 65521 |
| [1650527361.426979][15792:15797] CHIP:TOO: FabricId: 1 |
| [1650527361.427033][15792:15797] CHIP:TOO: NodeId: 1 |
| [1650527361.427088][15792:15797] CHIP:TOO: Label: |
| [1650527361.427166][15792:15797] CHIP:TOO: FabricIndex: 1 |
| [1650527361.427376][15792:15797] CHIP:TOO: } |
| [1650527361.427464][15792:15797] CHIP:TOO: [2]: { |
| [1650527361.427532][15792:15797] CHIP:TOO: RootPublicKey: 04781BCEE70118049ED61DD5B4E401CF1A09D2F78AE7F5770BE5506AD24238E5E0777277DABAFD062659651C95CC2CA7DEAACE40DB579A946CC07CADB141BE05D7 |
| [1650527361.427595][15792:15797] CHIP:TOO: VendorId: 65521 |
| [1650527361.427649][15792:15797] CHIP:TOO: FabricId: 1 |
| [1650527361.427703][15792:15797] CHIP:TOO: NodeId: 3 |
| [1650527361.427756][15792:15797] CHIP:TOO: Label: |
| [1650527361.427811][15792:15797] CHIP:TOO: FabricIndex: 2 |
| [1650527361.427868][15792:15797] CHIP:TOO: } |
| [1650527361.427943][15792:15797] CHIP:TOO: [3]: { |
| [1650527361.428008][15792:15797] CHIP:TOO: RootPublicKey: 0403EDB5B461030A34EF7EA2F9DB0D46A36185E4755C365AF9344C4959F049EF21D55EAB903A2C7FBFC305EEFA42989250D7517A73E6156062390A60C0D4C41EBD |
| [1650527361.428067][15792:15797] CHIP:TOO: VendorId: 65521 |
| [1650527361.428122][15792:15797] CHIP:TOO: FabricId: 1 |
| [1650527361.428176][15792:15797] CHIP:TOO: NodeId: 2 |
| [1650527361.428229][15792:15797] CHIP:TOO: Label: |
| [1650527361.428282][15792:15797] CHIP:TOO: FabricIndex: 3 |
| [1650527361.428335][15792:15797] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to re-opens a commissioning window |
| with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds using |
| ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| on 2nd controller using chip tool, remove fabric with FabricIndex=2 |
| |
| ./chip-tool operationalcredentials remove-fabric 2 1 0 |
| |
| CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_003E Command=0x0000_0008 |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Command 0x0000_0008 |
| CHIP:TOO: NOCResponse: { |
| CHIP:TOO: statusCode: 0 |
| CHIP:TOO: fabricIndex: 2 |
| CHIP:TOO: } |
| CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 8, DUT_CR1 sends command to TH_CE to read WindowStatus |
| attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| Using your 2nd controller, write attribute and read attribute to and from TH_CE |
| |
| Below is the example while using chip tool on second controller, |
| ./chip-tool basic write node-label te5new 2 0 |
| |
| Received error (protocol code 2) during pairing process. ../../third_party/connectedhomeip/src/protocols/secure_channel/CASESession.cpp:1551: CHIP Error 0x00000054: Invalid CASE parameter |
| [1651819620.929567][4359:4364] CHIP:CTL: OperationalDeviceProxy[B8070CD13C99D367:0000000000000002]: State change 3 --> 2 |
| [1651819620.929700][4359:4364] CHIP:-: ../../third_party/connectedhomeip/src/protocols/secure_channel/CASESession.cpp:1551: CHIP Error 0x00000054: Invalid CASE parameter at ../../commands/clusters/ModelCommand.cpp:53 |
| |
| ./chip-tool basic read node-label 2 0 |
| |
| Received error (protocol code 2) during pairing process. ../../third_party/connectedhomeip/src/protocols/secure_channel/CASESession.cpp:1551: CHIP Error 0x00000054: Invalid CASE parameter |
| [1651819620.929567][4359:4364] CHIP:CTL: OperationalDeviceProxy[B8070CD13C99D367:0000000000000002]: State change 3 --> 2 |
| [1651819620.929700][4359:4364] CHIP:-: ../../third_party/connectedhomeip/src/protocols/secure_channel/CASESession.cpp:1551: CHIP Error 0x00000054: Invalid CASE parameter at ../../commands/clusters/ModelCommand.cpp:53 |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 8, TH_CR3 sends command to TH_CE to open a 2nd commissioning |
| window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds |
| using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 1st controller using chip tool, read fabrics list |
| |
| Below is the command using chip tool controller |
| |
| ./chip-tool operationalcredentials read fabrics 1 0 --fabric-filtered 0 |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 2455995219 |
| [1647863260.286772][9294:9299] CHIP:TOO: Fabrics: 2 entries |
| [1647863260.286908][9294:9299] CHIP:TOO: [1]: { |
| [1647863260.286947][9294:9299] CHIP:TOO: RootPublicKey: 04656F56DBDB677DC957028DFC0ED76709C72753C9194B117A483BDC07386BFD9529B68EB4448FBBA3964EFF37A56A8F461D348B0DAF3B56A75F3B94BF8209D36F |
| [1647863260.286995][9294:9299] CHIP:TOO: VendorId: 65521 |
| [1647863260.287026][9294:9299] CHIP:TOO: FabricId: 1 |
| [1647863260.287055][9294:9299] CHIP:TOO: NodeId: 1 |
| [1647863260.287084][9294:9299] CHIP:TOO: Label: |
| [1647863260.287113][9294:9299] CHIP:TOO: FabricIndex: 1 |
| [1647863260.287144][9294:9299] CHIP:TOO: } |
| [1647863260.287185][9294:9299] CHIP:TOO: [2]: { |
| [1647863260.287221][9294:9299] CHIP:TOO: RootPublicKey: 04F8F28D5D70A4510E0F72FBBA31369796C4206FF95D97B77C1BDFD0438A3BE43510631A1B915BE189323F4CC0E015480192654D8170F8F230C7713898962958B7 |
| [1647863260.287253][9294:9299] CHIP:TOO: VendorId: 65521 |
| [1647863260.287282][9294:9299] CHIP:TOO: FabricId: 1 |
| [1647863260.287310][9294:9299] CHIP:TOO: NodeId: 3 |
| [1647863260.287339][9294:9299] CHIP:TOO: Label: |
| [1647863260.287368][9294:9299] CHIP:TOO: FabricIndex: 3 |
| [1647863260.287396][9294:9299] CHIP:TOO: } |
| [1647863260.287515][9294:9299] CHIP:EM: Sending Standalone Ack for MessageCounter:11301761 on exchange 13180i" |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 8" |
| verification: | |
| grl@grl-ThinkPad-L480:~/may16_cntrl03/connectedhomeip/examples/chip-tool/out/debug$ avahi-browse -rt _matter._tcp |
| + wlp5s0 IPv6 8E50A59FAF52A809-0000000000000001 _matter._tcp local |
| + wlp5s0 IPv6 03E707466A904C7E-0000000000000003 _matter._tcp local |
| = wlp5s0 IPv6 8E50A59FAF52A809-0000000000000001 _matter._tcp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["T=1" "SAI=300" "SII=5000"] |
| = wlp5s0 IPv6 03E707466A904C7E-0000000000000003 _matter._tcp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["T=1" "SAI=300" "SII=5000"] |
| grl@grl-ThinkPad-L480:~/may16_cntrl03/connectedhomeip/examples/chip-tool/out/debug$ |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 1st controller chip tool, open commissioning window |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| [1635925713.966786][9695:9700] CHIP:SC: Success status report received. Session was established |
| [1635925713.966839][9695:9700] CHIP:IN: New secure session created for device 0x0000000000000001, key 33!! |
| [1635925713.966938][9695:9700] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635925713.972601][9695:9700] CHIP:DMG: ICR moving to [AddingComm] |
| [1635925713.972705][9695:9700] CHIP:DMG: ICR moving to [AddedComma] |
| [1635925713.972815][9695:9700] CHIP:IN: Prepared encrypted message 0xaaaad9b57d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 31056i with MessageCounter:0. |
| [1635925713.972876][9695:9700] CHIP:IN: Sending encrypted msg 0xaaaad9b57d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 13449459 msec |
| [1635925713.973006][9695:9700] CHIP:DMG: ICR moving to [CommandSen] |
| [1635925713.973061][9695:9700] CHIP:CTL: Manual pairing code: [36217551633] |
| [1635925713.973120][9695:9700] CHIP:CTL: SetupQRCode: [MT:00000CQM00A7F87ZT10] |
| [1635925713.973178][9695:9700] CHIP:EM: Sending Standalone Ack for MessageCounter:1964916542 on exchange 31055i |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 12, TH_CR2 sends command to TH_CE to open a second |
| commissioning window with a commissioning timeout of |
| PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 2nd controller using chip tool connect to the accessory |
| |
| |
| ./chip-tool pairing code 1 36217551633 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 12" |
| verification: | |
| On 1st controller, read fabrics list |
| |
| Below is the command using chip tool controller |
| |
| ./chip-tool operationalcredentials read fabrics 1 0 --fabric-filtered 0 |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 2455995246 |
| [1647863342.980899][9309:9314] CHIP:TOO: Fabrics: 3 entries |
| [1647863342.981158][9309:9314] CHIP:TOO: [1]: { |
| [1647863342.981231][9309:9314] CHIP:TOO: RootPublicKey: 04656F56DBDB677DC957028DFC0ED76709C72753C9194B117A483BDC07386BFD9529B68EB4448FBBA3964EFF37A56A8F461D348B0DAF3B56A75F3B94BF8209D36F |
| [1647863342.981322][9309:9314] CHIP:TOO: VendorId: 65521 |
| [1647863342.981380][9309:9314] CHIP:TOO: FabricId: 1 |
| [1647863342.981434][9309:9314] CHIP:TOO: NodeId: 1 |
| [1647863342.981486][9309:9314] CHIP:TOO: Label: |
| [1647863342.981539][9309:9314] CHIP:TOO: FabricIndex: 1 |
| [1647863342.981594][9309:9314] CHIP:TOO: } |
| [1647863342.981671][9309:9314] CHIP:TOO: [2]: { |
| [1647863342.981737][9309:9314] CHIP:TOO: RootPublicKey: 04F8F28D5D70A4510E0F72FBBA31369796C4206FF95D97B77C1BDFD0438A3BE43510631A1B915BE189323F4CC0E015480192654D8170F8F230C7713898962958B7 |
| [1647863342.981796][9309:9314] CHIP:TOO: VendorId: 65521 |
| [1647863342.981849][9309:9314] CHIP:TOO: FabricId: 1 |
| [1647863342.981901][9309:9314] CHIP:TOO: NodeId: 3 |
| [1647863342.981952][9309:9314] CHIP:TOO: Label: |
| [1647863342.982005][9309:9314] CHIP:TOO: FabricIndex: 3 |
| [1647863342.982057][9309:9314] CHIP:TOO: } |
| [1647863342.982131][9309:9314] CHIP:TOO: [3]: { |
| [1647863342.982195][9309:9314] CHIP:TOO: RootPublicKey: 04F8F28D5D70A4510E0F72FBBA31369796C4206FF95D97B77C1BDFD0438A3BE43510631A1B915BE189323F4CC0E015480192654D8170F8F230C7713898962958B7 |
| [1647863342.982252][9309:9314] CHIP:TOO: VendorId: 65521 |
| [1647863342.982305][9309:9314] CHIP:TOO: FabricId: 1 |
| [1647863342.982357][9309:9314] CHIP:TOO: NodeId: 2 |
| [1647863342.982409][9309:9314] CHIP:TOO: Label: |
| [1647863342.982460][9309:9314] CHIP:TOO: FabricIndex: 4 |
| [1647863342.982512][9309:9314] CHIP:TOO: } |
| [1647863342.982738][9309:9314] CHIP:EM: Sending Standalone Ack for MessageCounter:5772016 on exchange 3310i |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read WindowStatus attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| Verify DUT successfully reads window status |
| |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0000 DataVersion: 2849200592 |
| [1651137648.760469][14047:14052] CHIP:TOO: WindowStatus: 0 |
| [1651137648.760534][14047:14052] CHIP:EM: Sending Standalone Ack for MessageCounter:5527412 on exchange 14590i" |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read AdminFabricIndex attribute" |
| PICS: CADMIN.C.A0001 |
| verification: | |
| Verifu DUT successfully reads AdminFabricIndex |
| |
| ./chip-tool administratorcommissioning read admin-fabric-index 1 0 |
| |
| [1659097193.389295][11728:11733] CHIP:DMG: } |
| [1659097193.389588][11728:11733] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0001 DataVersion: 1299585105 |
| [1659097193.389731][11728:11733] CHIP:TOO: AdminFabricIndex: 0 |
| [1659097193.389913][11728:11733] CHIP:EM: Sending Standalone Ack for MessageCounter:195671426 on exchange 34244i |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read AdminVendorId attribute" |
| PICS: CADMIN.C.A0002 |
| verification: | |
| Verify DUT successfully reads AdminVendoeId |
| |
| ./chip-tool administratorcommissioning read admin-vendor-id 1 0 |
| |
| [1658838521.588942][9317:9322] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0002 DataVersion: 2423106591 |
| [1658838521.589005][9317:9322] CHIP:TOO: AdminVendorId: 0 |
| [1658838521.589079][9317:9322] CHIP:EM: Sending Standalone Ack for MessageCounter:217165763 on exchange 55683i |
| disabled: true |
