| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 32.2.2. [TC-BDX-2.2] Synchronous file receiving |
| |
| PICS: |
| - MCORE.BDX.SynchronousReceiver |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Preconditions" |
| verification: | |
| This test can be verified using TC-SU-2.3 from the OTA Software Update section. Pls refer to OTA section for steps. |
| This test can also be verified with DUT sending a ReceiveInit message to the TH. |
| disabled: true |
| |
| - label: |
| "Step 1: TH sends the first Block message to DUT + DUT sends a |
| BlockAck message back to TH." |
| verification: | |
| Out of scope |
| disabled: true |
| |
| - label: |
| "Step 2: DUT sends the first BlockQuery message to TH + TH sends a |
| Block message back to DUT." |
| PICS: MCORE.BDX.Driver |
| verification: | |
| On OTA Reference Provider App logs, Verify that the BlockQuery message has the following mandatory fields. |
| - Block Counter - Must start at 0 at the start of the transfer. |
| |
| [1636410922974] [59203:62969336] CHIP: [ATM] Handling received BDX Message |
| [1636410922974] [59203:62969336] CHIP: [ATM] BlockQuery |
| [1636410922974] [59203:62969336] CHIP: [ATM] Block Counter: 0 |
| disabled: true |
| |
| - label: |
| "Step 3: DUT sends further BlockQuery messages to TH + TH sends |
| further Block messages back to DUT." |
| PICS: MCORE.BDX.Driver |
| verification: | |
| On OTA Reference Provider App logs, Verify that the BlockQuery messages are sent in ascending and sequential block counter order. |
| |
| [1636410924476] [59203:62969337] CHIP: [ATM] BlockQuery |
| [1636410924476] [59203:62969337] CHIP: [ATM] Block Counter: 1 |
| |
| [1636410925977] [59203:62969337] CHIP: [ATM] BlockQuery |
| [1636410925977] [59203:62969337] CHIP: [ATM] Block Counter: 2 |
| |
| and so on |
| disabled: true |
| |
| - label: |
| "Step 4: DUT sends a BlockQueryWithSkip message to TH + TH sends a |
| Block message back to DUT." |
| PICS: MCORE.BDX.BlockQueryWithSkip |
| verification: | |
| Out of scope |
| disabled: true |
| |
| - label: |
| "Step 5: TH sends a BlockEOF message to DUT + DUT sends a BlockAckEOF |
| message back to TH" |
| verification: | |
| On OTA Reference App logs, Verify that the BlockAckEOF message has the following mandatory fields. |
| Block Counter - Must correspond to the Block Counter which was embedded in the BlockEOF being acknowledged |
| |
| [1636410936486] [59203:62969336] CHIP: [ATM] Handling received BDX Message |
| [1636410936486] [59203:62969336] CHIP: [ATM] BlockAckEOF |
| [1636410936486] [59203:62969336] CHIP: [ATM] Block Counter: 8 |
| |
| Compare with |
| |
| [1636410935209] [59203:62969337] CHIP: [ATM] Sending BDX Message |
| [1636410935209] [59203:62969337] CHIP: [ATM] BlockEOF |
| [1636410935209] [59203:62969337] CHIP: [ATM] Block Counter: 8 |
| [1636410935209] [59203:62969337] CHIP: [ATM] Data Length: 147 |
| disabled: true |