| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| 4.2.6. [TC-SMOKECO-2.6] ExpressedState Attribute - Multiple Alarms with DUT |
| as Server |
| |
| PICS: |
| - SMOKECO.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Smoke CO Alarm" |
| endpoint: 1 |
| timeout: 3090 |
| TEST_EVENT_TRIGGER_KEY: |
| type: octet_string |
| defaultValue: "hex:00112233445566778899aabbccddeeff" |
| TEST_EVENT_TRIGGER_WARNING_SMOKE_ALARM: |
| type: int64u |
| defaultValue: "0x005c000000000090" |
| TEST_EVENT_TRIGGER_SMOKE_ALARM_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a0" |
| TEST_EVENT_TRIGGER_WARNING_CO_ALARM: |
| type: int64u |
| defaultValue: "0x005c000000000091" |
| TEST_EVENT_TRIGGER_CO_ALARM_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a1" |
| TEST_EVENT_TRIGGER_WARNING_BATTERY_ALERT: |
| type: int64u |
| defaultValue: "0x005c000000000095" |
| TEST_EVENT_TRIGGER_BATTERY_ALERT_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a5" |
| TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM: |
| type: int64u |
| defaultValue: "0x005c000000000092" |
| TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a2" |
| TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM: |
| type: int64u |
| defaultValue: "0x005c000000000094" |
| TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a4" |
| HIEST_PRI_ALARM: |
| type: int8u |
| defaultValue: 1 |
| HIEST_PRI_ALARM_2: |
| type: int8u |
| defaultValue: 7 |
| HIEST_PRI_ALARM_3: |
| type: int8u |
| defaultValue: 7 |
| HIEST_PRI_ALARM_4: |
| type: int8u |
| defaultValue: 7 |
| HIEST_PRI_ALARM_5: |
| type: int8u |
| defaultValue: 3 |
| |
| tests: |
| - label: "Step 1: Commission DUT to TH" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Step 2: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 3: TH subscribes to BatteryAlert attribute from DUT" |
| PICS: SMOKECO.S.A0003 |
| command: "subscribeAttribute" |
| attribute: "BatteryAlert" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 4: TH subscribes to InterconnectSmokeAlarm attribute from DUT" |
| PICS: SMOKECO.S.A0008 |
| command: "subscribeAttribute" |
| attribute: "InterconnectSmokeAlarm" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 5: TH subscribes to InterconnectCOAlarm attribute from DUT" |
| PICS: SMOKECO.S.A0009 |
| command: "subscribeAttribute" |
| attribute: "InterconnectCOAlarm" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 6: TH subscribes to COState attribute from DUT" |
| PICS: SMOKECO.S.A0002 |
| command: "subscribeAttribute" |
| attribute: "COState" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 7: TH subscribes to SmokeState attribute from DUT" |
| PICS: SMOKECO.S.A0001 |
| command: "subscribeAttribute" |
| attribute: "SmokeState" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 8: TH reads TestEventTriggersEnabled attribute from General |
| Diagnostics Cluster" |
| PICS: DGGEN.S.A0008 |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "readAttribute" |
| attribute: "TestEventTriggersEnabled" |
| response: |
| value: 1 |
| |
| - label: "Step 9a: TH subscribes to BatteryAlert attribute from DUT" |
| PICS: SMOKECO.S.A0003 |
| command: "subscribeAttribute" |
| attribute: "BatteryAlert" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 9b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning Battery Alert Test Event" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_WARNING_BATTERY_ALERT |
| |
| - label: |
| "Step 10: TH waits for a report of BatteryAlert attribute from DUT |
| with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read battery-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838 |
| [TOO] BatteryAlert: 1 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 11a: TH subscribes to InterconnectSmokeAlarm attribute from DUT" |
| PICS: SMOKECO.S.A0008 |
| command: "subscribeAttribute" |
| attribute: "InterconnectSmokeAlarm" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 11b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect Smoke Alarm Test |
| Event" |
| PICS: SMOKECO.S.A0008 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM |
| |
| - label: |
| "Step 12: TH waits for a report of InterconnectSmokeAlarm attribute |
| from DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0008 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read interconnect-smoke-alarm 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0008 DataVersion: 1795725838 |
| [TOO] InterconnectSmokeAlarm: 1 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 13a: TH subscribes to InterconnectCOAlarm attribute from DUT" |
| PICS: SMOKECO.S.A0009 |
| command: "subscribeAttribute" |
| attribute: "InterconnectCOAlarm" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 13b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect CO Alarm Test Event" |
| PICS: SMOKECO.S.A0009 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM |
| |
| - label: |
| "Step 14: TH waits for a report of InterconnectCOAlarm attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0009 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read interconnect-coalarm 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0009 DataVersion: 1795725838 |
| [TOO] InterconnectCOAlarm: 1 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 15a: TH subscribes to COState attribute from DUT" |
| PICS: SMOKECO.S.A0002 |
| command: "subscribeAttribute" |
| attribute: "COState" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 15b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning CO Alarm Test Event" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_WARNING_CO_ALARM |
| |
| - label: |
| "Step 16: TH waits for a report of COState attribute from DUT with a |
| timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0002 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read costate 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0002 DataVersion: 1795725838 |
| [TOO] COState: 1 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 17a: TH subscribes to SmokeState attribute from DUT" |
| PICS: SMOKECO.S.A0001 |
| command: "subscribeAttribute" |
| attribute: "SmokeState" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 17b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning Smoke Alarm Test Event" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_WARNING_SMOKE_ALARM |
| |
| - label: |
| "Step 18: TH waits for a report of SmokeState attribute from DUT with |
| a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0001 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-state 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0001 DataVersion: 1795725838 |
| [TOO] SmokeState: 1 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 19: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: HIEST_PRI_ALARM |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 20: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Smoke Alarm Test Event Clear" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_SMOKE_ALARM_CLEAR |
| |
| - label: |
| "Step 21: TH waits for a report of SmokeState attribute from DUT with |
| a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0001 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-state 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0001 DataVersion: 1795725838 |
| [TOO] SmokeState: 0 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 22: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: HIEST_PRI_ALARM_2 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 23a: TH subscribes to COState attribute from DUT" |
| PICS: SMOKECO.S.A0002 |
| command: "subscribeAttribute" |
| attribute: "COState" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 23b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for CO Alarm Test Event clear" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_CO_ALARM_CLEAR |
| |
| - label: |
| "Step 24: TH waits for a report of COState attribute from DUT with a |
| timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0002 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read costate 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0002 DataVersion: 1795725838 |
| [TOO] COState: 0 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 25: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: HIEST_PRI_ALARM_3 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 26a: TH subscribes to InterconnectCOAlarm attribute from DUT" |
| PICS: SMOKECO.S.A0009 |
| command: "subscribeAttribute" |
| attribute: "InterconnectCOAlarm" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 26b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect CO Alarm Test Event |
| Clear" |
| PICS: SMOKECO.S.A0009 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM_CLEAR |
| |
| - label: |
| "Step 27: TH waits for a report of InterconnectCOAlarm attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0009 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read interconnect-coalarm 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0009 DataVersion: 1795725838 |
| [TOO] InterconnectCOAlarm: 0 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 28: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: HIEST_PRI_ALARM_4 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 29a: TH subscribes to InterconnectSmokeAlarm attribute from DUT" |
| PICS: SMOKECO.S.A0008 |
| command: "subscribeAttribute" |
| attribute: "InterconnectSmokeAlarm" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 29b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect Smoke Alarm Test |
| Event Clear" |
| PICS: SMOKECO.S.A0008 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM_CLEAR |
| |
| - label: |
| "Step 30: TH waits for a report of InterconnectSmokeAlarm attribute |
| from DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0008 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read interconnect-smoke-alarm 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0008 DataVersion: 1795725838 |
| [TOO] InterconnectSmokeAlarm: 0 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 31: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: HIEST_PRI_ALARM_5 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 32a: TH subscribes to BatteryAlert attribute from DUT" |
| PICS: SMOKECO.S.A0003 |
| command: "subscribeAttribute" |
| attribute: "BatteryAlert" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 32b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Battery Alert Test Event Clear" |
| PICS: DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_BATTERY_ALERT_CLEAR |
| |
| - label: |
| "Step 33: TH waits for a report of BatteryAlert attribute from DUT |
| with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0003 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read battery-alert 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0003 DataVersion: 1795725838 |
| [TOO] BatteryAlert: 0 |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 34: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |