| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 219.3.1. [TC-TCCM-3.1] On Mode functionality with DUT as Server |
| |
| PICS: |
| - TCCM.S.A0003 |
| - MOD.S.F00 |
| - OO.S.C00.Rsp |
| - OO.S.C01.Rsp |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Refrigerator And Temperature Controlled Cabinet Mode" |
| endpoint: 1 |
| #Configure newmode value |
| new_mode_th: |
| type: int8u |
| defaultValue: 2 |
| nonNull_OnMode_value: |
| type: int8u |
| defaultValue: 0 |
| |
| tests: |
| - label: |
| "Step 1: Commission DUT to TH (can be skipped if done in a preceding |
| test)." |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: |
| "Preconditions: The OnMode attribute is set to a non-NULL value from |
| the mode values indicated by the SupportedModes attribute." |
| PICS: TCCM.S.A0003 && MOD.S.F00 |
| command: "writeAttribute" |
| attribute: "OnMode" |
| arguments: |
| value: nonNull_OnMode_value |
| |
| - label: "Step 2: TH reads from the DUT the OnMode attribute." |
| PICS: TCCM.S.A0003 && MOD.S.F00 |
| command: "readAttribute" |
| attribute: "OnMode" |
| response: |
| saveAs: on_mode_dut |
| |
| - label: "Step 3a: TH reads from the DUT the CurrentMode attribute." |
| PICS: TCCM.S.A0001 && MOD.S.F00 |
| command: "readAttribute" |
| attribute: "CurrentMode" |
| response: |
| saveAs: old_current_mode_dut |
| |
| - label: |
| "Step 3b: If the OnMode and CurrentMode attributes have the same |
| value, proceed to step 4, Otherwise proceed to step 6" |
| PICS: TCCM.S.A0003 && TCCM.S.A0001 && MOD.S.F00 |
| cluster: "EqualityCommands" |
| command: "UnsignedNumberEquals" |
| arguments: |
| values: |
| - name: "Value1" |
| value: on_mode_dut |
| - name: "Value2" |
| value: old_current_mode_dut |
| response: |
| - values: |
| - name: "Equals" |
| saveAs: IsExpectedValue |
| |
| - label: "Step 4:TH reads the SupportedModes attribute from the DUT" |
| runIf: IsExpectedValue |
| PICS: TCCM.S.A0000 && MOD.S.F00 |
| command: "readAttribute" |
| attribute: "SupportedModes" |
| response: |
| constraints: |
| type: list |
| minLength: 2 |
| |
| - label: |
| "Step 5: Select a value from supported_modes_dut different from |
| on_mode_dut. Save the value as new_mode_th. TH sends a ChangeToMode |
| command to the DUT with NewMode set to new_mode_th" |
| runIf: IsExpectedValue |
| PICS: TCCM.S.C00.Rsp && MOD.S.F00 |
| command: "ChangeToMode" |
| arguments: |
| values: |
| - name: "NewMode" |
| value: new_mode_th |
| response: |
| values: |
| - name: "Status" |
| value: 0x00 |
| |
| - label: "Step 6: TH sends an Off command to the DUT" |
| PICS: OO.S.C00.Rsp && MOD.S.F00 |
| cluster: "On/Off" |
| command: "Off" |
| |
| - label: "Step 7: TH sends an On command to the DUT" |
| PICS: OO.S.C01.Rsp && MOD.S.F00 |
| cluster: "On/Off" |
| command: "On" |
| |
| - label: "Step 8: TH reads the CurrentMode attribute from the DUT" |
| PICS: TCCM.S.A0001 && MOD.S.F00 |
| command: "readAttribute" |
| attribute: "CurrentMode" |
| response: |
| value: on_mode_dut |