| # |
| # Copyright (c) 2020 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| _install_additional_pip_requirements() { |
| _SETUP_PLATFORM=$1 |
| shift |
| |
| # figure out additional pip install items |
| while [ $# -gt 0 ]; do |
| case $1 in |
| -p | --platform) |
| _SETUP_PLATFORM=$2 |
| shift # argument |
| shift # value |
| ;; |
| *) |
| shift |
| ;; |
| esac |
| done |
| |
| if [ -n "$_SETUP_PLATFORM" ]; then |
| _OLD_IFS=$IFS |
| IFS="," |
| if [ -n "$ZSH_VERSION" ]; then |
| setopt local_options shwordsplit |
| fi |
| |
| for platform in ${_SETUP_PLATFORM}; do |
| # Allow none as an alias of nothing extra installed (like -p none) |
| if [ "$platform" != "none" -a -e "$_CHIP_ROOT/scripts/setup/requirements.$platform.txt" ]; then |
| echo "Installing pip requirements for $platform..." |
| pip install -q \ |
| -r "$_CHIP_ROOT/scripts/setup/requirements.$platform.txt" \ |
| -c "$_CHIP_ROOT/scripts/setup/constraints.txt" |
| fi |
| done |
| IFS=$_OLD_IFS |
| unset _OLD_IFS |
| unset _PLATFORMS |
| fi |
| |
| unset _SETUP_PLATFORM |
| } |
| |
| _submodules_need_updating() { |
| # Validates if a set of submodules that should always be checked out are up to date. |
| |
| # Pigweed will be up to date on an initial setup, however it may change over time. |
| # The rest are a small subset of things that are always checked out (have no platform attachment). |
| _SUBMODULE_PATHS=( |
| "third_party/pigweed/repo" |
| "third_party/openthread/repo" |
| "third_party/editline/repo" |
| ) |
| |
| for submodule_path in "${_SUBMODULE_PATHS[@]}"; do |
| if git submodule status "$submodule_path" | grep -E '^-' >/dev/null 2>&1; then |
| echo "git shows that $submodule_path has changes" |
| unset _SUBMODULE_PATHS |
| return 0 # Success |
| fi |
| done |
| |
| unset _SUBMODULE_PATHS |
| return 1 # Failure |
| } |
| |
| _bootstrap_or_activate() { |
| if [ -n "$BASH" ]; then |
| local _BOOTSTRAP_PATH="${BASH_SOURCE[0]}" |
| else |
| local _BOOTSTRAP_PATH="$1" |
| fi |
| |
| local _BOOTSTRAP_NAME="${_BOOTSTRAP_PATH##*/}" |
| local _BOOTSTRAP_DIR="${_BOOTSTRAP_PATH%/*}" |
| # Strip off the 'scripts[/setup]' directory, leaving the root of the repo. |
| _CHIP_ROOT="$(cd "${_BOOTSTRAP_DIR%/setup}/.." >/dev/null && pwd)" |
| |
| local _CONFIG_FILE="scripts/setup/environment.json" |
| |
| if [ -n "$PW_CONFIG_FILE" ]; then |
| _CONFIG_FILE="$PW_CONFIG_FILE" |
| unset PW_CONFIG_FILE |
| fi |
| |
| PW_BRANDING_BANNER="$_CHIP_ROOT/scripts/setup/banner.txt" |
| export PW_BRANDING_BANNER |
| |
| PW_PROJECT_ROOT="$_CHIP_ROOT" |
| export PW_PROJECT_ROOT |
| |
| PW_ROOT="$_CHIP_ROOT/third_party/pigweed/repo" |
| export PW_ROOT |
| |
| # Update or init the pigweed submodule if necessary. Don't touch any other submodules. |
| if [ "$_BOOTSTRAP_NAME" = "bootstrap.sh" -a ! -f "$_CHIP_ROOT/third_party/pigweed/repo/pw_env_setup/util.sh" ]; then |
| git submodule update --init "$_CHIP_ROOT/third_party/pigweed/repo" |
| fi |
| . "$_CHIP_ROOT/third_party/pigweed/repo/pw_env_setup/util.sh" |
| |
| _chip_bootstrap_banner() { |
| if [ -z "$PW_ENVSETUP_QUIET" ] && [ -z "$PW_ENVSETUP_NO_BANNER" ]; then |
| cat "$PW_BRANDING_BANNER" |
| echo |
| fi |
| } |
| |
| local _PW_BANNER_FUNC="_chip_bootstrap_banner" |
| |
| # Default the Pigweed environment directory to be '.environment' |
| if [ -z "$PW_ENVIRONMENT_ROOT" ]; then |
| export PW_ENVIRONMENT_ROOT="$PW_PROJECT_ROOT/.environment" |
| fi |
| |
| export _PW_ACTUAL_ENVIRONMENT_ROOT="$(pw_get_env_root)" |
| local _SETUP_SH="$_PW_ACTUAL_ENVIRONMENT_ROOT/activate.sh" |
| |
| export PW_DOCTOR_SKIP_CIPD_CHECKS=1 |
| export PATH # https://bugs.chromium.org/p/pigweed/issues/detail?id=281 |
| |
| local _PIGWEED_CIPD_JSON="$_CHIP_ROOT/third_party/pigweed/repo/pw_env_setup/py/pw_env_setup/cipd_setup/pigweed.json" |
| mkdir -p "$_PW_ACTUAL_ENVIRONMENT_ROOT" |
| local _GENERATED_PIGWEED_CIPD_JSON="$_PW_ACTUAL_ENVIRONMENT_ROOT/pigweed.json" |
| $_CHIP_ROOT/scripts/setup/gen_pigweed_cipd_json.py -i $_PIGWEED_CIPD_JSON -o $_GENERATED_PIGWEED_CIPD_JSON |
| |
| if test -n "$GITHUB_ACTION"; then |
| tee <<EOF >"${_PW_ACTUAL_ENVIRONMENT_ROOT}/pip.conf" |
| [global] |
| cache-dir = ${_PW_ACTUAL_ENVIRONMENT_ROOT}/pip-cache |
| EOF |
| export PIP_CONFIG_FILE="$_PW_ACTUAL_ENVIRONMENT_ROOT/pip.conf" |
| fi |
| |
| if [ "$_BOOTSTRAP_NAME" = "bootstrap.sh" ] || |
| [ ! -f "$_SETUP_SH" ] || |
| [ ! -s "$_SETUP_SH" ]; then |
| pw_bootstrap --shell-file "$_SETUP_SH" \ |
| --install-dir "$_PW_ACTUAL_ENVIRONMENT_ROOT" \ |
| --config-file "$_CHIP_ROOT/$_CONFIG_FILE" \ |
| --virtualenv-gn-out-dir "$_PW_ACTUAL_ENVIRONMENT_ROOT/gn_out" \ |
| --additional-cipd-file "$_GENERATED_PIGWEED_CIPD_JSON" |
| pw_finalize bootstrap "$_SETUP_SH" |
| _ACTION_TAKEN="bootstrap" |
| else |
| pw_activate |
| pw_finalize activate "$_SETUP_SH" |
| _ACTION_TAKEN="activate" |
| fi |
| } |
| |
| # remember PW_ENVIRONMENT_ROOT so that things like another |
| # bootstrap or run_in_build_env.sh can be executed in a build env |
| _ORIGINAL_PW_ENVIRONMENT_ROOT="$PW_ENVIRONMENT_ROOT" |
| |
| # pigweed does not seem to handle pwd involving symlinks very well. |
| original_pwd=$PWD |
| if hash realpath 2>/dev/null; then |
| realpwd="$(realpath "$PWD")" |
| if [ "$realpwd" != "$PWD" ]; then |
| echo "Warning: $PWD contains symlinks, using $realpwd instead" |
| cd "$realpwd" |
| fi |
| fi |
| |
| _bootstrap_or_activate "$0" |
| |
| cd $original_pwd |
| |
| if [ "$_ACTION_TAKEN" = "bootstrap" ]; then |
| # By default, install all extra pip dependencies even if slow. -p/--platform |
| # arguments may override this default. |
| _install_additional_pip_requirements "all" "$@" |
| else |
| _install_additional_pip_requirements "none" "$@" |
| fi |
| |
| # Load bash completion helper if running bash |
| if [ -n "$BASH" ]; then |
| . "$_CHIP_ROOT/scripts/helpers/bash-completion.sh" |
| fi |
| |
| unset -f _bootstrap_or_activate |
| unset -f _install_additional_pip_requirements |
| |
| pw_cleanup |
| |
| if _submodules_need_updating; then |
| # yellow output |
| if which tput >/dev/null; then tput setaf 3; fi |
| |
| echo "Some submodules seem out of date." |
| echo "For a clean checkout, consider running:" |
| echo " ./scripts/checkout_submodules.py --shallow --platform <your-platform>" |
| echo "OR for a full checkout:" |
| echo " git submodules update -f --init --recursive" |
| |
| # reset output |
| if which tput >/dev/null; then tput sgr0; fi |
| fi |
| |
| unset _ACTION_TAKEN |
| unset _CHIP_ROOT |
| unset PW_CIPD_INSTALL_DIR |
| unset _PW_BANNER_FUNC |
| unset _PW_TEXT |
| unset PW_DOCTOR_SKIP_CIPD_CHECKS |
| |
| unset -f _chip_bootstrap_banner |
| |
| if [ -n "$_ORIGINAL_PW_ENVIRONMENT_ROOT" ]; then |
| export PW_ENVIRONMENT_ROOT="$_ORIGINAL_PW_ENVIRONMENT_ROOT" |
| fi |