src/app/tests/suites/certification/Test_TC_MOD_3_3.yaml

# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: 81.3.3. [TC-MOD-3.3] OTA Mode Verification (DUT as Server)

PICS:
    - MOD.S.A0004

config:
    nodeId: 0x12344321
    cluster: "Mode Select"
    endpoint: 1
    #Configure newmode value
    NewMode:
        type: int8u
        defaultValue: 7

tests:
    - label:
          "Commission DUT to TH (can be skipped if done in a preceding test)."
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "Step 1: TH reads the StartUpMode attribute from the DUT"
      PICS: MOD.S.A0004
      command: "readAttribute"
      attribute: "StartUpMode"
      response:
          saveAs: StartUpModeValue
          constraints:
              type: int8u

    - label: "Step 2a: TH reads the CurrentMode attribute from the DUT"
      PICS: MOD.S.A0003
      command: "readAttribute"
      attribute: "CurrentMode"
      response:
          saveAs: CurrentModeValue
          constraints:
              type: int8u

    - label:
          "Step 2b: If the StartUpMode and CurrentMode attributes have the same
          value, proceed to step 2c, Otherwise proceed to step 3a"
      PICS: MOD.S.A0003 && MOD.S.A0004
      cluster: "EqualityCommands"
      command: "UnsignedNumberEquals"
      arguments:
          values:
              - name: "Value1"
                value: StartUpModeValue
              - name: "Value2"
                value: CurrentModeValue
      response:
          - values:
                - name: "Equals"
                  saveAs: IsExpectedValue

    - label: "Step 2c: TH reads the SupportedModes attribute from the DUT"
      runIf: IsExpectedValue
      PICS: MOD.S.A0002
      command: "readAttribute"
      attribute: "SupportedModes"
      response:
          constraints:
              type: list

    - label:
          "Step 2d: Select a value from the list in step 2c with a different
          value than the StartUpMode value read in step 1. TH sends a
          ChangeToMode command to the DUT with the selected value"
      runIf: IsExpectedValue
      PICS: MOD.S.A0002 && MOD.S.C00.Rsp
      command: "ChangeToMode"
      arguments:
          values:
              - name: "NewMode"
                value: NewMode

    - label:
          "Step 3a: Perform an OTA update on the device that requires a reboot.
          Allow for the DUT to update and fully reboot."
      verification: |
          To perform an OTA update on Thread device follow the cmmds below:

          Step-1 :Run the below command in the path, Where we built the OTA provider app . (In this example , the path is  connectedhomeip/out/debug ./chip-ota-provider-app -f  )

          ./chip-ota-provider-app -f ~/chip_repos/connectedhomeip/examples/all-clusters-app/nrfconnect/build2/zephyr/matter.ota

          Execute the  command using chip-tool and verify the response as below.

          Step-2: ./chip-tool pairing onnetwork 2 20202021

          [1659104612.593187][62366:62371] CHIP:CTL: Successfully finished commissioning step 'ReadCommissioningInfo'

          Step-3 : ./chip-tool accesscontrol write acl '[{"fabricIndex": 1, "privilege": 5, "authMode": 2, "subjects": [112233], "targets": null}, {"fabricIndex": 1, "privilege": 3, "authMode": 2, "subjects": null, "targets": [{"cluster": 41, "endpoint": null, "deviceType": null}]}]' 2 0

          [1651101661960] [90832:7598169] CHIP: [DMG]                                 status = 0x00 (SUCCESS),


          Step-4: ./chip-tool otasoftwareupdaterequestor write default-otaproviders '[{"fabricIndex": 1, "providerNodeID": 2, "endpoint": 0}]' 1 0

          Step-5: ./chip-tool otasoftwareupdaterequestor announce-otaprovider 2 0 0 0 1 0

          Make sure the OTA update is succesful. Refer OTA testcases for the command & its output. .
      cluster: "LogCommands"
      command: "UserPrompt"
      PICS: PICS_USER_PROMPT
      arguments:
          values:
              - name: "message"
                value: "Please enter 'y' for success"
              - name: "expectedValue"
                value: "y"

    - label: "Wait for the commissioned device to be retrieved"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "Step 3b: TH reads the CurrentMode attribute from the DUT"
      PICS: MOD.S.A0003
      command: "readAttribute"
      attribute: "CurrentMode"
      response:
          constraints:
              anyOf: [NewMode, CurrentModeValue]