| # Copyright (c) 2022-2024 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import logging |
| import os |
| import shlex |
| from enum import Enum, auto |
| from typing import Optional |
| |
| from .builder import Builder, BuilderOutput |
| |
| |
| class TelinkApp(Enum): |
| AIR_QUALITY_SENSOR = auto() |
| ALL_CLUSTERS = auto() |
| ALL_CLUSTERS_MINIMAL = auto() |
| BRIDGE = auto() |
| CONTACT_SENSOR = auto() |
| LIGHT = auto() |
| SWITCH = auto() |
| LOCK = auto() |
| OTA_REQUESTOR = auto() |
| PUMP = auto() |
| PUMP_CONTROLLER = auto() |
| SHELL = auto() |
| SMOKE_CO_ALARM = auto() |
| TEMPERATURE_MEASUREMENT = auto() |
| THERMOSTAT = auto() |
| WINDOW_COVERING = auto() |
| |
| def ExampleName(self): |
| if self == TelinkApp.AIR_QUALITY_SENSOR: |
| return 'air-quality-sensor-app' |
| elif self == TelinkApp.ALL_CLUSTERS: |
| return 'all-clusters-app' |
| elif self == TelinkApp.ALL_CLUSTERS_MINIMAL: |
| return 'all-clusters-minimal-app' |
| elif self == TelinkApp.BRIDGE: |
| return 'bridge-app' |
| elif self == TelinkApp.CONTACT_SENSOR: |
| return 'contact-sensor-app' |
| elif self == TelinkApp.LIGHT: |
| return 'lighting-app' |
| elif self == TelinkApp.SWITCH: |
| return 'light-switch-app' |
| elif self == TelinkApp.LOCK: |
| return 'lock-app' |
| elif self == TelinkApp.OTA_REQUESTOR: |
| return 'ota-requestor-app' |
| elif self == TelinkApp.PUMP: |
| return 'pump-app' |
| elif self == TelinkApp.PUMP_CONTROLLER: |
| return 'pump-controller-app' |
| elif self == TelinkApp.SHELL: |
| return 'shell' |
| elif self == TelinkApp.SMOKE_CO_ALARM: |
| return 'smoke-co-alarm-app' |
| elif self == TelinkApp.TEMPERATURE_MEASUREMENT: |
| return 'temperature-measurement-app' |
| elif self == TelinkApp.THERMOSTAT: |
| return 'thermostat' |
| elif self == TelinkApp.WINDOW_COVERING: |
| return 'window-app' |
| else: |
| raise Exception('Unknown app type: %r' % self) |
| |
| def AppNamePrefix(self): |
| if self == TelinkApp.AIR_QUALITY_SENSOR: |
| return 'chip-telink-air-quality-sensor-example' |
| elif self == TelinkApp.ALL_CLUSTERS: |
| return 'chip-telink-all-clusters-example' |
| elif self == TelinkApp.ALL_CLUSTERS_MINIMAL: |
| return 'chip-telink-all-clusters-minimal-example' |
| elif self == TelinkApp.BRIDGE: |
| return 'chip-telink-bridge-example' |
| elif self == TelinkApp.CONTACT_SENSOR: |
| return 'chip-telink-contact-sensor-example' |
| elif self == TelinkApp.LIGHT: |
| return 'chip-telink-lighting-example' |
| elif self == TelinkApp.SWITCH: |
| return 'chip-telink-light-switch-example' |
| elif self == TelinkApp.LOCK: |
| return 'chip-telink-lock-example' |
| elif self == TelinkApp.OTA_REQUESTOR: |
| return 'chip-telink-ota-requestor-example' |
| elif self == TelinkApp.PUMP: |
| return 'chip-telink-pump-example' |
| elif self == TelinkApp.PUMP_CONTROLLER: |
| return 'chip-telink-pump-controller-example' |
| elif self == TelinkApp.RESOURCE_MONITORING: |
| return 'chip-telink-resource-monitoring-example' |
| elif self == TelinkApp.SHELL: |
| return 'chip-telink-shell-example' |
| elif self == TelinkApp.SMOKE_CO_ALARM: |
| return 'chip-telink-smoke-co-alarm-example' |
| elif self == TelinkApp.TEMPERATURE_MEASUREMENT: |
| return 'chip-telink-temperature-measurement-example' |
| elif self == TelinkApp.THERMOSTAT: |
| return 'chip-telink-thermostat-example' |
| elif self == TelinkApp.WINDOW_COVERING: |
| return 'chip-telink-window-example' |
| else: |
| raise Exception('Unknown app type: %r' % self) |
| |
| |
| class TelinkBoard(Enum): |
| TLRS9118BDK40D = auto() |
| TLSR9518ADK80D = auto() |
| TLSR9528A = auto() |
| TLSR9528A_RETENTION = auto() |
| TLSR9258A = auto() |
| TLSR9258A_RETENTION = auto() |
| |
| def GnArgName(self): |
| if self == TelinkBoard.TLRS9118BDK40D: |
| return 'tlsr9118bdk40d' |
| elif self == TelinkBoard.TLSR9518ADK80D: |
| return 'tlsr9518adk80d' |
| elif self == TelinkBoard.TLSR9528A: |
| return 'tlsr9528a' |
| elif self == TelinkBoard.TLSR9528A_RETENTION: |
| return 'tlsr9528a_retention' |
| elif self == TelinkBoard.TLSR9258A: |
| return 'tlsr9258a' |
| elif self == TelinkBoard.TLSR9258A_RETENTION: |
| return 'tlsr9258a_retention' |
| else: |
| raise Exception('Unknown board type: %r' % self) |
| |
| |
| class TelinkBuilder(Builder): |
| |
| def __init__(self, |
| root, |
| runner, |
| app: TelinkApp = TelinkApp, |
| board: TelinkBoard = TelinkBoard, |
| enable_ota: bool = False, |
| enable_dfu: bool = False, |
| enable_shell: bool = False, |
| enable_rpcs: bool = False, |
| enable_factory_data: bool = False, |
| enable_4mb_flash: bool = False, |
| mars_board_config: bool = False, |
| usb_board_config: bool = False, |
| compress_lzma_config: bool = False, |
| ): |
| super(TelinkBuilder, self).__init__(root, runner) |
| self.app = app |
| self.board = board |
| self.enable_ota = enable_ota |
| self.enable_dfu = enable_dfu |
| self.enable_shell = enable_shell |
| self.enable_rpcs = enable_rpcs |
| self.enable_factory_data = enable_factory_data |
| self.enable_4mb_flash = enable_4mb_flash |
| self.mars_board_config = mars_board_config |
| self.usb_board_config = usb_board_config |
| self.compress_lzma_config = compress_lzma_config |
| |
| def get_cmd_prefixes(self): |
| if not self._runner.dry_run: |
| # Zephyr base |
| if 'TELINK_ZEPHYR_BASE' not in os.environ: |
| raise Exception("Telink builds require TELINK_ZEPHYR_BASE") |
| |
| cmd = 'export ZEPHYR_TOOLCHAIN_VARIANT=zephyr\n' |
| cmd += 'export ZEPHYR_BASE="$TELINK_ZEPHYR_BASE"\n' |
| |
| if 'TELINK_ZEPHYR_SDK_DIR' in os.environ: |
| cmd += 'export ZEPHYR_SDK_INSTALL_DIR="$TELINK_ZEPHYR_SDK_DIR"\n' |
| |
| return cmd |
| |
| def generate(self): |
| if os.path.exists(self.output_dir): |
| return |
| |
| flags = [] |
| if self.enable_ota: |
| flags.append("-DCONFIG_CHIP_OTA_REQUESTOR=y") |
| |
| if self.enable_dfu: |
| flags.append("-DCONFIG_BOOTLOADER_MCUBOOT=y") |
| |
| if self.enable_shell: |
| flags.append("-DCONFIG_CHIP_LIB_SHELL=y") |
| |
| if self.enable_rpcs: |
| flags.append("-DOVERLAY_CONFIG=rpc.overlay") |
| |
| if self.enable_factory_data: |
| flags.append("-DCONFIG_CHIP_FACTORY_DATA=y -DCONFIG_CHIP_FACTORY_DATA_BUILD=y -DCONFIG_CHIP_FACTORY_DATA_MERGE_WITH_FIRMWARE=y") |
| |
| if self.enable_4mb_flash: |
| flags.append("-DFLASH_SIZE=4m") |
| |
| if self.mars_board_config: |
| flags.append("-DTLNK_MARS_BOARD=y") |
| |
| if self.usb_board_config: |
| flags.append("-DTLNK_USB_DONGLE=y") |
| |
| if self.compress_lzma_config: |
| flags.append("-DCONFIG_COMPRESS_LZMA=y") |
| |
| if self.options.pregen_dir: |
| flags.append(f"-DCHIP_CODEGEN_PREGEN_DIR={shlex.quote(self.options.pregen_dir)}") |
| |
| build_flags = " -- " + " ".join(flags) if len(flags) > 0 else "" |
| |
| cmd = self.get_cmd_prefixes() |
| cmd += '\nsource "$ZEPHYR_BASE/zephyr-env.sh";' |
| |
| cmd += '\nwest build --cmake-only -d {outdir} -b {board} {sourcedir}{build_flags}\n'.format( |
| outdir=shlex.quote(self.output_dir), |
| board=self.board.GnArgName(), |
| sourcedir=shlex.quote(os.path.join(self.root, 'examples', self.app.ExampleName(), 'telink')), |
| build_flags=build_flags).strip() |
| |
| self._Execute(['bash', '-c', cmd], |
| title='Generating ' + self.identifier) |
| |
| def _build(self): |
| logging.info('Compiling Telink at %s', self.output_dir) |
| |
| cmd = self.get_cmd_prefixes() + ("ninja -C %s" % self.output_dir) |
| |
| if self.ninja_jobs is not None: |
| cmd += " -j%s" % str(self.ninja_jobs) |
| |
| self._Execute(['bash', '-c', cmd], title='Building ' + self.identifier) |
| |
| def build_outputs(self): |
| yield BuilderOutput( |
| os.path.join(self.output_dir, 'zephyr', 'zephyr.elf'), |
| '%s.elf' % self.app.AppNamePrefix()) |
| if self.options.enable_link_map_file: |
| yield BuilderOutput( |
| os.path.join(self.output_dir, 'zephyr', 'zephyr.map'), |
| '%s.map' % self.app.AppNamePrefix()) |
