blob: 271c9b02e10d9f3575be543953a09be3c3374d1e [file] [log] [blame]
/*
*
* Copyright (c) 2020-2021 Project CHIP Authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @file
* Provides an implementation of the BLEManager singleton object
* for the Qorvo QPG platforms.
*/
/* this file behaves like a config.h, comes first */
#include <platform/internal/CHIPDeviceLayerInternal.h>
#if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
#include <ble/Ble.h>
#include <platform/CommissionableDataProvider.h>
#include <platform/internal/BLEManager.h>
#include <lib/support/CodeUtils.h>
#include <lib/support/logging/CHIPLogging.h>
#if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING
#include <setup_payload/AdditionalDataPayloadGenerator.h>
#if CHIP_ENABLE_ROTATING_DEVICE_ID
#include <platform/DeviceInstanceInfoProvider.h>
#endif /* CHIP_ENABLE_ROTATING_DEVICE_ID */
#endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */
using namespace ::chip;
using namespace ::chip::Ble;
using namespace ::chip::System;
namespace chip {
namespace DeviceLayer {
namespace Internal {
namespace {
// Advertising data content definitions
#define CHIP_ADV_DATA_TYPE_FLAGS 0x01
#define CHIP_ADV_DATA_TYPE_UUID 0x03
#define CHIP_ADV_DATA_FLAGS 0x06
#define CHIP_ADV_DATA_TYPE_NAME 0x09
#define CHIP_ADV_DATA_TYPE_SERVICE_DATA 0x16
#define CHIP_ADV_SHORT_UUID_LEN 2
// FreeeRTOS sw timer
TimerHandle_t sbleAdvTimeoutTimer;
StaticTimer_t sbleAdvTimeoutTimerBuffer;
// Full service UUID - CHIP_BLE_SVC_ID - taken from BleUUID.h header
const uint8_t chipUUID_CHIPoBLE_Service[CHIP_ADV_SHORT_UUID_LEN] = { 0xFF, 0xF6 };
const ChipBleUUID chipUUID_CHIPoBLEChar_RX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F,
0x9D, 0x11 } };
const ChipBleUUID chipUUID_CHIPoBLEChar_TX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F,
0x9D, 0x12 } };
#if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING
const ChipBleUUID chipUUID_CHIPoBLEChar_C3 = { { 0x64, 0x63, 0x02, 0x38, 0x87, 0x72, 0x45, 0xF2, 0xB8, 0x7D, 0x74, 0x8A, 0x83, 0x21,
0x8F, 0x04 } };
#endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */
} // unnamed namespace
BLEManagerImpl BLEManagerImpl::sInstance;
CHIP_ERROR BLEManagerImpl::_Init()
{
CHIP_ERROR err;
mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Enabled;
mFlags.ClearAll().Set(Flags::kAdvertisingEnabled, CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART);
mFlags.Set(Flags::kFastAdvertisingEnabled);
mNumGAPCons = 0;
for (int i = 0; i < kMaxConnections; i++)
{
mSubscribedConIds[i] = BLE_CONNECTION_UNINITIALIZED;
}
// Initialize the CHIP BleLayer.
err = BleLayer::Init(this, this, &DeviceLayer::SystemLayer());
SuccessOrExit(err);
appCbacks.stackCback = ExternalCbHandler;
appCbacks.chrReadCback = HandleTXCharRead;
appCbacks.chrWriteCback = HandleRXCharWrite;
appCbacks.cccCback = _handleTXCharCCCDWrite;
#if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING
qvCHIP_BleSetUUIDs(chipUUID_CHIPoBLE_Service, chipUUID_CHIPoBLEChar_TX.bytes, chipUUID_CHIPoBLEChar_RX.bytes,
chipUUID_CHIPoBLEChar_C3.bytes);
#else
qvCHIP_BleSetUUIDs(chipUUID_CHIPoBLE_Service, chipUUID_CHIPoBLEChar_TX.bytes, chipUUID_CHIPoBLEChar_RX.bytes, nullptr);
#endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */
qvCHIP_BleInit(&appCbacks);
// Create FreeRTOS sw timer for BLE timeouts and interval change.
#if defined(CHIP_CONFIG_FREERTOS_USE_STATIC_TASK) && CHIP_CONFIG_FREERTOS_USE_STATIC_TASK
sbleAdvTimeoutTimer = xTimerCreateStatic("BleAdvTimer", // Just a text name, not used by the RTOS kernel
1, // == default timer period (mS)
false, // no timer reload (==one-shot)
(void *) this, // init timer id = ble obj context
BleAdvTimeoutHandler, // timer callback handler
&sbleAdvTimeoutTimerBuffer // static buffer for timer
);
#else
sbleAdvTimeoutTimer = xTimerCreate("BleAdvTimer", // Just a text name, not used by the RTOS kernel
1, // == default timer period (mS)
false, // no timer reload (==one-shot)
(void *) this, // init timer id = ble obj context
BleAdvTimeoutHandler // timer callback handler
);
#endif
VerifyOrExit(sbleAdvTimeoutTimer != NULL, err = CHIP_ERROR_INCORRECT_STATE);
PlatformMgr().ScheduleWork(DriveBLEState, 0);
exit:
ChipLogProgress(DeviceLayer, "BLEManagerImpl::Init() complete");
return err;
}
CHIP_ERROR BLEManagerImpl::_SetAdvertisingEnabled(bool val)
{
CHIP_ERROR err = CHIP_NO_ERROR;
VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE);
if (mFlags.Has(Flags::kAdvertisingEnabled) != val)
{
mFlags.Set(Flags::kAdvertisingEnabled, val);
PlatformMgr().ScheduleWork(DriveBLEState, 0);
}
exit:
return err;
}
CHIP_ERROR BLEManagerImpl::_SetAdvertisingMode(BLEAdvertisingMode mode)
{
switch (mode)
{
case BLEAdvertisingMode::kFastAdvertising:
mFlags.Set(Flags::kFastAdvertisingEnabled);
break;
case BLEAdvertisingMode::kSlowAdvertising:
mFlags.Clear(Flags::kFastAdvertisingEnabled);
break;
default:
return CHIP_ERROR_INVALID_ARGUMENT;
}
mFlags.Set(Flags::kAdvertisingRefreshNeeded);
PlatformMgr().ScheduleWork(DriveBLEState, 0);
return CHIP_NO_ERROR;
}
CHIP_ERROR BLEManagerImpl::_GetDeviceName(char * buf, size_t bufSize)
{
CHIP_ERROR err;
err = MapBLEError(qvCHIP_BleGetDeviceName(buf, bufSize));
return err;
}
CHIP_ERROR BLEManagerImpl::_SetDeviceName(const char * devName)
{
CHIP_ERROR err = CHIP_NO_ERROR;
VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE);
if (devName != nullptr && devName[0] != 0)
{
err = MapBLEError(qvCHIP_BleSetDeviceName(devName));
SuccessOrExit(err);
mFlags.Set(Flags::kDeviceNameSet);
}
exit:
return err;
}
void BLEManagerImpl::_OnPlatformEvent(const ChipDeviceEvent * event)
{
switch (event->Type)
{
// Platform specific events
case DeviceEventType::kCHIPoBLESubscribe: {
ChipDeviceEvent connEstEvent;
ChipLogProgress(DeviceLayer, "_OnPlatformEvent kCHIPoBLESubscribe");
HandleSubscribeReceived(event->CHIPoBLESubscribe.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX);
connEstEvent.Type = DeviceEventType::kCHIPoBLEConnectionEstablished;
PlatformMgr().PostEventOrDie(&connEstEvent);
}
break;
case DeviceEventType::kCHIPoBLEUnsubscribe: {
ChipDeviceEvent connClosedEvent;
ChipLogProgress(DeviceLayer, "_OnPlatformEvent kCHIPoBLEUnsubscribe");
HandleUnsubscribeReceived(event->CHIPoBLEUnsubscribe.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX);
connClosedEvent.Type = DeviceEventType::kCHIPoBLEConnectionClosed;
PlatformMgr().PostEventOrDie(&connClosedEvent);
}
break;
case DeviceEventType::kCHIPoBLEWriteReceived: {
ChipLogProgress(DeviceLayer, "_OnPlatformEvent kCHIPoBLEWriteReceived");
HandleWriteReceived(event->CHIPoBLEWriteReceived.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_RX,
PacketBufferHandle::Adopt(event->CHIPoBLEWriteReceived.Data));
}
break;
case DeviceEventType::kCHIPoBLEConnectionError: {
ChipLogProgress(DeviceLayer, "_OnPlatformEvent kCHIPoBLEConnectionError");
HandleConnectionError(event->CHIPoBLEConnectionError.ConId, event->CHIPoBLEConnectionError.Reason);
}
break;
// Generic CHIP events
case DeviceEventType::kServiceProvisioningChange:
// Force the advertising state to be refreshed to reflect new provisioning state.
mFlags.Set(Flags::kAdvertisingRefreshNeeded);
PlatformMgr().ScheduleWork(DriveBLEState, 0);
break;
case DeviceEventType::kCHIPoBLEIndicateConfirm: {
ChipLogProgress(DeviceLayer, "_OnPlatformEvent kCHIPoBLEIndicateConfirm");
HandleIndicationConfirmation(event->CHIPoBLEIndicateConfirm.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX);
}
break;
default:
ChipLogProgress(DeviceLayer, "_OnPlatformEvent default: event->Type = %d", event->Type);
break;
}
}
bool BLEManagerImpl::SubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId)
{
ChipLogProgress(DeviceLayer, "BLEManagerImpl::SubscribeCharacteristic() not supported");
return false;
}
bool BLEManagerImpl::UnsubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId)
{
ChipLogProgress(DeviceLayer, "BLEManagerImpl::UnsubscribeCharacteristic() not supported");
return false;
}
bool BLEManagerImpl::CloseConnection(BLE_CONNECTION_OBJECT conId)
{
CHIP_ERROR err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE;
ChipLogProgress(DeviceLayer, "Closing BLE GATT connection (con %u)", conId);
err = MapBLEError(qvCHIP_BleCloseConnection(conId));
if (err != CHIP_NO_ERROR)
{
ChipLogError(DeviceLayer, "qvCHIP_BleCloseConnection() failed: %s", ErrorStr(err));
}
return (err == CHIP_NO_ERROR);
}
uint16_t BLEManagerImpl::GetMTU(BLE_CONNECTION_OBJECT conId) const
{
uint16_t retVal = 0;
CHIP_ERROR err = MapBLEError(qvCHIP_BleGetMTU(conId, &retVal));
if (err != CHIP_NO_ERROR)
{
ChipLogError(DeviceLayer, "qvCHIP_BleGetMTU() failed: %s", ErrorStr(err));
}
return retVal;
}
bool BLEManagerImpl::SendIndication(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId,
PacketBufferHandle data)
{
CHIP_ERROR err = CHIP_NO_ERROR;
bool isRxHandle;
uint16_t cId;
uint16_t dataLen = data->DataLength();
VerifyOrExit(IsSubscribed(conId), err = CHIP_ERROR_INVALID_ARGUMENT);
ChipLogDetail(DeviceLayer, "Sending indication for CHIPoBLE Client TX (con %u, len %u)", conId, dataLen);
isRxHandle = UUIDsMatch(&chipUUID_CHIPoBLEChar_RX, charId);
cId = qvCHIP_BleGetHandle(isRxHandle);
qvCHIP_BleSendIndication(conId, cId, dataLen, data->Start());
exit:
if (err != CHIP_NO_ERROR)
{
ChipLogError(DeviceLayer, "BLEManagerImpl::SendIndication() failed: %s", ErrorStr(err));
return false;
}
return true;
}
bool BLEManagerImpl::SendWriteRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId,
PacketBufferHandle pBuf)
{
ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendWriteRequest() not supported");
return false;
}
bool BLEManagerImpl::SendReadRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId,
PacketBufferHandle pBuf)
{
ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendReadRequest() not supported");
return false;
}
bool BLEManagerImpl::SendReadResponse(BLE_CONNECTION_OBJECT conId, BLE_READ_REQUEST_CONTEXT requestContext,
const ChipBleUUID * svcId, const ChipBleUUID * charId)
{
ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendReadResponse() not supported");
return false;
}
void BLEManagerImpl::NotifyChipConnectionClosed(BLE_CONNECTION_OBJECT conId)
{
// Nothing to do
}
CHIP_ERROR BLEManagerImpl::MapBLEError(int bleErr) const
{
CHIP_ERROR err;
switch (bleErr)
{
case QV_STATUS_NO_ERROR: {
err = CHIP_NO_ERROR;
break;
}
case QV_STATUS_BUFFER_TOO_SMALL: {
err = CHIP_ERROR_BUFFER_TOO_SMALL;
break;
}
case QV_STATUS_INVALID_ARGUMENT: {
err = CHIP_ERROR_INVALID_ARGUMENT;
break;
}
default: {
err = CHIP_ERROR_INCORRECT_STATE;
}
}
return err;
}
void BLEManagerImpl::DriveBLEState(void)
{
CHIP_ERROR err = CHIP_NO_ERROR;
// Perform any initialization actions that must occur after the CHIP task is running.
if (!mFlags.Has(Flags::kAsyncInitCompleted))
{
mFlags.Set(Flags::kAsyncInitCompleted);
}
// If the application has enabled CHIPoBLE and BLE advertising...
if (mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_Enabled &&
mFlags.Has(Flags::kAdvertisingEnabled)
#if CHIP_DEVICE_CONFIG_CHIPOBLE_SINGLE_CONNECTION
// and no connections are active...
&& (mNumGAPCons == 0)
#endif
)
{
// Start/re-start BLE advertising if not already advertising, or if the
// advertising state of the underlying stack needs to be refreshed.
if (!mFlags.Has(Flags::kAdvertising) || mFlags.Has(Flags::kAdvertisingRefreshNeeded))
{
mFlags.Clear(Flags::kAdvertisingRefreshNeeded);
err = StartAdvertising();
SuccessOrExit(err);
}
}
// Otherwise, stop advertising if currently active.
else if (mFlags.Has(Flags::kAdvertising))
{
err = StopAdvertising();
SuccessOrExit(err);
}
exit:
if (err != CHIP_NO_ERROR)
{
ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %s", ErrorStr(err));
mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled;
}
}
CHIP_ERROR BLEManagerImpl::ConfigureAdvertisingData(void)
{
ChipBLEDeviceIdentificationInfo mDeviceIdInfo;
CHIP_ERROR err;
uint8_t index = 0;
uint8_t deviceNameLength = 0;
uint8_t deviceIdInfoLength = 0;
char deviceName[kMaxDeviceNameLength + 1];
uint8_t advDataBuf[kMaxAdvertisementDataSetSize];
uint8_t scanRespDataBuf[kMaxAdvertisementDataSetSize];
memset(advDataBuf, 0, kMaxAdvertisementDataSetSize);
memset(scanRespDataBuf, 0, kMaxAdvertisementDataSetSize);
err = ConfigurationMgr().GetBLEDeviceIdentificationInfo(mDeviceIdInfo);
SuccessOrExit(err);
if (!mFlags.Has(Flags::kDeviceNameSet))
{
uint16_t discriminator;
SuccessOrExit(err = GetCommissionableDataProvider()->GetSetupDiscriminator(discriminator));
snprintf(deviceName, sizeof(deviceName), "%s%04u", CHIP_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX, discriminator);
deviceName[kMaxDeviceNameLength] = 0;
err = MapBLEError(qvCHIP_BleSetDeviceName(deviceName));
SuccessOrExit(err);
}
deviceNameLength = static_cast<uint8_t>(strlen(deviceName));
deviceIdInfoLength = sizeof(mDeviceIdInfo);
// Check sizes
static_assert(sizeof(mDeviceIdInfo) + CHIP_ADV_SHORT_UUID_LEN + 1 <= UINT8_MAX, "Our length won't fit in a uint8_t");
static_assert(2 + CHIP_ADV_SHORT_UUID_LEN + sizeof(mDeviceIdInfo) + 1 <= kMaxAdvertisementDataSetSize,
"Advertisement data buffer is not big enough");
// Fill in advertising data
index = 0;
advDataBuf[index++] = 0x02; // length
advDataBuf[index++] = CHIP_ADV_DATA_TYPE_FLAGS; // AD type : flags
advDataBuf[index++] = CHIP_ADV_DATA_FLAGS; // AD value
advDataBuf[index++] = static_cast<uint8_t>(deviceIdInfoLength + CHIP_ADV_SHORT_UUID_LEN + 1); // AD length
advDataBuf[index++] = CHIP_ADV_DATA_TYPE_SERVICE_DATA; // AD type : Service Data
advDataBuf[index++] = chipUUID_CHIPoBLE_Service[1]; // AD value
advDataBuf[index++] = chipUUID_CHIPoBLE_Service[0];
memcpy(&advDataBuf[index], (void *) &mDeviceIdInfo, deviceIdInfoLength); // AD value
index = static_cast<uint8_t>(index + deviceIdInfoLength);
qvCHIP_BleSetAdvData(QV_ADV_DATA_LOC_ADV, index, advDataBuf);
// Fill in scan response data
index = 0;
scanRespDataBuf[index++] = CHIP_ADV_SHORT_UUID_LEN + 1; // AD length
scanRespDataBuf[index++] = CHIP_ADV_DATA_TYPE_UUID; // AD type : uuid
scanRespDataBuf[index++] = chipUUID_CHIPoBLE_Service[1]; // AD value
scanRespDataBuf[index++] = chipUUID_CHIPoBLE_Service[0];
VerifyOrExit(index + (deviceNameLength + 2) <= kMaxAdvertisementDataSetSize, err = CHIP_ERROR_BUFFER_TOO_SMALL);
scanRespDataBuf[index++] = static_cast<uint8_t>(deviceNameLength + 1); // length
scanRespDataBuf[index++] = CHIP_ADV_DATA_TYPE_NAME; // AD type : name
memcpy(&scanRespDataBuf[index], deviceName, deviceNameLength); // AD value
index = static_cast<uint8_t>(index + deviceNameLength);
qvCHIP_BleSetAdvData(QV_ADV_DATA_LOC_SCAN, index, scanRespDataBuf);
exit:
return err;
}
CHIP_ERROR BLEManagerImpl::StartAdvertising(void)
{
CHIP_ERROR err;
uint16_t intervalMin;
uint16_t intervalMax;
// If already advertising, stop it, before changing values
if (mFlags.Has(Flags::kAdvertising) || mFlags.Has(Flags::kEnablingAdvertising))
{
err = MapBLEError(qvCHIP_BleStopAdvertising());
SuccessOrExit(err);
}
else
{
ChipLogProgress(DeviceLayer, "CHIPoBLE start advertising");
}
if (!qvCHIP_IsBleTaskCreated())
{
qvCHIP_BleTaskCreate();
}
#if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING
err = PrepareAdditionalData();
SuccessOrExit(err);
#endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */
err = ConfigureAdvertisingData();
SuccessOrExit(err);
mFlags.Clear(Flags::kRestartAdvertising);
if (mFlags.Has(Flags::kFastAdvertisingEnabled))
{
intervalMin = CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MIN;
intervalMax = CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MAX;
}
else
{
intervalMin = CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MIN;
intervalMax = CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MAX;
}
qvCHIP_BleSetAdvInterval(intervalMin, intervalMax);
err = MapBLEError(qvCHIP_BleStartAdvertising());
SuccessOrExit(err);
// Flag updated asynchronously by BLE host callback
mFlags.Set(Flags::kEnablingAdvertising);
if (mFlags.Has(Flags::kFastAdvertisingEnabled))
{
StartBleAdvTimeoutTimer(CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME);
}
exit:
return err;
}
CHIP_ERROR BLEManagerImpl::StopAdvertising(void)
{
CHIP_ERROR err;
if (qvCHIP_IsBleTaskCreated() && (mNumGAPCons == 0))
{
qvCHIP_BleTaskDelete();
}
err = MapBLEError(qvCHIP_BleStopAdvertising());
SuccessOrExit(err);
CancelBleAdvTimeoutTimer();
// Transition to the not Advertising state...
if (mFlags.Has(Flags::kAdvertising))
{
mFlags.Clear(Flags::kAdvertising);
mFlags.Set(Flags::kFastAdvertisingEnabled);
ChipLogProgress(DeviceLayer, "CHIPoBLE advertising stopped");
// Post a CHIPoBLEAdvertisingChange(Stopped) event.
{
ChipDeviceEvent advChange;
advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange;
advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Stopped;
err = PlatformMgr().PostEvent(&advChange);
}
}
exit:
return err;
}
uint16_t BLEManagerImpl::_NumConnections(void)
{
uint16_t numCons = 0;
for (uint16_t i = 0; i < kMaxConnections; i++)
{
if (mSubscribedConIds[i] != BLE_CONNECTION_UNINITIALIZED)
{
numCons++;
}
}
return numCons;
}
void BLEManagerImpl::DriveBLEState(intptr_t arg)
{
sInstance.DriveBLEState();
}
void BLEManagerImpl::HandleRXCharWrite(uint16_t connId, uint16_t handle, uint8_t operation, uint16_t offset, uint16_t len,
uint8_t * pValue, qvCHIP_Ble_Attr_t * pAttr)
{
CHIP_ERROR err = CHIP_NO_ERROR;
ChipLogProgress(DeviceLayer, "Write request received for CHIPoBLE Client RX characteristic (con %u, len %u)", connId, len);
// Copy the data to a packet buffer.
PacketBufferHandle buf = System::PacketBufferHandle::NewWithData(pValue, len, 0, 0);
VerifyOrExit(!buf.IsNull(), err = CHIP_ERROR_NO_MEMORY);
// Post an event to the Chip queue to deliver the data into the Chip stack.
{
ChipDeviceEvent event;
event.Type = DeviceEventType::kCHIPoBLEWriteReceived;
event.CHIPoBLEWriteReceived.ConId = connId;
event.CHIPoBLEWriteReceived.Data = std::move(buf).UnsafeRelease();
err = PlatformMgr().PostEvent(&event);
}
exit:
if (err != CHIP_NO_ERROR)
{
ChipLogError(DeviceLayer, "HandleRXCharWrite() failed: %s", ErrorStr(err));
// TODO: fail connection???
}
}
void BLEManagerImpl::HandleTXCharCCCDWrite(qvCHIP_Ble_AttsCccEvt_t * pEvt)
{
CHIP_ERROR err = CHIP_NO_ERROR;
bool notificationsEnabled;
ChipLogProgress(DeviceLayer, "Write request received for CHIPoBLE TX characteristic CCCD (con %u, len %u)", pEvt->hdr.param, 0);
// Determine if the client is enabling or disabling notifications
notificationsEnabled = (pEvt->value != 0);
// If the client has requested to enable notifications
if (notificationsEnabled)
{
// Set subcription only the first time
if (!IsSubscribed(pEvt->hdr.param))
{
// Record that notifications have been enabled for this connection.
err = SetSubscribed(pEvt->hdr.param);
VerifyOrExit(err != CHIP_ERROR_NO_MEMORY, err = CHIP_NO_ERROR);
SuccessOrExit(err);
}
}
else
{
// If notifications had previously been enabled for this connection, record that they are no longer enabled
UnsetSubscribed(pEvt->hdr.param);
}
// Post an event to the Chip queue to process either a CHIPoBLE Subscribe or Unsubscribe based on
// whether the client is enabling or disabling notifications
{
ChipDeviceEvent event;
event.Type = (notificationsEnabled) ? DeviceEventType::kCHIPoBLESubscribe : DeviceEventType::kCHIPoBLEUnsubscribe;
event.CHIPoBLESubscribe.ConId = pEvt->hdr.param;
err = PlatformMgr().PostEvent(&event);
}
ChipLogProgress(DeviceLayer, "CHIPoBLE %s received", notificationsEnabled ? "subscribe" : "unsubscribe");
exit:
if (err != CHIP_NO_ERROR)
{
ChipLogError(DeviceLayer, "HandleTXCharCCCDWrite() failed: %s", ErrorStr(err));
// TODO: fail connection???
}
}
/* Process DM Messages */
void BLEManagerImpl::HandleDmMsg(qvCHIP_Ble_DmEvt_t * pDmEvt)
{
switch (pDmEvt->hdr.event)
{
case QVCHIP_DM_RESET_CMPL_IND: {
break;
}
case QVCHIP_DM_SCAN_START_IND: {
break;
}
case QVCHIP_DM_SCAN_STOP_IND: {
break;
}
case QVCHIP_DM_ADV_START_IND: {
if (pDmEvt->hdr.status != QVCHIP_HCI_SUCCESS)
{
ChipLogError(DeviceLayer, "QVCHIP_DM_ADV_START_IND error: %d", (int) pDmEvt->advSetStart.hdr.status);
return;
}
sInstance.mFlags.Clear(Flags::kAdvertisingRefreshNeeded);
sInstance.mFlags.Clear(Flags::kEnablingAdvertising);
// Transition to the Advertising state...
if (!sInstance.mFlags.Has(Flags::kAdvertising))
{
ChipLogProgress(DeviceLayer, "CHIPoBLE advertising started");
sInstance.mFlags.Set(Flags::kAdvertising);
// Post a CHIPoBLEAdvertisingChange(Started) event.
{
ChipDeviceEvent advChange;
advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange;
advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Started;
PlatformMgr().PostEventOrDie(&advChange);
}
}
break;
}
case QVCHIP_DM_ADV_STOP_IND: {
if (pDmEvt->hdr.status != QVCHIP_HCI_SUCCESS)
{
ChipLogError(DeviceLayer, "QVCHIP_DM_ADV_STOP_IND error: %d", (int) pDmEvt->advSetStop.status);
return;
}
if (mFlags.Has(Flags::kRestartAdvertising))
{
BLEMgr().SetAdvertisingMode(BLEAdvertisingMode::kSlowAdvertising);
}
break;
}
case QVCHIP_DM_CONN_OPEN_IND: {
ChipLogProgress(DeviceLayer, "BLE GATT connection established (con %u)", pDmEvt->connOpen.hdr.param);
// Allocate a connection state record for the new connection.
mNumGAPCons++;
// Receiving a connection stops the advertising processes. So force a refresh of the advertising
// state.
mFlags.Set(Flags::kAdvertisingRefreshNeeded);
PlatformMgr().ScheduleWork(DriveBLEState, 0);
break;
}
case QVCHIP_DM_CONN_CLOSE_IND: {
ChipLogProgress(DeviceLayer, "BLE GATT connection closed (con %u, reason %u)", pDmEvt->connClose.hdr.param,
pDmEvt->connClose.reason);
// Force a refresh of the advertising state.
if (mNumGAPCons > 0)
{
mNumGAPCons--;
}
if (qvCHIP_IsBleTaskCreated() && (mNumGAPCons == 0))
{
qvCHIP_BleTaskDelete();
}
// If this was a CHIPoBLE connection, release the associated connection state record
// and post an event to deliver a connection error to the CHIPoBLE layer.
if (UnsetSubscribed(pDmEvt->connClose.hdr.param))
{
ChipDeviceEvent event;
event.Type = DeviceEventType::kCHIPoBLEConnectionError;
event.CHIPoBLEConnectionError.ConId = pDmEvt->connClose.hdr.param;
switch (pDmEvt->connClose.reason)
{
case QVCHIP_HCI_ERR_REMOTE_TERMINATED:
event.CHIPoBLEConnectionError.Reason = BLE_ERROR_REMOTE_DEVICE_DISCONNECTED;
break;
case QVCHIP_HCI_ERR_LOCAL_TERMINATED:
event.CHIPoBLEConnectionError.Reason = BLE_ERROR_APP_CLOSED_CONNECTION;
break;
default:
event.CHIPoBLEConnectionError.Reason = BLE_ERROR_CHIPOBLE_PROTOCOL_ABORT;
break;
}
PlatformMgr().PostEventOrDie(&event);
}
mFlags.Set(Flags::kAdvertisingRefreshNeeded);
PlatformMgr().ScheduleWork(DriveBLEState, 0);
break;
}
case QVCHIP_DM_CONN_UPDATE_IND: {
break;
}
default: {
break;
}
}
}
/* Process ATT Messages */
void BLEManagerImpl::HandleAttMsg(qvCHIP_Ble_AttEvt_t * pAttEvt)
{
switch (pAttEvt->hdr.event)
{
case QVCHIP_ATT_MTU_UPDATE_IND: {
break;
}
case QVCHIP_ATTS_HANDLE_VALUE_CNF: {
ChipDeviceEvent event;
event.Type = DeviceEventType::kCHIPoBLEIndicateConfirm;
event.CHIPoBLEIndicateConfirm.ConId = pAttEvt->hdr.param;
PlatformMgr().PostEventOrDie(&event);
break;
}
case QVCHIP_ATTC_FIND_BY_TYPE_VALUE_RSP:
case QVCHIP_ATTC_READ_BY_GROUP_TYPE_RSP:
case QVCHIP_ATTC_READ_BY_TYPE_RSP:
case QVCHIP_ATTC_FIND_INFO_RSP:
break;
case QVCHIP_ATTC_READ_RSP:
break;
case QVCHIP_ATTC_WRITE_RSP:
case QVCHIP_ATTC_WRITE_CMD_RSP:
case QVCHIP_ATTC_PREPARE_WRITE_RSP:
break;
case QVCHIP_ATTC_EXECUTE_WRITE_RSP:
break;
case QVCHIP_ATTC_HANDLE_VALUE_NTF:
case QVCHIP_ATTC_HANDLE_VALUE_IND:
break;
default: {
break;
}
}
}
void BLEManagerImpl::ExternalCbHandler(qvCHIP_Ble_MsgHdr_t * pMsg)
{
if (pMsg != nullptr)
{
PlatformMgr().LockChipStack();
/* Process advertising/scanning and connection-related messages */
if (pMsg->event >= QVCHIP_DM_CBACK_START && pMsg->event <= QVCHIP_DM_CBACK_END)
{
ChipLogProgress(DeviceLayer, "DM event %d: status %d", pMsg->event, pMsg->status);
sInstance.HandleDmMsg((qvCHIP_Ble_DmEvt_t *) pMsg);
}
/* Process attribute-related messages */
else if (pMsg->event >= QVCHIP_ATT_CBACK_START && pMsg->event <= QVCHIP_ATT_CBACK_END)
{
ChipLogProgress(DeviceLayer, "ATT event %d: status %d", pMsg->event, pMsg->status);
sInstance.HandleAttMsg((qvCHIP_Ble_AttEvt_t *) pMsg);
}
else
{
ChipLogProgress(DeviceLayer, "Unknown event %d", pMsg->event);
}
PlatformMgr().UnlockChipStack();
}
}
CHIP_ERROR BLEManagerImpl::SetSubscribed(uint16_t conId)
{
uint16_t freeIndex = kMaxConnections;
for (uint16_t i = 0; i < kMaxConnections; i++)
{
if (mSubscribedConIds[i] == conId)
{
return CHIP_NO_ERROR;
}
else if (mSubscribedConIds[i] == BLE_CONNECTION_UNINITIALIZED && i < freeIndex)
{
freeIndex = i;
}
}
if (freeIndex < kMaxConnections)
{
mSubscribedConIds[freeIndex] = conId;
return CHIP_NO_ERROR;
}
else
{
return CHIP_ERROR_NO_MEMORY;
}
}
bool BLEManagerImpl::UnsetSubscribed(uint16_t conId)
{
for (uint16_t i = 0; i < kMaxConnections; i++)
{
if (mSubscribedConIds[i] == conId)
{
mSubscribedConIds[i] = BLE_CONNECTION_UNINITIALIZED;
return true;
}
}
return false;
}
bool BLEManagerImpl::IsSubscribed(uint16_t conId)
{
if (conId != BLE_CONNECTION_UNINITIALIZED)
{
for (uint16_t i = 0; i < kMaxConnections; i++)
{
if (mSubscribedConIds[i] == conId)
{
return true;
}
}
}
return false;
}
void BLEManagerImpl::_handleTXCharCCCDWrite(qvCHIP_Ble_AttsCccEvt_t * event)
{
sInstance.HandleTXCharCCCDWrite(event);
}
void BLEManagerImpl::BleAdvTimeoutHandler(TimerHandle_t xTimer)
{
if (BLEMgrImpl().mFlags.Has(Flags::kFastAdvertisingEnabled))
{
/* Stop advertising and defer restart for when stop confirmation is received from the stack */
ChipLogDetail(DeviceLayer, "bleAdv Timeout : Start slow advertisement");
sInstance.mFlags.Set(Flags::kRestartAdvertising);
sInstance.StopAdvertising();
}
}
void BLEManagerImpl::CancelBleAdvTimeoutTimer(void)
{
if (xTimerStop(sbleAdvTimeoutTimer, 0) == pdFAIL)
{
ChipLogError(DeviceLayer, "Failed to stop BledAdv timeout timer");
}
}
void BLEManagerImpl::StartBleAdvTimeoutTimer(uint32_t aTimeoutInMs)
{
if (xTimerIsTimerActive(sbleAdvTimeoutTimer))
{
CancelBleAdvTimeoutTimer();
}
// timer is not active, change its period to required value (== restart).
// FreeRTOS- Block for a maximum of 100 ticks if the change period command
// cannot immediately be sent to the timer command queue.
if (xTimerChangePeriod(sbleAdvTimeoutTimer, pdMS_TO_TICKS(aTimeoutInMs), 100) != pdPASS)
{
ChipLogError(DeviceLayer, "Failed to start BledAdv timeout timer");
}
}
#if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING
CHIP_ERROR BLEManagerImpl::PrepareAdditionalData()
{
CHIP_ERROR err = CHIP_NO_ERROR;
BitFlags<AdditionalDataFields> additionalDataFields;
AdditionalDataPayloadGeneratorParams additionalDataPayloadParams;
PacketBufferHandle additionalDataHandle;
#if CHIP_ENABLE_ROTATING_DEVICE_ID
uint8_t rotatingDeviceIdUniqueId[ConfigurationManager::kRotatingDeviceIDUniqueIDLength] = {};
MutableByteSpan rotatingDeviceIdUniqueIdSpan(rotatingDeviceIdUniqueId);
err = GetDeviceInstanceInfoProvider()->GetRotatingDeviceIdUniqueId(rotatingDeviceIdUniqueIdSpan);
SuccessOrExit(err);
err = ConfigurationMgr().GetLifetimeCounter(additionalDataPayloadParams.rotatingDeviceIdLifetimeCounter);
SuccessOrExit(err);
additionalDataPayloadParams.rotatingDeviceIdUniqueId = rotatingDeviceIdUniqueIdSpan;
additionalDataFields.Set(AdditionalDataFields::RotatingDeviceId);
#endif /* CHIP_ENABLE_ROTATING_DEVICE_ID */
err = AdditionalDataPayloadGenerator().generateAdditionalDataPayload(additionalDataPayloadParams, additionalDataHandle,
additionalDataFields);
SuccessOrExit(err);
if (!additionalDataHandle.IsNull())
{
err = MapBLEError(qvCHIP_BleWriteC3Attr(additionalDataHandle->DataLength(), additionalDataHandle->Start()));
}
exit:
if (err != CHIP_NO_ERROR)
{
ChipLogError(DeviceLayer, "Failed to prepare Additional Data");
}
return err;
}
#endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */
} // namespace Internal
} // namespace DeviceLayer
} // namespace chip
#endif // CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE