| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * Copyright (c) 2018 Google LLC. |
| * Copyright (c) 2013-2018 Nest Labs, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * This file implements Inet::UDPEndPoint using sockets. |
| */ |
| |
| // Required to properly support underlying RFC3542-related fields to IPV6_PKTINFO |
| // on Darwin. |
| #define __APPLE_USE_RFC_3542 |
| #include <inet/UDPEndPointImplSockets.h> |
| |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/SafeInt.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| |
| #if HAVE_SYS_SOCKET_H |
| #include <sys/socket.h> |
| #endif // HAVE_SYS_SOCKET_H |
| |
| #include <cerrno> |
| #include <net/if.h> |
| #include <netinet/in.h> |
| #include <sys/ioctl.h> |
| #include <unistd.h> |
| #include <utility> |
| |
| // SOCK_CLOEXEC not defined on all platforms, e.g. iOS/macOS: |
| #ifndef SOCK_CLOEXEC |
| #define SOCK_CLOEXEC 0 |
| #endif |
| |
| #if CHIP_SYSTEM_CONFIG_USE_ZEPHYR_SOCKET_EXTENSIONS |
| #include "ZephyrSocket.h" |
| #endif // CHIP_SYSTEM_CONFIG_USE_ZEPHYR_SOCKET_EXTENSIONS |
| |
| /* |
| * Some systems define both IPV6_{ADD,DROP}_MEMBERSHIP and |
| * IPV6_{JOIN,LEAVE}_GROUP while others only define |
| * IPV6_{JOIN,LEAVE}_GROUP. Prefer the "_MEMBERSHIP" flavor for |
| * parallelism with IPv4 and create the alias to the availabile |
| * definitions. |
| */ |
| #if defined(IPV6_ADD_MEMBERSHIP) |
| #define INET_IPV6_ADD_MEMBERSHIP IPV6_ADD_MEMBERSHIP |
| #elif defined(IPV6_JOIN_GROUP) |
| #define INET_IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP |
| #elif !__ZEPHYR__ |
| #error \ |
| "Neither IPV6_ADD_MEMBERSHIP nor IPV6_JOIN_GROUP are defined which are required for generalized IPv6 multicast group support." |
| #endif // IPV6_ADD_MEMBERSHIP |
| |
| #if defined(IPV6_DROP_MEMBERSHIP) |
| #define INET_IPV6_DROP_MEMBERSHIP IPV6_DROP_MEMBERSHIP |
| #elif defined(IPV6_LEAVE_GROUP) |
| #define INET_IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP |
| #elif !__ZEPHYR__ |
| #error \ |
| "Neither IPV6_DROP_MEMBERSHIP nor IPV6_LEAVE_GROUP are defined which are required for generalized IPv6 multicast group support." |
| #endif // IPV6_DROP_MEMBERSHIP |
| |
| namespace chip { |
| namespace Inet { |
| |
| namespace { |
| |
| CHIP_ERROR IPv6Bind(int socket, const IPAddress & address, uint16_t port, InterfaceId interface) |
| { |
| struct sockaddr_in6 sa; |
| memset(&sa, 0, sizeof(sa)); |
| sa.sin6_family = AF_INET6; |
| sa.sin6_port = htons(port); |
| sa.sin6_addr = address.ToIPv6(); |
| InterfaceId::PlatformType interfaceId = interface.GetPlatformInterface(); |
| if (!CanCastTo<decltype(sa.sin6_scope_id)>(interfaceId)) |
| { |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| sa.sin6_scope_id = static_cast<decltype(sa.sin6_scope_id)>(interfaceId); |
| |
| CHIP_ERROR status = CHIP_NO_ERROR; |
| if (bind(socket, reinterpret_cast<const sockaddr *>(&sa), static_cast<unsigned>(sizeof(sa))) != 0) |
| { |
| status = CHIP_ERROR_POSIX(errno); |
| } |
| else |
| { |
| #ifdef IPV6_MULTICAST_IF |
| // Instruct the kernel that any messages to multicast destinations should be |
| // sent down the interface specified by the caller. |
| setsockopt(socket, IPPROTO_IPV6, IPV6_MULTICAST_IF, &interfaceId, sizeof(interfaceId)); |
| #endif // defined(IPV6_MULTICAST_IF) |
| } |
| |
| #ifdef IPV6_MULTICAST_HOPS |
| // Instruct the kernel that any messages to multicast destinations should be |
| // set with the configured hop limit value. |
| int hops = INET_CONFIG_IP_MULTICAST_HOP_LIMIT; |
| setsockopt(socket, IPPROTO_IPV6, IPV6_MULTICAST_HOPS, &hops, sizeof(hops)); |
| #endif // defined(IPV6_MULTICAST_HOPS) |
| |
| return status; |
| } |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| CHIP_ERROR IPv4Bind(int socket, const IPAddress & address, uint16_t port) |
| { |
| struct sockaddr_in sa; |
| memset(&sa, 0, sizeof(sa)); |
| sa.sin_family = AF_INET; |
| sa.sin_port = htons(port); |
| sa.sin_addr = address.ToIPv4(); |
| |
| CHIP_ERROR status = CHIP_NO_ERROR; |
| if (bind(socket, reinterpret_cast<const sockaddr *>(&sa), static_cast<unsigned>(sizeof(sa))) != 0) |
| { |
| status = CHIP_ERROR_POSIX(errno); |
| } |
| else |
| { |
| // Allow socket transmitting broadcast packets. |
| constexpr int enable = 1; |
| setsockopt(socket, SOL_SOCKET, SO_BROADCAST, &enable, sizeof(enable)); |
| |
| #ifdef IP_MULTICAST_IF |
| // Instruct the kernel that any messages to multicast destinations should be |
| // sent down the interface to which the specified IPv4 address is bound. |
| setsockopt(socket, IPPROTO_IP, IP_MULTICAST_IF, &sa, sizeof(sa)); |
| #endif // defined(IP_MULTICAST_IF) |
| } |
| |
| #ifdef IP_MULTICAST_TTL |
| // Instruct the kernel that any messages to multicast destinations should be |
| // set with the configured hop limit value. |
| constexpr int ttl = INET_CONFIG_IP_MULTICAST_HOP_LIMIT; |
| setsockopt(socket, IPPROTO_IP, IP_MULTICAST_TTL, &ttl, sizeof(ttl)); |
| #endif // defined(IP_MULTICAST_TTL) |
| |
| return status; |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| } // anonymous namespace |
| |
| #if CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API |
| UDPEndPointImplSockets::MulticastGroupHandler UDPEndPointImplSockets::sJoinMulticastGroupHandler; |
| UDPEndPointImplSockets::MulticastGroupHandler UDPEndPointImplSockets::sLeaveMulticastGroupHandler; |
| #endif // CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API |
| |
| CHIP_ERROR UDPEndPointImplSockets::BindImpl(IPAddressType addressType, const IPAddress & addr, uint16_t port, InterfaceId interface) |
| { |
| // Make sure we have the appropriate type of socket. |
| ReturnErrorOnFailure(GetSocket(addressType)); |
| |
| if (addressType == IPAddressType::kIPv6) |
| { |
| ReturnErrorOnFailure(IPv6Bind(mSocket, addr, port, interface)); |
| } |
| #if INET_CONFIG_ENABLE_IPV4 |
| else if (addressType == IPAddressType::kIPv4) |
| { |
| ReturnErrorOnFailure(IPv4Bind(mSocket, addr, port)); |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| else |
| { |
| return INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| |
| mBoundPort = port; |
| mBoundIntfId = interface; |
| |
| // If an ephemeral port was requested, retrieve the actual bound port. |
| if (port == 0) |
| { |
| SockAddr boundAddr; |
| socklen_t boundAddrLen = sizeof(boundAddr); |
| |
| if (getsockname(mSocket, &boundAddr.any, &boundAddrLen) == 0) |
| { |
| if (boundAddr.any.sa_family == AF_INET) |
| { |
| mBoundPort = ntohs(boundAddr.in.sin_port); |
| } |
| else if (boundAddr.any.sa_family == AF_INET6) |
| { |
| mBoundPort = ntohs(boundAddr.in6.sin6_port); |
| } |
| } |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR UDPEndPointImplSockets::BindInterfaceImpl(IPAddressType addressType, InterfaceId interfaceId) |
| { |
| // Make sure we have the appropriate type of socket. |
| ReturnErrorOnFailure(GetSocket(addressType)); |
| |
| #if HAVE_SO_BINDTODEVICE |
| CHIP_ERROR status = CHIP_NO_ERROR; |
| |
| if (interfaceId.IsPresent()) |
| { |
| // Start filtering on the passed interface. |
| char interfaceName[IF_NAMESIZE]; |
| if (if_indextoname(interfaceId.GetPlatformInterface(), interfaceName) == nullptr) |
| { |
| status = CHIP_ERROR_POSIX(errno); |
| } |
| else if (setsockopt(mSocket, SOL_SOCKET, SO_BINDTODEVICE, interfaceName, socklen_t(strlen(interfaceName))) == -1) |
| { |
| status = CHIP_ERROR_POSIX(errno); |
| } |
| } |
| else |
| { |
| // Stop interface-based filtering. |
| if (setsockopt(mSocket, SOL_SOCKET, SO_BINDTODEVICE, "", 0) == -1) |
| { |
| status = CHIP_ERROR_POSIX(errno); |
| } |
| } |
| |
| if (status == CHIP_NO_ERROR) |
| { |
| mBoundIntfId = interfaceId; |
| } |
| |
| return status; |
| #else // !HAVE_SO_BINDTODEVICE |
| return CHIP_ERROR_NOT_IMPLEMENTED; |
| #endif // HAVE_SO_BINDTODEVICE |
| } |
| |
| InterfaceId UDPEndPointImplSockets::GetBoundInterface() const |
| { |
| return mBoundIntfId; |
| } |
| |
| uint16_t UDPEndPointImplSockets::GetBoundPort() const |
| { |
| return mBoundPort; |
| } |
| |
| CHIP_ERROR UDPEndPointImplSockets::ListenImpl() |
| { |
| // Wait for ability to read on this endpoint. |
| auto * layer = static_cast<System::LayerSockets *>(&GetSystemLayer()); |
| ReturnErrorOnFailure(layer->SetCallback(mWatch, HandlePendingIO, reinterpret_cast<intptr_t>(this))); |
| return layer->RequestCallbackOnPendingRead(mWatch); |
| } |
| |
| CHIP_ERROR UDPEndPointImplSockets::SendMsgImpl(const IPPacketInfo * aPktInfo, System::PacketBufferHandle && msg) |
| { |
| // Make sure we have the appropriate type of socket based on the |
| // destination address. |
| ReturnErrorOnFailure(GetSocket(aPktInfo->DestAddress.Type())); |
| |
| // Ensure the destination address type is compatible with the endpoint address type. |
| VerifyOrReturnError(mAddrType == aPktInfo->DestAddress.Type(), CHIP_ERROR_INVALID_ARGUMENT); |
| |
| // For now the entire message must fit within a single buffer. |
| VerifyOrReturnError(!msg->HasChainedBuffer(), CHIP_ERROR_MESSAGE_TOO_LONG); |
| |
| struct iovec msgIOV; |
| msgIOV.iov_base = msg->Start(); |
| msgIOV.iov_len = msg->DataLength(); |
| |
| #if defined(IP_PKTINFO) || defined(IPV6_PKTINFO) |
| uint8_t controlData[256]; |
| memset(controlData, 0, sizeof(controlData)); |
| #endif // defined(IP_PKTINFO) || defined(IPV6_PKTINFO) |
| |
| struct msghdr msgHeader; |
| memset(&msgHeader, 0, sizeof(msgHeader)); |
| msgHeader.msg_iov = &msgIOV; |
| msgHeader.msg_iovlen = 1; |
| |
| // Construct a sockaddr_in/sockaddr_in6 structure containing the destination information. |
| SockAddr peerSockAddr; |
| memset(&peerSockAddr, 0, sizeof(peerSockAddr)); |
| msgHeader.msg_name = &peerSockAddr; |
| if (mAddrType == IPAddressType::kIPv6) |
| { |
| peerSockAddr.in6.sin6_family = AF_INET6; |
| peerSockAddr.in6.sin6_port = htons(aPktInfo->DestPort); |
| peerSockAddr.in6.sin6_addr = aPktInfo->DestAddress.ToIPv6(); |
| InterfaceId::PlatformType intfId = aPktInfo->Interface.GetPlatformInterface(); |
| VerifyOrReturnError(CanCastTo<decltype(peerSockAddr.in6.sin6_scope_id)>(intfId), CHIP_ERROR_INCORRECT_STATE); |
| peerSockAddr.in6.sin6_scope_id = static_cast<decltype(peerSockAddr.in6.sin6_scope_id)>(intfId); |
| msgHeader.msg_namelen = sizeof(sockaddr_in6); |
| } |
| #if INET_CONFIG_ENABLE_IPV4 |
| else |
| { |
| peerSockAddr.in.sin_family = AF_INET; |
| peerSockAddr.in.sin_port = htons(aPktInfo->DestPort); |
| peerSockAddr.in.sin_addr = aPktInfo->DestAddress.ToIPv4(); |
| msgHeader.msg_namelen = sizeof(sockaddr_in); |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| // If the endpoint has been bound to a particular interface, |
| // and the caller didn't supply a specific interface to send |
| // on, use the bound interface. This appears to be necessary |
| // for messages to multicast addresses, which under Linux |
| // don't seem to get sent out the correct interface, despite |
| // the socket being bound. |
| InterfaceId intf = aPktInfo->Interface; |
| if (!intf.IsPresent()) |
| { |
| intf = mBoundIntfId; |
| } |
| |
| // If the packet should be sent over a specific interface, or with a specific source |
| // address, construct an IP_PKTINFO/IPV6_PKTINFO "control message" to that effect |
| // add add it to the message header. If the local OS doesn't support IP_PKTINFO/IPV6_PKTINFO |
| // fail with an error. |
| if (intf.IsPresent() || aPktInfo->SrcAddress.Type() != IPAddressType::kAny) |
| { |
| #if defined(IP_PKTINFO) || defined(IPV6_PKTINFO) |
| msgHeader.msg_control = controlData; |
| msgHeader.msg_controllen = sizeof(controlData); |
| |
| struct cmsghdr * controlHdr = CMSG_FIRSTHDR(&msgHeader); |
| InterfaceId::PlatformType intfId = intf.GetPlatformInterface(); |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| |
| if (mAddrType == IPAddressType::kIPv4) |
| { |
| #if defined(IP_PKTINFO) |
| controlHdr->cmsg_level = IPPROTO_IP; |
| controlHdr->cmsg_type = IP_PKTINFO; |
| controlHdr->cmsg_len = CMSG_LEN(sizeof(in_pktinfo)); |
| |
| auto * pktInfo = reinterpret_cast<struct in_pktinfo *> CMSG_DATA(controlHdr); |
| if (!CanCastTo<decltype(pktInfo->ipi_ifindex)>(intfId)) |
| { |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| } |
| |
| pktInfo->ipi_ifindex = static_cast<decltype(pktInfo->ipi_ifindex)>(intfId); |
| pktInfo->ipi_spec_dst = aPktInfo->SrcAddress.ToIPv4(); |
| |
| msgHeader.msg_controllen = CMSG_SPACE(sizeof(in_pktinfo)); |
| #else // !defined(IP_PKTINFO) |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| #endif // !defined(IP_PKTINFO) |
| } |
| |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| if (mAddrType == IPAddressType::kIPv6) |
| { |
| #if defined(IPV6_PKTINFO) |
| controlHdr->cmsg_level = IPPROTO_IPV6; |
| controlHdr->cmsg_type = IPV6_PKTINFO; |
| controlHdr->cmsg_len = CMSG_LEN(sizeof(in6_pktinfo)); |
| |
| auto * pktInfo = reinterpret_cast<struct in6_pktinfo *> CMSG_DATA(controlHdr); |
| if (!CanCastTo<decltype(pktInfo->ipi6_ifindex)>(intfId)) |
| { |
| return CHIP_ERROR_UNEXPECTED_EVENT; |
| } |
| pktInfo->ipi6_ifindex = static_cast<decltype(pktInfo->ipi6_ifindex)>(intfId); |
| pktInfo->ipi6_addr = aPktInfo->SrcAddress.ToIPv6(); |
| |
| msgHeader.msg_controllen = CMSG_SPACE(sizeof(in6_pktinfo)); |
| #else // !defined(IPV6_PKTINFO) |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| #endif // !defined(IPV6_PKTINFO) |
| } |
| |
| #else // !(defined(IP_PKTINFO) && defined(IPV6_PKTINFO)) |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| #endif // !(defined(IP_PKTINFO) && defined(IPV6_PKTINFO)) |
| } |
| |
| // Send IP packet. |
| const ssize_t lenSent = sendmsg(mSocket, &msgHeader, 0); |
| if (lenSent == -1) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| if (lenSent != msg->DataLength()) |
| { |
| return CHIP_ERROR_OUTBOUND_MESSAGE_TOO_BIG; |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| void UDPEndPointImplSockets::CloseImpl() |
| { |
| if (mSocket != kInvalidSocketFd) |
| { |
| static_cast<System::LayerSockets *>(&GetSystemLayer())->StopWatchingSocket(&mWatch); |
| close(mSocket); |
| mSocket = kInvalidSocketFd; |
| } |
| } |
| |
| void UDPEndPointImplSockets::Free() |
| { |
| Close(); |
| Release(); |
| } |
| |
| CHIP_ERROR UDPEndPointImplSockets::GetSocket(IPAddressType addressType) |
| { |
| if (mSocket == kInvalidSocketFd) |
| { |
| constexpr int type = (SOCK_DGRAM | SOCK_CLOEXEC); |
| constexpr int protocol = 0; |
| |
| int family = PF_UNSPEC; |
| |
| switch (addressType) |
| { |
| case IPAddressType::kIPv6: |
| family = PF_INET6; |
| break; |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| case IPAddressType::kIPv4: |
| family = PF_INET; |
| break; |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| default: |
| return INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| |
| mSocket = ::socket(family, type, protocol); |
| if (mSocket == -1) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| ReturnErrorOnFailure(static_cast<System::LayerSockets *>(&GetSystemLayer())->StartWatchingSocket(mSocket, &mWatch)); |
| |
| mAddrType = addressType; |
| |
| // NOTE WELL: the errors returned by setsockopt() here are not |
| // returned as Inet layer CHIP_ERROR_POSIX(errno) |
| // codes because they are normally expected to fail on some |
| // platforms where the socket option code is defined in the |
| // header files but not [yet] implemented. Certainly, there is |
| // room to improve this by connecting the build configuration |
| // logic up to check for implementations of these options and |
| // to provide appropriate HAVE_xxxxx definitions accordingly. |
| |
| constexpr int one = 1; |
| int res = setsockopt(mSocket, SOL_SOCKET, SO_REUSEADDR, &one, sizeof(one)); |
| static_cast<void>(res); |
| |
| #ifdef SO_REUSEPORT |
| res = setsockopt(mSocket, SOL_SOCKET, SO_REUSEPORT, &one, sizeof(one)); |
| if (res != 0) |
| { |
| ChipLogError(Inet, "SO_REUSEPORT failed: %d", errno); |
| } |
| #endif // defined(SO_REUSEPORT) |
| |
| // If creating an IPv6 socket, tell the kernel that it will be |
| // IPv6 only. This makes it posible to bind two sockets to |
| // the same port, one for IPv4 and one for IPv6. |
| |
| #ifdef IPV6_V6ONLY |
| if (addressType == IPAddressType::kIPv6) |
| { |
| res = setsockopt(mSocket, IPPROTO_IPV6, IPV6_V6ONLY, &one, sizeof(one)); |
| if (res != 0) |
| { |
| ChipLogError(Inet, "IPV6_V6ONLY failed: %d", errno); |
| } |
| } |
| #endif // defined(IPV6_V6ONLY) |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| #ifdef IP_PKTINFO |
| if (addressType == IPAddressType::kIPv4) |
| { |
| res = setsockopt(mSocket, IPPROTO_IP, IP_PKTINFO, &one, sizeof(one)); |
| if (res != 0) |
| { |
| ChipLogError(Inet, "IP_PKTINFO failed: %d", errno); |
| } |
| } |
| #endif // defined(IP_PKTINFO) |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| #ifdef IPV6_RECVPKTINFO |
| if (addressType == IPAddressType::kIPv6) |
| { |
| res = setsockopt(mSocket, IPPROTO_IPV6, IPV6_RECVPKTINFO, &one, sizeof(one)); |
| if (res != 0) |
| { |
| ChipLogError(Inet, "IPV6_PKTINFO failed: %d", errno); |
| } |
| } |
| #endif // defined(IPV6_RECVPKTINFO) |
| |
| // On systems that support it, disable the delivery of SIGPIPE |
| // signals when writing to a closed socket. This is mostly |
| // needed on iOS which has the peculiar habit of sending |
| // SIGPIPEs on unconnected UDP sockets. |
| #ifdef SO_NOSIGPIPE |
| { |
| res = setsockopt(mSocket, SOL_SOCKET, SO_NOSIGPIPE, &one, sizeof(one)); |
| if (res != 0) |
| { |
| ChipLogError(Inet, "SO_NOSIGPIPE failed: %d", errno); |
| } |
| } |
| #endif // defined(SO_NOSIGPIPE) |
| } |
| else if (mAddrType != addressType) |
| { |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| // static |
| void UDPEndPointImplSockets::HandlePendingIO(System::SocketEvents events, intptr_t data) |
| { |
| reinterpret_cast<UDPEndPointImplSockets *>(data)->HandlePendingIO(events); |
| } |
| |
| void UDPEndPointImplSockets::HandlePendingIO(System::SocketEvents events) |
| { |
| if (mState != State::kListening || OnMessageReceived == nullptr || !events.Has(System::SocketEventFlags::kRead)) |
| { |
| return; |
| } |
| |
| CHIP_ERROR lStatus = CHIP_NO_ERROR; |
| IPPacketInfo lPacketInfo; |
| System::PacketBufferHandle lBuffer; |
| |
| lPacketInfo.Clear(); |
| lPacketInfo.DestPort = mBoundPort; |
| |
| lBuffer = System::PacketBufferHandle::New(System::PacketBuffer::kMaxSizeWithoutReserve, 0); |
| |
| if (!lBuffer.IsNull()) |
| { |
| struct iovec msgIOV; |
| SockAddr lPeerSockAddr; |
| uint8_t controlData[256]; |
| struct msghdr msgHeader; |
| |
| msgIOV.iov_base = lBuffer->Start(); |
| msgIOV.iov_len = lBuffer->AvailableDataLength(); |
| |
| memset(&lPeerSockAddr, 0, sizeof(lPeerSockAddr)); |
| |
| memset(&msgHeader, 0, sizeof(msgHeader)); |
| |
| msgHeader.msg_name = &lPeerSockAddr; |
| msgHeader.msg_namelen = sizeof(lPeerSockAddr); |
| msgHeader.msg_iov = &msgIOV; |
| msgHeader.msg_iovlen = 1; |
| msgHeader.msg_control = controlData; |
| msgHeader.msg_controllen = sizeof(controlData); |
| |
| ssize_t rcvLen = recvmsg(mSocket, &msgHeader, MSG_DONTWAIT); |
| |
| if (rcvLen < 0) |
| { |
| lStatus = CHIP_ERROR_POSIX(errno); |
| } |
| else if (rcvLen > lBuffer->AvailableDataLength()) |
| { |
| lStatus = CHIP_ERROR_INBOUND_MESSAGE_TOO_BIG; |
| } |
| else |
| { |
| lBuffer->SetDataLength(static_cast<uint16_t>(rcvLen)); |
| |
| if (lPeerSockAddr.any.sa_family == AF_INET6) |
| { |
| lPacketInfo.SrcAddress = IPAddress(lPeerSockAddr.in6.sin6_addr); |
| lPacketInfo.SrcPort = ntohs(lPeerSockAddr.in6.sin6_port); |
| } |
| #if INET_CONFIG_ENABLE_IPV4 |
| else if (lPeerSockAddr.any.sa_family == AF_INET) |
| { |
| lPacketInfo.SrcAddress = IPAddress(lPeerSockAddr.in.sin_addr); |
| lPacketInfo.SrcPort = ntohs(lPeerSockAddr.in.sin_port); |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| else |
| { |
| lStatus = CHIP_ERROR_INCORRECT_STATE; |
| } |
| } |
| |
| if (lStatus == CHIP_NO_ERROR) |
| { |
| for (struct cmsghdr * controlHdr = CMSG_FIRSTHDR(&msgHeader); controlHdr != nullptr; |
| controlHdr = CMSG_NXTHDR(&msgHeader, controlHdr)) |
| { |
| #if INET_CONFIG_ENABLE_IPV4 |
| #ifdef IP_PKTINFO |
| if (controlHdr->cmsg_level == IPPROTO_IP && controlHdr->cmsg_type == IP_PKTINFO) |
| { |
| auto * inPktInfo = reinterpret_cast<struct in_pktinfo *> CMSG_DATA(controlHdr); |
| if (!CanCastTo<InterfaceId::PlatformType>(inPktInfo->ipi_ifindex)) |
| { |
| lStatus = CHIP_ERROR_INCORRECT_STATE; |
| break; |
| } |
| lPacketInfo.Interface = InterfaceId(static_cast<InterfaceId::PlatformType>(inPktInfo->ipi_ifindex)); |
| lPacketInfo.DestAddress = IPAddress(inPktInfo->ipi_addr); |
| continue; |
| } |
| #endif // defined(IP_PKTINFO) |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| #ifdef IPV6_PKTINFO |
| if (controlHdr->cmsg_level == IPPROTO_IPV6 && controlHdr->cmsg_type == IPV6_PKTINFO) |
| { |
| auto * in6PktInfo = reinterpret_cast<struct in6_pktinfo *> CMSG_DATA(controlHdr); |
| if (!CanCastTo<InterfaceId::PlatformType>(in6PktInfo->ipi6_ifindex)) |
| { |
| lStatus = CHIP_ERROR_INCORRECT_STATE; |
| break; |
| } |
| lPacketInfo.Interface = InterfaceId(static_cast<InterfaceId::PlatformType>(in6PktInfo->ipi6_ifindex)); |
| lPacketInfo.DestAddress = IPAddress(in6PktInfo->ipi6_addr); |
| continue; |
| } |
| #endif // defined(IPV6_PKTINFO) |
| } |
| } |
| } |
| else |
| { |
| lStatus = CHIP_ERROR_NO_MEMORY; |
| } |
| |
| if (lStatus == CHIP_NO_ERROR) |
| { |
| lBuffer.RightSize(); |
| OnMessageReceived(this, std::move(lBuffer), &lPacketInfo); |
| } |
| else |
| { |
| if (OnReceiveError != nullptr && lStatus != CHIP_ERROR_POSIX(EAGAIN)) |
| { |
| OnReceiveError(this, lStatus, nullptr); |
| } |
| } |
| } |
| |
| #if IP_MULTICAST_LOOP || IPV6_MULTICAST_LOOP |
| static CHIP_ERROR SocketsSetMulticastLoopback(int aSocket, bool aLoopback, int aProtocol, int aOption) |
| { |
| const unsigned int lValue = static_cast<unsigned int>(aLoopback); |
| if (setsockopt(aSocket, aProtocol, aOption, &lValue, sizeof(lValue)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| #endif // IP_MULTICAST_LOOP || IPV6_MULTICAST_LOOP |
| |
| static CHIP_ERROR SocketsSetMulticastLoopback(int aSocket, IPVersion aIPVersion, bool aLoopback) |
| { |
| #ifdef IPV6_MULTICAST_LOOP |
| CHIP_ERROR lRetval; |
| |
| switch (aIPVersion) |
| { |
| |
| case kIPVersion_6: |
| lRetval = SocketsSetMulticastLoopback(aSocket, aLoopback, IPPROTO_IPV6, IPV6_MULTICAST_LOOP); |
| break; |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| case kIPVersion_4: |
| lRetval = SocketsSetMulticastLoopback(aSocket, aLoopback, IPPROTO_IP, IP_MULTICAST_LOOP); |
| break; |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| default: |
| lRetval = INET_ERROR_WRONG_ADDRESS_TYPE; |
| break; |
| } |
| |
| return (lRetval); |
| #else // IPV6_MULTICAST_LOOP |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| #endif // IPV6_MULTICAST_LOOP |
| } |
| |
| CHIP_ERROR UDPEndPointImplSockets::SetMulticastLoopback(IPVersion aIPVersion, bool aLoopback) |
| { |
| CHIP_ERROR lRetval = CHIP_ERROR_NOT_IMPLEMENTED; |
| |
| lRetval = SocketsSetMulticastLoopback(mSocket, aIPVersion, aLoopback); |
| SuccessOrExit(lRetval); |
| |
| exit: |
| return (lRetval); |
| } |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| |
| CHIP_ERROR UDPEndPointImplSockets::IPv4JoinLeaveMulticastGroupImpl(InterfaceId aInterfaceId, const IPAddress & aAddress, bool join) |
| { |
| IPAddress lInterfaceAddress; |
| bool lInterfaceAddressFound = false; |
| |
| for (InterfaceAddressIterator lAddressIterator; lAddressIterator.HasCurrent(); lAddressIterator.Next()) |
| { |
| IPAddress lCurrentAddress; |
| if ((lAddressIterator.GetInterfaceId() == aInterfaceId) && (lAddressIterator.GetAddress(lCurrentAddress) == CHIP_NO_ERROR)) |
| { |
| if (lCurrentAddress.IsIPv4()) |
| { |
| lInterfaceAddressFound = true; |
| lInterfaceAddress = lCurrentAddress; |
| break; |
| } |
| } |
| } |
| VerifyOrReturnError(lInterfaceAddressFound, INET_ERROR_ADDRESS_NOT_FOUND); |
| |
| struct ip_mreq lMulticastRequest; |
| memset(&lMulticastRequest, 0, sizeof(lMulticastRequest)); |
| lMulticastRequest.imr_interface = lInterfaceAddress.ToIPv4(); |
| lMulticastRequest.imr_multiaddr = aAddress.ToIPv4(); |
| |
| const int command = join ? IP_ADD_MEMBERSHIP : IP_DROP_MEMBERSHIP; |
| if (setsockopt(mSocket, IPPROTO_IP, command, &lMulticastRequest, sizeof(lMulticastRequest)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| CHIP_ERROR UDPEndPointImplSockets::IPv6JoinLeaveMulticastGroupImpl(InterfaceId aInterfaceId, const IPAddress & aAddress, bool join) |
| { |
| #if CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API |
| MulticastGroupHandler handler = join ? sJoinMulticastGroupHandler : sLeaveMulticastGroupHandler; |
| if (handler != nullptr) |
| { |
| return handler(aInterfaceId, aAddress); |
| } |
| #endif // CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API |
| |
| #ifdef IPV6_MULTICAST_IMPLEMENTED |
| const InterfaceId::PlatformType lIfIndex = aInterfaceId.GetPlatformInterface(); |
| |
| struct ipv6_mreq lMulticastRequest; |
| memset(&lMulticastRequest, 0, sizeof(lMulticastRequest)); |
| VerifyOrReturnError(CanCastTo<decltype(lMulticastRequest.ipv6mr_interface)>(lIfIndex), CHIP_ERROR_UNEXPECTED_EVENT); |
| |
| lMulticastRequest.ipv6mr_interface = static_cast<decltype(lMulticastRequest.ipv6mr_interface)>(lIfIndex); |
| lMulticastRequest.ipv6mr_multiaddr = aAddress.ToIPv6(); |
| |
| const int command = join ? INET_IPV6_ADD_MEMBERSHIP : INET_IPV6_DROP_MEMBERSHIP; |
| if (setsockopt(mSocket, IPPROTO_IPV6, command, &lMulticastRequest, sizeof(lMulticastRequest)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| return CHIP_NO_ERROR; |
| #else |
| return CHIP_ERROR_NOT_IMPLEMENTED; |
| #endif |
| } |
| |
| } // namespace Inet |
| } // namespace chip |
