| # |
| # Copyright (c) 2021 Project CHIP Authors |
| # All rights reserved. |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| import asyncio |
| import copy |
| import ctypes |
| import faulthandler |
| import inspect |
| import logging |
| import os |
| import secrets |
| import sys |
| import threading |
| import time |
| from dataclasses import dataclass |
| from inspect import Attribute |
| from typing import Any |
| |
| import chip.CertificateAuthority |
| import chip.clusters as Clusters |
| import chip.clusters.Attribute as Attribute |
| import chip.discovery |
| import chip.FabricAdmin |
| import chip.interaction_model as IM |
| import chip.native |
| from chip import ChipDeviceCtrl |
| from chip.ChipStack import * |
| from chip.utils import CommissioningBuildingBlocks |
| |
| logger = logging.getLogger('PythonMatterControllerTEST') |
| logger.setLevel(logging.INFO) |
| |
| sh = logging.StreamHandler() |
| sh.setFormatter( |
| logging.Formatter( |
| '%(asctime)s [%(name)s] %(levelname)s %(message)s')) |
| sh.setStream(sys.stdout) |
| logger.addHandler(sh) |
| |
| |
| def TestFail(message, doCrash=False): |
| logger.fatal("Testfail: {}".format(message)) |
| |
| if (doCrash): |
| logger.fatal("--------------------------------") |
| logger.fatal("Backtrace of all Python threads:") |
| logger.fatal("--------------------------------") |
| |
| # |
| # Let's dump the Python backtrace for all threads, since the backtrace we'll |
| # get from gdb (if one is attached) won't give us good Python symbol information. |
| # |
| faulthandler.dump_traceback() |
| |
| # |
| # Cause a crash to happen so that we can actually get a meaningful |
| # backtrace when run through GDB. |
| # |
| chip.native.GetLibraryHandle().pychip_CauseCrash() |
| else: |
| os._exit(1) |
| |
| |
| def FailIfNot(cond, message): |
| if not cond: |
| TestFail(message) |
| |
| |
| _configurable_tests = set() |
| _configurable_test_sets = set() |
| _enabled_tests = [] |
| _disabled_tests = [] |
| |
| |
| def SetTestSet(enabled_tests, disabled_tests): |
| global _enabled_tests, _disabled_tests |
| _enabled_tests = enabled_tests[:] |
| _disabled_tests = disabled_tests[:] |
| |
| |
| def TestIsEnabled(test_name: str): |
| enabled_len = -1 |
| disabled_len = -1 |
| if 'all' in _enabled_tests: |
| enabled_len = 0 |
| if 'all' in _disabled_tests: |
| disabled_len = 0 |
| |
| for test_item in _enabled_tests: |
| if test_name.startswith(test_item) and (len(test_item) > enabled_len): |
| enabled_len = len(test_item) |
| |
| for test_item in _disabled_tests: |
| if test_name.startswith(test_item) and (len(test_item) > disabled_len): |
| disabled_len = len(test_item) |
| |
| return enabled_len > disabled_len |
| |
| |
| def test_set(cls): |
| _configurable_test_sets.add(cls.__qualname__) |
| return cls |
| |
| |
| def test_case(func): |
| test_name = func.__qualname__ |
| _configurable_tests.add(test_name) |
| |
| def CheckEnableBeforeRun(*args, **kwargs): |
| if TestIsEnabled(test_name=test_name): |
| return func(*args, **kwargs) |
| elif inspect.iscoroutinefunction(func): |
| # noop, so users can use await as usual |
| return asyncio.sleep(0) |
| return CheckEnableBeforeRun |
| |
| |
| def configurable_tests(): |
| res = [v for v in _configurable_test_sets] |
| res.sort() |
| return res |
| |
| |
| def configurable_test_cases(): |
| res = [v for v in _configurable_tests] |
| res.sort() |
| return res |
| |
| |
| class TestTimeout(threading.Thread): |
| def __init__(self, timeout: int): |
| threading.Thread.__init__(self) |
| self._timeout = timeout |
| self._should_stop = False |
| self._cv = threading.Condition() |
| |
| def stop(self): |
| with self._cv: |
| self._should_stop = True |
| self._cv.notify_all() |
| self.join() |
| |
| def run(self): |
| stop_time = time.time() + self._timeout |
| logger.info("Test timeout set to {} seconds".format(self._timeout)) |
| with self._cv: |
| wait_time = stop_time - time.time() |
| while wait_time > 0 and not self._should_stop: |
| self._cv.wait(wait_time) |
| wait_time = stop_time - time.time() |
| if time.time() > stop_time: |
| TestFail("Timeout", doCrash=True) |
| |
| |
| class TestResult: |
| def __init__(self, operationName, result): |
| self.operationName = operationName |
| self.result = result |
| |
| def assertStatusEqual(self, expected): |
| if self.result is None: |
| raise Exception(f"{self.operationName}: no result got") |
| if self.result.status != expected: |
| raise Exception( |
| f"{self.operationName}: expected status {expected}, got {self.result.status}") |
| return self |
| |
| def assertValueEqual(self, expected): |
| self.assertStatusEqual(0) |
| if self.result is None: |
| raise Exception(f"{self.operationName}: no result got") |
| if self.result.value != expected: |
| raise Exception( |
| f"{self.operationName}: expected value {expected}, got {self.result.value}") |
| return self |
| |
| |
| class BaseTestHelper: |
| def __init__(self, nodeid: int, paaTrustStorePath: str, testCommissioner: bool = False): |
| chip.native.Init() |
| |
| self.chipStack = ChipStack('/tmp/repl_storage.json') |
| self.certificateAuthorityManager = chip.CertificateAuthority.CertificateAuthorityManager(chipStack=self.chipStack) |
| self.certificateAuthority = self.certificateAuthorityManager.NewCertificateAuthority() |
| self.fabricAdmin = self.certificateAuthority.NewFabricAdmin(vendorId=0xFFF1, fabricId=1) |
| self.devCtrl = self.fabricAdmin.NewController( |
| nodeid, paaTrustStorePath, testCommissioner) |
| self.controllerNodeId = nodeid |
| self.logger = logger |
| self.paaTrustStorePath = paaTrustStorePath |
| logging.getLogger().setLevel(logging.DEBUG) |
| |
| async def _GetCommissonedFabricCount(self, nodeid: int): |
| data = await self.devCtrl.ReadAttribute(nodeid, [(Clusters.OperationalCredentials.Attributes.CommissionedFabrics)]) |
| return data[0][Clusters.OperationalCredentials][Clusters.OperationalCredentials.Attributes.CommissionedFabrics] |
| |
| def _WaitForOneDiscoveredDevice(self, timeoutSeconds: int = 2): |
| print("Waiting for device responses...") |
| strlen = 100 |
| addrStrStorage = ctypes.create_string_buffer(strlen) |
| timeout = time.time() + timeoutSeconds |
| while (not self.devCtrl.GetIPForDiscoveredDevice(0, addrStrStorage, strlen) and time.time() <= timeout): |
| time.sleep(0.2) |
| if time.time() > timeout: |
| return None |
| return ctypes.string_at(addrStrStorage).decode("utf-8") |
| |
| def TestDiscovery(self, discriminator: int): |
| self.logger.info( |
| f"Discovering commissionable nodes with discriminator {discriminator}") |
| res = self.devCtrl.DiscoverCommissionableNodes( |
| chip.discovery.FilterType.LONG_DISCRIMINATOR, discriminator, stopOnFirst=True, timeoutSecond=3) |
| if not res: |
| self.logger.info( |
| f"Device not found") |
| return False |
| self.logger.info(f"Found device {res[0]}") |
| return res[0] |
| |
| def CreateNewFabricController(self): |
| self.logger.info("Creating 2nd Fabric Admin") |
| self.fabricAdmin2 = self.certificateAuthority.NewFabricAdmin(vendorId=0xFFF1, fabricId=2) |
| |
| self.logger.info("Creating Device Controller on 2nd Fabric") |
| self.devCtrl2 = self.fabricAdmin2.NewController( |
| self.controllerNodeId, self.paaTrustStorePath) |
| return True |
| |
| async def TestRevokeCommissioningWindow(self, ip: str, setuppin: int, nodeid: int): |
| await self.devCtrl.SendCommand(nodeid, 0, Clusters.AdministratorCommissioning.Commands.OpenBasicCommissioningWindow(180), timedRequestTimeoutMs=10000) |
| if not self.TestPaseOnly(ip=ip, setuppin=setuppin, nodeid=nodeid, devCtrl=self.devCtrl2): |
| return False |
| |
| await self.devCtrl2.SendCommand(nodeid, 0, Clusters.GeneralCommissioning.Commands.ArmFailSafe(expiryLengthSeconds=180, breadcrumb=0)) |
| |
| await self.devCtrl.SendCommand(nodeid, 0, Clusters.AdministratorCommissioning.Commands.RevokeCommissioning(), timedRequestTimeoutMs=10000) |
| await self.devCtrl.SendCommand(nodeid, 0, Clusters.AdministratorCommissioning.Commands.OpenBasicCommissioningWindow(180), timedRequestTimeoutMs=10000) |
| await self.devCtrl.SendCommand(nodeid, 0, Clusters.AdministratorCommissioning.Commands.RevokeCommissioning(), timedRequestTimeoutMs=10000) |
| return True |
| |
| def TestEnhancedCommissioningWindow(self, ip: str, nodeid: int): |
| pin, code = self.devCtrl.OpenCommissioningWindow(nodeid=nodeid, timeout=600, iteration=10000, discriminator=3840, option=1) |
| return self.TestPaseOnly(ip=ip, nodeid=nodeid, setuppin=pin, devCtrl=self.devCtrl2) |
| |
| def TestPaseOnly(self, ip: str, setuppin: int, nodeid: int, devCtrl=None): |
| if devCtrl is None: |
| devCtrl = self.devCtrl |
| self.logger.info( |
| "Attempting to establish PASE session with device id: {} addr: {}".format(str(nodeid), ip)) |
| if devCtrl.EstablishPASESessionIP( |
| ip, setuppin, nodeid) is not None: |
| self.logger.info( |
| "Failed to establish PASE session with device id: {} addr: {}".format(str(nodeid), ip)) |
| return False |
| self.logger.info( |
| "Successfully established PASE session with device id: {} addr: {}".format(str(nodeid), ip)) |
| return True |
| |
| def TestCommissionOnly(self, nodeid: int): |
| self.logger.info( |
| "Commissioning device with id {}".format(nodeid)) |
| if not self.devCtrl.Commission(nodeid): |
| self.logger.info( |
| "Failed to commission device with id {}".format(str(nodeid))) |
| return False |
| self.logger.info( |
| "Successfully commissioned device with id {}".format(str(nodeid))) |
| return True |
| |
| def TestKeyExchangeBLE(self, discriminator: int, setuppin: int, nodeid: int): |
| self.logger.info( |
| "Conducting key exchange with device {}".format(discriminator)) |
| if not self.devCtrl.ConnectBLE(discriminator, setuppin, nodeid): |
| self.logger.info( |
| "Failed to finish key exchange with device {}".format(discriminator)) |
| return False |
| self.logger.info("Device finished key exchange.") |
| return True |
| |
| def TestCommissionFailure(self, nodeid: int, failAfter: int): |
| self.devCtrl.ResetTestCommissioner() |
| a = self.devCtrl.SetTestCommissionerSimulateFailureOnStage(failAfter) |
| if not a: |
| # We're not going to hit this stage during commissioning so no sense trying, just say it was fine. |
| return True |
| |
| self.logger.info( |
| "Commissioning device, expecting failure after stage {}".format(failAfter)) |
| self.devCtrl.Commission(nodeid) |
| return self.devCtrl.CheckTestCommissionerCallbacks() and self.devCtrl.CheckTestCommissionerPaseConnection(nodeid) |
| |
| def TestCommissionFailureOnReport(self, nodeid: int, failAfter: int): |
| self.devCtrl.ResetTestCommissioner() |
| a = self.devCtrl.SetTestCommissionerSimulateFailureOnReport(failAfter) |
| if not a: |
| # We're not going to hit this stage during commissioning so no sense trying, just say it was fine. |
| return True |
| self.logger.info( |
| "Commissioning device, expecting failure on report for stage {}".format(failAfter)) |
| self.devCtrl.Commission(nodeid) |
| return self.devCtrl.CheckTestCommissionerCallbacks() and self.devCtrl.CheckTestCommissionerPaseConnection(nodeid) |
| |
| def TestCommissioning(self, ip: str, setuppin: int, nodeid: int): |
| self.logger.info("Commissioning device {}".format(ip)) |
| if not self.devCtrl.CommissionIP(ip, setuppin, nodeid): |
| self.logger.info( |
| "Failed to finish commissioning device {}".format(ip)) |
| return False |
| self.logger.info("Commissioning finished.") |
| return True |
| |
| def TestCommissioningWithSetupPayload(self, setupPayload: str, nodeid: int): |
| self.logger.info("Commissioning device with setup payload {}".format(setupPayload)) |
| if not self.devCtrl.CommissionWithCode(setupPayload, nodeid): |
| self.logger.info( |
| "Failed to finish commissioning device {}".format(setupPayload)) |
| return False |
| self.logger.info("Commissioning finished.") |
| return True |
| |
| def TestUsedTestCommissioner(self): |
| return self.devCtrl.GetTestCommissionerUsed() |
| |
| def TestFailsafe(self, nodeid: int): |
| self.logger.info("Testing arm failsafe") |
| |
| self.logger.info("Setting failsafe on CASE connection") |
| err, resp = self.devCtrl.ZCLSend("GeneralCommissioning", "ArmFailSafe", nodeid, |
| 0, 0, dict(expiryLengthSeconds=60, breadcrumb=1), blocking=True) |
| if err != 0: |
| self.logger.error( |
| "Failed to send arm failsafe command error is {} with im response{}".format(err, resp)) |
| return False |
| |
| if resp.errorCode is not Clusters.GeneralCommissioning.Enums.CommissioningError.kOk: |
| self.logger.error( |
| "Incorrect response received from arm failsafe - wanted OK, received {}".format(resp)) |
| return False |
| |
| self.logger.info( |
| "Attempting to open basic commissioning window - this should fail since the failsafe is armed") |
| try: |
| res = asyncio.run(self.devCtrl.SendCommand( |
| nodeid, 0, Clusters.AdministratorCommissioning.Commands.OpenBasicCommissioningWindow(180), timedRequestTimeoutMs=10000)) |
| # we actually want the exception here because we want to see a failure, so return False here |
| self.logger.error( |
| 'Incorrectly succeeded in opening basic commissioning window') |
| return False |
| except Exception as ex: |
| pass |
| |
| # TODO: pipe through the commissioning window opener so we can test enhanced properly. The pake verifier is just garbage because none of of the functions to calculate |
| # it or serialize it are available right now. However, this command should fail BEFORE that becomes an issue. |
| discriminator = 1111 |
| salt = secrets.token_bytes(16) |
| iterations = 2000 |
| # not the right size or the right contents, but it won't matter |
| verifier = secrets.token_bytes(32) |
| self.logger.info( |
| "Attempting to open enhanced commissioning window - this should fail since the failsafe is armed") |
| try: |
| res = asyncio.run(self.devCtrl.SendCommand(nodeid, 0, Clusters.AdministratorCommissioning.Commands.OpenCommissioningWindow( |
| commissioningTimeout=180, PAKEPasscodeVerifier=verifier, discriminator=discriminator, iterations=iterations, salt=salt), timedRequestTimeoutMs=10000)) |
| # we actually want the exception here because we want to see a failure, so return False here |
| self.logger.error( |
| 'Incorrectly succeeded in opening enhanced commissioning window') |
| return False |
| except Exception as ex: |
| pass |
| |
| self.logger.info("Disarming failsafe on CASE connection") |
| err, resp = self.devCtrl.ZCLSend("GeneralCommissioning", "ArmFailSafe", nodeid, |
| 0, 0, dict(expiryLengthSeconds=0, breadcrumb=1), blocking=True) |
| if err != 0: |
| self.logger.error( |
| "Failed to send arm failsafe command error is {} with im response{}".format(err, resp)) |
| return False |
| |
| self.logger.info( |
| "Opening Commissioning Window - this should succeed since the failsafe was just disarmed") |
| try: |
| res = asyncio.run(self.devCtrl.SendCommand( |
| nodeid, 0, Clusters.AdministratorCommissioning.Commands.OpenBasicCommissioningWindow(180), timedRequestTimeoutMs=10000)) |
| except Exception as ex: |
| self.logger.error( |
| 'Failed to open commissioning window after disarming failsafe') |
| return False |
| |
| self.logger.info( |
| "Attempting to arm failsafe over CASE - this should fail since the commissioning window is open") |
| err, resp = self.devCtrl.ZCLSend("GeneralCommissioning", "ArmFailSafe", nodeid, |
| 0, 0, dict(expiryLengthSeconds=60, breadcrumb=1), blocking=True) |
| if err != 0: |
| self.logger.error( |
| "Failed to send arm failsafe command error is {} with im response{}".format(err, resp)) |
| return False |
| if resp.errorCode is Clusters.GeneralCommissioning.Enums.CommissioningError.kBusyWithOtherAdmin: |
| return True |
| return False |
| |
| async def TestControllerCATValues(self, nodeid: int): |
| ''' This tests controllers using CAT Values |
| ''' |
| # Allocate a new controller instance with a CAT tag. |
| newControllers = await CommissioningBuildingBlocks.CreateControllersOnFabric(fabricAdmin=self.fabricAdmin, adminDevCtrl=self.devCtrl, controllerNodeIds=[300], targetNodeId=nodeid, privilege=None, catTags=[0x0001_0001]) |
| |
| # Read out an attribute using the new controller. It has no privileges, so this should fail with an UnsupportedAccess error. |
| res = await newControllers[0].ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.AccessControl.Attributes.Acl)]) |
| if (res[0][Clusters.AccessControl][Clusters.AccessControl.Attributes.Acl].Reason.status != IM.Status.UnsupportedAccess): |
| self.logger.error(f"1: Received data instead of an error:{res}") |
| return False |
| |
| # Grant the new controller privilege by adding the CAT tag to the subject. |
| await CommissioningBuildingBlocks.GrantPrivilege(adminCtrl=self.devCtrl, grantedCtrl=newControllers[0], privilege=Clusters.AccessControl.Enums.AccessControlEntryPrivilegeEnum.kAdminister, targetNodeId=nodeid, targetCatTags=[0x0001_0001]) |
| |
| # Read out the attribute again - this time, it should succeed. |
| res = await newControllers[0].ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.AccessControl.Attributes.Acl)]) |
| if (type(res[0][Clusters.AccessControl][Clusters.AccessControl.Attributes.Acl][0]) != Clusters.AccessControl.Structs.AccessControlEntryStruct): |
| self.logger.error(f"2: Received something other than data:{res}") |
| return False |
| |
| # Reset the privilege back to pre-test. |
| await CommissioningBuildingBlocks.GrantPrivilege(adminCtrl=self.devCtrl, grantedCtrl=newControllers[0], privilege=None, targetNodeId=nodeid) |
| |
| newControllers[0].Shutdown() |
| |
| return True |
| |
| async def TestMultiControllerFabric(self, nodeid: int): |
| ''' This tests having multiple controller instances on the same fabric. |
| ''' |
| |
| # Create two new controllers on the same fabric with no privilege on the target node. |
| newControllers = await CommissioningBuildingBlocks.CreateControllersOnFabric(fabricAdmin=self.fabricAdmin, adminDevCtrl=self.devCtrl, controllerNodeIds=[100, 200], targetNodeId=nodeid, privilege=None) |
| |
| # |
| # Read out the ACL list from one of the newly minted controllers which has no access. This should return an IM error. |
| # |
| res = await newControllers[0].ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.AccessControl.Attributes.Acl)]) |
| if (res[0][Clusters.AccessControl][Clusters.AccessControl.Attributes.Acl].Reason.status != IM.Status.UnsupportedAccess): |
| self.logger.error(f"1: Received data instead of an error:{res}") |
| return False |
| |
| # |
| # Read out the ACL list from an existing controller with admin privileges. This should return back valid data. |
| # Doing this ensures that we're not somehow aliasing the CASE sessions. |
| # |
| res = await self.devCtrl.ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.AccessControl.Attributes.Acl)]) |
| if (type(res[0][Clusters.AccessControl][Clusters.AccessControl.Attributes.Acl][0]) != Clusters.AccessControl.Structs.AccessControlEntryStruct): |
| self.logger.error(f"2: Received something other than data:{res}") |
| return False |
| |
| # |
| # Re-do the previous read from the unprivileged controller just to do an ABA test to prove we haven't switched the CASE sessions |
| # under-neath. |
| # |
| res = await newControllers[0].ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.AccessControl.Attributes.Acl)]) |
| if (res[0][Clusters.AccessControl][Clusters.AccessControl.Attributes.Acl].Reason.status != IM.Status.UnsupportedAccess): |
| self.logger.error(f"3: Received data instead of an error:{res}") |
| return False |
| |
| # |
| # Grant the new controller admin privileges. Reading out the ACL cluster should now yield data. |
| # |
| await CommissioningBuildingBlocks.GrantPrivilege(adminCtrl=self.devCtrl, grantedCtrl=newControllers[0], privilege=Clusters.AccessControl.Enums.AccessControlEntryPrivilegeEnum.kAdminister, targetNodeId=nodeid) |
| res = await newControllers[0].ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.AccessControl.Attributes.Acl)]) |
| if (type(res[0][Clusters.AccessControl][Clusters.AccessControl.Attributes.Acl][0]) != Clusters.AccessControl.Structs.AccessControlEntryStruct): |
| self.logger.error(f"4: Received something other than data:{res}") |
| return False |
| |
| # |
| # Grant the second new controller admin privileges as well. Reading out the ACL cluster should now yield data. |
| # |
| await CommissioningBuildingBlocks.GrantPrivilege(adminCtrl=self.devCtrl, grantedCtrl=newControllers[1], privilege=Clusters.AccessControl.Enums.AccessControlEntryPrivilegeEnum.kAdminister, targetNodeId=nodeid) |
| res = await newControllers[1].ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.AccessControl.Attributes.Acl)]) |
| if (type(res[0][Clusters.AccessControl][Clusters.AccessControl.Attributes.Acl][0]) != Clusters.AccessControl.Structs.AccessControlEntryStruct): |
| self.logger.error(f"5: Received something other than data:{res}") |
| return False |
| |
| # |
| # Grant the second new controller just view privilege. Reading out the ACL cluster should return no data. |
| # |
| await CommissioningBuildingBlocks.GrantPrivilege(adminCtrl=self.devCtrl, grantedCtrl=newControllers[1], privilege=Clusters.AccessControl.Enums.AccessControlEntryPrivilegeEnum.kView, targetNodeId=nodeid) |
| res = await newControllers[1].ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.AccessControl.Attributes.Acl)]) |
| if (res[0][Clusters.AccessControl][Clusters.AccessControl.Attributes.Acl].Reason.status != IM.Status.UnsupportedAccess): |
| self.logger.error(f"6: Received data5 instead of an error:{res}") |
| return False |
| |
| # |
| # Read the Basic cluster from the 2nd controller. This is possible with just view privileges. |
| # |
| res = await newControllers[1].ReadAttribute(nodeid=nodeid, attributes=[(0, Clusters.BasicInformation.Attributes.ClusterRevision)]) |
| if (type(res[0][Clusters.BasicInformation][Clusters.BasicInformation.Attributes.ClusterRevision]) != Clusters.BasicInformation.Attributes.ClusterRevision.attribute_type.Type): |
| self.logger.error(f"7: Received something other than data:{res}") |
| return False |
| |
| newControllers[0].Shutdown() |
| newControllers[1].Shutdown() |
| |
| return True |
| |
| async def TestAddUpdateRemoveFabric(self, nodeid: int): |
| logger.info("Testing AddNOC, UpdateNOC and RemoveFabric") |
| |
| self.logger.info("Waiting for attribute read for CommissionedFabrics") |
| startOfTestFabricCount = await self._GetCommissonedFabricCount(nodeid) |
| |
| tempCertificateAuthority = self.certificateAuthorityManager.NewCertificateAuthority() |
| tempFabric = tempCertificateAuthority.NewFabricAdmin(vendorId=0xFFF1, fabricId=1) |
| tempDevCtrl = tempFabric.NewController(self.controllerNodeId, self.paaTrustStorePath) |
| |
| self.logger.info("Starting AddNOC using same node ID") |
| if not await CommissioningBuildingBlocks.AddNOCForNewFabricFromExisting(self.devCtrl, tempDevCtrl, nodeid, nodeid): |
| self.logger.error("AddNOC failed") |
| return False |
| |
| expectedFabricCountUntilRemoveFabric = startOfTestFabricCount + 1 |
| if expectedFabricCountUntilRemoveFabric != await self._GetCommissonedFabricCount(nodeid): |
| self.logger.error("Expected commissioned fabric count to change after AddNOC") |
| return False |
| |
| self.logger.info("Starting UpdateNOC using same node ID") |
| if not await CommissioningBuildingBlocks.UpdateNOC(tempDevCtrl, nodeid, nodeid): |
| self.logger.error("UpdateNOC using same node ID failed") |
| return False |
| |
| if expectedFabricCountUntilRemoveFabric != await self._GetCommissonedFabricCount(nodeid): |
| self.logger.error("Expected commissioned fabric count to remain unchanged after UpdateNOC") |
| return False |
| |
| self.logger.info("Starting UpdateNOC using different node ID") |
| newNodeIdForUpdateNoc = nodeid + 1 |
| if not await CommissioningBuildingBlocks.UpdateNOC(tempDevCtrl, nodeid, newNodeIdForUpdateNoc): |
| self.logger.error("UpdateNOC using different node ID failed") |
| return False |
| |
| if expectedFabricCountUntilRemoveFabric != await self._GetCommissonedFabricCount(nodeid): |
| self.logger.error("Expected commissioned fabric count to remain unchanged after UpdateNOC with new node ID") |
| return False |
| |
| # TODO Read using old node ID and expect that it fails. |
| |
| currentFabricIndexResponse = await tempDevCtrl.ReadAttribute(newNodeIdForUpdateNoc, [(Clusters.OperationalCredentials.Attributes.CurrentFabricIndex)]) |
| updatedNOCFabricIndex = currentFabricIndexResponse[0][Clusters.OperationalCredentials][Clusters.OperationalCredentials.Attributes.CurrentFabricIndex] |
| removeFabricResponse = await tempDevCtrl.SendCommand(newNodeIdForUpdateNoc, 0, Clusters.OperationalCredentials.Commands.RemoveFabric(updatedNOCFabricIndex)) |
| |
| if startOfTestFabricCount != await self._GetCommissonedFabricCount(nodeid): |
| self.logger.error("Expected fabric count to be the same at the end of test as when it started") |
| return False |
| |
| tempDevCtrl.Shutdown() |
| tempFabric.Shutdown() |
| return True |
| |
| async def TestCaseEviction(self, nodeid: int): |
| self.logger.info("Testing CASE eviction") |
| |
| minimumCASESessionsPerFabric = 3 |
| minimumSupportedFabrics = 16 |
| |
| # |
| # This test exercises the ability to allocate more sessions than are supported in the |
| # pool configuration. By going beyond (minimumSupportedFabrics * minimumCASESessionsPerFabric), |
| # it starts to test out the eviction logic. This specific test does not validate the specifics |
| # of eviction, just that allocation and CASE session establishment proceeds successfully on both |
| # the controller and target. |
| # |
| for x in range(minimumSupportedFabrics * minimumCASESessionsPerFabric * 2): |
| self.devCtrl.CloseSession(nodeid) |
| await self.devCtrl.ReadAttribute(nodeid, [(Clusters.BasicInformation.Attributes.ClusterRevision)]) |
| |
| self.logger.info("Testing CASE defunct logic") |
| |
| # |
| # This tests establishes a subscription on a given CASE session, then marks it defunct (to simulate |
| # encountering a transport timeout on the session). |
| # |
| # Then, we write to the attribute that was subscribed to from a *different* fabric and check to ensure we still get a report |
| # on the sub we established previously. Since it was just marked defunct, it should return back to being |
| # active and a report should get delivered. |
| # |
| sawValueChange = False |
| |
| def OnValueChange(path: Attribute.TypedAttributePath, transaction: Attribute.SubscriptionTransaction) -> None: |
| nonlocal sawValueChange |
| self.logger.info("Saw value change!") |
| if (path.AttributeType == Clusters.UnitTesting.Attributes.Int8u and path.Path.EndpointId == 1): |
| sawValueChange = True |
| |
| self.logger.info("Testing CASE defunct logic") |
| |
| sub = await self.devCtrl.ReadAttribute(nodeid, [(Clusters.UnitTesting.Attributes.Int8u)], reportInterval=(0, 1)) |
| sub.SetAttributeUpdateCallback(OnValueChange) |
| |
| # |
| # This marks the session defunct. |
| # |
| self.devCtrl.CloseSession(nodeid) |
| |
| # |
| # Now write the attribute from fabric2, give it some time before checking if the report |
| # was received. |
| # |
| await self.devCtrl2.WriteAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.Int8u(4))]) |
| time.sleep(2) |
| |
| sub.Shutdown() |
| |
| if sawValueChange is False: |
| self.logger.error("Didn't see value change in time, likely because sub got terminated due to unexpected session eviction!") |
| return False |
| |
| # |
| # In this test, we're going to setup a subscription on fabric1 through devCtl, then, constantly keep |
| # evicting sessions on fabric2 (devCtl2) by cycling through closing sessions followed by issuing a Read. This |
| # should result in evictions on the server on fabric2, but not affect any sessions on fabric1. To test this, |
| # we're going to setup a subscription to an attribute prior to the cycling reads, and check at the end of the |
| # test that it's still valid by writing to an attribute from a *different* fabric, and validating that we see |
| # the change on the established subscription. That proves that the session from fabric1 is still valid and untouched. |
| # |
| self.logger.info("Testing fabric-isolated CASE eviction") |
| |
| sawValueChange = False |
| sub = await self.devCtrl.ReadAttribute(nodeid, [(Clusters.UnitTesting.Attributes.Int8u)], reportInterval=(0, 1)) |
| sub.SetAttributeUpdateCallback(OnValueChange) |
| |
| for x in range(minimumSupportedFabrics * minimumCASESessionsPerFabric * 2): |
| self.devCtrl2.CloseSession(nodeid) |
| await self.devCtrl2.ReadAttribute(nodeid, [(Clusters.BasicInformation.Attributes.ClusterRevision)]) |
| |
| # |
| # Now write the attribute from fabric2, give it some time before checking if the report |
| # was received. |
| # |
| await self.devCtrl2.WriteAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.Int8u(4))]) |
| time.sleep(2) |
| |
| sub.Shutdown() |
| |
| if sawValueChange is False: |
| self.logger.error("Didn't see value change in time, likely because sub got terminated due to other fabric (fabric1)") |
| return False |
| |
| # |
| # Do the same test again, but reversing the roles of fabric1 and fabric2. |
| # |
| self.logger.info("Testing fabric-isolated CASE eviction (reverse)") |
| |
| sawValueChange = False |
| sub = await self.devCtrl2.ReadAttribute(nodeid, [(Clusters.UnitTesting.Attributes.Int8u)], reportInterval=(0, 1)) |
| sub.SetAttributeUpdateCallback(OnValueChange) |
| |
| for x in range(minimumSupportedFabrics * minimumCASESessionsPerFabric * 2): |
| self.devCtrl.CloseSession(nodeid) |
| await self.devCtrl.ReadAttribute(nodeid, [(Clusters.BasicInformation.Attributes.ClusterRevision)]) |
| |
| await self.devCtrl.WriteAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.Int8u(4))]) |
| time.sleep(2) |
| |
| sub.Shutdown() |
| |
| if sawValueChange is False: |
| self.logger.error("Didn't see value change in time, likely because sub got terminated due to other fabric (fabric2)") |
| return False |
| |
| return True |
| |
| async def TestMultiFabric(self, ip: str, setuppin: int, nodeid: int): |
| self.logger.info("Opening Commissioning Window") |
| |
| await self.devCtrl.SendCommand(nodeid, 0, Clusters.AdministratorCommissioning.Commands.OpenBasicCommissioningWindow(180), timedRequestTimeoutMs=10000) |
| |
| self.logger.info("Creating 2nd Fabric Admin") |
| self.fabricAdmin2 = self.certificateAuthority.NewFabricAdmin(vendorId=0xFFF1, fabricId=2) |
| |
| self.logger.info("Creating Device Controller on 2nd Fabric") |
| self.devCtrl2 = self.fabricAdmin2.NewController( |
| self.controllerNodeId, self.paaTrustStorePath) |
| |
| if not self.devCtrl2.CommissionIP(ip, setuppin, nodeid): |
| self.logger.info( |
| "Failed to finish key exchange with device {}".format(ip)) |
| return False |
| |
| # |
| # Shut-down all the controllers (which will free them up) |
| # |
| self.logger.info( |
| "Shutting down controllers & fabrics and re-initing stack...") |
| |
| self.certificateAuthorityManager.Shutdown() |
| |
| self.logger.info("Shutdown completed, starting new controllers...") |
| |
| self.certificateAuthorityManager = chip.CertificateAuthority.CertificateAuthorityManager(chipStack=self.chipStack) |
| self.certificateAuthority = self.certificateAuthorityManager.NewCertificateAuthority() |
| self.fabricAdmin = self.certificateAuthority.NewFabricAdmin(vendorId=0xFFF1, fabricId=1) |
| |
| fabricAdmin2 = self.certificateAuthority.NewFabricAdmin(vendorId=0xFFF1, fabricId=2) |
| |
| self.devCtrl = self.fabricAdmin.NewController( |
| self.controllerNodeId, self.paaTrustStorePath) |
| self.devCtrl2 = fabricAdmin2.NewController( |
| self.controllerNodeId, self.paaTrustStorePath) |
| |
| self.logger.info("Waiting for attribute reads...") |
| |
| data1 = await self.devCtrl.ReadAttribute(nodeid, [(Clusters.OperationalCredentials.Attributes.NOCs)], fabricFiltered=False) |
| data2 = await self.devCtrl2.ReadAttribute(nodeid, [(Clusters.OperationalCredentials.Attributes.NOCs)], fabricFiltered=False) |
| |
| # Read out noclist from each fabric, and each should contain two NOCs. |
| nocList1 = data1[0][Clusters.OperationalCredentials][Clusters.OperationalCredentials.Attributes.NOCs] |
| nocList2 = data2[0][Clusters.OperationalCredentials][Clusters.OperationalCredentials.Attributes.NOCs] |
| |
| if (len(nocList1) != 2 or len(nocList2) != 2): |
| self.logger.error("Got back invalid nocList") |
| return False |
| |
| data1 = await self.devCtrl.ReadAttribute(nodeid, [(Clusters.OperationalCredentials.Attributes.CurrentFabricIndex)], fabricFiltered=False) |
| data2 = await self.devCtrl2.ReadAttribute(nodeid, [(Clusters.OperationalCredentials.Attributes.CurrentFabricIndex)], fabricFiltered=False) |
| |
| # Read out current fabric from each fabric, and both should be different. |
| self.currentFabric1 = data1[0][Clusters.OperationalCredentials][ |
| Clusters.OperationalCredentials.Attributes.CurrentFabricIndex] |
| self.currentFabric2 = data2[0][Clusters.OperationalCredentials][ |
| Clusters.OperationalCredentials.Attributes.CurrentFabricIndex] |
| if (self.currentFabric1 == self.currentFabric2): |
| self.logger.error( |
| "Got back fabric indices that match for two different fabrics!") |
| return False |
| |
| self.logger.info("Attribute reads completed...") |
| return True |
| |
| async def TestFabricSensitive(self, nodeid: int): |
| expectedDataFabric1 = [ |
| Clusters.UnitTesting.Structs.TestFabricScoped(), |
| Clusters.UnitTesting.Structs.TestFabricScoped() |
| ] |
| |
| expectedDataFabric1[0].fabricIndex = 100 |
| expectedDataFabric1[0].fabricSensitiveInt8u = 33 |
| expectedDataFabric1[0].optionalFabricSensitiveInt8u = 34 |
| expectedDataFabric1[0].nullableFabricSensitiveInt8u = 35 |
| expectedDataFabric1[0].nullableOptionalFabricSensitiveInt8u = Clusters.Types.NullValue |
| expectedDataFabric1[0].fabricSensitiveCharString = "alpha1" |
| expectedDataFabric1[0].fabricSensitiveStruct.a = 36 |
| expectedDataFabric1[0].fabricSensitiveInt8uList = [1, 2, 3, 4] |
| |
| expectedDataFabric1[1].fabricIndex = 100 |
| expectedDataFabric1[1].fabricSensitiveInt8u = 43 |
| expectedDataFabric1[1].optionalFabricSensitiveInt8u = 44 |
| expectedDataFabric1[1].nullableFabricSensitiveInt8u = 45 |
| expectedDataFabric1[1].nullableOptionalFabricSensitiveInt8u = Clusters.Types.NullValue |
| expectedDataFabric1[1].fabricSensitiveCharString = "alpha2" |
| expectedDataFabric1[1].fabricSensitiveStruct.a = 46 |
| expectedDataFabric1[1].fabricSensitiveInt8uList = [2, 3, 4, 5] |
| |
| self.logger.info("Writing data from fabric1...") |
| |
| await self.devCtrl.WriteAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped(expectedDataFabric1))]) |
| |
| expectedDataFabric2 = copy.deepcopy(expectedDataFabric1) |
| |
| expectedDataFabric2[0].fabricSensitiveInt8u = 133 |
| expectedDataFabric2[0].optionalFabricSensitiveInt8u = 134 |
| expectedDataFabric2[0].nullableFabricSensitiveInt8u = 135 |
| expectedDataFabric2[0].fabricSensitiveCharString = "beta1" |
| expectedDataFabric2[0].fabricSensitiveStruct.a = 136 |
| expectedDataFabric2[0].fabricSensitiveInt8uList = [11, 12, 13, 14] |
| |
| expectedDataFabric2[1].fabricSensitiveInt8u = 143 |
| expectedDataFabric2[1].optionalFabricSensitiveInt8u = 144 |
| expectedDataFabric2[1].nullableFabricSensitiveInt8u = 145 |
| expectedDataFabric2[1].fabricSensitiveCharString = "beta2" |
| expectedDataFabric2[1].fabricSensitiveStruct.a = 146 |
| expectedDataFabric2[1].fabricSensitiveStruct.f = 147 |
| expectedDataFabric2[1].fabricSensitiveInt8uList = [12, 13, 14, 15] |
| |
| self.logger.info("Writing data from fabric2...") |
| |
| await self.devCtrl2.WriteAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped(expectedDataFabric2))]) |
| |
| # |
| # Now read the data back filtered from fabric1 and ensure it matches. |
| # |
| self.logger.info("Reading back data from fabric1...") |
| |
| data = await self.devCtrl.ReadAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped)]) |
| readListDataFabric1 = data[1][Clusters.UnitTesting][Clusters.UnitTesting.Attributes.ListFabricScoped] |
| |
| # |
| # Update the expected data's fabric index to that we just read back |
| # before we attempt to compare the data |
| # |
| expectedDataFabric1[0].fabricIndex = self.currentFabric1 |
| expectedDataFabric1[1].fabricIndex = self.currentFabric1 |
| |
| self.logger.info("Comparing data on fabric1...") |
| if (expectedDataFabric1 != readListDataFabric1): |
| raise AssertionError("Got back mismatched data") |
| |
| self.logger.info("Reading back data from fabric2...") |
| |
| data = await self.devCtrl2.ReadAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped)]) |
| readListDataFabric2 = data[1][Clusters.UnitTesting][Clusters.UnitTesting.Attributes.ListFabricScoped] |
| |
| # |
| # Update the expected data's fabric index to that we just read back |
| # before we attempt to compare the data |
| # |
| expectedDataFabric2[0].fabricIndex = self.currentFabric2 |
| expectedDataFabric2[1].fabricIndex = self.currentFabric2 |
| |
| self.logger.info("Comparing data on fabric2...") |
| if (expectedDataFabric2 != readListDataFabric2): |
| raise AssertionError("Got back mismatched data") |
| |
| self.logger.info( |
| "Reading back unfiltered data across all fabrics from fabric1...") |
| |
| def CompareUnfilteredData(accessingFabric, otherFabric, expectedData): |
| index = 0 |
| |
| self.logger.info( |
| f"Comparing data from accessing fabric {accessingFabric}...") |
| |
| for item in readListDataFabric: |
| if (item.fabricIndex == accessingFabric): |
| if (index == 2): |
| raise AssertionError( |
| "Got back more data than expected") |
| |
| if (item != expectedData[index]): |
| raise AssertionError("Got back mismatched data") |
| |
| index = index + 1 |
| else: |
| # |
| # We should not be able to see any fabric sensitive data from the non accessing fabric. |
| # Aside from the fabric index, everything else in TestFabricScoped is marked sensitive so we should |
| # only see defaults for that data. Instantiate an instance of that struct |
| # which should automatically be initialized with defaults and compare that |
| # against what we got back. |
| # |
| expectedDefaultData = Clusters.UnitTesting.Structs.TestFabricScoped() |
| expectedDefaultData.fabricIndex = otherFabric |
| |
| if (item != expectedDefaultData): |
| raise AssertionError("Got back mismatched data") |
| |
| data = await self.devCtrl.ReadAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped)], fabricFiltered=False) |
| readListDataFabric = data[1][Clusters.UnitTesting][Clusters.UnitTesting.Attributes.ListFabricScoped] |
| CompareUnfilteredData(self.currentFabric1, |
| self.currentFabric2, expectedDataFabric1) |
| |
| data = await self.devCtrl2.ReadAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped)], fabricFiltered=False) |
| readListDataFabric = data[1][Clusters.UnitTesting][Clusters.UnitTesting.Attributes.ListFabricScoped] |
| CompareUnfilteredData(self.currentFabric2, |
| self.currentFabric1, expectedDataFabric2) |
| |
| self.logger.info("Writing smaller list from alpha (again)") |
| |
| expectedDataFabric1[0].fabricIndex = 100 |
| expectedDataFabric1[0].fabricSensitiveInt8u = 53 |
| expectedDataFabric1[0].optionalFabricSensitiveInt8u = 54 |
| expectedDataFabric1[0].nullableFabricSensitiveInt8u = 55 |
| expectedDataFabric1[0].nullableOptionalFabricSensitiveInt8u = Clusters.Types.NullValue |
| expectedDataFabric1[0].fabricSensitiveCharString = "alpha3" |
| expectedDataFabric1[0].fabricSensitiveStruct.a = 56 |
| expectedDataFabric1[0].fabricSensitiveInt8uList = [51, 52, 53, 54] |
| |
| expectedDataFabric1.pop(1) |
| |
| await self.devCtrl.WriteAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped(expectedDataFabric1))]) |
| |
| self.logger.info( |
| "Reading back data (again) from fabric2 to ensure it hasn't changed") |
| |
| data = await self.devCtrl2.ReadAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped)]) |
| readListDataFabric2 = data[1][Clusters.UnitTesting][Clusters.UnitTesting.Attributes.ListFabricScoped] |
| if (expectedDataFabric2 != readListDataFabric2): |
| raise AssertionError("Got back mismatched data") |
| |
| self.logger.info( |
| "Reading back data (again) from fabric1 to ensure it hasn't changed") |
| |
| data = await self.devCtrl.ReadAttribute(nodeid, [(1, Clusters.UnitTesting.Attributes.ListFabricScoped)]) |
| readListDataFabric1 = data[1][Clusters.UnitTesting][Clusters.UnitTesting.Attributes.ListFabricScoped] |
| |
| self.logger.info("Comparing data on fabric1...") |
| expectedDataFabric1[0].fabricIndex = self.currentFabric1 |
| if (expectedDataFabric1 != readListDataFabric1): |
| raise AssertionError("Got back mismatched data") |
| |
| async def TestResubscription(self, nodeid: int): |
| ''' This validates the re-subscription logic by triggering a liveness failure caused by the expiration |
| of the underlying CASE session and the resultant failure to receive reports from the server. This should |
| trigger CASE session establishment and subscription restablishment. Both the attempt and successful |
| restablishment of the subscription are validated. |
| ''' |
| cv = asyncio.Condition() |
| resubAttempted = False |
| resubSucceeded = True |
| |
| async def OnResubscriptionAttempted(transaction, errorEncountered: int, nextResubscribeIntervalMsec: int): |
| self.logger.info("Re-subscription Attempted") |
| nonlocal resubAttempted |
| resubAttempted = True |
| |
| async def OnResubscriptionSucceeded(transaction): |
| self.logger.info("Re-subscription Succeeded") |
| nonlocal cv |
| async with cv: |
| cv.notify() |
| |
| subscription = await self.devCtrl.ReadAttribute(nodeid, [(Clusters.BasicInformation.Attributes.ClusterRevision)], reportInterval=(0, 5)) |
| |
| # |
| # Register async callbacks that will fire when a re-sub is attempted or succeeds. |
| # |
| subscription.SetResubscriptionAttemptedCallback(OnResubscriptionAttempted, True) |
| subscription.SetResubscriptionSucceededCallback(OnResubscriptionSucceeded, True) |
| |
| # |
| # Over-ride the default liveness timeout (which is set quite high to accomodate for |
| # transport delays) to something very small. This ensures that our liveness timer will |
| # fire quickly and cause a re-subscription to occur naturally. |
| # |
| subscription.OverrideLivenessTimeoutMs(100) |
| |
| async with cv: |
| if (not (resubAttempted) or not (resubSucceeded)): |
| res = await asyncio.wait_for(cv.wait(), 3) |
| if not res: |
| self.logger.error("Timed out waiting for resubscription to succeed") |
| return False |
| |
| subscription.Shutdown() |
| return True |
| |
| def TestCloseSession(self, nodeid: int): |
| self.logger.info(f"Closing sessions with device {nodeid}") |
| try: |
| self.devCtrl.CloseSession(nodeid) |
| return True |
| except Exception as ex: |
| self.logger.exception( |
| f"Failed to close sessions with device {nodeid}: {ex}") |
| return False |
| |
| def SetNetworkCommissioningParameters(self, dataset: str): |
| self.logger.info("Setting network commissioning parameters") |
| self.devCtrl.SetThreadOperationalDataset(bytes.fromhex(dataset)) |
| return True |
| |
| def TestOnOffCluster(self, nodeid: int, endpoint: int, group: int): |
| self.logger.info( |
| "Sending On/Off commands to device {} endpoint {}".format(nodeid, endpoint)) |
| err, resp = self.devCtrl.ZCLSend("OnOff", "On", nodeid, |
| endpoint, group, {}, blocking=True) |
| if err != 0: |
| self.logger.error( |
| "failed to send OnOff.On: error is {} with im response{}".format(err, resp)) |
| return False |
| err, resp = self.devCtrl.ZCLSend("OnOff", "Off", nodeid, |
| endpoint, group, {}, blocking=True) |
| if err != 0: |
| self.logger.error( |
| "failed to send OnOff.Off: error is {} with im response {}".format(err, resp)) |
| return False |
| return True |
| |
| def TestLevelControlCluster(self, nodeid: int, endpoint: int, group: int): |
| self.logger.info( |
| f"Sending MoveToLevel command to device {nodeid} endpoint {endpoint}") |
| try: |
| commonArgs = dict(transitionTime=0, optionsMask=1, optionsOverride=1) |
| |
| # Move to 1 |
| self.devCtrl.ZCLSend("LevelControl", "MoveToLevel", nodeid, |
| endpoint, group, dict(**commonArgs, level=1), blocking=True) |
| res = self.devCtrl.ZCLReadAttribute(cluster="LevelControl", |
| attribute="CurrentLevel", |
| nodeid=nodeid, |
| endpoint=endpoint, |
| groupid=group) |
| TestResult("Read attribute LevelControl.CurrentLevel", |
| res).assertValueEqual(1) |
| |
| # Move to 254 |
| self.devCtrl.ZCLSend("LevelControl", "MoveToLevel", nodeid, |
| endpoint, group, dict(**commonArgs, level=254), blocking=True) |
| res = self.devCtrl.ZCLReadAttribute(cluster="LevelControl", |
| attribute="CurrentLevel", |
| nodeid=nodeid, |
| endpoint=endpoint, |
| groupid=group) |
| TestResult("Read attribute LevelControl.CurrentLevel", |
| res).assertValueEqual(254) |
| |
| return True |
| except Exception as ex: |
| self.logger.exception(f"Level cluster test failed: {ex}") |
| return False |
| |
| def TestResolve(self, nodeid): |
| self.logger.info( |
| "Resolve: node id = {:08x}".format(nodeid)) |
| try: |
| self.devCtrl.ResolveNode(nodeid=nodeid) |
| addr = None |
| |
| start = time.time() |
| while not addr: |
| addr = self.devCtrl.GetAddressAndPort(nodeid) |
| if time.time() - start > 10: |
| self.logger.exception(f"Timeout waiting for address...") |
| break |
| |
| if not addr: |
| time.sleep(0.2) |
| |
| if not addr: |
| self.logger.exception(f"Addr is missing...") |
| return False |
| self.logger.info(f"Resolved address: {addr[0]}:{addr[1]}") |
| return True |
| except Exception as ex: |
| self.logger.exception("Failed to resolve. {}".format(ex)) |
| return False |
| |
| def TestReadBasicAttributes(self, nodeid: int, endpoint: int, group: int): |
| basic_cluster_attrs = { |
| "VendorName": "TEST_VENDOR", |
| "VendorID": 0xFFF1, |
| "ProductName": "TEST_PRODUCT", |
| "ProductID": 0x8001, |
| "NodeLabel": "Test", |
| "Location": "XX", |
| "HardwareVersion": 0, |
| "HardwareVersionString": "TEST_VERSION", |
| "SoftwareVersion": 1, |
| "SoftwareVersionString": "1.0", |
| } |
| failed_zcl = {} |
| for basic_attr, expected_value in basic_cluster_attrs.items(): |
| try: |
| res = self.devCtrl.ZCLReadAttribute(cluster="BasicInformation", |
| attribute=basic_attr, |
| nodeid=nodeid, |
| endpoint=endpoint, |
| groupid=group) |
| TestResult(f"Read attribute {basic_attr}", res).assertValueEqual( |
| expected_value) |
| except Exception as ex: |
| failed_zcl[basic_attr] = str(ex) |
| if failed_zcl: |
| self.logger.exception(f"Following attributes failed: {failed_zcl}") |
| return False |
| return True |
| |
| def TestWriteBasicAttributes(self, nodeid: int, endpoint: int, group: int): |
| @ dataclass |
| class AttributeWriteRequest: |
| cluster: str |
| attribute: str |
| value: Any |
| expected_status: IM.Status = IM.Status.Success |
| |
| requests = [ |
| AttributeWriteRequest("BasicInformation", "NodeLabel", "Test"), |
| AttributeWriteRequest("BasicInformation", "Location", |
| "a pretty loooooooooooooog string", IM.Status.ConstraintError), |
| ] |
| failed_zcl = [] |
| for req in requests: |
| try: |
| try: |
| self.devCtrl.ZCLWriteAttribute(cluster=req.cluster, |
| attribute=req.attribute, |
| nodeid=nodeid, |
| endpoint=endpoint, |
| groupid=group, |
| value=req.value) |
| if req.expected_status != IM.Status.Success: |
| raise AssertionError( |
| f"Write attribute {req.cluster}.{req.attribute} expects failure but got success response") |
| except Exception as ex: |
| if req.expected_status != IM.Status.Success: |
| continue |
| else: |
| raise ex |
| res = self.devCtrl.ZCLReadAttribute( |
| cluster=req.cluster, attribute=req.attribute, nodeid=nodeid, endpoint=endpoint, groupid=group) |
| TestResult(f"Read attribute {req.cluster}.{req.attribute}", res).assertValueEqual( |
| req.value) |
| except Exception as ex: |
| failed_zcl.append(str(ex)) |
| if failed_zcl: |
| self.logger.exception(f"Following attributes failed: {failed_zcl}") |
| return False |
| return True |
| |
| def TestSubscription(self, nodeid: int, endpoint: int): |
| desiredPath = None |
| receivedUpdate = 0 |
| updateLock = threading.Lock() |
| updateCv = threading.Condition(updateLock) |
| |
| def OnValueChange(path: Attribute.TypedAttributePath, transaction: Attribute.SubscriptionTransaction) -> None: |
| nonlocal desiredPath, updateCv, updateLock, receivedUpdate |
| if path.Path != desiredPath: |
| return |
| |
| data = transaction.GetAttribute(path) |
| logger.info( |
| f"Received report from server: path: {path.Path}, value: {data}") |
| with updateLock: |
| receivedUpdate += 1 |
| updateCv.notify_all() |
| |
| class _conductAttributeChange(threading.Thread): |
| def __init__(self, devCtrl: ChipDeviceCtrl.ChipDeviceController, nodeid: int, endpoint: int): |
| super(_conductAttributeChange, self).__init__() |
| self.nodeid = nodeid |
| self.endpoint = endpoint |
| self.devCtrl = devCtrl |
| |
| def run(self): |
| for i in range(5): |
| time.sleep(3) |
| self.devCtrl.ZCLSend( |
| "OnOff", "Toggle", self.nodeid, self.endpoint, 0, {}) |
| |
| try: |
| desiredPath = Clusters.Attribute.AttributePath( |
| EndpointId=1, ClusterId=6, AttributeId=0) |
| # OnOff Cluster, OnOff Attribute |
| subscription = self.devCtrl.ZCLSubscribeAttribute( |
| "OnOff", "OnOff", nodeid, endpoint, 1, 10) |
| subscription.SetAttributeUpdateCallback(OnValueChange) |
| changeThread = _conductAttributeChange( |
| self.devCtrl, nodeid, endpoint) |
| # Reset the number of subscriptions received as subscribing causes a callback. |
| changeThread.start() |
| with updateCv: |
| while receivedUpdate < 5: |
| # We should observe 5 attribute changes |
| # The changing thread will change the value after 3 seconds. If we're waiting more than 10, assume something |
| # is really wrong and bail out here with some information. |
| if not updateCv.wait(10.0): |
| self.logger.error( |
| f"Failed to receive subscription update") |
| break |
| |
| # thread changes 5 times, and sleeps for 3 seconds in between. Add an additional 3 seconds of slack. Timeout is in seconds. |
| changeThread.join(18.0) |
| |
| # |
| # Clean-up by shutting down the sub. Otherwise, we're going to get callbacks through OnValueChange on what will soon become an invalid |
| # execution context above. |
| # |
| subscription.Shutdown() |
| |
| if changeThread.is_alive(): |
| # Thread join timed out |
| self.logger.error(f"Failed to join change thread") |
| return False |
| |
| return True if receivedUpdate == 5 else False |
| |
| except Exception as ex: |
| self.logger.exception(f"Failed to finish API test: {ex}") |
| return False |
| |
| return True |
| |
| def TestNonControllerAPIs(self): |
| ''' |
| This function validates various APIs provided by chip package which is not related to controller. |
| TODO: Add more tests for APIs |
| ''' |
| try: |
| cluster = self.devCtrl.GetClusterHandler() |
| clusterInfo = cluster.GetClusterInfoById(0xFFF1FC05) # TestCluster |
| if clusterInfo["clusterName"] != "UnitTesting": |
| raise Exception( |
| f"Wrong cluster info clusterName: {clusterInfo['clusterName']} expected 'UnitTesting'") |
| except Exception as ex: |
| self.logger.exception(f"Failed to finish API test: {ex}") |
| return False |
| return True |
| |
| def TestFabricScopedCommandDuringPase(self, nodeid: int): |
| '''Validates that fabric-scoped commands fail during PASE with UNSUPPORTED_ACCESS |
| |
| The nodeid is the PASE pseudo-node-ID used during PASE establishment |
| ''' |
| status = None |
| try: |
| response = asyncio.run(self.devCtrl.SendCommand( |
| nodeid, 0, Clusters.OperationalCredentials.Commands.UpdateFabricLabel("roboto"))) |
| except IM.InteractionModelError as ex: |
| status = ex.status |
| |
| return status == IM.Status.UnsupportedAccess |