| #!/usr/bin/env python3 |
| |
| # Copyright (c) 2020 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| import json |
| import optparse |
| import os |
| import re |
| import shutil |
| import sys |
| import tarfile |
| import textwrap |
| from typing import Any, Dict |
| |
| import constants |
| import stateful_shell |
| import yaml |
| from sample_app_util import zap_file_parser |
| |
| TermColors = constants.TermColors |
| |
| shell = stateful_shell.StatefulShell() |
| |
| _CHEF_SCRIPT_PATH = os.path.abspath(os.path.dirname(__file__)) |
| _REPO_BASE_PATH = os.path.join(_CHEF_SCRIPT_PATH, "../../") |
| _DEVICE_FOLDER = os.path.join(_CHEF_SCRIPT_PATH, "devices") |
| _DEVICE_LIST = [file[:-4] |
| for file in os.listdir(_DEVICE_FOLDER) if file.endswith(".zap") and file != 'template.zap'] |
| _CICD_CONFIG_FILE_NAME = os.path.join(_CHEF_SCRIPT_PATH, "cicd_config.json") |
| _CD_STAGING_DIR = os.path.join(_CHEF_SCRIPT_PATH, "staging") |
| |
| gen_dir = "" # Filled in after sample app type is read from args. |
| |
| |
| def splash() -> None: |
| splashText = textwrap.dedent( |
| f"""\ |
| {TermColors.STRBOLD}{TermColors.STRYELLOW} |
| ______ __ __ _______ _______ |
| / || | | | | ____|| ____| |
| | ,----'| |__| | | |__ | |__ |
| | | | __ | | __| | __| |
| | `----.| | | | | |____ | | |
| \\______||__| |__| |_______||__|{TermColors.STRRESET} |
| """) |
| flush_print(splashText) |
| |
| |
| def load_config() -> None: |
| config = dict() |
| config["nrfconnect"] = dict() |
| config["esp32"] = dict() |
| config["silabs-thread"] = dict() |
| config["ameba"] = dict() |
| configFile = f"{_CHEF_SCRIPT_PATH}/config.yaml" |
| if (os.path.exists(configFile)): |
| configStream = open(configFile, 'r') |
| config = yaml.load(configStream, Loader=yaml.SafeLoader) |
| configStream.close() |
| else: |
| flush_print("Running for the first time and configuring config.yaml. " + |
| "Change this configuration file to include correct configuration " + |
| "for the vendor's SDK") |
| configStream = open(configFile, 'w') |
| config["nrfconnect"]["ZEPHYR_BASE"] = os.environ.get('ZEPHYR_BASE') |
| config["nrfconnect"]["ZEPHYR_SDK_INSTALL_DIR"] = os.environ.get( |
| 'ZEPHYR_SDK_INSTALL_DIR') |
| config["nrfconnect"]["TTY"] = None |
| config["esp32"]["IDF_PATH"] = os.environ.get('IDF_PATH') |
| config["esp32"]["TTY"] = None |
| config["silabs-thread"]["GECKO_SDK"] = f"{_REPO_BASE_PATH}third_party/efr32_sdk/repo" |
| config["silabs-thread"]["TTY"] = None |
| config["silabs-thread"]["CU"] = None |
| config["silabs-thread"]["SILABS_BOARD"] = None |
| config["ameba"]["AMEBA_SDK"] = None |
| config["ameba"]["MATTER_SDK"] = None |
| config["ameba"]["MODEL"] = 'D' |
| config["ameba"]["TTY"] = None |
| |
| flush_print(yaml.dump(config)) |
| yaml.dump(config, configStream) |
| configStream.close() |
| |
| return config |
| |
| |
| def check_python_version() -> None: |
| if sys.version_info[0] < 3: |
| flush_print('Must use Python 3. Current version is ' + |
| str(sys.version_info[0])) |
| exit(1) |
| |
| |
| def load_cicd_config() -> Dict[str, Any]: |
| with open(_CICD_CONFIG_FILE_NAME) as config_file: |
| config = json.loads(config_file.read()) |
| return config |
| |
| |
| def flush_print( |
| to_print: str, |
| with_border: bool = False) -> None: |
| """Prints and flushes stdout buffer. |
| |
| Args: |
| to_print: The string to print. |
| with_border: Add boarder above and below to_print. |
| """ |
| if with_border: |
| border = ('-' * len(to_print)) + '\n' |
| to_print = f"{border}{to_print}\n{border}" |
| print(to_print, flush=True) |
| |
| |
| def unwrap_cmd(cmd: str) -> str: |
| """Dedent and replace new line with space.""" |
| return textwrap.dedent(cmd).replace("\n", " ") |
| |
| |
| def bundle(platform: str, device_name: str) -> None: |
| """Filters files from the build output folder for CD. |
| Clears _CD_STAGING_DIR. |
| Calls bundle_{platform}(device_name). |
| exit(1) for missing bundle_{platform}. |
| Adds .matter files into _CD_STAGING_DIR. |
| Generates metadata for device in _CD_STAGING_DIR. |
| |
| Args: |
| platform: The platform to bundle. |
| device_name: The example to bundle. |
| """ |
| bundler_name = f"bundle_{platform}" |
| matter_file = f"{device_name}.matter" |
| zap_file = os.path.join(_DEVICE_FOLDER, f"{device_name}.zap") |
| flush_print(f"Bundling {platform}", with_border=True) |
| flush_print(f"Cleaning {_CD_STAGING_DIR}") |
| shutil.rmtree(_CD_STAGING_DIR, ignore_errors=True) |
| os.mkdir(_CD_STAGING_DIR) |
| flush_print(f"Checking for {bundler_name}") |
| chef_module = sys.modules[__name__] |
| if hasattr(chef_module, bundler_name): |
| flush_print(f"Found {bundler_name}") |
| bundler = getattr(chef_module, bundler_name) |
| bundler(device_name) |
| else: |
| flush_print(f"No bundle function for {platform}!") |
| exit(1) |
| flush_print(f"Copying {matter_file}") |
| src_item = os.path.join(_DEVICE_FOLDER, |
| matter_file) |
| dest_item = os.path.join(_CD_STAGING_DIR, matter_file) |
| shutil.copy(src_item, dest_item) |
| flush_print(f"Generating metadata for {device_name}") |
| metadata_file = zap_file_parser.generate_metadata_file(zap_file) |
| metadata_dest = os.path.join(_CD_STAGING_DIR, |
| os.path.basename(metadata_file)) |
| shutil.copy(metadata_file, metadata_dest) |
| |
| |
| # |
| # Per-platform bundle functions |
| # |
| |
| |
| def bundle_linux(device_name: str) -> None: |
| linux_root = os.path.join(_CHEF_SCRIPT_PATH, |
| "linux", |
| "out") |
| map_file_name = f"{device_name}.map" |
| src_item = os.path.join(linux_root, device_name) |
| dest_item = os.path.join(_CD_STAGING_DIR, device_name) |
| shutil.copy(src_item, dest_item) |
| src_item = os.path.join(linux_root, map_file_name) |
| dest_item = os.path.join(_CD_STAGING_DIR, map_file_name) |
| shutil.copy(src_item, dest_item) |
| |
| |
| def bundle_nrfconnect(device_name: str) -> None: |
| zephyr_exts = ["elf", "map", "hex"] |
| script_files = ["firmware_utils.py", |
| "nrfconnect_firmware_utils.py"] |
| nrf_root = os.path.join(_CHEF_SCRIPT_PATH, |
| "nrfconnect", |
| "build", |
| "zephyr") |
| scripts_root = os.path.join(_REPO_BASE_PATH, |
| "scripts", |
| "flashing") |
| gen_script_path = os.path.join(scripts_root, |
| "gen_flashing_script.py") |
| sub_dir = os.path.join(_CD_STAGING_DIR, device_name) |
| os.mkdir(sub_dir) |
| for zephyr_ext in zephyr_exts: |
| input_base = f"zephyr.{zephyr_ext}" |
| output_base = f"{device_name}.{zephyr_ext}" |
| src_item = os.path.join(nrf_root, input_base) |
| if zephyr_ext == "hex": |
| dest_item = os.path.join(sub_dir, output_base) |
| else: |
| dest_item = os.path.join(_CD_STAGING_DIR, output_base) |
| shutil.copy(src_item, dest_item) |
| for script_file in script_files: |
| src_item = os.path.join(scripts_root, script_file) |
| dest_item = os.path.join(sub_dir, script_file) |
| shutil.copy(src_item, dest_item) |
| shell.run_cmd(f"cd {sub_dir}") |
| command = f"""\ |
| python3 {gen_script_path} nrfconnect |
| --output {device_name}.flash.py |
| --application {device_name}.hex""" |
| shell.run_cmd(unwrap_cmd(command)) |
| |
| |
| def bundle_esp32(device_name: str) -> None: |
| """Reference example for bundle_{platform} |
| functions, which should copy/move files from a build |
| output dir into _CD_STAGING_DIR to be archived. |
| |
| Args: |
| device_name: The device to bundle. |
| """ |
| esp_root = os.path.join(_CHEF_SCRIPT_PATH, |
| "esp32", |
| "build") |
| manifest_file = os.path.join(esp_root, |
| "chip-shell.flashbundle.txt") |
| with open(manifest_file) as manifest: |
| for item in manifest: |
| item = item.strip() |
| src_item = os.path.join(esp_root, item) |
| dest_item = os.path.join(_CD_STAGING_DIR, item) |
| os.makedirs(os.path.dirname(dest_item), exist_ok=True) |
| shutil.copy(src_item, dest_item) |
| |
| |
| def main() -> int: |
| |
| check_python_version() |
| config = load_config() |
| cicd_config = load_cicd_config() |
| |
| # |
| # Build environment switches |
| # |
| |
| if sys.platform == "win32": |
| flush_print( |
| 'Windows is currently not supported. Use Linux or MacOS platforms') |
| exit(1) |
| |
| # |
| # Arguments parser |
| # |
| |
| deviceTypes = "\n ".join(_DEVICE_LIST) |
| |
| usage = textwrap.dedent(f"""\ |
| usage: chef.py [options] |
| |
| Platforms: |
| nrfconnect |
| esp32 |
| linux |
| silabs-thread |
| ameba |
| |
| Device Types: |
| {deviceTypes} |
| |
| Notes: |
| - Whenever you change a device type, make sure to also use options -zbe |
| - Be careful if you have more than one device connected. |
| The script assumes you have only one device connected and might flash the wrong one |
| """) |
| parser = optparse.OptionParser(usage=usage) |
| |
| parser.add_option("-u", "--update_toolchain", help="updates toolchain & installs zap", |
| action="store_true", dest="do_update_toolchain") |
| parser.add_option("-b", "--build", help="builds", |
| action="store_true", dest="do_build") |
| parser.add_option("-c", "--clean", help="clean build. Only valid if also building", |
| action="store_true", dest="do_clean") |
| parser.add_option("-f", "--flash", help="flashes device", |
| action="store_true", dest="do_flash") |
| parser.add_option("-e", "--erase", help="erases flash before flashing. Only valid if also flashing", |
| action="store_true", dest="do_erase") |
| parser.add_option("-i", "--terminal", help="opens terminal to interact with with device", |
| action="store_true", dest="do_interact") |
| parser.add_option("-m", "--menuconfig", help="runs menuconfig on platforms that support it", |
| action="store_true", dest="do_menuconfig") |
| parser.add_option("-z", "--zap", help="runs zap to generate data model & interaction model artifacts", |
| action="store_true", dest="do_run_zap") |
| parser.add_option("-g", "--zapgui", help="runs zap GUI display to allow editing of data model", |
| action="store_true", dest="do_run_gui") |
| parser.add_option("-d", "--device", dest="sample_device_type_name", |
| help="specifies device type. Default is lighting. See info above for supported device types", |
| metavar="TARGET", choices=_DEVICE_LIST) |
| parser.add_option("-t", "--target", type='choice', |
| action='store', |
| dest="build_target", |
| help="specifies target platform. See info below for currently supported target platforms", |
| choices=['nrfconnect', 'esp32', |
| 'linux', 'silabs-thread', 'ameba'], |
| metavar="TARGET", |
| default="linux") |
| parser.add_option("-r", "--rpc", |
| help=("enables Pigweed RPC interface. Enabling RPC disables the shell interface. " |
| "Your sdkconfig configurations will be reverted to default. Default is PW RPC off. " |
| "When enabling or disabling this flag, on the first build force a clean build with -c"), |
| action="store_true", dest="do_rpc", default=False) |
| parser.add_option("-a", "--automated_test_stamp", |
| help="provide the additional stamp \"branch:commit_id\" as the software version string for automated tests.", |
| action="store_true", dest="do_automated_test_stamp") |
| parser.add_option("-v", "--vid", dest="vid", type=int, |
| help="specifies the Vendor ID. Default is 0xFFF1", metavar="VID", default=0xFFF1) |
| parser.add_option("-p", "--pid", dest="pid", type=int, |
| help="specifies the Product ID. Default is 0x8000", metavar="PID", default=0x8000) |
| parser.add_option("-P", "--pname", dest="pname", type=str, metavar="PRODUCT_NAME", |
| help="specifies the Product Name. Default is TEST_PRODUCT", default="TEST_PRODUCT") |
| parser.add_option("", "--rpc_console", help="Opens PW RPC Console", |
| action="store_true", dest="do_rpc_console") |
| parser.add_option("-y", "--tty", |
| help="Enumerated USB tty/serial interface enumerated for your physical device. E.g.: /dev/ACM0", |
| dest="tty", metavar="TTY", default=None) |
| # Build CD params. |
| parser.add_option("", "--build_all", |
| help=("For use in CD only. Builds and bundles all chef examples for " |
| "the specified platform. Chef exits after completion."), |
| dest="build_all", action="store_true") |
| parser.add_option("", "--dry_run", help="Display list of target builds of the --build_all command without building them.", |
| dest="dry_run", action="store_true") |
| parser.add_option("", "--build_exclude", |
| help=("For use with --build_all. Build labels to exclude. " |
| "Accepts a regex pattern. Mutually exclusive with --build_include."), |
| dest="build_exclude") |
| parser.add_option("", "--build_include", |
| help=("For use with --build_all. Build labels to include. " |
| "Accepts a regex pattern. Mutually exclusive with --build_exclude."), |
| dest="build_include") |
| parser.add_option("-k", "--keep_going", |
| help="For use in CD only. Continues building all sample apps in the event of an error.", |
| dest="keep_going", action="store_true") |
| parser.add_option("", "--ci", |
| help=("Builds Chef examples defined in cicd_config. " |
| "Uses specified target from -t. Chef exits after completion."), |
| dest="ci", action="store_true") |
| parser.add_option( |
| "", "--enable_ipv4", help="Enable IPv4 mDNS. Only applicable to platforms that can support IPV4 (e.g, Linux, ESP32)", |
| action="store_true", default=False) |
| parser.add_option( |
| "", "--cpu_type", help="CPU type to compile for. Linux only.", choices=["arm64", "arm", "x64"]) |
| |
| options, _ = parser.parse_args(sys.argv[1:]) |
| |
| splash() |
| |
| # |
| # CI |
| # |
| |
| if options.ci: |
| for device_name in cicd_config["ci_allow_list"]: |
| if device_name not in _DEVICE_LIST: |
| flush_print( |
| f"{device_name} in CICD config but not {_DEVICE_FOLDER}!") |
| exit(1) |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}") |
| command = f"./chef.py -cbr -d {device_name} -t {options.build_target}" |
| flush_print(f"Building {command}", with_border=True) |
| shell.run_cmd(command) |
| bundle(options.build_target, device_name) |
| exit(0) |
| |
| # |
| # CD |
| # |
| |
| if options.build_all: |
| if options.build_include and options.build_exclude: |
| flush_print( |
| "Error. --build_include and --build_exclude are mutually exclusive options.") |
| exit(1) |
| flush_print("Building all chef examples") |
| archive_prefix = "/workspace/artifacts/" |
| archive_suffix = ".tar.gz" |
| failed_builds = [] |
| for device_name in _DEVICE_LIST: |
| for platform, label_args in cicd_config["cd_platforms"].items(): |
| for label, args in label_args.items(): |
| archive_name = f"{label}-{device_name}" |
| if options.build_exclude and re.search(options.build_exclude, archive_name): |
| continue |
| elif options.build_include and not re.search(options.build_include, archive_name): |
| continue |
| if options.dry_run: |
| flush_print(archive_name) |
| continue |
| command = f"./chef.py -cbr -d {device_name} -t {platform} " |
| command += " ".join(args) |
| flush_print(f"Building {command}", with_border=True) |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}") |
| try: |
| shell.run_cmd(command) |
| except RuntimeError as build_fail_error: |
| failed_builds.append((device_name, platform, "build")) |
| flush_print(str(build_fail_error)) |
| if not options.keep_going: |
| exit(1) |
| continue |
| try: |
| bundle(platform, device_name) |
| except FileNotFoundError as bundle_fail_error: |
| failed_builds.append((device_name, platform, "bundle")) |
| flush_print(str(bundle_fail_error)) |
| if not options.keep_going: |
| exit(1) |
| continue |
| os.makedirs(archive_prefix, exist_ok=True) |
| archive_full_name = archive_prefix + archive_name + archive_suffix |
| flush_print( |
| f"Adding build output to archive {archive_full_name}") |
| if os.path.exists(archive_full_name): |
| os.remove(archive_full_name) |
| with tarfile.open(archive_full_name, "w:gz") as tar: |
| tar.add(_CD_STAGING_DIR, arcname=".") |
| if len(failed_builds) == 0: |
| flush_print("No build failures", with_border=True) |
| else: |
| flush_print("Logging build failures", with_border=True) |
| for failed_build in failed_builds: |
| fail_log = f"""\ |
| Device: {failed_build[0]}, |
| Platform: {failed_build[1]}, |
| Phase: {failed_build[2]}""" |
| flush_print(unwrap_cmd(fail_log)) |
| exit(0) |
| |
| # |
| # Platform Folder |
| # |
| |
| flush_print(f"Target is set to {options.sample_device_type_name}") |
| global gen_dir |
| gen_dir = ( |
| f"{_CHEF_SCRIPT_PATH}/out/{options.sample_device_type_name}/zap-generated/") |
| |
| flush_print("Setting up environment...") |
| if options.build_target == "esp32": |
| if config['esp32']['IDF_PATH'] is None: |
| flush_print( |
| 'Path for esp32 SDK was not found. Make sure esp32.IDF_PATH is set on your config.yaml file') |
| exit(1) |
| shell.run_cmd(f'source {config["esp32"]["IDF_PATH"]}/export.sh') |
| elif options.build_target == "nrfconnect": |
| if config['nrfconnect']['ZEPHYR_BASE'] is None: |
| flush_print( |
| 'The path for nrfconnect SDK was not found. Make sure nrfconnect.ZEPHYR_BASE is set on your config.yaml file. This is typically <NCS INSTALL PATH>/ncs/vX.X.X/zephyr') |
| exit(1) |
| if config['nrfconnect']['ZEPHYR_SDK_INSTALL_DIR'] is None: |
| flush_print( |
| 'The path for nrfconnect toolchain was not found. Make sure nrfconnect.ZEPHYR_SDK_INSTALL_DIR is set on your config.yaml file. This is typically <NCS INSTALL PATH>/ncs/toolchains/vX.X.X/opt/zephyr-sdk') |
| exit(1) |
| zephyr_sdk_dir = config['nrfconnect']['ZEPHYR_SDK_INSTALL_DIR'] |
| shell.run_cmd("export ZEPHYR_TOOLCHAIN_VARIANT=zephyr") |
| shell.run_cmd(f"export ZEPHYR_SDK_INSTALL_DIR={zephyr_sdk_dir}") |
| shell.run_cmd( |
| f"export ZEPHYR_BASE={config['nrfconnect']['ZEPHYR_BASE']}") |
| shell.run_cmd( |
| f'source {config["nrfconnect"]["ZEPHYR_BASE"]}/zephyr-env.sh') |
| # QUIRK: |
| # When the Zephyr SDK is installed as a part of the NCS toolchain, the build system will use |
| # build tools from the NCS toolchain, but it will not update the PATH and LD_LIBRARY_PATH |
| # and hence the build will fail. This ideally, should be handled automatically by the NCS |
| # build system but until it is fixed, set the variables manually. |
| ncs_toolchain_dir = os.path.abspath(f"{zephyr_sdk_dir}/../..") |
| if os.path.exists(os.path.join(ncs_toolchain_dir, 'manifest.json')): |
| shell.run_cmd(f"export PATH=$PATH:{ncs_toolchain_dir}/usr/bin") |
| shell.run_cmd( |
| f"export PATH=$PATH:{ncs_toolchain_dir}/usr/local/bin") |
| shell.run_cmd( |
| f"export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:{ncs_toolchain_dir}/usr/lib") |
| shell.run_cmd( |
| f"export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:{ncs_toolchain_dir}/usr/local/lib") |
| elif options.build_target == "linux": |
| pass |
| elif options.build_target == "silabs-thread": |
| flush_print('Path to gecko sdk is configured within Matter.') |
| if 'SILABS_BOARD' not in config['silabs-thread'] or config['silabs-thread']['SILABS_BOARD'] is None: |
| flush_print( |
| 'SILABS_BOARD was not configured. Make sure silabs-thread.SILABS_BOARD is set on your config.yaml file') |
| exit(1) |
| silabs_board = config['silabs-thread']['SILABS_BOARD'] |
| elif options.build_target == "ameba": |
| if config['ameba']['AMEBA_SDK'] is None: |
| flush_print( |
| 'Path for Ameba SDK was not found. Make sure AMEBA_SDK is set on your config.yaml file') |
| exit(1) |
| if config['ameba']['MATTER_SDK'] is None: |
| flush_print( |
| 'Path for Matter SDK was not found. Make sure MATTER_SDK is set on your config.yaml file') |
| exit(1) |
| if (config['ameba']['MODEL'] != 'D' and config['ameba']['MODEL'] != 'Z2'): |
| flush_print("Ameba Model is not recognized, please input D or Z2") |
| exit(1) |
| else: |
| flush_print(f"Target {options.build_target} not supported") |
| |
| shell.run_cmd(f"source {_REPO_BASE_PATH}/scripts/activate.sh") |
| |
| # |
| # Toolchain update |
| # |
| |
| if options.do_update_toolchain: |
| if options.build_target == "esp32": |
| flush_print("ESP32 toolchain update not supported. Skipping") |
| elif options.build_target == "nrfconnect": |
| flush_print("Updating toolchain") |
| shell.run_cmd( |
| f"cd {_REPO_BASE_PATH} && python3 scripts/setup/nrfconnect/update_ncs.py --update") |
| elif options.build_target == "silabs-thread": |
| flush_print("Silabs-thread toolchain not supported. Skipping") |
| elif options.build_target == "linux": |
| flush_print("Linux toolchain update not supported. Skipping") |
| elif options.build_target == "Ameba": |
| flush_print("Ameba toolchain update not supported. Skipping") |
| |
| # |
| # Clean environment |
| # |
| if options.do_clean: |
| if options.build_target == "esp32": |
| shell.run_cmd(f"rm -f {_CHEF_SCRIPT_PATH}/esp32/sdkconfig") |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32") |
| shell.run_cmd(f"rm -rf {_CHEF_SCRIPT_PATH}/esp32/build") |
| shell.run_cmd("idf.py fullclean") |
| |
| # |
| # Cluster customization |
| # |
| |
| if options.do_run_gui: |
| flush_print("Starting ZAP GUI editor") |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/devices") |
| shell.run_cmd( |
| f"{_REPO_BASE_PATH}/scripts/tools/zap/run_zaptool.sh {options.sample_device_type_name}.zap") |
| |
| if options.do_run_zap: |
| flush_print("Running ZAP script to generate artifacts") |
| shell.run_cmd(f"rm -rf {gen_dir}") |
| shell.run_cmd(f"mkdir -p {gen_dir}") |
| shell.run_cmd( |
| f"{_REPO_BASE_PATH}/scripts/tools/zap/generate.py " |
| f"{_CHEF_SCRIPT_PATH}/devices/{options.sample_device_type_name}.zap -o {gen_dir}") |
| |
| # |
| # Setup environment |
| # |
| if options.do_rpc: |
| flush_print("RPC PW enabled") |
| if options.build_target == "esp32": |
| shell.run_cmd( |
| f"export SDKCONFIG_DEFAULTS={_CHEF_SCRIPT_PATH}/esp32/sdkconfig_rpc.defaults") |
| shell.run_cmd( |
| f"[ -f {_CHEF_SCRIPT_PATH}/esp32/sdkconfig ] || cp " |
| f"{_CHEF_SCRIPT_PATH}/esp32/sdkconfig_rpc.defaults {_CHEF_SCRIPT_PATH}/esp32/sdkconfig") |
| else: |
| flush_print(f"RPC PW on {options.build_target} not supported") |
| |
| else: |
| flush_print("RPC PW disabled") |
| if (options.build_target == "esp32"): |
| shell.run_cmd( |
| f"export SDKCONFIG_DEFAULTS={_CHEF_SCRIPT_PATH}/esp32/sdkconfig.defaults") |
| shell.run_cmd( |
| f"[ -f {_CHEF_SCRIPT_PATH}/esp32/sdkconfig ] || cp " |
| f"{_CHEF_SCRIPT_PATH}/esp32/sdkconfig.defaults {_CHEF_SCRIPT_PATH}/esp32/sdkconfig") |
| |
| # |
| # Menuconfig |
| # |
| |
| if options.do_menuconfig: |
| if options.build_target == "esp32": |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32") |
| shell.run_cmd("idf.py menuconfig") |
| elif options.build_target == "nrfconnect": |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/nrfconnect") |
| shell.run_cmd("west build -t menuconfig") |
| elif (options.build_target == "silabs-thread") or (options.build_target == "silabs-wifi"): |
| flush_print( |
| "Menuconfig not available on Silabs-thread target. Skipping") |
| elif options.build_target == "linux": |
| flush_print("Menuconfig not available on Linux target. Skipping") |
| elif options.build_target == "Ameba": |
| flush_print("Menuconfig not available on Ameba target. Skipping") |
| |
| # |
| # Build |
| # |
| |
| if options.do_build: |
| sw_ver_string = "" |
| |
| if options.do_automated_test_stamp: |
| branch = "" |
| for branch_text in shell.run_cmd("git branch", return_cmd_output=True).split("\n"): |
| match_texts = re.findall(r"\* (.*)", branch_text) |
| if match_texts: |
| branch = match_texts[0] |
| break |
| commit_id = shell.run_cmd( |
| "git rev-parse HEAD", return_cmd_output=True).replace("\n", "") |
| sw_ver_string = f"""{branch}:{commit_id}""" |
| # 64 bytes space could only contain 63 bytes string + 1 byte EOS. |
| if len(sw_ver_string) >= 64: |
| truncated_sw_ver_string = f"""{branch[:22]}:{commit_id}""" |
| flush_print( |
| f"Truncate the software version string from \"{sw_ver_string}\" to " |
| f"\"{truncated_sw_ver_string}\" due to 64 bytes limitation") |
| sw_ver_string = truncated_sw_ver_string |
| |
| flush_print(f"Software Version String: \"{sw_ver_string}\"") |
| flush_print( |
| f"Product ID 0x{options.pid:02X} / Vendor ID 0x{options.vid:02X}") |
| flush_print("Building...") |
| |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}") |
| |
| if (options.build_target == "esp32") or (options.build_target == "nrfconnect") or (options.build_target == "ameba"): |
| with open("project_include.cmake", "w") as f: |
| f.write(textwrap.dedent(f"""\ |
| set(CONFIG_DEVICE_VENDOR_ID {options.vid}) |
| set(CONFIG_DEVICE_PRODUCT_ID {options.pid}) |
| set(CONFIG_DEVICE_PRODUCT_NAME \"{options.pname}\") |
| set(CONFIG_ENABLE_PW_RPC {"1" if options.do_rpc else "0"}) |
| set(SAMPLE_NAME {options.sample_device_type_name}) |
| set(CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING \"{sw_ver_string}\")""")) |
| |
| if options.build_target == "esp32": |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32") |
| if options.enable_ipv4: |
| shell.run_cmd( |
| "sed -i 's/CONFIG_DISABLE_IPV4=y/#\\ CONFIG_DISABLE_IPV4\\ is\\ not\\ set/g' sdkconfig ") |
| else: |
| shell.run_cmd( |
| "sed -i 's/#\\ CONFIG_DISABLE_IPV4\\ is\\ not\\ set/CONFIG_DISABLE_IPV4=y/g' sdkconfig ") |
| shell.run_cmd("idf.py build") |
| shell.run_cmd("idf.py build flashing_script") |
| shell.run_cmd( |
| f"(cd build/ && tar cJvf $(git rev-parse HEAD)-{options.sample_device_type_name}.tar.xz " |
| f"--files-from=chip-shell.flashbundle.txt)") |
| shell.run_cmd( |
| f"cp build/$(git rev-parse HEAD)-{options.sample_device_type_name}.tar.xz {_CHEF_SCRIPT_PATH}") |
| elif options.build_target == "nrfconnect": |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/nrfconnect") |
| nrf_build_cmds = ["west build -b nrf52840dk_nrf52840"] |
| if options.do_clean: |
| nrf_build_cmds.append("-p always") |
| if options.do_rpc: |
| nrf_build_cmds.append("-- -DOVERLAY_CONFIG=rpc.overlay") |
| shell.run_cmd(" ".join(nrf_build_cmds)) |
| |
| elif options.build_target == "silabs-thread": |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/efr32") |
| if options.do_clean: |
| shell.run_cmd(f"rm -rf out/{options.sample_device_type_name}") |
| efr32_cmd_args = [] |
| efr32_cmd_args.append( |
| f'{_REPO_BASE_PATH}/scripts/examples/gn_silabs_example.sh') |
| efr32_cmd_args.append('./') |
| efr32_cmd_args.append(f'out/{options.sample_device_type_name}') |
| efr32_cmd_args.append(f'{silabs_board}') |
| efr32_cmd_args.append( |
| f'\'sample_name=\"{options.sample_device_type_name}\"\'') |
| if sw_ver_string: |
| efr32_cmd_args.append( |
| f'\'chip_device_config_device_software_version_string=\"{sw_ver_string}\"\'') |
| efr32_cmd_args.append('enable_openthread_cli=true') |
| if options.do_rpc: |
| efr32_cmd_args.append('chip_build_libshell=false') |
| efr32_cmd_args.append('\'import("//with_pw_rpc.gni")\'') |
| else: |
| efr32_cmd_args.append('chip_build_libshell=true') |
| shell.run_cmd(" ".join(efr32_cmd_args)) |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}") |
| |
| elif options.build_target == "ameba": |
| if config['ameba']['MODEL'] == 'D': |
| shell.run_cmd( |
| f"cd {config['ameba']['AMEBA_SDK']}/project/realtek_amebaD_va0_example/GCC-RELEASE") |
| if options.do_clean: |
| shell.run_cmd("rm -rf out") |
| shell.run_cmd( |
| f"./build.sh {config['ameba']['MATTER_SDK']} ninja " |
| f"{config['ameba']['AMEBA_SDK']}/project/realtek_amebaD_va0_example/GCC-RELEASE/out chef-app") |
| shell.run_cmd("ninja -C out") |
| elif config['ameba']['MODEL'] == 'Z2': |
| shell.run_cmd( |
| f"cd {config['ameba']['AMEBA_SDK']}/project/realtek_amebaz2_v0_example/GCC-RELEASE") |
| shell.run_cmd("rm -f project_include.mk") |
| cmd = f"{config['ameba']['AMEBA_SDK']}/project/realtek_amebaz2_v0_example/GCC-RELEASE/project_include.mk" |
| with open(cmd, "w") as f: |
| f.write(textwrap.dedent(f"""\ |
| SAMPLE_NAME = {options.sample_device_type_name} |
| CHEF_FLAGS = |
| CHEF_FLAGS += -DCONFIG_DEVICE_VENDOR_ID={options.vid} |
| CHEF_FLAGS += -DCONFIG_DEVICE_PRODUCT_ID={options.pid} |
| CHEF_FLAGS += -DCHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING=\"{options.pid}\" |
| """ |
| )) |
| if options.do_clean: |
| shell.run_cmd("make clean") |
| shell.run_cmd("make chef") |
| shell.run_cmd("make is") |
| |
| elif options.build_target == "linux": |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/linux") |
| |
| linux_args = [] |
| if options.do_rpc: |
| linux_args.append('import("//with_pw_rpc.gni")') |
| linux_args.extend([ |
| 'import("//build_overrides/chip.gni")', |
| 'import("${chip_root}/config/standalone/args.gni")', |
| 'chip_shell_cmd_server = false', |
| 'chip_build_libshell = true', |
| 'chip_config_network_layer_ble = false', |
| (f'target_defines = ["CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID={options.vid}", ' |
| f'"CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID={options.pid}", ' |
| f'"CONFIG_ENABLE_PW_RPC={int(options.do_rpc)}", ' |
| f'"CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_NAME=\\"{str(options.pname)}\\""]'), |
| ]) |
| |
| uname_resp = shell.run_cmd("uname -m", return_cmd_output=True) |
| if "aarch" not in uname_resp and "arm" not in uname_resp: |
| if options.cpu_type == "arm64": |
| if "SYSROOT_AARCH64" not in shell.env: |
| flush_print( |
| "SYSROOT_AARCH64 env variable not set. " |
| "AARCH64 toolchain needed for cross-compiling for arm64.") |
| exit(1) |
| shell.env["PKG_CONFIG_PATH"] = ( |
| f'{shell.env["SYSROOT_AARCH64"]}/lib/aarch64-linux-gnu/pkgconfig') |
| linux_args.append('target_cpu="arm64"') |
| linux_args.append('is_clang=true') |
| linux_args.append('chip_crypto="mbedtls"') |
| linux_args.append( |
| f'sysroot="{shell.env["SYSROOT_AARCH64"]}"') |
| |
| elif options.cpu_type == "arm": |
| if "SYSROOT_ARMHF" not in shell.env: |
| flush_print( |
| "SYSROOT_ARMHF env variable not set. " |
| "ARMHF toolchain needed for cross-compiling for arm.") |
| exit(1) |
| shell.env["PKG_CONFIG_PATH"] = ( |
| f'{shell.env["SYSROOT_ARMHF"]}/lib/arm-linux-gnueabihf/pkgconfig') |
| linux_args.append('target_cpu="arm"') |
| linux_args.append('is_clang=true') |
| linux_args.append('chip_crypto="mbedtls"') |
| linux_args.append( |
| f'sysroot="{shell.env["SYSROOT_ARMHF"]}"') |
| |
| if options.cpu_type == "x64": |
| uname_resp = shell.run_cmd("uname -m", return_cmd_output=True) |
| if "x64" not in uname_resp and "x86_64" not in uname_resp: |
| flush_print( |
| f"Unable to cross compile for x64 on {uname_resp}") |
| exit(1) |
| if options.enable_ipv4: |
| linux_args.append("chip_inet_config_enable_ipv4=true") |
| else: |
| linux_args.append("chip_inet_config_enable_ipv4=false") |
| |
| if sw_ver_string: |
| linux_args.append( |
| f'chip_device_config_device_software_version_string = "{sw_ver_string}"') |
| |
| with open(f"{_CHEF_SCRIPT_PATH}/linux/args.gni", "w") as f: |
| f.write("\n".join(linux_args)) |
| with open(f"{_CHEF_SCRIPT_PATH}/linux/sample.gni", "w") as f: |
| f.write(textwrap.dedent(f"""\ |
| sample_zap_file = "{options.sample_device_type_name}.zap" |
| sample_name = "{options.sample_device_type_name}" |
| """)) |
| if options.do_clean: |
| shell.run_cmd("rm -rf out") |
| shell.run_cmd("gn gen out") |
| shell.run_cmd("ninja -C out") |
| |
| # |
| # Compilation DB TODO |
| # |
| |
| # |
| # Flash |
| # |
| |
| if options.do_flash: |
| flush_print("Flashing target") |
| if options.build_target == "esp32": |
| if config['esp32']['TTY'] is None: |
| flush_print( |
| 'The path for the serial enumeration for esp32 is not set. Make sure esp32.TTY is set on your config.yaml file') |
| exit(1) |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32") |
| if options.do_erase: |
| shell.run_cmd( |
| f"idf.py -p {config['esp32']['TTY']} erase-flash") |
| shell.run_cmd(f"idf.py -p {config['esp32']['TTY']} flash") |
| elif options.build_target == "nrfconnect": |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/nrfconnect") |
| if options.do_erase: |
| shell.run_cmd("west flash --erase") |
| else: |
| shell.run_cmd("west flash") |
| elif (options.build_target == "silabs-thread") or (options.build_target == "silabs-wifi"): |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/efr32") |
| shell.run_cmd( |
| f"python3 out/{options.sample_device_type_name}/{silabs_board}/matter-silabs-chef-example.flash.py") |
| |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}") |
| elif (options.build_target == "ameba"): |
| if config['ameba']['MODEL'] == 'D': |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/ameba") |
| shell.run_cmd( |
| f"cd {config['ameba']['AMEBA_SDK']}/tools/AmebaD/Image_Tool_Linux") |
| shell.run_cmd(( |
| f"{config['ameba']['AMEBA_SDK']}/tools/AmebaD/Image_Tool_Linux/flash.sh " |
| f"{config['ameba']['TTY']} {config['ameba']['AMEBA_SDK']}" |
| f"/project/realtek_amebaD_va0_example/GCC-RELEASE/out" |
| ), raise_on_returncode=False) |
| else: |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/ameba") |
| shell.run_cmd( |
| f"cd {config['ameba']['AMEBA_SDK']}/tools/AmebaZ2/Image_Tool_Linux") |
| shell.run_cmd(( |
| f"{config['ameba']['AMEBA_SDK']}/tools/AmebaZ2/Image_Tool_Linux/flash.sh " |
| f"{config['ameba']['TTY']} {config['ameba']['AMEBA_SDK']}" |
| f"/project/realtek_amebaz2_v0_example/GCC-RELEASE/application_is/Debug/bin" |
| ), raise_on_returncode=False) |
| |
| # |
| # Terminal interaction |
| # |
| |
| if options.do_interact: |
| flush_print("Starting terminal...") |
| if options.build_target == "esp32": |
| if config['esp32']['TTY'] is None: |
| flush_print( |
| 'The path for the serial enumeration for esp32 is not set. ' |
| 'Make sure esp32.TTY is set on your config.yaml file') |
| exit(1) |
| shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32") |
| shell.run_cmd(f"idf.py -p {config['esp32']['TTY']} monitor") |
| elif options.build_target == "nrfconnect": |
| if config['nrfconnect']['TTY'] is None: |
| flush_print( |
| 'The path for the serial enumeration for nordic is not set. ' |
| 'Make sure nrfconnect.TTY is set on your config.yaml file') |
| exit(1) |
| shell.run_cmd("killall screen") |
| shell.run_cmd(f"screen {config['nrfconnect']['TTY']} 115200") |
| elif (options.build_target == "silabs-thread"): |
| if config['silabs-thread']['TTY'] is None: |
| flush_print( |
| 'The path for the serial enumeration for silabs-thread is not set. ' |
| 'Make sure silabs-thread.TTY is set on your config.yaml file') |
| exit(1) |
| |
| shell.run_cmd("killall screen") |
| shell.run_cmd( |
| f"screen {config['silabs-thread']['TTY']} 115200 8-N-1") |
| elif options.build_target == "linux": |
| flush_print( |
| f"{_CHEF_SCRIPT_PATH}/linux/out/{options.sample_device_type_name}") |
| shell.run_cmd( |
| f"{_CHEF_SCRIPT_PATH}/linux/out/{options.sample_device_type_name}") |
| elif options.build_target == "ameba": |
| if config['ameba']['TTY'] is None: |
| flush_print( |
| 'The path for the serial enumeration for ameba is not set. Make sure ameba.TTY is set on your config.yaml file') |
| exit(1) |
| if config['ameba']['MODEL'] == 'D': |
| shell.run_cmd("killall screen") |
| shell.run_cmd(f"screen {config['ameba']['TTY']} 115200") |
| else: |
| flush_print("Ameba Z2 image has not been flashed yet") |
| |
| # |
| # RPC Console |
| # |
| if options.do_rpc_console: |
| if options.build_target == "esp32": |
| shell.run_cmd( |
| f"python3 -m chip_rpc.console --device {config['esp32']['TTY']}") |
| elif (options.build_target == "silabs-thread"): |
| if (sys.platform == "linux") or (sys.platform == "linux2"): |
| if (config['silabs-thread']['TTY'] is None): |
| flush_print( |
| 'The path for the serial enumeration for silabs-thread is not set. ' |
| 'Make sure silabs-thread.TTY is set on your config.yaml file') |
| exit(1) |
| shell.run_cmd( |
| f"python3 -m chip_rpc.console --device {config['silabs-thread']['TTY']} -b 115200") |
| elif sys.platform == "darwin": |
| if (config['silabs-thread']['CU'] is None): |
| flush_print( |
| 'The path for the serial enumeration for silabs-thread is not set. ' |
| 'Make sure silabs-thread.CU is set on your config.yaml file') |
| exit(1) |
| shell.run_cmd( |
| f"python3 -m chip_rpc.console --device {config['silabs-thread']['CU']} -b 115200") |
| |
| flush_print("Done") |
| return 0 |
| |
| |
| if __name__ == '__main__': |
| sys.exit(main()) |
