| |
| /* |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * Provides implementations of the CHIP System Layer platform |
| * time/clock functions that are suitable for use on the Ameba platform. |
| */ |
| /* this file behaves like a config.h, comes first */ |
| #include <platform/internal/CHIPDeviceLayerInternal.h> |
| |
| #include <platform/Ameba/SystemTimeSupport.h> |
| #include <support/logging/CHIPLogging.h> |
| |
| #include "task.h" |
| #include <chip_porting.h> |
| #include <time.h> |
| |
| struct rtkTimeVal |
| { |
| uint32_t tv_sec; /* seconds */ |
| uint32_t tv_usec; /* microseconds */ |
| }; |
| |
| namespace chip { |
| namespace System { |
| namespace Clock { |
| |
| namespace Internal { |
| ClockImpl gClockImpl; |
| } // namespace Internal |
| |
| Microseconds64 ClockImpl::GetMonotonicMicroseconds64(void) |
| { |
| return (Clock::Microseconds64(xTaskGetTickCount()) * configTICK_RATE_HZ); |
| } |
| |
| Milliseconds64 ClockImpl::GetMonotonicMilliseconds64(void) |
| { |
| return (Clock::Milliseconds64(xTaskGetTickCount())); |
| } |
| |
| CHIP_ERROR ClockImpl::GetClock_RealTime(Clock::Microseconds64 & curTime) |
| { |
| // TODO(19081): This platform does not properly error out if wall clock has |
| // not been set. For now, short circuit this. |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| #if 0 |
| time_t seconds; |
| struct rtkTimeVal tv; |
| |
| seconds = matter_rtc_read(); |
| |
| tv.tv_sec = (uint32_t) seconds; |
| tv.tv_usec = 0; |
| |
| if (tv.tv_sec < CHIP_SYSTEM_CONFIG_VALID_REAL_TIME_THRESHOLD) |
| { |
| return CHIP_ERROR_REAL_TIME_NOT_SYNCED; |
| } |
| static_assert(CHIP_SYSTEM_CONFIG_VALID_REAL_TIME_THRESHOLD >= 0, "We might be letting through negative tv_sec values!"); |
| curTime = Microseconds64((static_cast<uint64_t>(tv.tv_sec) * UINT64_C(1000000)) + static_cast<uint64_t>(tv.tv_usec)); |
| |
| return CHIP_NO_ERROR; |
| #endif |
| } |
| |
| CHIP_ERROR ClockImpl::GetClock_RealTimeMS(Milliseconds64 & aCurTime) |
| { |
| Microseconds64 curTimeUs; |
| auto err = GetClock_RealTime(curTimeUs); |
| aCurTime = std::chrono::duration_cast<Milliseconds64>(curTimeUs); |
| return err; |
| } |
| |
| CHIP_ERROR ClockImpl::SetClock_RealTime(Microseconds64 aNewCurTime) |
| { |
| struct rtkTimeVal tv; |
| tv.tv_sec = static_cast<uint32_t>(aNewCurTime.count() / UINT64_C(1000000)); |
| tv.tv_usec = static_cast<uint32_t>(aNewCurTime.count() % UINT64_C(1000000)); |
| matter_rtc_write(tv.tv_sec); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR InitClock_RealTime() |
| { |
| Clock::Microseconds64 curTime = |
| Clock::Microseconds64((static_cast<uint64_t>(CHIP_SYSTEM_CONFIG_VALID_REAL_TIME_THRESHOLD) * UINT64_C(1000000))); |
| // Use CHIP_SYSTEM_CONFIG_VALID_REAL_TIME_THRESHOLD as the initial value of RealTime. |
| // Then the RealTime obtained from GetClock_RealTime will be always valid. |
| // |
| // TODO(19081): This is broken because it causes the platform to report |
| // that it does have wall clock time when it actually doesn't. |
| return System::SystemClock().SetClock_RealTime(curTime); |
| } |
| |
| } // namespace Clock |
| } // namespace System |
| } // namespace chip |