| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 133.1.1. [TC-ACL-1.1] Global attributes |
| |
| PICS: |
| - ACL.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Access Control" |
| endpoint: 0 |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "TH reads ClusterRevision attribute from DUT" |
| PICS: ACL.S.Afffd |
| command: "readAttribute" |
| attribute: "ClusterRevision" |
| response: |
| value: 1 |
| constraints: |
| type: int16u |
| |
| - label: "TH reads FeatureMap attribute from DUT" |
| PICS: ACL.S.Afffc |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| response: |
| value: 0 |
| constraints: |
| type: bitmap32 |
| |
| - label: "TH reads AttributeList attribute from DUT" |
| PICS: ACL.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [0, 2, 3, 4, 65528, 65529, 65530, 65531, 65532, 65533] |
| |
| - label: "TH reads optional attribute (Extension) in AttributeList" |
| PICS: ACL.S.A0001 && ACL.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [1] |
| |
| #List values range check support https://github.com/project-chip/connectedhomeip/issues/26570 |
| - label: |
| "TH reads AttributeList attribute from DUT. 1.The list SHALL NOT |
| contain any additional values in the standard or scoped range: |
| (0x0000_0000 - 0x0000_4FFF) and (0x0000_F000 - 0x0000_FFFE). 2.The |
| list MAY contain values in the Manufacturer Extensible Identifier |
| (MEI) range: (0xXXXX_0000 - 0xXXXX_4FFF), where XXXX is the allowed |
| MEI range (0x0001 - 0xFFF1), these values SHALL be ignored. 3.The list |
| SHALL NOT contain any values in the Test Vendor or invalid range: |
| (0x0000_5000 - 0x0000_EFFF and 0x0000_FFFF), (0xXXXX_5000 - |
| 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the |
| allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool accesscontrol read attribute-list 1 0 |
| |
| Verify Successfully"AttributeList attribute " on the TH1(Chip-tool) Log:. |
| |
| [1655960990.225266][2516:2521] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_001F Attribute 0x0000_FFFB DataVersion: 477297741 |
| [1676270267.634187][20397:20399] CHIP:TOO: AttributeList: 11 entries |
| [1676270267.634206][20397:20399] CHIP:TOO: [1]: 0 |
| [1676270267.634220][20397:20399] CHIP:TOO: [2]: 1 |
| [1676270267.634233][20397:20399] CHIP:TOO: [3]: 2 |
| [1676270267.634245][20397:20399] CHIP:TOO: [4]: 3 |
| [1676270267.634258][20397:20399] CHIP:TOO: [5]: 4 |
| [1676270267.634271][20397:20399] CHIP:TOO: [6]: 65528 |
| [1676270267.634284][20397:20399] CHIP:TOO: [7]: 65529 |
| [1676270267.634296][20397:20399] CHIP:TOO: [8]: 65530 |
| [1676270267.634309][20397:20399] CHIP:TOO: [9]: 65531 |
| [1676270267.634322][20397:20399] CHIP:TOO: [10]: 65532 |
| [1676270267.634334][20397:20399] CHIP:TOO: [11]: 65533 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && ACL.S.Afffb |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "TH reads EventList attribute from DUT" |
| PICS: ACL.S.Afffa |
| command: "readAttribute" |
| attribute: "EventList" |
| response: |
| constraints: |
| type: list |
| contains: [0, 1] |
| |
| - label: |
| "TH reads EventList attribute from DUT. 1.The list SHALL NOT contain |
| any additional values in the standard or scoped range: (0x0000_0000 - |
| 0x0000_00FF). 2.The list MAY contain values in the Manufacturer |
| Extensible Identifier (MEI) range: (0xXXXX_0000 - 0xXXXX_00FF), where |
| XXXX is the allowed MEI range (0x0001 - 0xFFF1), these values SHALL be |
| ignored. 3.The list SHALL NOT contain any values in the Test Vendor or |
| invalid range: (0x0000_0100 - 0x0000_FFFF), (0xXXXX_0100 - |
| 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the |
| allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool accesscontrol read event-list 1 0 |
| |
| Verify " EventList attribute " consists the list of supported events, which for this cluster should containing the following elements: |
| all mandatory events: AccessControlEntryChanged (0), AccessControlExtensionChanged (1) on the TH(Chip-tool) Log: |
| |
| [1676456597.556478][24006:24008] CHIP:DMG: } |
| [1676456597.556640][24006:24008] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_001F Attribute 0x0000_FFFA DataVersion: 3448736795 |
| [1676456597.556677][24006:24008] CHIP:TOO: EventList: 2 entries |
| [1676456597.556687][24006:24008] CHIP:TOO: [1]: 0 |
| [1676456597.556693][24006:24008] CHIP:TOO: [2]: 1 |
| [1676456597.556763][24006:24008] CHIP:EM: <<< [E:51140i S:1376 M:55400435 (Ack:189635613)] (S) Msg TX to 1:0000000000000001 [110F] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| [1676456597.556778][24006:24008] CHIP:IN: (S) Sending msg 55400435 on secure session with LSID: 1376 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && ACL.S.Afffa |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads AcceptedCommandList attribute from DUT. 1. The list MAY |
| contain values in the Manufacturer Extensible Identifier (MEI) range: |
| (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range |
| (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT |
| contain any values in the Test Vendor or invalid range: (0x0000_0100 - |
| 0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - |
| 0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool accesscontrol read accepted-command-list 1 0 |
| |
| Verify Successfully " AcceptedCommandList attribute " on the TH1(Chip-tool) Log: |
| |
| [1656478328.210742][2458:2463] CHIP:DMG: |
| [1656478328.210767][2458:2463] CHIP:DMG: ], |
| [1656478328.210799][2458:2463] CHIP:DMG: |
| [1656478328.210826][2458:2463] CHIP:DMG: SuppressResponse = true, |
| [1656478328.210853][2458:2463] CHIP:DMG: InteractionModelRevision = 1 |
| [1656478328.210877][2458:2463] CHIP:DMG: } |
| [1656478328.211032][2458:2463] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_001F Attribute 0x0000_FFF9 DataVersion: 3457122350 |
| [1656478328.211099][2458:2463] CHIP:TOO: AcceptedCommandList: 0 entries |
| [1656478328.211245][2458:2463] CHIP:EM: Sending Standalone Ack for MessageCounter:163659373 on exchange 15270i |
| [1656478328.211313][2458:2463] CHIP:IN: Prepared secure message 0xffff8a2e3958 to 0x0000000000000001 (1) of type 0x10 and protocolId (0, 0) on exchange 15270i with MessageCounter:229380798. |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && ACL.S.Afff9 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads GeneratedCommandList attribute from DUT. 1.The list MAY |
| contain values in the Manufacturer Extensible Identifier (MEI) range: |
| (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range |
| (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT |
| contain any values in the Test Vendor or invalid range: (0x0000_0100 - |
| 0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - |
| 0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool accesscontrol read generated-command-list 1 0 |
| |
| Verify Successfully" GeneratedCommandList attribute " on the TH1(Chip-tool) Log: |
| |
| [[1656478396.324314][2467:2472] CHIP:DMG: |
| [1656478396.324346][2467:2472] CHIP:DMG: ], |
| [1656478396.324386][2467:2472] CHIP:DMG: |
| [1656478396.324419][2467:2472] CHIP:DMG: SuppressResponse = true, |
| [1656478396.324453][2467:2472] CHIP:DMG: InteractionModelRevision = 1 |
| [1656478396.324484][2467:2472] CHIP:DMG: } |
| [1656478396.324673][2467:2472] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_001F Attribute 0x0000_FFF8 DataVersion: 3457122350 |
| [1656478396.324752][2467:2472] CHIP:TOO: GeneratedCommandList: 0 entries |
| [1656478396.324843][2467:2472] CHIP:EM: Sending Standalone Ack for MessageCounter:73836177 on exchange 65471i |
| [1656478396.324920][2467:2472] CHIP:IN: Prepared secure message 0xffffab7ed958 to 0x0000000000000001 (1) of type 0x10 and protocolId (0, 0) on exchange 65471i with MessageCounter:243106706. |
| [1656478396.324967][2467:2472] CHIP:IN: Sending encrypted msg 0xffffab7ed958 with MessageCounter:243106706 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && ACL.S.Afff8 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |