| /* |
| * |
| * Copyright (c) 2020-2022 Project CHIP Authors |
| * Copyright (c) 2013-2017 Nest Labs, Inc. |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * Implementation of CHIP Device Controller, a common class |
| * that implements discovery, pairing and provisioning of CHIP |
| * devices. |
| * |
| */ |
| |
| // module header, comes first |
| #include <controller/CHIPDeviceController.h> |
| |
| #include <app-common/zap-generated/ids/Attributes.h> |
| #include <app-common/zap-generated/ids/Clusters.h> |
| |
| #include <app/InteractionModelEngine.h> |
| #include <app/OperationalSessionSetup.h> |
| #include <app/server/Dnssd.h> |
| #include <controller/CurrentFabricRemover.h> |
| #include <controller/InvokeInteraction.h> |
| #include <controller/WriteInteraction.h> |
| #include <credentials/CHIPCert.h> |
| #include <credentials/DeviceAttestationCredsProvider.h> |
| #include <crypto/CHIPCryptoPAL.h> |
| #include <lib/core/CHIPCore.h> |
| #include <lib/core/CHIPEncoding.h> |
| #include <lib/core/CHIPSafeCasts.h> |
| #include <lib/core/ErrorStr.h> |
| #include <lib/core/NodeId.h> |
| #include <lib/support/Base64.h> |
| #include <lib/support/CHIPArgParser.hpp> |
| #include <lib/support/CHIPMem.h> |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/PersistentStorageMacros.h> |
| #include <lib/support/SafeInt.h> |
| #include <lib/support/ScopedBuffer.h> |
| #include <lib/support/ThreadOperationalDataset.h> |
| #include <lib/support/TimeUtils.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| #include <messaging/ExchangeContext.h> |
| #include <platform/LockTracker.h> |
| #include <protocols/secure_channel/MessageCounterManager.h> |
| #include <setup_payload/QRCodeSetupPayloadParser.h> |
| #include <tracing/macros.h> |
| #include <tracing/metric_event.h> |
| |
| #if CONFIG_NETWORK_LAYER_BLE |
| #include <ble/Ble.h> |
| #include <transport/raw/BLE.h> |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFIPAF |
| #include <transport/raw/WiFiPAF.h> |
| #endif |
| |
| #include <errno.h> |
| #include <inttypes.h> |
| #include <memory> |
| #include <stdint.h> |
| #include <stdlib.h> |
| #include <string> |
| #include <time.h> |
| |
| using namespace chip::Inet; |
| using namespace chip::System; |
| using namespace chip::Transport; |
| using namespace chip::Credentials; |
| using namespace chip::app::Clusters; |
| using namespace chip::Crypto; |
| using namespace chip::Tracing; |
| |
| namespace chip { |
| namespace Controller { |
| |
| using namespace chip::Encoding; |
| #if CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY |
| using namespace chip::Protocols::UserDirectedCommissioning; |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY |
| |
| DeviceController::DeviceController() |
| { |
| mState = State::NotInitialized; |
| } |
| |
| CHIP_ERROR DeviceController::Init(ControllerInitParams params) |
| { |
| assertChipStackLockedByCurrentThread(); |
| |
| VerifyOrReturnError(mState == State::NotInitialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(params.systemState != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| VerifyOrReturnError(params.systemState->SystemLayer() != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrReturnError(params.systemState->UDPEndPointManager() != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| #if CONFIG_NETWORK_LAYER_BLE |
| VerifyOrReturnError(params.systemState->BleLayer() != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| #endif |
| |
| VerifyOrReturnError(params.systemState->TransportMgr() != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| ReturnErrorOnFailure(mDNSResolver.Init(params.systemState->UDPEndPointManager())); |
| mDNSResolver.SetDiscoveryDelegate(this); |
| RegisterDeviceDiscoveryDelegate(params.deviceDiscoveryDelegate); |
| |
| mVendorId = params.controllerVendorId; |
| if (params.operationalKeypair != nullptr || !params.controllerNOC.empty() || !params.controllerRCAC.empty()) |
| { |
| ReturnErrorOnFailure(InitControllerNOCChain(params)); |
| } |
| else if (params.fabricIndex.HasValue()) |
| { |
| VerifyOrReturnError(params.systemState->Fabrics()->FabricCount() > 0, CHIP_ERROR_INVALID_ARGUMENT); |
| if (params.systemState->Fabrics()->FindFabricWithIndex(params.fabricIndex.Value()) != nullptr) |
| { |
| mFabricIndex = params.fabricIndex.Value(); |
| } |
| else |
| { |
| ChipLogError(Controller, "There is no fabric corresponding to the given fabricIndex"); |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| } |
| |
| mSystemState = params.systemState->Retain(); |
| mState = State::Initialized; |
| |
| mRemoveFromFabricTableOnShutdown = params.removeFromFabricTableOnShutdown; |
| mDeleteFromFabricTableOnShutdown = params.deleteFromFabricTableOnShutdown; |
| |
| if (GetFabricIndex() != kUndefinedFabricIndex) |
| { |
| ChipLogProgress(Controller, |
| "Joined the fabric at index %d. Fabric ID is 0x" ChipLogFormatX64 |
| " (Compressed Fabric ID: " ChipLogFormatX64 ")", |
| GetFabricIndex(), ChipLogValueX64(GetFabricId()), ChipLogValueX64(GetCompressedFabricId())); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceController::InitControllerNOCChain(const ControllerInitParams & params) |
| { |
| FabricInfo newFabric; |
| constexpr uint32_t chipCertAllocatedLen = kMaxCHIPCertLength; |
| chip::Platform::ScopedMemoryBuffer<uint8_t> rcacBuf; |
| chip::Platform::ScopedMemoryBuffer<uint8_t> icacBuf; |
| chip::Platform::ScopedMemoryBuffer<uint8_t> nocBuf; |
| Credentials::P256PublicKeySpan rootPublicKeySpan; |
| FabricId fabricId; |
| NodeId nodeId; |
| bool hasExternallyOwnedKeypair = false; |
| Crypto::P256Keypair * externalOperationalKeypair = nullptr; |
| VendorId newFabricVendorId = params.controllerVendorId; |
| |
| // There are three possibilities here in terms of what happens with our |
| // operational key: |
| // 1) We have an externally owned operational keypair. |
| // 2) We have an operational keypair that the fabric table should clone via |
| // serialize/deserialize. |
| // 3) We have no keypair at all, and the fabric table has been initialized |
| // with a key store. |
| if (params.operationalKeypair != nullptr) |
| { |
| hasExternallyOwnedKeypair = params.hasExternallyOwnedOperationalKeypair; |
| externalOperationalKeypair = params.operationalKeypair; |
| } |
| |
| ReturnErrorCodeIf(!rcacBuf.Alloc(chipCertAllocatedLen), CHIP_ERROR_NO_MEMORY); |
| ReturnErrorCodeIf(!icacBuf.Alloc(chipCertAllocatedLen), CHIP_ERROR_NO_MEMORY); |
| ReturnErrorCodeIf(!nocBuf.Alloc(chipCertAllocatedLen), CHIP_ERROR_NO_MEMORY); |
| |
| MutableByteSpan rcacSpan(rcacBuf.Get(), chipCertAllocatedLen); |
| |
| ReturnErrorOnFailure(ConvertX509CertToChipCert(params.controllerRCAC, rcacSpan)); |
| ReturnErrorOnFailure(Credentials::ExtractPublicKeyFromChipCert(rcacSpan, rootPublicKeySpan)); |
| Crypto::P256PublicKey rootPublicKey{ rootPublicKeySpan }; |
| |
| MutableByteSpan icacSpan; |
| if (params.controllerICAC.empty()) |
| { |
| ChipLogProgress(Controller, "Intermediate CA is not needed"); |
| } |
| else |
| { |
| icacSpan = MutableByteSpan(icacBuf.Get(), chipCertAllocatedLen); |
| ReturnErrorOnFailure(ConvertX509CertToChipCert(params.controllerICAC, icacSpan)); |
| } |
| |
| MutableByteSpan nocSpan = MutableByteSpan(nocBuf.Get(), chipCertAllocatedLen); |
| |
| ReturnErrorOnFailure(ConvertX509CertToChipCert(params.controllerNOC, nocSpan)); |
| ReturnErrorOnFailure(ExtractNodeIdFabricIdFromOpCert(nocSpan, &nodeId, &fabricId)); |
| |
| auto * fabricTable = params.systemState->Fabrics(); |
| const FabricInfo * fabricInfo = nullptr; |
| |
| // |
| // When multiple controllers are permitted on the same fabric, we need to find fabrics with |
| // nodeId as an extra discriminant since we can have multiple FabricInfo objects that all |
| // collide on the same fabric. Not doing so may result in a match with an existing FabricInfo |
| // instance that matches the fabric in the provided NOC but is associated with a different NodeId |
| // that is already in use by another active controller instance. That will effectively cause it |
| // to change its identity inadvertently, which is not acceptable. |
| // |
| // TODO: Figure out how to clean up unreclaimed FabricInfos restored from persistent |
| // storage that are not in use by active DeviceController instances. Also, figure out |
| // how to reclaim FabricInfo slots when a DeviceController instance is deleted. |
| // |
| if (params.permitMultiControllerFabrics) |
| { |
| fabricInfo = fabricTable->FindIdentity(rootPublicKey, fabricId, nodeId); |
| } |
| else |
| { |
| fabricInfo = fabricTable->FindFabric(rootPublicKey, fabricId); |
| } |
| |
| bool fabricFoundInTable = (fabricInfo != nullptr); |
| |
| FabricIndex fabricIndex = fabricFoundInTable ? fabricInfo->GetFabricIndex() : kUndefinedFabricIndex; |
| |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| auto advertiseOperational = |
| params.enableServerInteractions ? FabricTable::AdvertiseIdentity::Yes : FabricTable::AdvertiseIdentity::No; |
| |
| // |
| // We permit colliding fabrics when multiple controllers are present on the same logical fabric |
| // since each controller is associated with a unique FabricInfo 'identity' object and consequently, |
| // a unique FabricIndex. |
| // |
| // This sets a flag that will be cleared automatically when the fabric is committed/reverted later |
| // in this function. |
| // |
| if (params.permitMultiControllerFabrics) |
| { |
| fabricTable->PermitCollidingFabrics(); |
| } |
| |
| // We have 4 cases to handle legacy usage of direct operational key injection |
| if (externalOperationalKeypair) |
| { |
| // Cases 1 and 2: Injected operational keys |
| |
| // CASE 1: Fabric update with injected key |
| if (fabricFoundInTable) |
| { |
| err = fabricTable->UpdatePendingFabricWithProvidedOpKey(fabricIndex, nocSpan, icacSpan, externalOperationalKeypair, |
| hasExternallyOwnedKeypair, advertiseOperational); |
| } |
| else |
| // CASE 2: New fabric with injected key |
| { |
| err = fabricTable->AddNewPendingTrustedRootCert(rcacSpan); |
| if (err == CHIP_NO_ERROR) |
| { |
| err = fabricTable->AddNewPendingFabricWithProvidedOpKey(nocSpan, icacSpan, newFabricVendorId, |
| externalOperationalKeypair, hasExternallyOwnedKeypair, |
| &fabricIndex, advertiseOperational); |
| } |
| } |
| } |
| else |
| { |
| // Cases 3 and 4: OperationalKeystore has the keys |
| |
| // CASE 3: Fabric update with operational keystore |
| if (fabricFoundInTable) |
| { |
| VerifyOrReturnError(fabricTable->HasOperationalKeyForFabric(fabricIndex), CHIP_ERROR_KEY_NOT_FOUND); |
| |
| err = fabricTable->UpdatePendingFabricWithOperationalKeystore(fabricIndex, nocSpan, icacSpan, advertiseOperational); |
| } |
| else |
| // CASE 4: New fabric with operational keystore |
| { |
| err = fabricTable->AddNewPendingTrustedRootCert(rcacSpan); |
| if (err == CHIP_NO_ERROR) |
| { |
| err = fabricTable->AddNewPendingFabricWithOperationalKeystore(nocSpan, icacSpan, newFabricVendorId, &fabricIndex, |
| advertiseOperational); |
| } |
| |
| if (err == CHIP_NO_ERROR) |
| { |
| // Now that we know our planned fabric index, verify that the |
| // keystore has a key for it. |
| if (!fabricTable->HasOperationalKeyForFabric(fabricIndex)) |
| { |
| err = CHIP_ERROR_KEY_NOT_FOUND; |
| } |
| } |
| } |
| } |
| |
| // Commit after setup, error-out on failure. |
| if (err == CHIP_NO_ERROR) |
| { |
| // No need to revert on error: CommitPendingFabricData reverts internally on *any* error. |
| err = fabricTable->CommitPendingFabricData(); |
| } |
| else |
| { |
| fabricTable->RevertPendingFabricData(); |
| } |
| |
| ReturnErrorOnFailure(err); |
| VerifyOrReturnError(fabricIndex != kUndefinedFabricIndex, CHIP_ERROR_INTERNAL); |
| |
| mFabricIndex = fabricIndex; |
| mAdvertiseIdentity = advertiseOperational; |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceController::UpdateControllerNOCChain(const ByteSpan & noc, const ByteSpan & icac, |
| Crypto::P256Keypair * operationalKeypair, |
| bool operationalKeypairExternalOwned) |
| { |
| VerifyOrReturnError(mFabricIndex != kUndefinedFabricIndex, CHIP_ERROR_INTERNAL); |
| VerifyOrReturnError(mSystemState != nullptr, CHIP_ERROR_INTERNAL); |
| FabricTable * fabricTable = mSystemState->Fabrics(); |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| FabricId fabricId; |
| NodeId nodeId; |
| CATValues oldCats; |
| CATValues newCats; |
| ReturnErrorOnFailure(ExtractNodeIdFabricIdFromOpCert(noc, &nodeId, &fabricId)); |
| ReturnErrorOnFailure(fabricTable->FetchCATs(mFabricIndex, oldCats)); |
| ReturnErrorOnFailure(ExtractCATsFromOpCert(noc, newCats)); |
| |
| bool needCloseSession = true; |
| if (GetFabricInfo()->GetNodeId() == nodeId && oldCats == newCats) |
| { |
| needCloseSession = false; |
| } |
| |
| if (operationalKeypair != nullptr) |
| { |
| err = fabricTable->UpdatePendingFabricWithProvidedOpKey(mFabricIndex, noc, icac, operationalKeypair, |
| operationalKeypairExternalOwned, mAdvertiseIdentity); |
| } |
| else |
| { |
| VerifyOrReturnError(fabricTable->HasOperationalKeyForFabric(mFabricIndex), CHIP_ERROR_KEY_NOT_FOUND); |
| err = fabricTable->UpdatePendingFabricWithOperationalKeystore(mFabricIndex, noc, icac, mAdvertiseIdentity); |
| } |
| |
| if (err == CHIP_NO_ERROR) |
| { |
| err = fabricTable->CommitPendingFabricData(); |
| } |
| else |
| { |
| fabricTable->RevertPendingFabricData(); |
| } |
| |
| ReturnErrorOnFailure(err); |
| if (needCloseSession) |
| { |
| // If the node id or CATs have changed, our existing CASE sessions are no longer valid, |
| // because the other side will think anything coming over those sessions comes from our |
| // old node ID, and the new CATs might not satisfy the ACL requirements of the other side. |
| mSystemState->SessionMgr()->ExpireAllSessionsForFabric(mFabricIndex); |
| } |
| ChipLogProgress(Controller, "Controller NOC chain has updated"); |
| return CHIP_NO_ERROR; |
| } |
| |
| void DeviceController::Shutdown() |
| { |
| assertChipStackLockedByCurrentThread(); |
| |
| VerifyOrReturn(mState != State::NotInitialized); |
| |
| // If our state is initialialized it means mSystemState is valid, |
| // and we can use it below before we release our reference to it. |
| ChipLogDetail(Controller, "Shutting down the controller"); |
| mState = State::NotInitialized; |
| |
| if (mFabricIndex != kUndefinedFabricIndex) |
| { |
| // Shut down any subscription clients for this fabric. |
| app::InteractionModelEngine::GetInstance()->ShutdownSubscriptions(mFabricIndex); |
| |
| // Shut down any ongoing CASE session activity we have. We're going to |
| // assume that all sessions for our fabric belong to us here. |
| mSystemState->CASESessionMgr()->ReleaseSessionsForFabric(mFabricIndex); |
| |
| // Shut down any bdx transfers we're acting as the server for. |
| mSystemState->BDXTransferServer()->AbortTransfersForFabric(mFabricIndex); |
| |
| // TODO: The CASE session manager does not shut down existing CASE |
| // sessions. It just shuts down any ongoing CASE session establishment |
| // we're in the middle of as initiator. Maybe it should shut down |
| // existing sessions too? |
| mSystemState->SessionMgr()->ExpireAllSessionsForFabric(mFabricIndex); |
| |
| if (mDeleteFromFabricTableOnShutdown) |
| { |
| mSystemState->Fabrics()->Delete(mFabricIndex); |
| } |
| else if (mRemoveFromFabricTableOnShutdown) |
| { |
| mSystemState->Fabrics()->Forget(mFabricIndex); |
| } |
| } |
| |
| mSystemState->Release(); |
| mSystemState = nullptr; |
| |
| mDNSResolver.Shutdown(); |
| mDeviceDiscoveryDelegate = nullptr; |
| } |
| |
| CHIP_ERROR DeviceController::GetPeerAddressAndPort(NodeId peerId, Inet::IPAddress & addr, uint16_t & port) |
| { |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| Transport::PeerAddress peerAddr; |
| ReturnErrorOnFailure(mSystemState->CASESessionMgr()->GetPeerAddress(GetPeerScopedId(peerId), peerAddr)); |
| addr = peerAddr.GetIPAddress(); |
| port = peerAddr.GetPort(); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceController::GetPeerAddress(NodeId nodeId, Transport::PeerAddress & addr) |
| { |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| ReturnErrorOnFailure(mSystemState->CASESessionMgr()->GetPeerAddress(GetPeerScopedId(nodeId), addr)); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceController::ComputePASEVerifier(uint32_t iterations, uint32_t setupPincode, const ByteSpan & salt, |
| Spake2pVerifier & outVerifier) |
| { |
| ReturnErrorOnFailure(PASESession::GeneratePASEVerifier(outVerifier, iterations, salt, /* useRandomPIN= */ false, setupPincode)); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| ControllerDeviceInitParams DeviceController::GetControllerDeviceInitParams() |
| { |
| return ControllerDeviceInitParams{ |
| .sessionManager = mSystemState->SessionMgr(), |
| .exchangeMgr = mSystemState->ExchangeMgr(), |
| }; |
| } |
| |
| DeviceCommissioner::DeviceCommissioner() : |
| mOnDeviceConnectedCallback(OnDeviceConnectedFn, this), mOnDeviceConnectionFailureCallback(OnDeviceConnectionFailureFn, this), |
| #if CHIP_DEVICE_CONFIG_ENABLE_AUTOMATIC_CASE_RETRIES |
| mOnDeviceConnectionRetryCallback(OnDeviceConnectionRetryFn, this), |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_AUTOMATIC_CASE_RETRIES |
| mDeviceAttestationInformationVerificationCallback(OnDeviceAttestationInformationVerification, this), |
| mDeviceNOCChainCallback(OnDeviceNOCChainGeneration, this), mSetUpCodePairer(this) |
| {} |
| |
| DeviceCommissioner::~DeviceCommissioner() |
| { |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFIPAF |
| DeviceLayer::ConnectivityMgr().WiFiPAFCancelConnect(); |
| #endif |
| } |
| |
| CHIP_ERROR DeviceCommissioner::Init(CommissionerInitParams params) |
| { |
| VerifyOrReturnError(params.operationalCredentialsDelegate != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| mOperationalCredentialsDelegate = params.operationalCredentialsDelegate; |
| ReturnErrorOnFailure(DeviceController::Init(params)); |
| |
| mPairingDelegate = params.pairingDelegate; |
| |
| // Configure device attestation validation |
| mDeviceAttestationVerifier = params.deviceAttestationVerifier; |
| if (mDeviceAttestationVerifier == nullptr) |
| { |
| mDeviceAttestationVerifier = Credentials::GetDeviceAttestationVerifier(); |
| if (mDeviceAttestationVerifier == nullptr) |
| { |
| ChipLogError(Controller, |
| "Missing DeviceAttestationVerifier configuration at DeviceCommissioner init and none set with " |
| "Credentials::SetDeviceAttestationVerifier()!"); |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| |
| // We fell back on a default from singleton accessor. |
| ChipLogProgress(Controller, |
| "*** Missing DeviceAttestationVerifier configuration at DeviceCommissioner init: using global default, " |
| "consider passing one in CommissionerInitParams."); |
| } |
| |
| if (params.defaultCommissioner != nullptr) |
| { |
| mDefaultCommissioner = params.defaultCommissioner; |
| } |
| else |
| { |
| mDefaultCommissioner = &mAutoCommissioner; |
| } |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY // make this commissioner discoverable |
| mUdcTransportMgr = chip::Platform::New<UdcTransportMgr>(); |
| ReturnErrorOnFailure(mUdcTransportMgr->Init(Transport::UdpListenParameters(mSystemState->UDPEndPointManager()) |
| .SetAddressType(Inet::IPAddressType::kIPv6) |
| .SetListenPort(static_cast<uint16_t>(mUdcListenPort)) |
| #if INET_CONFIG_ENABLE_IPV4 |
| , |
| Transport::UdpListenParameters(mSystemState->UDPEndPointManager()) |
| .SetAddressType(Inet::IPAddressType::kIPv4) |
| .SetListenPort(static_cast<uint16_t>(mUdcListenPort)) |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| )); |
| |
| mUdcServer = chip::Platform::New<UserDirectedCommissioningServer>(); |
| mUdcTransportMgr->SetSessionManager(mUdcServer); |
| mUdcServer->SetTransportManager(mUdcTransportMgr); |
| |
| mUdcServer->SetInstanceNameResolver(this); |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY |
| |
| mSetUpCodePairer.SetSystemLayer(mSystemState->SystemLayer()); |
| #if CONFIG_NETWORK_LAYER_BLE |
| mSetUpCodePairer.SetBleLayer(mSystemState->BleLayer()); |
| #endif // CONFIG_NETWORK_LAYER_BLE |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void DeviceCommissioner::Shutdown() |
| { |
| VerifyOrReturn(mState != State::NotInitialized); |
| |
| ChipLogDetail(Controller, "Shutting down the commissioner"); |
| |
| mSetUpCodePairer.StopPairing(); |
| |
| // Check to see if pairing in progress before shutting down |
| CommissioneeDeviceProxy * device = mDeviceInPASEEstablishment; |
| if (device != nullptr && device->IsSessionSetupInProgress()) |
| { |
| ChipLogDetail(Controller, "Setup in progress, stopping setup before shutting down"); |
| OnSessionEstablishmentError(CHIP_ERROR_CONNECTION_ABORTED); |
| } |
| |
| CancelCommissioningInteractions(); |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY // make this commissioner discoverable |
| if (mUdcTransportMgr != nullptr) |
| { |
| chip::Platform::Delete(mUdcTransportMgr); |
| mUdcTransportMgr = nullptr; |
| } |
| if (mUdcServer != nullptr) |
| { |
| mUdcServer->SetInstanceNameResolver(nullptr); |
| chip::Platform::Delete(mUdcServer); |
| mUdcServer = nullptr; |
| } |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY |
| |
| // Release everything from the commissionee device pool here. |
| // Make sure to use ReleaseCommissioneeDevice so we don't keep dangling |
| // pointers to the device objects. |
| mCommissioneeDevicePool.ForEachActiveObject([this](auto * commissioneeDevice) { |
| ReleaseCommissioneeDevice(commissioneeDevice); |
| return Loop::Continue; |
| }); |
| |
| DeviceController::Shutdown(); |
| } |
| |
| CommissioneeDeviceProxy * DeviceCommissioner::FindCommissioneeDevice(NodeId id) |
| { |
| MATTER_TRACE_SCOPE("FindCommissioneeDevice", "DeviceCommissioner"); |
| CommissioneeDeviceProxy * foundDevice = nullptr; |
| mCommissioneeDevicePool.ForEachActiveObject([&](auto * deviceProxy) { |
| if (deviceProxy->GetDeviceId() == id) |
| { |
| foundDevice = deviceProxy; |
| return Loop::Break; |
| } |
| return Loop::Continue; |
| }); |
| |
| return foundDevice; |
| } |
| |
| CommissioneeDeviceProxy * DeviceCommissioner::FindCommissioneeDevice(const Transport::PeerAddress & peerAddress) |
| { |
| CommissioneeDeviceProxy * foundDevice = nullptr; |
| mCommissioneeDevicePool.ForEachActiveObject([&](auto * deviceProxy) { |
| if (deviceProxy->GetPeerAddress() == peerAddress) |
| { |
| foundDevice = deviceProxy; |
| return Loop::Break; |
| } |
| return Loop::Continue; |
| }); |
| |
| return foundDevice; |
| } |
| |
| void DeviceCommissioner::ReleaseCommissioneeDevice(CommissioneeDeviceProxy * device) |
| { |
| #if CONFIG_NETWORK_LAYER_BLE |
| if (mSystemState->BleLayer() != nullptr && device->GetDeviceTransportType() == Transport::Type::kBle) |
| { |
| // We only support one BLE connection, so if this is BLE, close it |
| ChipLogProgress(Discovery, "Closing all BLE connections"); |
| mSystemState->BleLayer()->CloseAllBleConnections(); |
| } |
| #endif |
| // Make sure that there will be no dangling pointer |
| if (mDeviceInPASEEstablishment == device) |
| { |
| mDeviceInPASEEstablishment = nullptr; |
| } |
| if (mDeviceBeingCommissioned == device) |
| { |
| mDeviceBeingCommissioned = nullptr; |
| } |
| |
| // Release the commissionee device after we have nulled out our pointers, |
| // because that can call back in to us with error notifications as the |
| // session is released. |
| mCommissioneeDevicePool.ReleaseObject(device); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::GetDeviceBeingCommissioned(NodeId deviceId, CommissioneeDeviceProxy ** out_device) |
| { |
| VerifyOrReturnError(out_device != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| CommissioneeDeviceProxy * device = FindCommissioneeDevice(deviceId); |
| |
| VerifyOrReturnError(device != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| *out_device = device; |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::PairDevice(NodeId remoteDeviceId, const char * setUpCode, const CommissioningParameters & params, |
| DiscoveryType discoveryType, Optional<Dnssd::CommonResolutionData> resolutionData) |
| { |
| MATTER_TRACE_SCOPE("PairDevice", "DeviceCommissioner"); |
| |
| if (mDefaultCommissioner == nullptr) |
| { |
| ChipLogError(Controller, "No default commissioner is specified"); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| ReturnErrorOnFailure(mDefaultCommissioner->SetCommissioningParameters(params)); |
| |
| return mSetUpCodePairer.PairDevice(remoteDeviceId, setUpCode, SetupCodePairerBehaviour::kCommission, discoveryType, |
| resolutionData); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::PairDevice(NodeId remoteDeviceId, const char * setUpCode, DiscoveryType discoveryType, |
| Optional<Dnssd::CommonResolutionData> resolutionData) |
| { |
| MATTER_TRACE_SCOPE("PairDevice", "DeviceCommissioner"); |
| return mSetUpCodePairer.PairDevice(remoteDeviceId, setUpCode, SetupCodePairerBehaviour::kCommission, discoveryType, |
| resolutionData); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::PairDevice(NodeId remoteDeviceId, RendezvousParameters & params) |
| { |
| MATTER_TRACE_SCOPE("PairDevice", "DeviceCommissioner"); |
| ReturnErrorOnFailureWithMetric(kMetricDeviceCommissionerCommission, EstablishPASEConnection(remoteDeviceId, params)); |
| auto errorCode = Commission(remoteDeviceId); |
| VerifyOrDoWithMetric(kMetricDeviceCommissionerCommission, CHIP_NO_ERROR == errorCode, errorCode); |
| return errorCode; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::PairDevice(NodeId remoteDeviceId, RendezvousParameters & rendezvousParams, |
| CommissioningParameters & commissioningParams) |
| { |
| MATTER_TRACE_SCOPE("PairDevice", "DeviceCommissioner"); |
| ReturnErrorOnFailureWithMetric(kMetricDeviceCommissionerCommission, EstablishPASEConnection(remoteDeviceId, rendezvousParams)); |
| auto errorCode = Commission(remoteDeviceId, commissioningParams); |
| VerifyOrDoWithMetric(kMetricDeviceCommissionerCommission, CHIP_NO_ERROR == errorCode, errorCode); |
| return errorCode; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::EstablishPASEConnection(NodeId remoteDeviceId, const char * setUpCode, DiscoveryType discoveryType, |
| Optional<Dnssd::CommonResolutionData> resolutionData) |
| { |
| MATTER_TRACE_SCOPE("EstablishPASEConnection", "DeviceCommissioner"); |
| return mSetUpCodePairer.PairDevice(remoteDeviceId, setUpCode, SetupCodePairerBehaviour::kPaseOnly, discoveryType, |
| resolutionData); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::EstablishPASEConnection(NodeId remoteDeviceId, RendezvousParameters & params) |
| { |
| MATTER_TRACE_SCOPE("EstablishPASEConnection", "DeviceCommissioner"); |
| MATTER_LOG_METRIC_BEGIN(kMetricDeviceCommissionerPASESession); |
| |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| CommissioneeDeviceProxy * device = nullptr; |
| CommissioneeDeviceProxy * current = nullptr; |
| Transport::PeerAddress peerAddress = Transport::PeerAddress::UDP(Inet::IPAddress::Any); |
| |
| Messaging::ExchangeContext * exchangeCtxt = nullptr; |
| Optional<SessionHandle> session; |
| |
| VerifyOrExit(mState == State::Initialized, err = CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrExit(mDeviceInPASEEstablishment == nullptr, err = CHIP_ERROR_INCORRECT_STATE); |
| |
| // TODO(#13940): We need to specify the peer address for BLE transport in bindings. |
| if (params.GetPeerAddress().GetTransportType() == Transport::Type::kBle || |
| params.GetPeerAddress().GetTransportType() == Transport::Type::kUndefined) |
| { |
| #if CONFIG_NETWORK_LAYER_BLE |
| #if CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| ConnectBleTransportToSelf(); |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| if (!params.HasBleLayer()) |
| { |
| params.SetPeerAddress(Transport::PeerAddress::BLE()); |
| } |
| peerAddress = Transport::PeerAddress::BLE(); |
| #endif // CONFIG_NETWORK_LAYER_BLE |
| } |
| else if (params.GetPeerAddress().GetTransportType() == Transport::Type::kTcp || |
| params.GetPeerAddress().GetTransportType() == Transport::Type::kUdp) |
| { |
| peerAddress = Transport::PeerAddress::UDP(params.GetPeerAddress().GetIPAddress(), params.GetPeerAddress().GetPort(), |
| params.GetPeerAddress().GetInterface()); |
| } |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFIPAF |
| else if (params.GetPeerAddress().GetTransportType() == Transport::Type::kWiFiPAF) |
| { |
| peerAddress = Transport::PeerAddress::WiFiPAF(remoteDeviceId); |
| } |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_WIFIPAF |
| |
| current = FindCommissioneeDevice(peerAddress); |
| if (current != nullptr) |
| { |
| if (current->GetDeviceId() == remoteDeviceId) |
| { |
| // We might be able to just reuse its connection if it has one or is |
| // working on one. |
| if (current->IsSecureConnected()) |
| { |
| if (mPairingDelegate) |
| { |
| // We already have an open secure session to this device, call the callback immediately and early return. |
| mPairingDelegate->OnPairingComplete(CHIP_NO_ERROR); |
| } |
| MATTER_LOG_METRIC_END(kMetricDeviceCommissionerPASESession, CHIP_NO_ERROR); |
| return CHIP_NO_ERROR; |
| } |
| if (current->IsSessionSetupInProgress()) |
| { |
| // We're not connected yet, but we're in the process of connecting. Pairing delegate will get a callback when |
| // connection completes |
| return CHIP_NO_ERROR; |
| } |
| } |
| |
| // Either the consumer wants to assign a different device id to this |
| // peer address now (so we can't reuse the commissionee device we have |
| // already) or something has gone strange. Delete the old device, try |
| // again. |
| ChipLogError(Controller, "Found unconnected device, removing"); |
| ReleaseCommissioneeDevice(current); |
| } |
| |
| device = mCommissioneeDevicePool.CreateObject(); |
| VerifyOrExit(device != nullptr, err = CHIP_ERROR_NO_MEMORY); |
| |
| mDeviceInPASEEstablishment = device; |
| device->Init(GetControllerDeviceInitParams(), remoteDeviceId, peerAddress); |
| device->UpdateDeviceData(params.GetPeerAddress(), params.GetMRPConfig()); |
| |
| #if CONFIG_NETWORK_LAYER_BLE |
| if (params.GetPeerAddress().GetTransportType() == Transport::Type::kBle) |
| { |
| if (params.HasConnectionObject()) |
| { |
| SuccessOrExit(err = mSystemState->BleLayer()->NewBleConnectionByObject(params.GetConnectionObject())); |
| } |
| else if (params.HasDiscoveredObject()) |
| { |
| // The RendezvousParameters argument needs to be recovered if the search succeed, so save them |
| // for later. |
| mRendezvousParametersForDeviceDiscoveredOverBle = params; |
| SuccessOrExit(err = mSystemState->BleLayer()->NewBleConnectionByObject(params.GetDiscoveredObject(), this, |
| OnDiscoveredDeviceOverBleSuccess, |
| OnDiscoveredDeviceOverBleError)); |
| ExitNow(CHIP_NO_ERROR); |
| } |
| else if (params.HasDiscriminator()) |
| { |
| // The RendezvousParameters argument needs to be recovered if the search succeed, so save them |
| // for later. |
| mRendezvousParametersForDeviceDiscoveredOverBle = params; |
| |
| SuccessOrExit(err = mSystemState->BleLayer()->NewBleConnectionByDiscriminator(params.GetSetupDiscriminator().value(), |
| this, OnDiscoveredDeviceOverBleSuccess, |
| OnDiscoveredDeviceOverBleError)); |
| ExitNow(CHIP_NO_ERROR); |
| } |
| else |
| { |
| ExitNow(err = CHIP_ERROR_INVALID_ARGUMENT); |
| } |
| } |
| #endif |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFIPAF |
| if (params.GetPeerAddress().GetTransportType() == Transport::Type::kWiFiPAF) |
| { |
| if (DeviceLayer::ConnectivityMgr().GetWiFiPAF()->GetWiFiPAFState() != Transport::WiFiPAFBase::State::kConnected) |
| { |
| ChipLogProgress(Controller, "WiFi-PAF: Subscribing the NAN-USD devices"); |
| if (!DeviceLayer::ConnectivityMgrImpl().IsWiFiManagementStarted()) |
| { |
| ChipLogError(Controller, "Wi-Fi Management should have be started now."); |
| ExitNow(CHIP_ERROR_INTERNAL); |
| } |
| mRendezvousParametersForDeviceDiscoveredOverWiFiPAF = params; |
| DeviceLayer::ConnectivityMgr().WiFiPAFConnect(params.GetSetupDiscriminator().value(), (void *) this, |
| OnWiFiPAFSubscribeComplete, OnWiFiPAFSubscribeError); |
| ExitNow(CHIP_NO_ERROR); |
| } |
| } |
| #endif |
| session = mSystemState->SessionMgr()->CreateUnauthenticatedSession(params.GetPeerAddress(), params.GetMRPConfig()); |
| VerifyOrExit(session.HasValue(), err = CHIP_ERROR_NO_MEMORY); |
| |
| // Allocate the exchange immediately before calling PASESession::Pair. |
| // |
| // PASESession::Pair takes ownership of the exchange and will free it on |
| // error, but can only do this if it is actually called. Allocating the |
| // exchange context right before calling Pair ensures that if allocation |
| // succeeds, PASESession has taken ownership. |
| exchangeCtxt = mSystemState->ExchangeMgr()->NewContext(session.Value(), &device->GetPairing()); |
| VerifyOrExit(exchangeCtxt != nullptr, err = CHIP_ERROR_INTERNAL); |
| |
| err = device->GetPairing().Pair(*mSystemState->SessionMgr(), params.GetSetupPINCode(), GetLocalMRPConfig(), exchangeCtxt, this); |
| SuccessOrExit(err); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| if (device != nullptr) |
| { |
| ReleaseCommissioneeDevice(device); |
| } |
| MATTER_LOG_METRIC_END(kMetricDeviceCommissionerPASESession, err); |
| } |
| |
| return err; |
| } |
| |
| #if CONFIG_NETWORK_LAYER_BLE |
| void DeviceCommissioner::OnDiscoveredDeviceOverBleSuccess(void * appState, BLE_CONNECTION_OBJECT connObj) |
| { |
| auto self = static_cast<DeviceCommissioner *>(appState); |
| auto device = self->mDeviceInPASEEstablishment; |
| |
| if (nullptr != device && device->GetDeviceTransportType() == Transport::Type::kBle) |
| { |
| auto remoteId = device->GetDeviceId(); |
| |
| auto params = self->mRendezvousParametersForDeviceDiscoveredOverBle; |
| params.SetConnectionObject(connObj); |
| self->mRendezvousParametersForDeviceDiscoveredOverBle = RendezvousParameters(); |
| |
| self->ReleaseCommissioneeDevice(device); |
| LogErrorOnFailure(self->EstablishPASEConnection(remoteId, params)); |
| } |
| } |
| |
| void DeviceCommissioner::OnDiscoveredDeviceOverBleError(void * appState, CHIP_ERROR err) |
| { |
| auto self = static_cast<DeviceCommissioner *>(appState); |
| auto device = self->mDeviceInPASEEstablishment; |
| |
| if (nullptr != device && device->GetDeviceTransportType() == Transport::Type::kBle) |
| { |
| self->ReleaseCommissioneeDevice(device); |
| self->mRendezvousParametersForDeviceDiscoveredOverBle = RendezvousParameters(); |
| |
| // Callback is required when BLE discovery fails, otherwise the caller will always be in a suspended state |
| // A better way to handle it should define a new error code |
| if (self->mPairingDelegate != nullptr) |
| { |
| self->mPairingDelegate->OnPairingComplete(err); |
| } |
| } |
| } |
| #endif // CONFIG_NETWORK_LAYER_BLE |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_WIFIPAF |
| void DeviceCommissioner::OnWiFiPAFSubscribeComplete(void * appState) |
| { |
| auto self = (DeviceCommissioner *) appState; |
| auto device = self->mDeviceInPASEEstablishment; |
| |
| if (nullptr != device && device->GetDeviceTransportType() == Transport::Type::kWiFiPAF) |
| { |
| ChipLogProgress(Controller, "WiFi-PAF: Subscription Completed, dev_id = %lu", device->GetDeviceId()); |
| auto remoteId = device->GetDeviceId(); |
| auto params = self->mRendezvousParametersForDeviceDiscoveredOverWiFiPAF; |
| |
| self->mRendezvousParametersForDeviceDiscoveredOverWiFiPAF = RendezvousParameters(); |
| self->ReleaseCommissioneeDevice(device); |
| LogErrorOnFailure(self->EstablishPASEConnection(remoteId, params)); |
| } |
| } |
| |
| void DeviceCommissioner::OnWiFiPAFSubscribeError(void * appState, CHIP_ERROR err) |
| { |
| auto self = (DeviceCommissioner *) appState; |
| auto device = self->mDeviceInPASEEstablishment; |
| |
| if (nullptr != device && device->GetDeviceTransportType() == Transport::Type::kWiFiPAF) |
| { |
| ChipLogError(Controller, "WiFi-PAF: Subscription Error, id = %lu, err = %" CHIP_ERROR_FORMAT, device->GetDeviceId(), |
| err.Format()); |
| self->ReleaseCommissioneeDevice(device); |
| self->mRendezvousParametersForDeviceDiscoveredOverWiFiPAF = RendezvousParameters(); |
| if (self->mPairingDelegate != nullptr) |
| { |
| self->mPairingDelegate->OnPairingComplete(err); |
| } |
| } |
| } |
| #endif |
| |
| CHIP_ERROR DeviceCommissioner::Commission(NodeId remoteDeviceId, CommissioningParameters & params) |
| { |
| if (mDefaultCommissioner == nullptr) |
| { |
| ChipLogError(Controller, "No default commissioner is specified"); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| ReturnErrorOnFailureWithMetric(kMetricDeviceCommissionerCommission, mDefaultCommissioner->SetCommissioningParameters(params)); |
| auto errorCode = Commission(remoteDeviceId); |
| VerifyOrDoWithMetric(kMetricDeviceCommissionerCommission, CHIP_NO_ERROR == errorCode, errorCode); |
| return errorCode; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::Commission(NodeId remoteDeviceId) |
| { |
| MATTER_TRACE_SCOPE("Commission", "DeviceCommissioner"); |
| |
| if (mDefaultCommissioner == nullptr) |
| { |
| ChipLogError(Controller, "No default commissioner is specified"); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| CommissioneeDeviceProxy * device = FindCommissioneeDevice(remoteDeviceId); |
| if (device == nullptr || (!device->IsSecureConnected() && !device->IsSessionSetupInProgress())) |
| { |
| ChipLogError(Controller, "Invalid device for commissioning " ChipLogFormatX64, ChipLogValueX64(remoteDeviceId)); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| if (!device->IsSecureConnected() && device != mDeviceInPASEEstablishment) |
| { |
| // We should not end up in this state because we won't attempt to establish more than one connection at a time. |
| ChipLogError(Controller, "Device is not connected and not being paired " ChipLogFormatX64, ChipLogValueX64(remoteDeviceId)); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| if (mCommissioningStage != CommissioningStage::kSecurePairing) |
| { |
| ChipLogError(Controller, "Commissioning already in progress (stage '%s') - not restarting", |
| StageToString(mCommissioningStage)); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| ChipLogProgress(Controller, "Commission called for node ID 0x" ChipLogFormatX64, ChipLogValueX64(remoteDeviceId)); |
| |
| mDefaultCommissioner->SetOperationalCredentialsDelegate(mOperationalCredentialsDelegate); |
| if (device->IsSecureConnected()) |
| { |
| MATTER_LOG_METRIC_BEGIN(kMetricDeviceCommissionerCommission); |
| mDefaultCommissioner->StartCommissioning(this, device); |
| } |
| else |
| { |
| mRunCommissioningAfterConnection = true; |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR |
| DeviceCommissioner::ContinueCommissioningAfterDeviceAttestation(DeviceProxy * device, |
| Credentials::AttestationVerificationResult attestationResult) |
| { |
| MATTER_TRACE_SCOPE("continueCommissioningDevice", "DeviceCommissioner"); |
| |
| if (mDefaultCommissioner == nullptr) |
| { |
| ChipLogError(Controller, "No default commissioner is specified"); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| if (device == nullptr || device != mDeviceBeingCommissioned) |
| { |
| ChipLogError(Controller, "Invalid device for commissioning %p", device); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| CommissioneeDeviceProxy * commissioneeDevice = FindCommissioneeDevice(device->GetDeviceId()); |
| if (commissioneeDevice == nullptr) |
| { |
| ChipLogError(Controller, "Couldn't find commissionee device"); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| if (!commissioneeDevice->IsSecureConnected() || commissioneeDevice != mDeviceBeingCommissioned) |
| { |
| ChipLogError(Controller, "Invalid device for commissioning after attestation failure: 0x" ChipLogFormatX64, |
| ChipLogValueX64(commissioneeDevice->GetDeviceId())); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| if (mCommissioningStage != CommissioningStage::kAttestationRevocationCheck) |
| { |
| ChipLogError(Controller, "Commissioning is not attestation verification phase"); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| ChipLogProgress(Controller, "Continuing commissioning after attestation failure for device ID 0x" ChipLogFormatX64, |
| ChipLogValueX64(commissioneeDevice->GetDeviceId())); |
| |
| if (attestationResult != AttestationVerificationResult::kSuccess) |
| { |
| ChipLogError(Controller, "Client selected error: %u for failed 'Attestation Information' for device", |
| to_underlying(attestationResult)); |
| |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<AttestationErrorInfo>(attestationResult); |
| CommissioningStageComplete(CHIP_ERROR_INTERNAL, report); |
| } |
| else |
| { |
| ChipLogProgress(Controller, "Overriding attestation failure per client and continuing commissioning"); |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::StopPairing(NodeId remoteDeviceId) |
| { |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(remoteDeviceId != kUndefinedNodeId, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| ChipLogProgress(Controller, "StopPairing called for node ID 0x" ChipLogFormatX64, ChipLogValueX64(remoteDeviceId)); |
| |
| // If we're still in the process of discovering the device, just stop the SetUpCodePairer |
| if (mSetUpCodePairer.StopPairing(remoteDeviceId)) |
| { |
| mRunCommissioningAfterConnection = false; |
| return CHIP_NO_ERROR; |
| } |
| |
| // Otherwise we might be pairing and / or commissioning it. |
| CommissioneeDeviceProxy * device = FindCommissioneeDevice(remoteDeviceId); |
| VerifyOrReturnError(device != nullptr, CHIP_ERROR_INVALID_DEVICE_DESCRIPTOR); |
| |
| if (mDeviceBeingCommissioned == device) |
| { |
| CancelCommissioningInteractions(); |
| CommissioningStageComplete(CHIP_ERROR_CANCELLED); |
| } |
| else |
| { |
| ReleaseCommissioneeDevice(device); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| void DeviceCommissioner::CancelCommissioningInteractions() |
| { |
| if (mReadClient) |
| { |
| ChipLogDetail(Controller, "Cancelling read request for step '%s'", StageToString(mCommissioningStage)); |
| mReadClient.reset(); // destructor cancels |
| } |
| if (mInvokeCancelFn) |
| { |
| ChipLogDetail(Controller, "Cancelling command invocation for step '%s'", StageToString(mCommissioningStage)); |
| mInvokeCancelFn(); |
| mInvokeCancelFn = nullptr; |
| } |
| if (mWriteCancelFn) |
| { |
| ChipLogDetail(Controller, "Cancelling write request for step '%s'", StageToString(mCommissioningStage)); |
| mWriteCancelFn(); |
| mWriteCancelFn = nullptr; |
| } |
| if (mOnDeviceConnectedCallback.IsRegistered()) |
| { |
| ChipLogDetail(Controller, "Cancelling CASE setup for step '%s'", StageToString(mCommissioningStage)); |
| CancelCASECallbacks(); |
| } |
| } |
| |
| void DeviceCommissioner::CancelCASECallbacks() |
| { |
| mOnDeviceConnectedCallback.Cancel(); |
| mOnDeviceConnectionFailureCallback.Cancel(); |
| #if CHIP_DEVICE_CONFIG_ENABLE_AUTOMATIC_CASE_RETRIES |
| mOnDeviceConnectionRetryCallback.Cancel(); |
| #endif |
| } |
| |
| CHIP_ERROR DeviceCommissioner::UnpairDevice(NodeId remoteDeviceId) |
| { |
| MATTER_TRACE_SCOPE("UnpairDevice", "DeviceCommissioner"); |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| |
| return AutoCurrentFabricRemover::RemoveCurrentFabric(this, remoteDeviceId); |
| } |
| |
| void DeviceCommissioner::RendezvousCleanup(CHIP_ERROR status) |
| { |
| if (mDeviceInPASEEstablishment != nullptr) |
| { |
| // Release the commissionee device. For BLE, this is stored, |
| // for IP commissioning, we have taken a reference to the |
| // operational node to send the completion command. |
| ReleaseCommissioneeDevice(mDeviceInPASEEstablishment); |
| |
| if (mPairingDelegate != nullptr) |
| { |
| mPairingDelegate->OnPairingComplete(status); |
| } |
| } |
| } |
| |
| void DeviceCommissioner::OnSessionEstablishmentError(CHIP_ERROR err) |
| { |
| MATTER_LOG_METRIC_END(kMetricDeviceCommissionerPASESession, err); |
| |
| if (mPairingDelegate != nullptr) |
| { |
| mPairingDelegate->OnStatusUpdate(DevicePairingDelegate::SecurePairingFailed); |
| } |
| |
| RendezvousCleanup(err); |
| } |
| |
| void DeviceCommissioner::OnSessionEstablished(const SessionHandle & session) |
| { |
| // PASE session established. |
| CommissioneeDeviceProxy * device = mDeviceInPASEEstablishment; |
| |
| // We are in the callback for this pairing. Reset so we can pair another device. |
| mDeviceInPASEEstablishment = nullptr; |
| |
| VerifyOrReturn(device != nullptr, OnSessionEstablishmentError(CHIP_ERROR_INVALID_DEVICE_DESCRIPTOR)); |
| |
| CHIP_ERROR err = device->SetConnected(session); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Failed in setting up secure channel: err %s", ErrorStr(err)); |
| OnSessionEstablishmentError(err); |
| return; |
| } |
| |
| ChipLogDetail(Controller, "Remote device completed SPAKE2+ handshake"); |
| |
| MATTER_LOG_METRIC_END(kMetricDeviceCommissionerPASESession, CHIP_NO_ERROR); |
| if (mPairingDelegate != nullptr) |
| { |
| mPairingDelegate->OnPairingComplete(CHIP_NO_ERROR); |
| } |
| |
| if (mRunCommissioningAfterConnection) |
| { |
| mRunCommissioningAfterConnection = false; |
| MATTER_LOG_METRIC_BEGIN(kMetricDeviceCommissionerCommission); |
| mDefaultCommissioner->StartCommissioning(this, device); |
| } |
| } |
| |
| CHIP_ERROR DeviceCommissioner::SendCertificateChainRequestCommand(DeviceProxy * device, |
| Credentials::CertificateType certificateType, |
| Optional<System::Clock::Timeout> timeout) |
| { |
| MATTER_TRACE_SCOPE("SendCertificateChainRequestCommand", "DeviceCommissioner"); |
| ChipLogDetail(Controller, "Sending Certificate Chain request to %p device", device); |
| VerifyOrReturnError(device != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| OperationalCredentials::Commands::CertificateChainRequest::Type request; |
| request.certificateType = static_cast<OperationalCredentials::CertificateChainTypeEnum>(certificateType); |
| return SendCommissioningCommand(device, request, OnCertificateChainResponse, OnCertificateChainFailureResponse, kRootEndpointId, |
| timeout); |
| } |
| |
| void DeviceCommissioner::OnCertificateChainFailureResponse(void * context, CHIP_ERROR error) |
| { |
| MATTER_TRACE_SCOPE("OnCertificateChainFailureResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Device failed to receive the Certificate Chain request Response: %s", chip::ErrorStr(error)); |
| DeviceCommissioner * commissioner = reinterpret_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(error); |
| } |
| |
| void DeviceCommissioner::OnCertificateChainResponse( |
| void * context, const chip::app::Clusters::OperationalCredentials::Commands::CertificateChainResponse::DecodableType & response) |
| { |
| MATTER_TRACE_SCOPE("OnCertificateChainResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Received certificate chain from the device"); |
| DeviceCommissioner * commissioner = reinterpret_cast<DeviceCommissioner *>(context); |
| |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<RequestedCertificate>(RequestedCertificate(response.certificate)); |
| |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR, report); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::SendAttestationRequestCommand(DeviceProxy * device, const ByteSpan & attestationNonce, |
| Optional<System::Clock::Timeout> timeout) |
| { |
| MATTER_TRACE_SCOPE("SendAttestationRequestCommand", "DeviceCommissioner"); |
| ChipLogDetail(Controller, "Sending Attestation request to %p device", device); |
| VerifyOrReturnError(device != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| OperationalCredentials::Commands::AttestationRequest::Type request; |
| request.attestationNonce = attestationNonce; |
| |
| ReturnErrorOnFailure( |
| SendCommissioningCommand(device, request, OnAttestationResponse, OnAttestationFailureResponse, kRootEndpointId, timeout)); |
| ChipLogDetail(Controller, "Sent Attestation request, waiting for the Attestation Information"); |
| return CHIP_NO_ERROR; |
| } |
| |
| void DeviceCommissioner::OnAttestationFailureResponse(void * context, CHIP_ERROR error) |
| { |
| MATTER_TRACE_SCOPE("OnAttestationFailureResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Device failed to receive the Attestation Information Response: %s", chip::ErrorStr(error)); |
| DeviceCommissioner * commissioner = reinterpret_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(error); |
| } |
| |
| void DeviceCommissioner::OnAttestationResponse(void * context, |
| const OperationalCredentials::Commands::AttestationResponse::DecodableType & data) |
| { |
| MATTER_TRACE_SCOPE("OnAttestationResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Received Attestation Information from the device"); |
| DeviceCommissioner * commissioner = reinterpret_cast<DeviceCommissioner *>(context); |
| |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<AttestationResponse>(AttestationResponse(data.attestationElements, data.attestationSignature)); |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR, report); |
| } |
| |
| void DeviceCommissioner::OnDeviceAttestationInformationVerification( |
| void * context, const Credentials::DeviceAttestationVerifier::AttestationInfo & info, AttestationVerificationResult result) |
| { |
| MATTER_TRACE_SCOPE("OnDeviceAttestationInformationVerification", "DeviceCommissioner"); |
| DeviceCommissioner * commissioner = reinterpret_cast<DeviceCommissioner *>(context); |
| |
| if (commissioner->mCommissioningStage == CommissioningStage::kAttestationVerification) |
| { |
| // Check for revoked DAC Chain before calling delegate. Enter next stage. |
| |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<AttestationErrorInfo>(result); |
| |
| return commissioner->CommissioningStageComplete( |
| result == AttestationVerificationResult::kSuccess ? CHIP_NO_ERROR : CHIP_ERROR_INTERNAL, report); |
| } |
| |
| if (!commissioner->mDeviceBeingCommissioned) |
| { |
| ChipLogError(Controller, "Device attestation verification result received when we're not commissioning a device"); |
| return; |
| } |
| |
| auto & params = commissioner->mDefaultCommissioner->GetCommissioningParameters(); |
| Credentials::DeviceAttestationDelegate * deviceAttestationDelegate = params.GetDeviceAttestationDelegate(); |
| |
| if (params.GetCompletionStatus().attestationResult.HasValue()) |
| { |
| auto previousResult = params.GetCompletionStatus().attestationResult.Value(); |
| if (previousResult != AttestationVerificationResult::kSuccess) |
| { |
| result = previousResult; |
| } |
| } |
| |
| if (result != AttestationVerificationResult::kSuccess) |
| { |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<AttestationErrorInfo>(result); |
| if (result == AttestationVerificationResult::kNotImplemented) |
| { |
| ChipLogError(Controller, |
| "Failed in verifying 'Attestation Information' command received from the device due to default " |
| "DeviceAttestationVerifier Class not being overridden by a real implementation."); |
| commissioner->CommissioningStageComplete(CHIP_ERROR_NOT_IMPLEMENTED, report); |
| return; |
| } |
| |
| ChipLogError(Controller, |
| "Failed in verifying 'Attestation Information' command received from the device: err %hu. Look at " |
| "AttestationVerificationResult enum to understand the errors", |
| static_cast<uint16_t>(result)); |
| // Go look at AttestationVerificationResult enum in src/credentials/attestation_verifier/DeviceAttestationVerifier.h to |
| // understand the errors. |
| |
| // If a device attestation status delegate is installed, delegate handling of failure to the client and let them |
| // decide on whether to proceed further or not. |
| if (deviceAttestationDelegate) |
| { |
| commissioner->ExtendArmFailSafeForDeviceAttestation(info, result); |
| } |
| else |
| { |
| commissioner->CommissioningStageComplete(CHIP_ERROR_INTERNAL, report); |
| } |
| } |
| else |
| { |
| if (deviceAttestationDelegate && deviceAttestationDelegate->ShouldWaitAfterDeviceAttestation()) |
| { |
| commissioner->ExtendArmFailSafeForDeviceAttestation(info, result); |
| } |
| else |
| { |
| ChipLogProgress(Controller, "Successfully validated 'Attestation Information' command received from the device."); |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR); |
| } |
| } |
| } |
| |
| void DeviceCommissioner::OnArmFailSafeExtendedForDeviceAttestation( |
| void * context, const GeneralCommissioning::Commands::ArmFailSafeResponse::DecodableType &) |
| { |
| ChipLogProgress(Controller, "Successfully extended fail-safe timer to handle DA failure"); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| |
| // We have completed our command invoke, but we're not going to finish the |
| // commissioning step until our client examines the attestation |
| // information. Clear out mInvokeCancelFn (which points at the |
| // CommandSender we just finished using) now, so it's not dangling. |
| commissioner->mInvokeCancelFn = nullptr; |
| |
| commissioner->HandleDeviceAttestationCompleted(); |
| } |
| |
| void DeviceCommissioner::HandleDeviceAttestationCompleted() |
| { |
| if (!mDeviceBeingCommissioned) |
| { |
| return; |
| } |
| |
| auto & params = mDefaultCommissioner->GetCommissioningParameters(); |
| Credentials::DeviceAttestationDelegate * deviceAttestationDelegate = params.GetDeviceAttestationDelegate(); |
| if (deviceAttestationDelegate) |
| { |
| ChipLogProgress(Controller, "Device attestation completed, delegating continuation to client"); |
| deviceAttestationDelegate->OnDeviceAttestationCompleted(this, mDeviceBeingCommissioned, *mAttestationDeviceInfo, |
| mAttestationResult); |
| } |
| else |
| { |
| ChipLogProgress(Controller, "Device attestation failed and no delegate set, failing commissioning"); |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<AttestationErrorInfo>(mAttestationResult); |
| CommissioningStageComplete(CHIP_ERROR_INTERNAL, report); |
| } |
| } |
| |
| void DeviceCommissioner::OnFailedToExtendedArmFailSafeDeviceAttestation(void * context, CHIP_ERROR error) |
| { |
| ChipLogProgress(Controller, "Failed to extend fail-safe timer to handle attestation failure %s", chip::ErrorStr(error)); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<AttestationErrorInfo>(commissioner->mAttestationResult); |
| commissioner->CommissioningStageComplete(CHIP_ERROR_INTERNAL, report); |
| } |
| |
| void DeviceCommissioner::OnICDManagementRegisterClientResponse( |
| void * context, const app::Clusters::IcdManagement::Commands::RegisterClientResponse::DecodableType & data) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| VerifyOrExit(commissioner != nullptr, err = CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrExit(commissioner->mCommissioningStage == CommissioningStage::kICDRegistration, err = CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrExit(commissioner->mDeviceBeingCommissioned != nullptr, err = CHIP_ERROR_INCORRECT_STATE); |
| |
| if (commissioner->mPairingDelegate != nullptr) |
| { |
| commissioner->mPairingDelegate->OnICDRegistrationComplete( |
| ScopedNodeId(commissioner->mDeviceBeingCommissioned->GetDeviceId(), commissioner->GetFabricIndex()), data.ICDCounter); |
| } |
| |
| exit: |
| CommissioningDelegate::CommissioningReport report; |
| commissioner->CommissioningStageComplete(err, report); |
| } |
| |
| void DeviceCommissioner::OnICDManagementStayActiveResponse( |
| void * context, const app::Clusters::IcdManagement::Commands::StayActiveResponse::DecodableType & data) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| VerifyOrExit(commissioner != nullptr, err = CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrExit(commissioner->mCommissioningStage == CommissioningStage::kICDSendStayActive, err = CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrExit(commissioner->mDeviceBeingCommissioned != nullptr, err = CHIP_ERROR_INCORRECT_STATE); |
| |
| if (commissioner->mPairingDelegate != nullptr) |
| { |
| commissioner->mPairingDelegate->OnICDStayActiveComplete( |
| |
| ScopedNodeId(commissioner->mDeviceBeingCommissioned->GetDeviceId(), commissioner->GetFabricIndex()), |
| data.promisedActiveDuration); |
| } |
| |
| exit: |
| CommissioningDelegate::CommissioningReport report; |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR, report); |
| } |
| |
| bool DeviceCommissioner::ExtendArmFailSafeInternal(DeviceProxy * proxy, CommissioningStage step, uint16_t armFailSafeTimeout, |
| Optional<System::Clock::Timeout> commandTimeout, |
| OnExtendFailsafeSuccess onSuccess, OnExtendFailsafeFailure onFailure, |
| bool fireAndForget) |
| { |
| using namespace System; |
| using namespace System::Clock; |
| auto now = SystemClock().GetMonotonicTimestamp(); |
| auto newFailSafeTimeout = now + Seconds16(armFailSafeTimeout); |
| if (newFailSafeTimeout < proxy->GetFailSafeExpirationTimestamp()) |
| { |
| ChipLogProgress( |
| Controller, "Skipping arming failsafe: new time (%u seconds from now) before old time (%u seconds from now)", |
| armFailSafeTimeout, std::chrono::duration_cast<Seconds16>(proxy->GetFailSafeExpirationTimestamp() - now).count()); |
| return false; |
| } |
| |
| uint64_t breadcrumb = static_cast<uint64_t>(step); |
| GeneralCommissioning::Commands::ArmFailSafe::Type request; |
| request.expiryLengthSeconds = armFailSafeTimeout; |
| request.breadcrumb = breadcrumb; |
| ChipLogProgress(Controller, "Arming failsafe (%u seconds)", request.expiryLengthSeconds); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, onSuccess, onFailure, kRootEndpointId, commandTimeout, fireAndForget); |
| if (err != CHIP_NO_ERROR) |
| { |
| onFailure((!fireAndForget) ? this : nullptr, err); |
| return true; // we have called onFailure already |
| } |
| |
| // Note: The stored timestamp may become invalid if we fail asynchronously |
| proxy->SetFailSafeExpirationTimestamp(newFailSafeTimeout); |
| return true; |
| } |
| |
| void DeviceCommissioner::ExtendArmFailSafeForDeviceAttestation(const Credentials::DeviceAttestationVerifier::AttestationInfo & info, |
| Credentials::AttestationVerificationResult result) |
| { |
| mAttestationResult = result; |
| |
| auto & params = mDefaultCommissioner->GetCommissioningParameters(); |
| Credentials::DeviceAttestationDelegate * deviceAttestationDelegate = params.GetDeviceAttestationDelegate(); |
| |
| mAttestationDeviceInfo = Platform::MakeUnique<Credentials::DeviceAttestationVerifier::AttestationDeviceInfo>(info); |
| |
| auto expiryLengthSeconds = deviceAttestationDelegate->FailSafeExpiryTimeoutSecs(); |
| bool waitForFailsafeExtension = expiryLengthSeconds.HasValue(); |
| if (waitForFailsafeExtension) |
| { |
| ChipLogProgress(Controller, "Changing fail-safe timer to %u seconds to handle DA failure", expiryLengthSeconds.Value()); |
| // Per spec, anything we do with the fail-safe armed must not time out |
| // in less than kMinimumCommissioningStepTimeout. |
| waitForFailsafeExtension = |
| ExtendArmFailSafeInternal(mDeviceBeingCommissioned, mCommissioningStage, expiryLengthSeconds.Value(), |
| MakeOptional(kMinimumCommissioningStepTimeout), OnArmFailSafeExtendedForDeviceAttestation, |
| OnFailedToExtendedArmFailSafeDeviceAttestation, /* fireAndForget = */ false); |
| } |
| else |
| { |
| ChipLogProgress(Controller, "Proceeding without changing fail-safe timer value as delegate has not set it"); |
| } |
| |
| if (!waitForFailsafeExtension) |
| { |
| HandleDeviceAttestationCompleted(); |
| } |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ValidateAttestationInfo(const Credentials::DeviceAttestationVerifier::AttestationInfo & info) |
| { |
| MATTER_TRACE_SCOPE("ValidateAttestationInfo", "DeviceCommissioner"); |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mDeviceAttestationVerifier != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| mDeviceAttestationVerifier->VerifyAttestationInformation(info, &mDeviceAttestationInformationVerificationCallback); |
| |
| // TODO: Validate Firmware Information |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR |
| DeviceCommissioner::CheckForRevokedDACChain(const Credentials::DeviceAttestationVerifier::AttestationInfo & info) |
| { |
| MATTER_TRACE_SCOPE("CheckForRevokedDACChain", "DeviceCommissioner"); |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mDeviceAttestationVerifier != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| mDeviceAttestationVerifier->CheckForRevokedDACChain(info, &mDeviceAttestationInformationVerificationCallback); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ValidateCSR(DeviceProxy * proxy, const ByteSpan & NOCSRElements, |
| const ByteSpan & AttestationSignature, const ByteSpan & dac, const ByteSpan & csrNonce) |
| { |
| MATTER_TRACE_SCOPE("ValidateCSR", "DeviceCommissioner"); |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mDeviceAttestationVerifier != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| P256PublicKey dacPubkey; |
| ReturnErrorOnFailure(ExtractPubkeyFromX509Cert(dac, dacPubkey)); |
| |
| // Retrieve attestation challenge |
| ByteSpan attestationChallenge = |
| proxy->GetSecureSession().Value()->AsSecureSession()->GetCryptoContext().GetAttestationChallenge(); |
| |
| // The operational CA should also verify this on its end during NOC generation, if end-to-end attestation is desired. |
| return mDeviceAttestationVerifier->VerifyNodeOperationalCSRInformation(NOCSRElements, attestationChallenge, |
| AttestationSignature, dacPubkey, csrNonce); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::SendOperationalCertificateSigningRequestCommand(DeviceProxy * device, const ByteSpan & csrNonce, |
| Optional<System::Clock::Timeout> timeout) |
| { |
| MATTER_TRACE_SCOPE("SendOperationalCertificateSigningRequestCommand", "DeviceCommissioner"); |
| ChipLogDetail(Controller, "Sending CSR request to %p device", device); |
| VerifyOrReturnError(device != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| OperationalCredentials::Commands::CSRRequest::Type request; |
| request.CSRNonce = csrNonce; |
| |
| ReturnErrorOnFailure(SendCommissioningCommand(device, request, OnOperationalCertificateSigningRequest, OnCSRFailureResponse, |
| kRootEndpointId, timeout)); |
| ChipLogDetail(Controller, "Sent CSR request, waiting for the CSR"); |
| return CHIP_NO_ERROR; |
| } |
| |
| void DeviceCommissioner::OnCSRFailureResponse(void * context, CHIP_ERROR error) |
| { |
| MATTER_TRACE_SCOPE("OnCSRFailureResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Device failed to receive the CSR request Response: %s", chip::ErrorStr(error)); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(error); |
| } |
| |
| void DeviceCommissioner::OnOperationalCertificateSigningRequest( |
| void * context, const OperationalCredentials::Commands::CSRResponse::DecodableType & data) |
| { |
| MATTER_TRACE_SCOPE("OnOperationalCertificateSigningRequest", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Received certificate signing request from the device"); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<CSRResponse>(CSRResponse(data.NOCSRElements, data.attestationSignature)); |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR, report); |
| } |
| |
| void DeviceCommissioner::OnDeviceNOCChainGeneration(void * context, CHIP_ERROR status, const ByteSpan & noc, const ByteSpan & icac, |
| const ByteSpan & rcac, Optional<IdentityProtectionKeySpan> ipk, |
| Optional<NodeId> adminSubject) |
| { |
| MATTER_TRACE_SCOPE("OnDeviceNOCChainGeneration", "DeviceCommissioner"); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| |
| // The placeholder IPK is not satisfactory, but is there to fill the NocChain struct on error. It will still fail. |
| const uint8_t placeHolderIpk[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| if (status == CHIP_NO_ERROR && !ipk.HasValue()) |
| { |
| ChipLogError(Controller, "Did not have an IPK from the OperationalCredentialsIssuer! Cannot commission."); |
| status = CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| |
| ChipLogProgress(Controller, "Received callback from the CA for NOC Chain generation. Status %s", ErrorStr(status)); |
| if (status == CHIP_NO_ERROR && commissioner->mState != State::Initialized) |
| { |
| status = CHIP_ERROR_INCORRECT_STATE; |
| } |
| if (status != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Failed in generating device's operational credentials. Error %s", ErrorStr(status)); |
| } |
| |
| // TODO - Verify that the generated root cert matches with commissioner's root cert |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<NocChain>(NocChain(noc, icac, rcac, ipk.HasValue() ? ipk.Value() : IdentityProtectionKeySpan(placeHolderIpk), |
| adminSubject.HasValue() ? adminSubject.Value() : commissioner->GetNodeId())); |
| commissioner->CommissioningStageComplete(status, report); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::IssueNOCChain(const ByteSpan & NOCSRElements, NodeId nodeId, |
| chip::Callback::Callback<OnNOCChainGeneration> * callback) |
| { |
| MATTER_TRACE_SCOPE("IssueNOCChain", "DeviceCommissioner"); |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| |
| ChipLogProgress(Controller, "Getting certificate chain for the device on fabric idx %u", static_cast<unsigned>(mFabricIndex)); |
| |
| mOperationalCredentialsDelegate->SetNodeIdForNextNOCRequest(nodeId); |
| |
| if (mFabricIndex != kUndefinedFabricIndex) |
| { |
| mOperationalCredentialsDelegate->SetFabricIdForNextNOCRequest(GetFabricId()); |
| } |
| |
| // Note: we don't have attestationSignature, attestationChallenge, DAC, PAI so we are just providing an empty ByteSpan |
| // for those arguments. |
| return mOperationalCredentialsDelegate->GenerateNOCChain(NOCSRElements, ByteSpan(), ByteSpan(), ByteSpan(), ByteSpan(), |
| ByteSpan(), callback); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ProcessCSR(DeviceProxy * proxy, const ByteSpan & NOCSRElements, |
| const ByteSpan & AttestationSignature, const ByteSpan & dac, const ByteSpan & pai, |
| const ByteSpan & csrNonce) |
| { |
| MATTER_TRACE_SCOPE("ProcessOpCSR", "DeviceCommissioner"); |
| VerifyOrReturnError(mState == State::Initialized, CHIP_ERROR_INCORRECT_STATE); |
| |
| ChipLogProgress(Controller, "Getting certificate chain for the device from the issuer"); |
| |
| P256PublicKey dacPubkey; |
| ReturnErrorOnFailure(ExtractPubkeyFromX509Cert(dac, dacPubkey)); |
| |
| // Retrieve attestation challenge |
| ByteSpan attestationChallenge = |
| proxy->GetSecureSession().Value()->AsSecureSession()->GetCryptoContext().GetAttestationChallenge(); |
| |
| mOperationalCredentialsDelegate->SetNodeIdForNextNOCRequest(proxy->GetDeviceId()); |
| |
| if (mFabricIndex != kUndefinedFabricIndex) |
| { |
| mOperationalCredentialsDelegate->SetFabricIdForNextNOCRequest(GetFabricId()); |
| } |
| |
| return mOperationalCredentialsDelegate->GenerateNOCChain(NOCSRElements, csrNonce, AttestationSignature, attestationChallenge, |
| dac, pai, &mDeviceNOCChainCallback); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::SendOperationalCertificate(DeviceProxy * device, const ByteSpan & nocCertBuf, |
| const Optional<ByteSpan> & icaCertBuf, |
| const IdentityProtectionKeySpan ipk, const NodeId adminSubject, |
| Optional<System::Clock::Timeout> timeout) |
| { |
| MATTER_TRACE_SCOPE("SendOperationalCertificate", "DeviceCommissioner"); |
| |
| VerifyOrReturnError(device != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| OperationalCredentials::Commands::AddNOC::Type request; |
| request.NOCValue = nocCertBuf; |
| request.ICACValue = icaCertBuf; |
| request.IPKValue = ipk; |
| request.caseAdminSubject = adminSubject; |
| request.adminVendorId = mVendorId; |
| |
| ReturnErrorOnFailure(SendCommissioningCommand(device, request, OnOperationalCertificateAddResponse, OnAddNOCFailureResponse, |
| kRootEndpointId, timeout)); |
| |
| ChipLogProgress(Controller, "Sent operational certificate to the device"); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ConvertFromOperationalCertStatus(OperationalCredentials::NodeOperationalCertStatusEnum err) |
| { |
| using OperationalCredentials::NodeOperationalCertStatusEnum; |
| switch (err) |
| { |
| case NodeOperationalCertStatusEnum::kOk: |
| return CHIP_NO_ERROR; |
| case NodeOperationalCertStatusEnum::kInvalidPublicKey: |
| return CHIP_ERROR_INVALID_PUBLIC_KEY; |
| case NodeOperationalCertStatusEnum::kInvalidNodeOpId: |
| return CHIP_ERROR_WRONG_NODE_ID; |
| case NodeOperationalCertStatusEnum::kInvalidNOC: |
| return CHIP_ERROR_UNSUPPORTED_CERT_FORMAT; |
| case NodeOperationalCertStatusEnum::kMissingCsr: |
| return CHIP_ERROR_INCORRECT_STATE; |
| case NodeOperationalCertStatusEnum::kTableFull: |
| return CHIP_ERROR_NO_MEMORY; |
| case NodeOperationalCertStatusEnum::kInvalidAdminSubject: |
| return CHIP_ERROR_INVALID_ADMIN_SUBJECT; |
| case NodeOperationalCertStatusEnum::kFabricConflict: |
| return CHIP_ERROR_FABRIC_EXISTS; |
| case NodeOperationalCertStatusEnum::kLabelConflict: |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| case NodeOperationalCertStatusEnum::kInvalidFabricIndex: |
| return CHIP_ERROR_INVALID_FABRIC_INDEX; |
| case NodeOperationalCertStatusEnum::kUnknownEnumValue: |
| // Is this a reasonable value? |
| return CHIP_ERROR_CERT_LOAD_FAILED; |
| } |
| |
| return CHIP_ERROR_CERT_LOAD_FAILED; |
| } |
| |
| void DeviceCommissioner::OnAddNOCFailureResponse(void * context, CHIP_ERROR error) |
| { |
| MATTER_TRACE_SCOPE("OnAddNOCFailureResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Device failed to receive the operational certificate Response: %s", chip::ErrorStr(error)); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(error); |
| } |
| |
| void DeviceCommissioner::OnOperationalCertificateAddResponse( |
| void * context, const OperationalCredentials::Commands::NOCResponse::DecodableType & data) |
| { |
| MATTER_TRACE_SCOPE("OnOperationalCertificateAddResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Device returned status %d on receiving the NOC", to_underlying(data.statusCode)); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(commissioner->mState == State::Initialized, err = CHIP_ERROR_INCORRECT_STATE); |
| |
| VerifyOrExit(commissioner->mDeviceBeingCommissioned != nullptr, err = CHIP_ERROR_INCORRECT_STATE); |
| |
| err = ConvertFromOperationalCertStatus(data.statusCode); |
| SuccessOrExit(err); |
| |
| err = commissioner->OnOperationalCredentialsProvisioningCompletion(commissioner->mDeviceBeingCommissioned); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogProgress(Controller, "Add NOC failed with error %s", ErrorStr(err)); |
| commissioner->CommissioningStageComplete(err); |
| } |
| } |
| |
| CHIP_ERROR DeviceCommissioner::SendTrustedRootCertificate(DeviceProxy * device, const ByteSpan & rcac, |
| Optional<System::Clock::Timeout> timeout) |
| { |
| MATTER_TRACE_SCOPE("SendTrustedRootCertificate", "DeviceCommissioner"); |
| VerifyOrReturnError(device != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| ChipLogProgress(Controller, "Sending root certificate to the device"); |
| |
| OperationalCredentials::Commands::AddTrustedRootCertificate::Type request; |
| request.rootCACertificate = rcac; |
| ReturnErrorOnFailure( |
| SendCommissioningCommand(device, request, OnRootCertSuccessResponse, OnRootCertFailureResponse, kRootEndpointId, timeout)); |
| |
| ChipLogProgress(Controller, "Sent root certificate to the device"); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void DeviceCommissioner::OnRootCertSuccessResponse(void * context, const chip::app::DataModel::NullObjectType &) |
| { |
| MATTER_TRACE_SCOPE("OnRootCertSuccessResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Device confirmed that it has received the root certificate"); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR); |
| } |
| |
| void DeviceCommissioner::OnRootCertFailureResponse(void * context, CHIP_ERROR error) |
| { |
| MATTER_TRACE_SCOPE("OnRootCertFailureResponse", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Device failed to receive the root certificate Response: %s", chip::ErrorStr(error)); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(error); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::OnOperationalCredentialsProvisioningCompletion(DeviceProxy * device) |
| { |
| MATTER_TRACE_SCOPE("OnOperationalCredentialsProvisioningCompletion", "DeviceCommissioner"); |
| ChipLogProgress(Controller, "Operational credentials provisioned on device %p", device); |
| VerifyOrReturnError(device != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| if (mPairingDelegate != nullptr) |
| { |
| mPairingDelegate->OnStatusUpdate(DevicePairingDelegate::SecurePairingSuccess); |
| } |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| #if CONFIG_NETWORK_LAYER_BLE |
| #if CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| void DeviceCommissioner::ConnectBleTransportToSelf() |
| { |
| Transport::BLEBase & transport = std::get<Transport::BLE<1>>(mSystemState->TransportMgr()->GetTransport().GetTransports()); |
| if (!transport.IsBleLayerTransportSetToSelf()) |
| { |
| transport.SetBleLayerTransportToSelf(); |
| } |
| } |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE |
| |
| void DeviceCommissioner::CloseBleConnection() |
| { |
| // It is fine since we can only commission one device at the same time. |
| // We should be able to distinguish different BLE connections if we want |
| // to commission multiple devices at the same time over BLE. |
| mSystemState->BleLayer()->CloseAllBleConnections(); |
| } |
| #endif |
| |
| CHIP_ERROR DeviceCommissioner::DiscoverCommissionableNodes(Dnssd::DiscoveryFilter filter) |
| { |
| ReturnErrorOnFailure(SetUpNodeDiscovery()); |
| return mDNSResolver.DiscoverCommissionableNodes(filter); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::StopCommissionableDiscovery() |
| { |
| return mDNSResolver.StopDiscovery(); |
| } |
| |
| const Dnssd::CommissionNodeData * DeviceCommissioner::GetDiscoveredDevice(int idx) |
| { |
| return GetDiscoveredNode(idx); |
| } |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY // make this commissioner discoverable |
| |
| CHIP_ERROR DeviceCommissioner::SetUdcListenPort(uint16_t listenPort) |
| { |
| if (mState == State::Initialized) |
| { |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| mUdcListenPort = listenPort; |
| return CHIP_NO_ERROR; |
| } |
| |
| void DeviceCommissioner::FindCommissionableNode(char * instanceName) |
| { |
| Dnssd::DiscoveryFilter filter(Dnssd::DiscoveryFilterType::kInstanceName, instanceName); |
| DiscoverCommissionableNodes(filter); |
| } |
| |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY |
| |
| void DeviceCommissioner::OnNodeDiscovered(const chip::Dnssd::DiscoveredNodeData & nodeData) |
| { |
| #if CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY |
| if (mUdcServer != nullptr) |
| { |
| mUdcServer->OnCommissionableNodeFound(nodeData); |
| } |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY |
| AbstractDnssdDiscoveryController::OnNodeDiscovered(nodeData); |
| mSetUpCodePairer.NotifyCommissionableDeviceDiscovered(nodeData); |
| } |
| |
| void DeviceCommissioner::OnBasicSuccess(void * context, const chip::app::DataModel::NullObjectType &) |
| { |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR); |
| } |
| |
| void DeviceCommissioner::OnBasicFailure(void * context, CHIP_ERROR error) |
| { |
| ChipLogProgress(Controller, "Received failure response %s\n", chip::ErrorStr(error)); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(error); |
| } |
| |
| static GeneralCommissioning::Commands::ArmFailSafe::Type DisarmFailsafeRequest() |
| { |
| GeneralCommissioning::Commands::ArmFailSafe::Type request; |
| request.expiryLengthSeconds = 0; // Expire immediately. |
| request.breadcrumb = 0; |
| return request; |
| } |
| |
| static void MarkForEviction(const Optional<SessionHandle> & session) |
| { |
| if (session.HasValue()) |
| { |
| session.Value()->AsSecureSession()->MarkForEviction(); |
| } |
| } |
| |
| void DeviceCommissioner::CleanupCommissioning(DeviceProxy * proxy, NodeId nodeId, const CompletionStatus & completionStatus) |
| { |
| // At this point, proxy == mDeviceBeingCommissioned, nodeId == mDeviceBeingCommissioned->GetDeviceId() |
| |
| mCommissioningCompletionStatus = completionStatus; |
| |
| if (completionStatus.err == CHIP_NO_ERROR) |
| { |
| // CommissioningStageComplete uses mDeviceBeingCommissioned, which can |
| // be commissionee if we are cleaning up before we've gone operational. Normally |
| // that would not happen in this non-error case, _except_ if we were told to skip sending |
| // CommissioningComplete: in that case we do not have an operational DeviceProxy, so |
| // we're using our CommissioneeDeviceProxy to do a successful cleanup. |
| // |
| // This means we have to call CommissioningStageComplete() before we destroy commissionee. |
| // |
| // This should be safe, because CommissioningStageComplete() does not call CleanupCommissioning |
| // when called in the cleanup stage (which is where we are), and StopPairing does not directly release |
| // mDeviceBeingCommissioned. |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| |
| CommissioneeDeviceProxy * commissionee = FindCommissioneeDevice(nodeId); |
| if (commissionee != nullptr) |
| { |
| ReleaseCommissioneeDevice(commissionee); |
| } |
| // Send the callbacks, we're done. |
| SendCommissioningCompleteCallbacks(nodeId, mCommissioningCompletionStatus); |
| } |
| else if (completionStatus.err == CHIP_ERROR_CANCELLED) |
| { |
| // If we're cleaning up because cancellation has been requested via StopPairing(), expire the failsafe |
| // in the background and reset our state synchronously, so a new commissioning attempt can be started. |
| CommissioneeDeviceProxy * commissionee = FindCommissioneeDevice(nodeId); |
| SessionHolder session((commissionee == proxy) ? commissionee->DetachSecureSession().Value() |
| : proxy->GetSecureSession().Value()); |
| |
| auto request = DisarmFailsafeRequest(); |
| auto onSuccessCb = [session](const app::ConcreteCommandPath & aPath, const app::StatusIB & aStatus, |
| const decltype(request)::ResponseType & responseData) { |
| ChipLogProgress(Controller, "Failsafe disarmed"); |
| MarkForEviction(session.Get()); |
| }; |
| auto onFailureCb = [session](CHIP_ERROR aError) { |
| ChipLogProgress(Controller, "Ignoring failure to disarm failsafe: %" CHIP_ERROR_FORMAT, aError.Format()); |
| MarkForEviction(session.Get()); |
| }; |
| |
| ChipLogProgress(Controller, "Disarming failsafe on device %p in background", proxy); |
| CHIP_ERROR err = InvokeCommandRequest(proxy->GetExchangeManager(), session.Get().Value(), kRootEndpointId, request, |
| onSuccessCb, onFailureCb); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Failed to send command to disarm fail-safe: %" CHIP_ERROR_FORMAT, err.Format()); |
| } |
| |
| CleanupDoneAfterError(); |
| } |
| else if (completionStatus.failedStage.HasValue() && completionStatus.failedStage.Value() >= kWiFiNetworkSetup) |
| { |
| // If we were already doing network setup, we need to retain the pase session and start again from network setup stage. |
| // We do not need to reset the failsafe here because we want to keep everything on the device up to this point, so just |
| // send the completion callbacks (see "Commissioning Flows Error Handling" in the spec). |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| SendCommissioningCompleteCallbacks(nodeId, mCommissioningCompletionStatus); |
| } |
| else |
| { |
| // If we've failed somewhere in the early stages (or we don't have a failedStage specified), we need to start from the |
| // beginning. However, because some of the commands can only be sent once per arm-failsafe, we also need to force a reset on |
| // the failsafe so we can start fresh on the next attempt. |
| ChipLogProgress(Controller, "Disarming failsafe on device %p", proxy); |
| auto request = DisarmFailsafeRequest(); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnDisarmFailsafe, OnDisarmFailsafeFailure, kRootEndpointId); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just pretend like the command errored out async. |
| ChipLogError(Controller, "Failed to send command to disarm fail-safe: %" CHIP_ERROR_FORMAT, err.Format()); |
| CleanupDoneAfterError(); |
| } |
| } |
| } |
| |
| void DeviceCommissioner::OnDisarmFailsafe(void * context, |
| const GeneralCommissioning::Commands::ArmFailSafeResponse::DecodableType & data) |
| { |
| ChipLogProgress(Controller, "Failsafe disarmed"); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CleanupDoneAfterError(); |
| } |
| |
| void DeviceCommissioner::OnDisarmFailsafeFailure(void * context, CHIP_ERROR error) |
| { |
| ChipLogProgress(Controller, "Ignoring failure to disarm failsafe: %" CHIP_ERROR_FORMAT, error.Format()); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CleanupDoneAfterError(); |
| } |
| |
| void DeviceCommissioner::CleanupDoneAfterError() |
| { |
| // If someone nulled out our mDeviceBeingCommissioned, there's nothing else |
| // to do here. |
| VerifyOrReturn(mDeviceBeingCommissioned != nullptr); |
| |
| NodeId nodeId = mDeviceBeingCommissioned->GetDeviceId(); |
| |
| // Signal completion - this will reset mDeviceBeingCommissioned. |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| |
| // At this point, we also want to close off the pase session so we need to re-establish |
| CommissioneeDeviceProxy * commissionee = FindCommissioneeDevice(nodeId); |
| |
| // If we've disarmed the failsafe, it's because we're starting again, so kill the pase connection. |
| if (commissionee != nullptr) |
| { |
| ReleaseCommissioneeDevice(commissionee); |
| } |
| |
| // Invoke callbacks last, after we have cleared up all state. |
| SendCommissioningCompleteCallbacks(nodeId, mCommissioningCompletionStatus); |
| } |
| |
| void DeviceCommissioner::SendCommissioningCompleteCallbacks(NodeId nodeId, const CompletionStatus & completionStatus) |
| { |
| MATTER_LOG_METRIC_END(kMetricDeviceCommissionerCommission, completionStatus.err); |
| |
| ChipLogProgress(Controller, "Commissioning complete for node ID 0x" ChipLogFormatX64 ": %s", ChipLogValueX64(nodeId), |
| (completionStatus.err == CHIP_NO_ERROR ? "success" : completionStatus.err.AsString())); |
| mCommissioningStage = CommissioningStage::kSecurePairing; |
| |
| if (mPairingDelegate == nullptr) |
| { |
| return; |
| } |
| |
| mPairingDelegate->OnCommissioningComplete(nodeId, completionStatus.err); |
| PeerId peerId(GetCompressedFabricId(), nodeId); |
| if (completionStatus.err == CHIP_NO_ERROR) |
| { |
| mPairingDelegate->OnCommissioningSuccess(peerId); |
| } |
| else |
| { |
| // TODO: We should propogate detailed error information (commissioningError, networkCommissioningStatus) from |
| // completionStatus. |
| mPairingDelegate->OnCommissioningFailure(peerId, completionStatus.err, completionStatus.failedStage.ValueOr(kError), |
| completionStatus.attestationResult); |
| } |
| } |
| |
| void DeviceCommissioner::CommissioningStageComplete(CHIP_ERROR err, CommissioningDelegate::CommissioningReport report) |
| { |
| // Once this stage is complete, reset mDeviceBeingCommissioned - this will be reset when the delegate calls the next step. |
| MATTER_TRACE_SCOPE("CommissioningStageComplete", "DeviceCommissioner"); |
| MATTER_LOG_METRIC_END(MetricKeyForCommissioningStage(mCommissioningStage), err); |
| VerifyOrDie(mDeviceBeingCommissioned); |
| |
| NodeId nodeId = mDeviceBeingCommissioned->GetDeviceId(); |
| DeviceProxy * proxy = mDeviceBeingCommissioned; |
| mDeviceBeingCommissioned = nullptr; |
| mInvokeCancelFn = nullptr; |
| mWriteCancelFn = nullptr; |
| |
| if (mPairingDelegate != nullptr) |
| { |
| mPairingDelegate->OnCommissioningStatusUpdate(PeerId(GetCompressedFabricId(), nodeId), mCommissioningStage, err); |
| } |
| |
| if (mCommissioningDelegate == nullptr) |
| { |
| return; |
| } |
| report.stageCompleted = mCommissioningStage; |
| CHIP_ERROR status = mCommissioningDelegate->CommissioningStepFinished(err, report); |
| if (status != CHIP_NO_ERROR && mCommissioningStage != CommissioningStage::kCleanup) |
| { |
| // Commissioning delegate will only return error if it failed to perform the appropriate commissioning step. |
| // In this case, we should complete the commissioning for it. |
| CompletionStatus completionStatus; |
| completionStatus.err = status; |
| completionStatus.failedStage = MakeOptional(report.stageCompleted); |
| mCommissioningStage = CommissioningStage::kCleanup; |
| mDeviceBeingCommissioned = proxy; |
| CleanupCommissioning(proxy, nodeId, completionStatus); |
| } |
| } |
| |
| void DeviceCommissioner::OnDeviceConnectedFn(void * context, Messaging::ExchangeManager & exchangeMgr, |
| const SessionHandle & sessionHandle) |
| { |
| // CASE session established. |
| MATTER_LOG_METRIC_END(kMetricDeviceCommissioningOperationalSetup, CHIP_NO_ERROR); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| VerifyOrDie(commissioner->mCommissioningStage == CommissioningStage::kFindOperationalForStayActive || |
| commissioner->mCommissioningStage == CommissioningStage::kFindOperationalForCommissioningComplete); |
| VerifyOrDie(commissioner->mDeviceBeingCommissioned->GetDeviceId() == sessionHandle->GetPeer().GetNodeId()); |
| commissioner->CancelCASECallbacks(); // ensure all CASE callbacks are unregistered |
| |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<OperationalNodeFoundData>(OperationalNodeFoundData(OperationalDeviceProxy(&exchangeMgr, sessionHandle))); |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR, report); |
| } |
| |
| void DeviceCommissioner::OnDeviceConnectionFailureFn(void * context, const ScopedNodeId & peerId, CHIP_ERROR error) |
| { |
| // CASE session establishment failed. |
| MATTER_LOG_METRIC_END(kMetricDeviceCommissioningOperationalSetup, error); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| VerifyOrDie(commissioner->mCommissioningStage == CommissioningStage::kFindOperationalForStayActive || |
| commissioner->mCommissioningStage == CommissioningStage::kFindOperationalForCommissioningComplete); |
| VerifyOrDie(commissioner->mDeviceBeingCommissioned->GetDeviceId() == peerId.GetNodeId()); |
| commissioner->CancelCASECallbacks(); // ensure all CASE callbacks are unregistered |
| |
| if (error != CHIP_NO_ERROR) |
| { |
| ChipLogProgress(Controller, "Device connection failed. Error %" CHIP_ERROR_FORMAT, error.Format()); |
| } |
| else |
| { |
| // Ensure that commissioning stage advancement is done based on seeing an error. |
| ChipLogError(Controller, "Device connection failed without a valid error code."); |
| error = CHIP_ERROR_INTERNAL; |
| } |
| commissioner->CommissioningStageComplete(error); |
| } |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_AUTOMATIC_CASE_RETRIES |
| // No specific action to take on either success or failure here; we're just |
| // trying to bump the fail-safe, and if that fails it's not clear there's much |
| // we can to with that. |
| static void OnExtendFailsafeForCASERetryFailure(void * context, CHIP_ERROR error) |
| { |
| ChipLogError(Controller, "Failed to extend fail-safe for CASE retry: %" CHIP_ERROR_FORMAT, error.Format()); |
| } |
| static void |
| OnExtendFailsafeForCASERetrySuccess(void * context, |
| const app::Clusters::GeneralCommissioning::Commands::ArmFailSafeResponse::DecodableType & data) |
| { |
| ChipLogProgress(Controller, "Status of extending fail-safe for CASE retry: %u", to_underlying(data.errorCode)); |
| } |
| |
| void DeviceCommissioner::OnDeviceConnectionRetryFn(void * context, const ScopedNodeId & peerId, CHIP_ERROR error, |
| System::Clock::Seconds16 retryTimeout) |
| { |
| ChipLogError(Controller, |
| "Session establishment failed for " ChipLogFormatScopedNodeId ", error: %" CHIP_ERROR_FORMAT |
| ". Next retry expected to get a response to Sigma1 or fail within %d seconds", |
| ChipLogValueScopedNodeId(peerId), error.Format(), retryTimeout.count()); |
| |
| auto self = static_cast<DeviceCommissioner *>(context); |
| VerifyOrDie(self->GetCommissioningStage() == CommissioningStage::kFindOperationalForStayActive || |
| self->GetCommissioningStage() == CommissioningStage::kFindOperationalForCommissioningComplete); |
| VerifyOrDie(self->mDeviceBeingCommissioned->GetDeviceId() == peerId.GetNodeId()); |
| |
| // We need to do the fail-safe arming over the PASE session. |
| auto * commissioneeDevice = self->FindCommissioneeDevice(peerId.GetNodeId()); |
| if (!commissioneeDevice) |
| { |
| // Commissioning canceled, presumably. Just ignore the notification, |
| // not much we can do here. |
| return; |
| } |
| |
| // Extend by the default failsafe timeout plus our retry timeout, so we can |
| // be sure the fail-safe will not expire before we try the next time, if |
| // there will be a next time. |
| // |
| // TODO: Make it possible for our clients to control the exact timeout here? |
| uint16_t failsafeTimeout; |
| if (UINT16_MAX - retryTimeout.count() < kDefaultFailsafeTimeout) |
| { |
| failsafeTimeout = UINT16_MAX; |
| } |
| else |
| { |
| failsafeTimeout = static_cast<uint16_t>(retryTimeout.count() + kDefaultFailsafeTimeout); |
| } |
| |
| // A false return is fine; we don't want to make the fail-safe shorter here. |
| self->ExtendArmFailSafeInternal(commissioneeDevice, self->GetCommissioningStage(), failsafeTimeout, |
| MakeOptional(kMinimumCommissioningStepTimeout), OnExtendFailsafeForCASERetrySuccess, |
| OnExtendFailsafeForCASERetryFailure, /* fireAndForget = */ true); |
| } |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_AUTOMATIC_CASE_RETRIES |
| |
| // ClusterStateCache::Callback impl |
| void DeviceCommissioner::OnDone(app::ReadClient * readClient) |
| { |
| VerifyOrDie(readClient != nullptr && readClient == mReadClient.get()); |
| mReadClient.reset(); |
| switch (mCommissioningStage) |
| { |
| case CommissioningStage::kReadCommissioningInfo: |
| // Silently complete the stage, data will be saved in attribute cache and |
| // will be parsed after all ReadCommissioningInfo stages are completed. |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| break; |
| case CommissioningStage::kReadCommissioningInfo2: |
| // Note: Only parse commissioning info in the last ReadCommissioningInfo stage. |
| ParseCommissioningInfo(); |
| break; |
| default: |
| VerifyOrDie(false); |
| break; |
| } |
| } |
| |
| void DeviceCommissioner::ParseCommissioningInfo() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| ReadCommissioningInfo info; |
| |
| err = ParseCommissioningInfo1(info); |
| if (err == CHIP_NO_ERROR) |
| { |
| err = ParseCommissioningInfo2(info); |
| } |
| |
| // Move ownership of mAttributeCache to the stack, but don't release it until this function returns. |
| // This way we don't have to make a copy while parsing commissioning info, and it won't |
| // affect future commissioning steps. |
| // |
| // The stack reference needs to survive until CommissioningStageComplete and OnReadCommissioningInfo |
| // return. |
| auto attributeCache = std::move(mAttributeCache); |
| |
| if (mPairingDelegate != nullptr && err == CHIP_NO_ERROR) |
| { |
| mPairingDelegate->OnReadCommissioningInfo(info); |
| } |
| |
| CommissioningDelegate::CommissioningReport report; |
| report.Set<ReadCommissioningInfo>(info); |
| CommissioningStageComplete(err, report); |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ParseCommissioningInfo1(ReadCommissioningInfo & info) |
| { |
| CHIP_ERROR err; |
| CHIP_ERROR return_err = CHIP_NO_ERROR; |
| |
| // Try to parse as much as we can here before returning, even if attributes |
| // are missing or cannot be decoded. |
| { |
| using namespace chip::app::Clusters::GeneralCommissioning; |
| using namespace chip::app::Clusters::GeneralCommissioning::Attributes; |
| |
| BasicCommissioningInfo::TypeInfo::DecodableType basicInfo; |
| err = mAttributeCache->Get<BasicCommissioningInfo::TypeInfo>(kRootEndpointId, basicInfo); |
| if (err == CHIP_NO_ERROR) |
| { |
| info.general.recommendedFailsafe = basicInfo.failSafeExpiryLengthSeconds; |
| } |
| else |
| { |
| ChipLogError(Controller, "Failed to read BasicCommissioningInfo: %" CHIP_ERROR_FORMAT, err.Format()); |
| return_err = err; |
| } |
| |
| err = mAttributeCache->Get<RegulatoryConfig::TypeInfo>(kRootEndpointId, info.general.currentRegulatoryLocation); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Failed to read RegulatoryConfig: %" CHIP_ERROR_FORMAT, err.Format()); |
| return_err = err; |
| } |
| |
| err = mAttributeCache->Get<LocationCapability::TypeInfo>(kRootEndpointId, info.general.locationCapability); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Failed to read LocationCapability: %" CHIP_ERROR_FORMAT, err.Format()); |
| return_err = err; |
| } |
| |
| err = mAttributeCache->Get<Breadcrumb::TypeInfo>(kRootEndpointId, info.general.breadcrumb); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Failed to read Breadcrumb: %" CHIP_ERROR_FORMAT, err.Format()); |
| return_err = err; |
| } |
| } |
| |
| { |
| using namespace chip::app::Clusters::BasicInformation; |
| using namespace chip::app::Clusters::BasicInformation::Attributes; |
| |
| err = mAttributeCache->Get<VendorID::TypeInfo>(kRootEndpointId, info.basic.vendorId); |
| return_err = err == CHIP_NO_ERROR ? return_err : err; |
| |
| err = mAttributeCache->Get<ProductID::TypeInfo>(kRootEndpointId, info.basic.productId); |
| return_err = err == CHIP_NO_ERROR ? return_err : err; |
| } |
| // Try to parse as much as we can here before returning, even if this is an error. |
| return_err = err == CHIP_NO_ERROR ? return_err : err; |
| |
| // Set the network cluster endpoints first so we can match up the connection |
| // times. Note that here we don't know what endpoints the network |
| // commissioning clusters might be on. |
| err = mAttributeCache->ForEachAttribute( |
| app::Clusters::NetworkCommissioning::Id, [this, &info](const app::ConcreteAttributePath & path) { |
| using namespace chip::app::Clusters; |
| using namespace chip::app::Clusters::NetworkCommissioning::Attributes; |
| if (path.mAttributeId != FeatureMap::Id) |
| { |
| return CHIP_NO_ERROR; |
| } |
| TLV::TLVReader reader; |
| if (this->mAttributeCache->Get(path, reader) == CHIP_NO_ERROR) |
| { |
| BitFlags<NetworkCommissioning::Feature> features; |
| if (app::DataModel::Decode(reader, features) == CHIP_NO_ERROR) |
| { |
| if (features.Has(NetworkCommissioning::Feature::kWiFiNetworkInterface)) |
| { |
| ChipLogProgress(Controller, "----- NetworkCommissioning Features: has WiFi. endpointid = %u", |
| path.mEndpointId); |
| info.network.wifi.endpoint = path.mEndpointId; |
| } |
| else if (features.Has(NetworkCommissioning::Feature::kThreadNetworkInterface)) |
| { |
| ChipLogProgress(Controller, "----- NetworkCommissioning Features: has Thread. endpointid = %u", |
| path.mEndpointId); |
| info.network.thread.endpoint = path.mEndpointId; |
| } |
| else if (features.Has(NetworkCommissioning::Feature::kEthernetNetworkInterface)) |
| { |
| ChipLogProgress(Controller, "----- NetworkCommissioning Features: has Ethernet. endpointid = %u", |
| path.mEndpointId); |
| info.network.eth.endpoint = path.mEndpointId; |
| } |
| else |
| { |
| ChipLogProgress(Controller, "----- NetworkCommissioning Features: no features."); |
| // TODO: Gross workaround for the empty feature map on all clusters. Remove. |
| if (info.network.thread.endpoint == kInvalidEndpointId) |
| { |
| info.network.thread.endpoint = path.mEndpointId; |
| } |
| if (info.network.wifi.endpoint == kInvalidEndpointId) |
| { |
| info.network.wifi.endpoint = path.mEndpointId; |
| } |
| } |
| } |
| } |
| return CHIP_NO_ERROR; |
| }); |
| return_err = err == CHIP_NO_ERROR ? return_err : err; |
| |
| err = mAttributeCache->ForEachAttribute( |
| app::Clusters::NetworkCommissioning::Id, [this, &info](const app::ConcreteAttributePath & path) { |
| using namespace chip::app::Clusters::NetworkCommissioning::Attributes; |
| if (path.mAttributeId != ConnectMaxTimeSeconds::Id) |
| { |
| return CHIP_NO_ERROR; |
| } |
| ConnectMaxTimeSeconds::TypeInfo::DecodableArgType time; |
| ReturnErrorOnFailure(this->mAttributeCache->Get<ConnectMaxTimeSeconds::TypeInfo>(path, time)); |
| if (path.mEndpointId == info.network.wifi.endpoint) |
| { |
| info.network.wifi.minConnectionTime = time; |
| } |
| else if (path.mEndpointId == info.network.thread.endpoint) |
| { |
| info.network.thread.minConnectionTime = time; |
| } |
| else if (path.mEndpointId == info.network.eth.endpoint) |
| { |
| info.network.eth.minConnectionTime = time; |
| } |
| return CHIP_NO_ERROR; |
| }); |
| return_err = err == CHIP_NO_ERROR ? return_err : err; |
| |
| ParseTimeSyncInfo(info); |
| |
| if (return_err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Error parsing commissioning information"); |
| } |
| |
| return return_err; |
| } |
| |
| void DeviceCommissioner::ParseTimeSyncInfo(ReadCommissioningInfo & info) |
| { |
| using namespace app::Clusters; |
| |
| CHIP_ERROR err; |
| // If we fail to get the feature map, there's no viable time cluster, don't set anything. |
| TimeSynchronization::Attributes::FeatureMap::TypeInfo::DecodableType featureMap; |
| err = mAttributeCache->Get<TimeSynchronization::Attributes::FeatureMap::TypeInfo>(kRootEndpointId, featureMap); |
| if (err != CHIP_NO_ERROR) |
| { |
| info.requiresUTC = false; |
| info.requiresTimeZone = false; |
| info.requiresDefaultNTP = false; |
| info.requiresTrustedTimeSource = false; |
| return; |
| } |
| info.requiresUTC = true; |
| info.requiresTimeZone = featureMap & chip::to_underlying(TimeSynchronization::Feature::kTimeZone); |
| info.requiresDefaultNTP = featureMap & chip::to_underlying(TimeSynchronization::Feature::kNTPClient); |
| info.requiresTrustedTimeSource = featureMap & chip::to_underlying(TimeSynchronization::Feature::kTimeSyncClient); |
| |
| if (info.requiresTimeZone) |
| { |
| err = mAttributeCache->Get<TimeSynchronization::Attributes::TimeZoneListMaxSize::TypeInfo>(kRootEndpointId, |
| info.maxTimeZoneSize); |
| if (err != CHIP_NO_ERROR) |
| { |
| // This information should be available, let's do our best with what we have, but we can't set |
| // the time zone without this information |
| info.requiresTimeZone = false; |
| } |
| err = |
| mAttributeCache->Get<TimeSynchronization::Attributes::DSTOffsetListMaxSize::TypeInfo>(kRootEndpointId, info.maxDSTSize); |
| if (err != CHIP_NO_ERROR) |
| { |
| info.requiresTimeZone = false; |
| } |
| } |
| if (info.requiresDefaultNTP) |
| { |
| TimeSynchronization::Attributes::DefaultNTP::TypeInfo::DecodableType defaultNTP; |
| err = mAttributeCache->Get<TimeSynchronization::Attributes::DefaultNTP::TypeInfo>(kRootEndpointId, defaultNTP); |
| if (err == CHIP_NO_ERROR && (!defaultNTP.IsNull()) && (defaultNTP.Value().size() != 0)) |
| { |
| info.requiresDefaultNTP = false; |
| } |
| } |
| if (info.requiresTrustedTimeSource) |
| { |
| TimeSynchronization::Attributes::TrustedTimeSource::TypeInfo::DecodableType trustedTimeSource; |
| err = |
| mAttributeCache->Get<TimeSynchronization::Attributes::TrustedTimeSource::TypeInfo>(kRootEndpointId, trustedTimeSource); |
| |
| if (err == CHIP_NO_ERROR && !trustedTimeSource.IsNull()) |
| { |
| info.requiresTrustedTimeSource = false; |
| } |
| } |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ParseCommissioningInfo2(ReadCommissioningInfo & info) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| using namespace chip::app::Clusters::GeneralCommissioning::Attributes; |
| |
| if (mAttributeCache->Get<SupportsConcurrentConnection::TypeInfo>(kRootEndpointId, info.supportsConcurrentConnection) != |
| CHIP_NO_ERROR) |
| { |
| // May not be present so don't return the error code, non fatal, default concurrent |
| ChipLogError(Controller, "Failed to read SupportsConcurrentConnection: %" CHIP_ERROR_FORMAT, err.Format()); |
| info.supportsConcurrentConnection = true; |
| } |
| |
| err = ParseFabrics(info); |
| |
| if (err == CHIP_NO_ERROR) |
| { |
| err = ParseICDInfo(info); |
| } |
| |
| return err; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ParseFabrics(ReadCommissioningInfo & info) |
| { |
| CHIP_ERROR err; |
| CHIP_ERROR return_err = CHIP_NO_ERROR; |
| |
| // We might not have requested a Fabrics attribute at all, so not having a |
| // value for it is not an error. |
| err = mAttributeCache->ForEachAttribute(OperationalCredentials::Id, [this, &info](const app::ConcreteAttributePath & path) { |
| using namespace chip::app::Clusters::OperationalCredentials::Attributes; |
| // this code is checking if the device is already on the commissioner's fabric. |
| // if a matching fabric is found, then remember the nodeId so that the commissioner |
| // can, if it decides to, cancel commissioning (before it fails in AddNoc) and know |
| // the device's nodeId on its fabric. |
| switch (path.mAttributeId) |
| { |
| case Fabrics::Id: { |
| Fabrics::TypeInfo::DecodableType fabrics; |
| ReturnErrorOnFailure(this->mAttributeCache->Get<Fabrics::TypeInfo>(path, fabrics)); |
| // this is a best effort attempt to find a matching fabric, so no error checking on iter |
| auto iter = fabrics.begin(); |
| while (iter.Next()) |
| { |
| auto & fabricDescriptor = iter.GetValue(); |
| ChipLogProgress(Controller, |
| "DeviceCommissioner::OnDone - fabric.vendorId=0x%04X fabric.fabricId=0x" ChipLogFormatX64 |
| " fabric.nodeId=0x" ChipLogFormatX64, |
| fabricDescriptor.vendorID, ChipLogValueX64(fabricDescriptor.fabricID), |
| ChipLogValueX64(fabricDescriptor.nodeID)); |
| if (GetFabricId() == fabricDescriptor.fabricID) |
| { |
| ChipLogProgress(Controller, "DeviceCommissioner::OnDone - found a matching fabric id"); |
| chip::ByteSpan rootKeySpan = fabricDescriptor.rootPublicKey; |
| if (rootKeySpan.size() != Crypto::kP256_PublicKey_Length) |
| { |
| ChipLogError(Controller, "DeviceCommissioner::OnDone - fabric root key size mismatch %u != %u", |
| static_cast<unsigned>(rootKeySpan.size()), |
| static_cast<unsigned>(Crypto::kP256_PublicKey_Length)); |
| continue; |
| } |
| P256PublicKeySpan rootPubKeySpan(rootKeySpan.data()); |
| Crypto::P256PublicKey deviceRootPublicKey(rootPubKeySpan); |
| |
| Crypto::P256PublicKey commissionerRootPublicKey; |
| if (CHIP_NO_ERROR != GetRootPublicKey(commissionerRootPublicKey)) |
| { |
| ChipLogError(Controller, "DeviceCommissioner::OnDone - error reading commissioner root public key"); |
| } |
| else if (commissionerRootPublicKey.Matches(deviceRootPublicKey)) |
| { |
| ChipLogProgress(Controller, "DeviceCommissioner::OnDone - fabric root keys match"); |
| info.remoteNodeId = fabricDescriptor.nodeID; |
| } |
| } |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| default: |
| return CHIP_NO_ERROR; |
| } |
| }); |
| |
| if (mPairingDelegate != nullptr) |
| { |
| mPairingDelegate->OnFabricCheck(info.remoteNodeId); |
| } |
| |
| return return_err; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ParseICDInfo(ReadCommissioningInfo & info) |
| { |
| using chip::app::Clusters::IcdManagement::UserActiveModeTriggerBitmap; |
| |
| CHIP_ERROR err; |
| IcdManagement::Attributes::FeatureMap::TypeInfo::DecodableType featureMap; |
| bool hasUserActiveModeTrigger = false; |
| bool isICD = false; |
| err = mAttributeCache->Get<IcdManagement::Attributes::FeatureMap::TypeInfo>(kRootEndpointId, featureMap); |
| if (err == CHIP_NO_ERROR) |
| { |
| info.icd.isLIT = !!(featureMap & to_underlying(IcdManagement::Feature::kLongIdleTimeSupport)); |
| info.icd.checkInProtocolSupport = !!(featureMap & to_underlying(IcdManagement::Feature::kCheckInProtocolSupport)); |
| hasUserActiveModeTrigger = !!(featureMap & to_underlying(IcdManagement::Feature::kUserActiveModeTrigger)); |
| isICD = true; |
| } |
| else if (err == CHIP_ERROR_KEY_NOT_FOUND) |
| { |
| // This key is optional so not an error |
| info.icd.isLIT = false; |
| err = CHIP_NO_ERROR; |
| } |
| else if (err == CHIP_ERROR_IM_STATUS_CODE_RECEIVED) |
| { |
| app::StatusIB statusIB; |
| err = mAttributeCache->GetStatus( |
| app::ConcreteAttributePath(kRootEndpointId, IcdManagement::Id, IcdManagement::Attributes::FeatureMap::Id), statusIB); |
| if (err == CHIP_NO_ERROR) |
| { |
| if (statusIB.mStatus == Protocols::InteractionModel::Status::UnsupportedCluster) |
| { |
| info.icd.isLIT = false; |
| } |
| else |
| { |
| err = statusIB.ToChipError(); |
| } |
| } |
| } |
| |
| ReturnErrorOnFailure(err); |
| |
| info.icd.userActiveModeTriggerHint.ClearAll(); |
| info.icd.userActiveModeTriggerInstruction = CharSpan(); |
| |
| if (hasUserActiveModeTrigger) |
| { |
| // Intentionally ignore errors since they are not mandatory. |
| bool activeModeTriggerInstructionRequired = false; |
| |
| err = mAttributeCache->Get<IcdManagement::Attributes::UserActiveModeTriggerHint::TypeInfo>( |
| kRootEndpointId, info.icd.userActiveModeTriggerHint); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "IcdManagement.UserActiveModeTriggerHint expected, but failed to read."); |
| return err; |
| } |
| |
| activeModeTriggerInstructionRequired = info.icd.userActiveModeTriggerHint.HasAny( |
| UserActiveModeTriggerBitmap::kCustomInstruction, UserActiveModeTriggerBitmap::kActuateSensorSeconds, |
| UserActiveModeTriggerBitmap::kActuateSensorTimes, UserActiveModeTriggerBitmap::kActuateSensorLightsBlink, |
| UserActiveModeTriggerBitmap::kResetButtonLightsBlink, UserActiveModeTriggerBitmap::kResetButtonSeconds, |
| UserActiveModeTriggerBitmap::kResetButtonTimes, UserActiveModeTriggerBitmap::kSetupButtonSeconds, |
| UserActiveModeTriggerBitmap::kSetupButtonTimes, UserActiveModeTriggerBitmap::kSetupButtonTimes, |
| UserActiveModeTriggerBitmap::kAppDefinedButton); |
| |
| if (activeModeTriggerInstructionRequired) |
| { |
| err = mAttributeCache->Get<IcdManagement::Attributes::UserActiveModeTriggerInstruction::TypeInfo>( |
| kRootEndpointId, info.icd.userActiveModeTriggerInstruction); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, |
| "IcdManagement.UserActiveModeTriggerInstruction expected for given active mode trigger hint, but " |
| "failed to read."); |
| return err; |
| } |
| } |
| } |
| |
| if (!isICD) |
| { |
| info.icd.idleModeDuration = 0; |
| info.icd.activeModeDuration = 0; |
| info.icd.activeModeThreshold = 0; |
| return CHIP_NO_ERROR; |
| } |
| |
| err = mAttributeCache->Get<IcdManagement::Attributes::IdleModeDuration::TypeInfo>(kRootEndpointId, info.icd.idleModeDuration); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "IcdManagement.IdleModeDuration expected, but failed to read: %" CHIP_ERROR_FORMAT, err.Format()); |
| return err; |
| } |
| err = |
| mAttributeCache->Get<IcdManagement::Attributes::ActiveModeDuration::TypeInfo>(kRootEndpointId, info.icd.activeModeDuration); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "IcdManagement.ActiveModeDuration expected, but failed to read: %" CHIP_ERROR_FORMAT, |
| err.Format()); |
| return err; |
| } |
| |
| err = mAttributeCache->Get<IcdManagement::Attributes::ActiveModeThreshold::TypeInfo>(kRootEndpointId, |
| info.icd.activeModeThreshold); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "IcdManagement.ActiveModeThreshold expected, but failed to read: %" CHIP_ERROR_FORMAT, |
| err.Format()); |
| } |
| |
| return err; |
| } |
| |
| void DeviceCommissioner::OnArmFailSafe(void * context, |
| const GeneralCommissioning::Commands::ArmFailSafeResponse::DecodableType & data) |
| { |
| CommissioningDelegate::CommissioningReport report; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| ChipLogProgress(Controller, "Received ArmFailSafe response errorCode=%u", to_underlying(data.errorCode)); |
| if (data.errorCode != GeneralCommissioning::CommissioningErrorEnum::kOk) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| report.Set<CommissioningErrorInfo>(data.errorCode); |
| } |
| |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(err, report); |
| } |
| |
| void DeviceCommissioner::OnSetRegulatoryConfigResponse( |
| void * context, const GeneralCommissioning::Commands::SetRegulatoryConfigResponse::DecodableType & data) |
| { |
| CommissioningDelegate::CommissioningReport report; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| ChipLogProgress(Controller, "Received SetRegulatoryConfig response errorCode=%u", to_underlying(data.errorCode)); |
| if (data.errorCode != GeneralCommissioning::CommissioningErrorEnum::kOk) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| report.Set<CommissioningErrorInfo>(data.errorCode); |
| } |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(err, report); |
| } |
| |
| void DeviceCommissioner::OnSetTimeZoneResponse(void * context, |
| const TimeSynchronization::Commands::SetTimeZoneResponse::DecodableType & data) |
| { |
| CommissioningDelegate::CommissioningReport report; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| TimeZoneResponseInfo info; |
| info.requiresDSTOffsets = data.DSTOffsetRequired; |
| report.Set<TimeZoneResponseInfo>(info); |
| commissioner->CommissioningStageComplete(err, report); |
| } |
| |
| void DeviceCommissioner::OnSetUTCError(void * context, CHIP_ERROR error) |
| { |
| // For SetUTCTime, we don't actually care if the commissionee didn't want out time, that's its choice |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR); |
| } |
| |
| void DeviceCommissioner::OnScanNetworksFailure(void * context, CHIP_ERROR error) |
| { |
| ChipLogProgress(Controller, "Received ScanNetworks failure response %" CHIP_ERROR_FORMAT, error.Format()); |
| |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| |
| // advance to the kNeedsNetworkCreds waiting step |
| // clear error so that we don't abort the commissioning when ScanNetworks fails |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR); |
| |
| if (commissioner->GetPairingDelegate() != nullptr) |
| { |
| commissioner->GetPairingDelegate()->OnScanNetworksFailure(error); |
| } |
| } |
| |
| void DeviceCommissioner::OnScanNetworksResponse(void * context, |
| const NetworkCommissioning::Commands::ScanNetworksResponse::DecodableType & data) |
| { |
| CommissioningDelegate::CommissioningReport report; |
| |
| ChipLogProgress(Controller, "Received ScanNetwork response, networkingStatus=%u debugText=%s", |
| to_underlying(data.networkingStatus), |
| (data.debugText.HasValue() ? std::string(data.debugText.Value().data(), data.debugText.Value().size()).c_str() |
| : "none provided")); |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| |
| // advance to the kNeedsNetworkCreds waiting step |
| commissioner->CommissioningStageComplete(CHIP_NO_ERROR); |
| |
| if (commissioner->GetPairingDelegate() != nullptr) |
| { |
| commissioner->GetPairingDelegate()->OnScanNetworksSuccess(data); |
| } |
| } |
| |
| CHIP_ERROR DeviceCommissioner::NetworkCredentialsReady() |
| { |
| ReturnErrorCodeIf(mCommissioningStage != CommissioningStage::kNeedsNetworkCreds, CHIP_ERROR_INCORRECT_STATE); |
| |
| // need to advance to next step |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR DeviceCommissioner::ICDRegistrationInfoReady() |
| { |
| ReturnErrorCodeIf(mCommissioningStage != CommissioningStage::kICDGetRegistrationInfo, CHIP_ERROR_INCORRECT_STATE); |
| |
| // need to advance to next step |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void DeviceCommissioner::OnNetworkConfigResponse(void * context, |
| const NetworkCommissioning::Commands::NetworkConfigResponse::DecodableType & data) |
| { |
| CommissioningDelegate::CommissioningReport report; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| ChipLogProgress(Controller, "Received NetworkConfig response, networkingStatus=%u", to_underlying(data.networkingStatus)); |
| if (data.networkingStatus != NetworkCommissioning::NetworkCommissioningStatusEnum::kSuccess) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| report.Set<NetworkCommissioningStatusInfo>(data.networkingStatus); |
| } |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(err, report); |
| } |
| |
| void DeviceCommissioner::OnConnectNetworkResponse( |
| void * context, const NetworkCommissioning::Commands::ConnectNetworkResponse::DecodableType & data) |
| { |
| CommissioningDelegate::CommissioningReport report; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| ChipLogProgress(Controller, "Received ConnectNetwork response, networkingStatus=%u", to_underlying(data.networkingStatus)); |
| if (data.networkingStatus != NetworkCommissioning::NetworkCommissioningStatusEnum::kSuccess) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| report.Set<NetworkCommissioningStatusInfo>(data.networkingStatus); |
| } |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(err, report); |
| } |
| |
| void DeviceCommissioner::OnCommissioningCompleteResponse( |
| void * context, const GeneralCommissioning::Commands::CommissioningCompleteResponse::DecodableType & data) |
| { |
| CommissioningDelegate::CommissioningReport report; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| ChipLogProgress(Controller, "Received CommissioningComplete response, errorCode=%u", to_underlying(data.errorCode)); |
| if (data.errorCode != GeneralCommissioning::CommissioningErrorEnum::kOk) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| report.Set<CommissioningErrorInfo>(data.errorCode); |
| } |
| DeviceCommissioner * commissioner = static_cast<DeviceCommissioner *>(context); |
| commissioner->CommissioningStageComplete(err, report); |
| } |
| |
| template <typename RequestObjectT> |
| CHIP_ERROR |
| DeviceCommissioner::SendCommissioningCommand(DeviceProxy * device, const RequestObjectT & request, |
| CommandResponseSuccessCallback<typename RequestObjectT::ResponseType> successCb, |
| CommandResponseFailureCallback failureCb, EndpointId endpoint, |
| Optional<System::Clock::Timeout> timeout, bool fireAndForget) |
| |
| { |
| // Default behavior is to make sequential, cancellable calls tracked via mInvokeCancelFn. |
| // Fire-and-forget calls are not cancellable and don't receive `this` as context in callbacks. |
| VerifyOrDie(fireAndForget || !mInvokeCancelFn); // we don't make parallel (cancellable) calls |
| |
| void * context = (!fireAndForget) ? this : nullptr; |
| auto onSuccessCb = [context, successCb](const app::ConcreteCommandPath & aPath, const app::StatusIB & aStatus, |
| const typename RequestObjectT::ResponseType & responseData) { |
| successCb(context, responseData); |
| }; |
| auto onFailureCb = [context, failureCb](CHIP_ERROR aError) { failureCb(context, aError); }; |
| |
| return InvokeCommandRequest(device->GetExchangeManager(), device->GetSecureSession().Value(), endpoint, request, onSuccessCb, |
| onFailureCb, NullOptional, timeout, (!fireAndForget) ? &mInvokeCancelFn : nullptr); |
| } |
| |
| template <typename AttrType> |
| CHIP_ERROR DeviceCommissioner::SendCommissioningWriteRequest(DeviceProxy * device, EndpointId endpoint, ClusterId cluster, |
| AttributeId attribute, const AttrType & requestData, |
| WriteResponseSuccessCallback successCb, |
| WriteResponseFailureCallback failureCb) |
| { |
| VerifyOrDie(!mWriteCancelFn); // we don't make parallel (cancellable) calls |
| auto onSuccessCb = [this, successCb](const app::ConcreteAttributePath & aPath) { successCb(this); }; |
| auto onFailureCb = [this, failureCb](const app::ConcreteAttributePath * aPath, CHIP_ERROR aError) { failureCb(this, aError); }; |
| return WriteAttribute(device->GetSecureSession().Value(), endpoint, cluster, attribute, requestData, onSuccessCb, onFailureCb, |
| /* aTimedWriteTimeoutMs = */ NullOptional, /* onDoneCb = */ nullptr, /* aDataVersion = */ NullOptional, |
| /* outCancelFn = */ &mWriteCancelFn); |
| } |
| |
| void DeviceCommissioner::SendCommissioningReadRequest(DeviceProxy * proxy, Optional<System::Clock::Timeout> timeout, |
| app::AttributePathParams * readPaths, size_t readPathsSize) |
| { |
| VerifyOrDie(!mReadClient); // we don't perform parallel reads |
| |
| app::InteractionModelEngine * engine = app::InteractionModelEngine::GetInstance(); |
| app::ReadPrepareParams readParams(proxy->GetSecureSession().Value()); |
| readParams.mIsFabricFiltered = false; |
| if (timeout.HasValue()) |
| { |
| readParams.mTimeout = timeout.Value(); |
| } |
| readParams.mpAttributePathParamsList = readPaths; |
| readParams.mAttributePathParamsListSize = readPathsSize; |
| |
| // Take ownership of the attribute cache, so it can be released when SendRequest fails. |
| auto attributeCache = std::move(mAttributeCache); |
| auto readClient = chip::Platform::MakeUnique<app::ReadClient>( |
| engine, proxy->GetExchangeManager(), attributeCache->GetBufferedCallback(), app::ReadClient::InteractionType::Read); |
| CHIP_ERROR err = readClient->SendRequest(readParams); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Failed to send read request: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| mAttributeCache = std::move(attributeCache); |
| mReadClient = std::move(readClient); |
| } |
| |
| void DeviceCommissioner::PerformCommissioningStep(DeviceProxy * proxy, CommissioningStage step, CommissioningParameters & params, |
| CommissioningDelegate * delegate, EndpointId endpoint, |
| Optional<System::Clock::Timeout> timeout) |
| |
| { |
| MATTER_LOG_METRIC(kMetricDeviceCommissionerCommissionStage, step); |
| MATTER_LOG_METRIC_BEGIN(MetricKeyForCommissioningStage(step)); |
| |
| if (params.GetCompletionStatus().err == CHIP_NO_ERROR) |
| { |
| ChipLogProgress(Controller, "Performing next commissioning step '%s'", StageToString(step)); |
| } |
| else |
| { |
| ChipLogProgress(Controller, "Performing next commissioning step '%s' with completion status = '%s'", StageToString(step), |
| params.GetCompletionStatus().err.AsString()); |
| } |
| |
| mCommissioningStage = step; |
| mCommissioningDelegate = delegate; |
| mDeviceBeingCommissioned = proxy; |
| |
| // TODO: Extend timeouts to the DAC and Opcert requests. |
| // TODO(cecille): We probably want something better than this for breadcrumbs. |
| uint64_t breadcrumb = static_cast<uint64_t>(step); |
| |
| switch (step) |
| { |
| case CommissioningStage::kArmFailsafe: { |
| VerifyOrDie(endpoint == kRootEndpointId); |
| // Make sure the fail-safe value we set here actually ends up being used |
| // no matter what. |
| proxy->SetFailSafeExpirationTimestamp(System::Clock::kZero); |
| VerifyOrDie(ExtendArmFailSafeInternal(proxy, step, params.GetFailsafeTimerSeconds().ValueOr(kDefaultFailsafeTimeout), |
| timeout, OnArmFailSafe, OnBasicFailure, /* fireAndForget = */ false)); |
| } |
| break; |
| case CommissioningStage::kReadCommissioningInfo: { |
| ChipLogProgress(Controller, "Sending read request for commissioning information"); |
| // Allocate a new ClusterStateCache when starting reading the first batch of attributes. |
| // The cache will be released in: |
| // - SendCommissioningReadRequest when failing to send a read request. |
| // - ParseCommissioningInfo when the last ReadCommissioningInfo stage is completed. |
| // Currently, we have two ReadCommissioningInfo* stages. |
| mAttributeCache = Platform::MakeUnique<app::ClusterStateCache>(*this); |
| |
| // NOTE: this array cannot have more than 9 entries, since the spec mandates that server only needs to support 9 |
| // See R1.1, 2.11.2 Interaction Model Limits |
| app::AttributePathParams readPaths[9]; |
| // Read all the feature maps for all the networking clusters on any endpoint to determine what is supported |
| readPaths[0] = app::AttributePathParams(app::Clusters::NetworkCommissioning::Id, |
| app::Clusters::NetworkCommissioning::Attributes::FeatureMap::Id); |
| // Get required general commissioning attributes on this endpoint (recommended failsafe time, regulatory location |
| // info, breadcrumb) |
| readPaths[1] = app::AttributePathParams(endpoint, app::Clusters::GeneralCommissioning::Id, |
| app::Clusters::GeneralCommissioning::Attributes::Breadcrumb::Id); |
| readPaths[2] = app::AttributePathParams(endpoint, app::Clusters::GeneralCommissioning::Id, |
| app::Clusters::GeneralCommissioning::Attributes::BasicCommissioningInfo::Id); |
| readPaths[3] = app::AttributePathParams(endpoint, app::Clusters::GeneralCommissioning::Id, |
| app::Clusters::GeneralCommissioning::Attributes::RegulatoryConfig::Id); |
| readPaths[4] = app::AttributePathParams(endpoint, app::Clusters::GeneralCommissioning::Id, |
| app::Clusters::GeneralCommissioning::Attributes::LocationCapability::Id); |
| // Read attributes from the basic info cluster (vendor id / product id / software version) |
| readPaths[5] = app::AttributePathParams(endpoint, app::Clusters::BasicInformation::Id, |
| app::Clusters::BasicInformation::Attributes::VendorID::Id); |
| readPaths[6] = app::AttributePathParams(endpoint, app::Clusters::BasicInformation::Id, |
| app::Clusters::BasicInformation::Attributes::ProductID::Id); |
| // Read the requested minimum connection times from all network commissioning clusters |
| readPaths[7] = app::AttributePathParams(app::Clusters::NetworkCommissioning::Id, |
| app::Clusters::NetworkCommissioning::Attributes::ConnectMaxTimeSeconds::Id); |
| // Read everything from the time cluster so we can assess what information needs to be set. |
| readPaths[8] = app::AttributePathParams(endpoint, app::Clusters::TimeSynchronization::Id); |
| |
| SendCommissioningReadRequest(proxy, timeout, readPaths, 9); |
| } |
| break; |
| case CommissioningStage::kReadCommissioningInfo2: { |
| size_t numberOfAttributes = 0; |
| // This is done in a separate step since we've already used up all the available read paths in the previous read step |
| // NOTE: this array cannot have more than 9 entries, since the spec mandates that server only needs to support 9 |
| // See R1.1, 2.11.2 Interaction Model Limits |
| |
| // Currently, we have at most 8 attributes to read in this stage. |
| app::AttributePathParams readPaths[8]; |
| |
| // Mandatory attribute |
| readPaths[numberOfAttributes++] = |
| app::AttributePathParams(endpoint, app::Clusters::GeneralCommissioning::Id, |
| app::Clusters::GeneralCommissioning::Attributes::SupportsConcurrentConnection::Id); |
| |
| // Read the current fabrics |
| if (params.GetCheckForMatchingFabric()) |
| { |
| readPaths[numberOfAttributes++] = |
| app::AttributePathParams(OperationalCredentials::Id, OperationalCredentials::Attributes::Fabrics::Id); |
| } |
| |
| if (params.GetICDRegistrationStrategy() != ICDRegistrationStrategy::kIgnore) |
| { |
| readPaths[numberOfAttributes++] = |
| app::AttributePathParams(endpoint, IcdManagement::Id, IcdManagement::Attributes::FeatureMap::Id); |
| } |
| |
| // Always read the active mode trigger hint attributes to notify users about it. |
| readPaths[numberOfAttributes++] = |
| app::AttributePathParams(endpoint, IcdManagement::Id, IcdManagement::Attributes::UserActiveModeTriggerHint::Id); |
| readPaths[numberOfAttributes++] = |
| app::AttributePathParams(endpoint, IcdManagement::Id, IcdManagement::Attributes::UserActiveModeTriggerInstruction::Id); |
| readPaths[numberOfAttributes++] = |
| app::AttributePathParams(endpoint, IcdManagement::Id, IcdManagement::Attributes::IdleModeDuration::Id); |
| readPaths[numberOfAttributes++] = |
| app::AttributePathParams(endpoint, IcdManagement::Id, IcdManagement::Attributes::ActiveModeDuration::Id); |
| readPaths[numberOfAttributes++] = |
| app::AttributePathParams(endpoint, IcdManagement::Id, IcdManagement::Attributes::ActiveModeThreshold::Id); |
| SendCommissioningReadRequest(proxy, timeout, readPaths, numberOfAttributes); |
| } |
| break; |
| case CommissioningStage::kConfigureUTCTime: { |
| TimeSynchronization::Commands::SetUTCTime::Type request; |
| uint64_t kChipEpochUsSinceUnixEpoch = static_cast<uint64_t>(kChipEpochSecondsSinceUnixEpoch) * chip::kMicrosecondsPerSecond; |
| System::Clock::Microseconds64 utcTime; |
| if (System::SystemClock().GetClock_RealTime(utcTime) != CHIP_NO_ERROR || utcTime.count() <= kChipEpochUsSinceUnixEpoch) |
| { |
| // We have no time to give, but that's OK, just complete this stage |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| return; |
| } |
| |
| request.UTCTime = utcTime.count() - kChipEpochUsSinceUnixEpoch; |
| // For now, we assume a seconds granularity |
| request.granularity = TimeSynchronization::GranularityEnum::kSecondsGranularity; |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnBasicSuccess, OnSetUTCError, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send SetUTCTime command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kConfigureTimeZone: { |
| if (!params.GetTimeZone().HasValue()) |
| { |
| ChipLogError(Controller, "ConfigureTimeZone stage called with no time zone data"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| TimeSynchronization::Commands::SetTimeZone::Type request; |
| request.timeZone = params.GetTimeZone().Value(); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnSetTimeZoneResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send SetTimeZone command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kConfigureDSTOffset: { |
| if (!params.GetDSTOffsets().HasValue()) |
| { |
| ChipLogError(Controller, "ConfigureDSTOffset stage called with no DST data"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| TimeSynchronization::Commands::SetDSTOffset::Type request; |
| request.DSTOffset = params.GetDSTOffsets().Value(); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnBasicSuccess, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send SetDSTOffset command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kConfigureDefaultNTP: { |
| if (!params.GetDefaultNTP().HasValue()) |
| { |
| ChipLogError(Controller, "ConfigureDefaultNTP stage called with no default NTP data"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| TimeSynchronization::Commands::SetDefaultNTP::Type request; |
| request.defaultNTP = params.GetDefaultNTP().Value(); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnBasicSuccess, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send SetDefaultNTP command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kScanNetworks: { |
| NetworkCommissioning::Commands::ScanNetworks::Type request; |
| if (params.GetWiFiCredentials().HasValue()) |
| { |
| request.ssid.Emplace(params.GetWiFiCredentials().Value().ssid); |
| } |
| request.breadcrumb.Emplace(breadcrumb); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnScanNetworksResponse, OnScanNetworksFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send ScanNetworks command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kNeedsNetworkCreds: { |
| // nothing to do, the OnScanNetworksSuccess and OnScanNetworksFailure callbacks provide indication to the |
| // DevicePairingDelegate that network credentials are needed. |
| break; |
| } |
| case CommissioningStage::kConfigRegulatory: { |
| // TODO(cecille): Worthwhile to keep this around as part of the class? |
| // TODO(cecille): Where is the country config actually set? |
| ChipLogProgress(Controller, "Setting Regulatory Config"); |
| auto capability = |
| params.GetLocationCapability().ValueOr(app::Clusters::GeneralCommissioning::RegulatoryLocationTypeEnum::kOutdoor); |
| app::Clusters::GeneralCommissioning::RegulatoryLocationTypeEnum regulatoryConfig; |
| // Value is only switchable on the devices with indoor/outdoor capability |
| if (capability == app::Clusters::GeneralCommissioning::RegulatoryLocationTypeEnum::kIndoorOutdoor) |
| { |
| // If the device supports indoor and outdoor configs, use the setting from the commissioner, otherwise fall back to |
| // the current device setting then to outdoor (most restrictive) |
| if (params.GetDeviceRegulatoryLocation().HasValue()) |
| { |
| regulatoryConfig = params.GetDeviceRegulatoryLocation().Value(); |
| ChipLogProgress(Controller, "Setting regulatory config to %u from commissioner override", |
| static_cast<uint8_t>(regulatoryConfig)); |
| } |
| else if (params.GetDefaultRegulatoryLocation().HasValue()) |
| { |
| regulatoryConfig = params.GetDefaultRegulatoryLocation().Value(); |
| ChipLogProgress(Controller, "No regulatory config supplied by controller, leaving as device default (%u)", |
| static_cast<uint8_t>(regulatoryConfig)); |
| } |
| else |
| { |
| regulatoryConfig = app::Clusters::GeneralCommissioning::RegulatoryLocationTypeEnum::kOutdoor; |
| ChipLogProgress(Controller, "No overrride or device regulatory config supplied, setting to outdoor"); |
| } |
| } |
| else |
| { |
| ChipLogProgress(Controller, "Device does not support configurable regulatory location"); |
| regulatoryConfig = capability; |
| } |
| |
| CharSpan countryCode; |
| const auto & providedCountryCode = params.GetCountryCode(); |
| if (providedCountryCode.HasValue()) |
| { |
| countryCode = providedCountryCode.Value(); |
| } |
| else |
| { |
| // Default to "XX", for lack of anything better. |
| countryCode = "XX"_span; |
| } |
| |
| GeneralCommissioning::Commands::SetRegulatoryConfig::Type request; |
| request.newRegulatoryConfig = regulatoryConfig; |
| request.countryCode = countryCode; |
| request.breadcrumb = breadcrumb; |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnSetRegulatoryConfigResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send SetRegulatoryConfig command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kSendPAICertificateRequest: { |
| ChipLogProgress(Controller, "Sending request for PAI certificate"); |
| CHIP_ERROR err = SendCertificateChainRequestCommand(proxy, CertificateType::kPAI, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send CertificateChainRequest command to get PAI: %" CHIP_ERROR_FORMAT, |
| err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kSendDACCertificateRequest: { |
| ChipLogProgress(Controller, "Sending request for DAC certificate"); |
| CHIP_ERROR err = SendCertificateChainRequestCommand(proxy, CertificateType::kDAC, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send CertificateChainRequest command to get DAC: %" CHIP_ERROR_FORMAT, |
| err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kSendAttestationRequest: { |
| ChipLogProgress(Controller, "Sending Attestation Request to the device."); |
| if (!params.GetAttestationNonce().HasValue()) |
| { |
| ChipLogError(Controller, "No attestation nonce found"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| CHIP_ERROR err = SendAttestationRequestCommand(proxy, params.GetAttestationNonce().Value(), timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send AttestationRequest command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kAttestationVerification: { |
| ChipLogProgress(Controller, "Verifying attestation"); |
| if (IsAttestationInformationMissing(params)) |
| { |
| ChipLogError(Controller, "Missing attestation information"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| |
| DeviceAttestationVerifier::AttestationInfo info( |
| params.GetAttestationElements().Value(), |
| proxy->GetSecureSession().Value()->AsSecureSession()->GetCryptoContext().GetAttestationChallenge(), |
| params.GetAttestationSignature().Value(), params.GetPAI().Value(), params.GetDAC().Value(), |
| params.GetAttestationNonce().Value(), params.GetRemoteVendorId().Value(), params.GetRemoteProductId().Value()); |
| |
| if (ValidateAttestationInfo(info) != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Error validating attestation information"); |
| CommissioningStageComplete(CHIP_ERROR_FAILED_DEVICE_ATTESTATION); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kAttestationRevocationCheck: { |
| ChipLogProgress(Controller, "Verifying device's DAC chain revocation status"); |
| if (IsAttestationInformationMissing(params)) |
| { |
| ChipLogError(Controller, "Missing attestation information"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| |
| DeviceAttestationVerifier::AttestationInfo info( |
| params.GetAttestationElements().Value(), |
| proxy->GetSecureSession().Value()->AsSecureSession()->GetCryptoContext().GetAttestationChallenge(), |
| params.GetAttestationSignature().Value(), params.GetPAI().Value(), params.GetDAC().Value(), |
| params.GetAttestationNonce().Value(), params.GetRemoteVendorId().Value(), params.GetRemoteProductId().Value()); |
| |
| if (CheckForRevokedDACChain(info) != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Error validating device's DAC chain revocation status"); |
| CommissioningStageComplete(CHIP_ERROR_FAILED_DEVICE_ATTESTATION); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kSendOpCertSigningRequest: { |
| if (!params.GetCSRNonce().HasValue()) |
| { |
| ChipLogError(Controller, "No CSR nonce found"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| CHIP_ERROR err = SendOperationalCertificateSigningRequestCommand(proxy, params.GetCSRNonce().Value(), timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send CSR request: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kValidateCSR: { |
| if (!params.GetNOCChainGenerationParameters().HasValue() || !params.GetDAC().HasValue() || !params.GetCSRNonce().HasValue()) |
| { |
| ChipLogError(Controller, "Unable to validate CSR"); |
| return CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| } |
| // This is non-blocking, so send the callback immediately. |
| CHIP_ERROR err = ValidateCSR(proxy, params.GetNOCChainGenerationParameters().Value().nocsrElements, |
| params.GetNOCChainGenerationParameters().Value().signature, params.GetDAC().Value(), |
| params.GetCSRNonce().Value()); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Unable to validate CSR"); |
| } |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| case CommissioningStage::kGenerateNOCChain: { |
| if (!params.GetNOCChainGenerationParameters().HasValue() || !params.GetDAC().HasValue() || !params.GetPAI().HasValue() || |
| !params.GetCSRNonce().HasValue()) |
| { |
| ChipLogError(Controller, "Unable to generate NOC chain parameters"); |
| return CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| } |
| CHIP_ERROR err = ProcessCSR(proxy, params.GetNOCChainGenerationParameters().Value().nocsrElements, |
| params.GetNOCChainGenerationParameters().Value().signature, params.GetDAC().Value(), |
| params.GetPAI().Value(), params.GetCSRNonce().Value()); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Unable to process Op CSR"); |
| // Handle error, and notify session failure to the commissioner application. |
| ChipLogError(Controller, "Failed to process the certificate signing request"); |
| // TODO: Map error status to correct error code |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kSendTrustedRootCert: { |
| if (!params.GetRootCert().HasValue() || !params.GetNoc().HasValue()) |
| { |
| ChipLogError(Controller, "No trusted root cert or NOC specified"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| CHIP_ERROR err = SendTrustedRootCertificate(proxy, params.GetRootCert().Value(), timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Error sending trusted root certificate: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| |
| err = proxy->SetPeerId(params.GetRootCert().Value(), params.GetNoc().Value()); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Error setting peer id: %s", err.AsString()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| if (!IsOperationalNodeId(proxy->GetDeviceId())) |
| { |
| ChipLogError(Controller, "Given node ID is not an operational node ID"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kSendNOC: { |
| if (!params.GetNoc().HasValue() || !params.GetIpk().HasValue() || !params.GetAdminSubject().HasValue()) |
| { |
| ChipLogError(Controller, "AddNOC contents not specified"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| CHIP_ERROR err = SendOperationalCertificate(proxy, params.GetNoc().Value(), params.GetIcac(), params.GetIpk().Value(), |
| params.GetAdminSubject().Value(), timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Error sending operational certificate: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kConfigureTrustedTimeSource: { |
| if (!params.GetTrustedTimeSource().HasValue()) |
| { |
| ChipLogError(Controller, "ConfigureTrustedTimeSource stage called with no trusted time source data"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| TimeSynchronization::Commands::SetTrustedTimeSource::Type request; |
| request.trustedTimeSource = params.GetTrustedTimeSource().Value(); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnBasicSuccess, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send SendTrustedTimeSource command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kWiFiNetworkSetup: { |
| if (!params.GetWiFiCredentials().HasValue()) |
| { |
| ChipLogError(Controller, "No wifi credentials specified"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| |
| NetworkCommissioning::Commands::AddOrUpdateWiFiNetwork::Type request; |
| request.ssid = params.GetWiFiCredentials().Value().ssid; |
| request.credentials = params.GetWiFiCredentials().Value().credentials; |
| request.breadcrumb.Emplace(breadcrumb); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnNetworkConfigResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send AddOrUpdateWiFiNetwork command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kThreadNetworkSetup: { |
| if (!params.GetThreadOperationalDataset().HasValue()) |
| { |
| ChipLogError(Controller, "No thread credentials specified"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| NetworkCommissioning::Commands::AddOrUpdateThreadNetwork::Type request; |
| request.operationalDataset = params.GetThreadOperationalDataset().Value(); |
| request.breadcrumb.Emplace(breadcrumb); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnNetworkConfigResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send AddOrUpdateThreadNetwork command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kFailsafeBeforeWiFiEnable: |
| FALLTHROUGH; |
| case CommissioningStage::kFailsafeBeforeThreadEnable: |
| // Before we try to do network enablement, make sure that our fail-safe |
| // is set far enough out that we can later try to do operational |
| // discovery without it timing out. |
| ExtendFailsafeBeforeNetworkEnable(proxy, params, step); |
| break; |
| case CommissioningStage::kWiFiNetworkEnable: { |
| if (!params.GetWiFiCredentials().HasValue()) |
| { |
| ChipLogError(Controller, "No wifi credentials specified"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| NetworkCommissioning::Commands::ConnectNetwork::Type request; |
| request.networkID = params.GetWiFiCredentials().Value().ssid; |
| request.breadcrumb.Emplace(breadcrumb); |
| |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| ChipLogProgress(Controller, "SendCommand kWiFiNetworkEnable, supportsConcurrentConnection=%s", |
| params.GetSupportsConcurrentConnection().HasValue() |
| ? (params.GetSupportsConcurrentConnection().Value() ? "true" : "false") |
| : "missing"); |
| err = SendCommissioningCommand(proxy, request, OnConnectNetworkResponse, OnBasicFailure, endpoint, timeout); |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send WiFi ConnectNetwork command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kThreadNetworkEnable: { |
| ByteSpan extendedPanId; |
| chip::Thread::OperationalDataset operationalDataset; |
| if (!params.GetThreadOperationalDataset().HasValue() || |
| operationalDataset.Init(params.GetThreadOperationalDataset().Value()) != CHIP_NO_ERROR || |
| operationalDataset.GetExtendedPanIdAsByteSpan(extendedPanId) != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Unable to get extended pan ID for thread operational dataset\n"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| NetworkCommissioning::Commands::ConnectNetwork::Type request; |
| request.networkID = extendedPanId; |
| request.breadcrumb.Emplace(breadcrumb); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnConnectNetworkResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send Thread ConnectNetwork command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kICDGetRegistrationInfo: { |
| GetPairingDelegate()->OnICDRegistrationInfoRequired(); |
| return; |
| } |
| break; |
| case CommissioningStage::kICDRegistration: { |
| IcdManagement::Commands::RegisterClient::Type request; |
| |
| if (!(params.GetICDCheckInNodeId().HasValue() && params.GetICDMonitoredSubject().HasValue() && |
| params.GetICDSymmetricKey().HasValue())) |
| { |
| ChipLogError(Controller, "No ICD Registration information provided!"); |
| CommissioningStageComplete(CHIP_ERROR_INCORRECT_STATE); |
| return; |
| } |
| |
| request.checkInNodeID = params.GetICDCheckInNodeId().Value(); |
| request.monitoredSubject = params.GetICDMonitoredSubject().Value(); |
| request.key = params.GetICDSymmetricKey().Value(); |
| |
| CHIP_ERROR err = |
| SendCommissioningCommand(proxy, request, OnICDManagementRegisterClientResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send IcdManagement.RegisterClient command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kEvictPreviousCaseSessions: { |
| auto scopedPeerId = GetPeerScopedId(proxy->GetDeviceId()); |
| |
| // If we ever had a commissioned device with this node ID before, we may |
| // have stale sessions to it. Make sure we don't re-use any of those, |
| // because clearly they are not related to this new device we are |
| // commissioning. We only care about sessions we might reuse, so just |
| // clearing the ones associated with our fabric index is good enough and |
| // we don't need to worry about ExpireAllSessionsOnLogicalFabric. |
| mSystemState->SessionMgr()->ExpireAllSessions(scopedPeerId); |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| return; |
| } |
| case CommissioningStage::kFindOperationalForStayActive: |
| case CommissioningStage::kFindOperationalForCommissioningComplete: { |
| // If there is an error, CommissioningStageComplete will be called from OnDeviceConnectionFailureFn. |
| auto scopedPeerId = GetPeerScopedId(proxy->GetDeviceId()); |
| MATTER_LOG_METRIC_BEGIN(kMetricDeviceCommissioningOperationalSetup); |
| mSystemState->CASESessionMgr()->FindOrEstablishSession(scopedPeerId, &mOnDeviceConnectedCallback, |
| &mOnDeviceConnectionFailureCallback |
| #if CHIP_DEVICE_CONFIG_ENABLE_AUTOMATIC_CASE_RETRIES |
| , |
| /* attemptCount = */ 3, &mOnDeviceConnectionRetryCallback |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_AUTOMATIC_CASE_RETRIES |
| ); |
| } |
| break; |
| case CommissioningStage::kPrimaryOperationalNetworkFailed: { |
| // nothing to do. This stage indicates that the primary operational network failed and the network config should be |
| // removed later. |
| break; |
| } |
| case CommissioningStage::kRemoveWiFiNetworkConfig: { |
| NetworkCommissioning::Commands::RemoveNetwork::Type request; |
| request.networkID = params.GetWiFiCredentials().Value().ssid; |
| request.breadcrumb.Emplace(breadcrumb); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnNetworkConfigResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send RemoveNetwork command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kRemoveThreadNetworkConfig: { |
| ByteSpan extendedPanId; |
| chip::Thread::OperationalDataset operationalDataset; |
| if (!params.GetThreadOperationalDataset().HasValue() || |
| operationalDataset.Init(params.GetThreadOperationalDataset().Value()) != CHIP_NO_ERROR || |
| operationalDataset.GetExtendedPanIdAsByteSpan(extendedPanId) != CHIP_NO_ERROR) |
| { |
| ChipLogError(Controller, "Unable to get extended pan ID for thread operational dataset\n"); |
| CommissioningStageComplete(CHIP_ERROR_INVALID_ARGUMENT); |
| return; |
| } |
| NetworkCommissioning::Commands::RemoveNetwork::Type request; |
| request.networkID = extendedPanId; |
| request.breadcrumb.Emplace(breadcrumb); |
| CHIP_ERROR err = SendCommissioningCommand(proxy, request, OnNetworkConfigResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send RemoveNetwork command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| break; |
| } |
| case CommissioningStage::kICDSendStayActive: { |
| if (!(params.GetICDStayActiveDurationMsec().HasValue())) |
| { |
| ChipLogProgress(Controller, "Skipping kICDSendStayActive"); |
| CommissioningStageComplete(CHIP_NO_ERROR); |
| return; |
| } |
| |
| // StayActive Command happens over CASE Connection |
| IcdManagement::Commands::StayActiveRequest::Type request; |
| request.stayActiveDuration = params.GetICDStayActiveDurationMsec().Value(); |
| ChipLogError(Controller, "Send ICD StayActive with Duration %u", request.stayActiveDuration); |
| CHIP_ERROR err = |
| SendCommissioningCommand(proxy, request, OnICDManagementStayActiveResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send IcdManagement.StayActive command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kSendComplete: { |
| // CommissioningComplete command happens over the CASE connection. |
| GeneralCommissioning::Commands::CommissioningComplete::Type request; |
| CHIP_ERROR err = |
| SendCommissioningCommand(proxy, request, OnCommissioningCompleteResponse, OnBasicFailure, endpoint, timeout); |
| if (err != CHIP_NO_ERROR) |
| { |
| // We won't get any async callbacks here, so just complete our stage. |
| ChipLogError(Controller, "Failed to send CommissioningComplete command: %" CHIP_ERROR_FORMAT, err.Format()); |
| CommissioningStageComplete(err); |
| return; |
| } |
| } |
| break; |
| case CommissioningStage::kCleanup: |
| CleanupCommissioning(proxy, proxy->GetDeviceId(), params.GetCompletionStatus()); |
| break; |
| case CommissioningStage::kError: |
| mCommissioningStage = CommissioningStage::kSecurePairing; |
| break; |
| case CommissioningStage::kSecurePairing: |
| break; |
| } |
| } |
| |
| void DeviceCommissioner::ExtendFailsafeBeforeNetworkEnable(DeviceProxy * device, CommissioningParameters & params, |
| CommissioningStage step) |
| { |
| auto * commissioneeDevice = FindCommissioneeDevice(device->GetDeviceId()); |
| if (device != commissioneeDevice) |
| { |
| // Not a commissionee device; just return. |
| ChipLogError(Controller, "Trying to extend fail-safe for an unknown commissionee with device id " ChipLogFormatX64, |
| ChipLogValueX64(device->GetDeviceId())); |
| CommissioningStageComplete(CHIP_ERROR_INCORRECT_STATE, CommissioningDelegate::CommissioningReport()); |
| return; |
| } |
| |
| // Try to make sure we have at least enough time for our expected |
| // commissioning bits plus the MRP retries for a Sigma1. |
| uint16_t failSafeTimeoutSecs = params.GetFailsafeTimerSeconds().ValueOr(kDefaultFailsafeTimeout); |
| auto sigma1Timeout = CASESession::ComputeSigma1ResponseTimeout(commissioneeDevice->GetPairing().GetRemoteMRPConfig()); |
| uint16_t sigma1TimeoutSecs = std::chrono::duration_cast<System::Clock::Seconds16>(sigma1Timeout).count(); |
| if (UINT16_MAX - failSafeTimeoutSecs < sigma1TimeoutSecs) |
| { |
| failSafeTimeoutSecs = UINT16_MAX; |
| } |
| else |
| { |
| failSafeTimeoutSecs = static_cast<uint16_t>(failSafeTimeoutSecs + sigma1TimeoutSecs); |
| } |
| |
| if (!ExtendArmFailSafeInternal(commissioneeDevice, step, failSafeTimeoutSecs, MakeOptional(kMinimumCommissioningStepTimeout), |
| OnArmFailSafe, OnBasicFailure, /* fireAndForget = */ false)) |
| { |
| // A false return is fine; we don't want to make the fail-safe shorter here. |
| CommissioningStageComplete(CHIP_NO_ERROR, CommissioningDelegate::CommissioningReport()); |
| } |
| } |
| |
| bool DeviceCommissioner::IsAttestationInformationMissing(const CommissioningParameters & params) |
| { |
| if (!params.GetAttestationElements().HasValue() || !params.GetAttestationSignature().HasValue() || |
| !params.GetAttestationNonce().HasValue() || !params.GetDAC().HasValue() || !params.GetPAI().HasValue() || |
| !params.GetRemoteVendorId().HasValue() || !params.GetRemoteProductId().HasValue()) |
| { |
| return true; |
| } |
| |
| return false; |
| } |
| |
| CHIP_ERROR DeviceController::GetCompressedFabricIdBytes(MutableByteSpan & outBytes) const |
| { |
| const auto * fabricInfo = GetFabricInfo(); |
| VerifyOrReturnError(fabricInfo != nullptr, CHIP_ERROR_INVALID_FABRIC_INDEX); |
| return fabricInfo->GetCompressedFabricIdBytes(outBytes); |
| } |
| |
| CHIP_ERROR DeviceController::GetRootPublicKey(Crypto::P256PublicKey & outRootPublicKey) const |
| { |
| const auto * fabricTable = GetFabricTable(); |
| VerifyOrReturnError(fabricTable != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| return fabricTable->FetchRootPubkey(mFabricIndex, outRootPublicKey); |
| } |
| |
| } // namespace Controller |
| } // namespace chip |