| /* |
| * Copyright (c) 2020 Project CHIP Authors |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| */ |
| |
| #include "PairingCommand.h" |
| #include "platform/PlatformManager.h" |
| #include <commands/common/DeviceScanner.h> |
| #include <controller/ExampleOperationalCredentialsIssuer.h> |
| #include <crypto/CHIPCryptoPAL.h> |
| #include <lib/core/CHIPSafeCasts.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| #include <protocols/secure_channel/PASESession.h> |
| |
| #include <setup_payload/ManualSetupPayloadParser.h> |
| #include <setup_payload/QRCodeSetupPayloadParser.h> |
| |
| #include <string> |
| |
| using namespace ::chip; |
| using namespace ::chip::Controller; |
| |
| CHIP_ERROR PairingCommand::RunCommand() |
| { |
| CurrentCommissioner().RegisterPairingDelegate(this); |
| // Clear the CATs in OperationalCredentialsIssuer |
| mCredIssuerCmds->SetCredentialIssuerCATValues(kUndefinedCATs); |
| |
| mDeviceIsICD = false; |
| |
| if (mCASEAuthTags.HasValue() && mCASEAuthTags.Value().size() <= kMaxSubjectCATAttributeCount) |
| { |
| CATValues cats = kUndefinedCATs; |
| for (size_t index = 0; index < mCASEAuthTags.Value().size(); ++index) |
| { |
| cats.values[index] = mCASEAuthTags.Value()[index]; |
| } |
| if (cats.AreValid()) |
| { |
| mCredIssuerCmds->SetCredentialIssuerCATValues(cats); |
| } |
| } |
| return RunInternal(mNodeId); |
| } |
| |
| CHIP_ERROR PairingCommand::RunInternal(NodeId remoteId) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| switch (mPairingMode) |
| { |
| case PairingMode::None: |
| err = Unpair(remoteId); |
| break; |
| case PairingMode::Code: |
| err = PairWithCode(remoteId); |
| break; |
| case PairingMode::CodePaseOnly: |
| err = PaseWithCode(remoteId); |
| break; |
| case PairingMode::Ble: |
| err = Pair(remoteId, PeerAddress::BLE()); |
| break; |
| case PairingMode::OnNetwork: |
| err = PairWithMdns(remoteId); |
| break; |
| case PairingMode::SoftAP: |
| err = Pair(remoteId, PeerAddress::UDP(mRemoteAddr.address, mRemotePort, mRemoteAddr.interfaceId)); |
| break; |
| case PairingMode::AlreadyDiscovered: |
| err = Pair(remoteId, PeerAddress::UDP(mRemoteAddr.address, mRemotePort, mRemoteAddr.interfaceId)); |
| break; |
| case PairingMode::AlreadyDiscoveredByIndex: |
| err = PairWithMdnsOrBleByIndex(remoteId, mIndex); |
| break; |
| case PairingMode::AlreadyDiscoveredByIndexWithCode: |
| err = PairWithMdnsOrBleByIndexWithCode(remoteId, mIndex); |
| break; |
| } |
| |
| return err; |
| } |
| |
| CommissioningParameters PairingCommand::GetCommissioningParameters() |
| { |
| auto params = CommissioningParameters(); |
| params.SetSkipCommissioningComplete(mSkipCommissioningComplete.ValueOr(false)); |
| if (mBypassAttestationVerifier.ValueOr(false)) |
| { |
| params.SetDeviceAttestationDelegate(this); |
| } |
| |
| switch (mNetworkType) |
| { |
| case PairingNetworkType::WiFi: |
| params.SetWiFiCredentials(Controller::WiFiCredentials(mSSID, mPassword)); |
| break; |
| case PairingNetworkType::Thread: |
| params.SetThreadOperationalDataset(mOperationalDataset); |
| break; |
| case PairingNetworkType::None: |
| break; |
| } |
| |
| if (mCountryCode.HasValue()) |
| { |
| params.SetCountryCode(CharSpan::fromCharString(mCountryCode.Value())); |
| } |
| |
| // mTimeZoneList is an optional argument managed by TypedComplexArgument mComplex_TimeZones. |
| // Since optional Complex arguments are not currently supported via the <chip::Optional> class, |
| // we will use mTimeZoneList.data() value to determine if the argument was provided. |
| if (mTimeZoneList.data()) |
| { |
| params.SetTimeZone(mTimeZoneList); |
| } |
| |
| // miDSTOffsetList is an optional argument managed by TypedComplexArgument mComplex_DSTOffsets. |
| // Since optional Complex arguments are not currently supported via the <chip::Optional> class, |
| // we will use mTimeZoneList.data() value to determine if the argument was provided. |
| if (mDSTOffsetList.data()) |
| { |
| params.SetDSTOffsets(mDSTOffsetList); |
| } |
| |
| if (mICDRegistration.ValueOr(false)) |
| { |
| params.SetICDRegistrationStrategy(ICDRegistrationStrategy::kBeforeComplete); |
| |
| if (!mICDSymmetricKey.HasValue()) |
| { |
| chip::Crypto::DRBG_get_bytes(mRandomGeneratedICDSymmetricKey, sizeof(mRandomGeneratedICDSymmetricKey)); |
| mICDSymmetricKey.SetValue(ByteSpan(mRandomGeneratedICDSymmetricKey)); |
| } |
| if (!mICDCheckInNodeId.HasValue()) |
| { |
| mICDCheckInNodeId.SetValue(CurrentCommissioner().GetNodeId()); |
| } |
| if (!mICDMonitoredSubject.HasValue()) |
| { |
| mICDMonitoredSubject.SetValue(mICDCheckInNodeId.Value()); |
| } |
| // These Optionals must have values now. |
| // The commissioner will verify these values. |
| params.SetICDSymmetricKey(mICDSymmetricKey.Value()); |
| if (mICDStayActiveDurationMsec.HasValue()) |
| { |
| params.SetICDStayActiveDurationMsec(mICDStayActiveDurationMsec.Value()); |
| } |
| params.SetICDCheckInNodeId(mICDCheckInNodeId.Value()); |
| params.SetICDMonitoredSubject(mICDMonitoredSubject.Value()); |
| } |
| |
| return params; |
| } |
| |
| CHIP_ERROR PairingCommand::PaseWithCode(NodeId remoteId) |
| { |
| auto discoveryType = DiscoveryType::kAll; |
| if (mUseOnlyOnNetworkDiscovery.ValueOr(false)) |
| { |
| discoveryType = DiscoveryType::kDiscoveryNetworkOnly; |
| } |
| |
| if (mDiscoverOnce.ValueOr(false)) |
| { |
| discoveryType = DiscoveryType::kDiscoveryNetworkOnlyWithoutPASEAutoRetry; |
| } |
| |
| return CurrentCommissioner().EstablishPASEConnection(remoteId, mOnboardingPayload, discoveryType); |
| } |
| |
| CHIP_ERROR PairingCommand::PairWithCode(NodeId remoteId) |
| { |
| CommissioningParameters commissioningParams = GetCommissioningParameters(); |
| |
| // If no network discovery behavior and no network credentials are provided, assume that the pairing command is trying to pair |
| // with an on-network device. |
| if (!mUseOnlyOnNetworkDiscovery.HasValue()) |
| { |
| auto threadCredentials = commissioningParams.GetThreadOperationalDataset(); |
| auto wiFiCredentials = commissioningParams.GetWiFiCredentials(); |
| mUseOnlyOnNetworkDiscovery.SetValue(!threadCredentials.HasValue() && !wiFiCredentials.HasValue()); |
| } |
| |
| auto discoveryType = DiscoveryType::kAll; |
| if (mUseOnlyOnNetworkDiscovery.ValueOr(false)) |
| { |
| discoveryType = DiscoveryType::kDiscoveryNetworkOnly; |
| } |
| |
| if (mDiscoverOnce.ValueOr(false)) |
| { |
| discoveryType = DiscoveryType::kDiscoveryNetworkOnlyWithoutPASEAutoRetry; |
| } |
| |
| return CurrentCommissioner().PairDevice(remoteId, mOnboardingPayload, commissioningParams, discoveryType); |
| } |
| |
| CHIP_ERROR PairingCommand::Pair(NodeId remoteId, PeerAddress address) |
| { |
| auto params = RendezvousParameters().SetSetupPINCode(mSetupPINCode).SetDiscriminator(mDiscriminator).SetPeerAddress(address); |
| |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| if (mPaseOnly.ValueOr(false)) |
| { |
| err = CurrentCommissioner().EstablishPASEConnection(remoteId, params); |
| } |
| else |
| { |
| auto commissioningParams = GetCommissioningParameters(); |
| err = CurrentCommissioner().PairDevice(remoteId, params, commissioningParams); |
| } |
| return err; |
| } |
| |
| CHIP_ERROR PairingCommand::PairWithMdnsOrBleByIndex(NodeId remoteId, uint16_t index) |
| { |
| #if CHIP_DEVICE_LAYER_TARGET_DARWIN |
| VerifyOrReturnError(IsInteractive(), CHIP_ERROR_INCORRECT_STATE); |
| |
| RendezvousParameters params; |
| ReturnErrorOnFailure(GetDeviceScanner().Get(index, params)); |
| params.SetSetupPINCode(mSetupPINCode); |
| |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| if (mPaseOnly.ValueOr(false)) |
| { |
| err = CurrentCommissioner().EstablishPASEConnection(remoteId, params); |
| } |
| else |
| { |
| auto commissioningParams = GetCommissioningParameters(); |
| err = CurrentCommissioner().PairDevice(remoteId, params, commissioningParams); |
| } |
| return err; |
| #else |
| return CHIP_ERROR_NOT_IMPLEMENTED; |
| #endif // CHIP_DEVICE_LAYER_TARGET_DARWIN |
| } |
| |
| CHIP_ERROR PairingCommand::PairWithMdnsOrBleByIndexWithCode(NodeId remoteId, uint16_t index) |
| { |
| #if CHIP_DEVICE_LAYER_TARGET_DARWIN |
| VerifyOrReturnError(IsInteractive(), CHIP_ERROR_INCORRECT_STATE); |
| |
| Dnssd::CommonResolutionData resolutionData; |
| auto err = GetDeviceScanner().Get(index, resolutionData); |
| if (CHIP_ERROR_NOT_FOUND == err) |
| { |
| // There is no device with this index that has some resolution data. This could simply |
| // be because the device is a ble device. In this case let's fall back to looking for |
| // a device with this index and some RendezvousParameters. |
| chip::SetupPayload payload; |
| bool isQRCode = strncmp(mOnboardingPayload, kQRCodePrefix, strlen(kQRCodePrefix)) == 0; |
| if (isQRCode) |
| { |
| ReturnErrorOnFailure(QRCodeSetupPayloadParser(mOnboardingPayload).populatePayload(payload)); |
| VerifyOrReturnError(payload.isValidQRCodePayload(), CHIP_ERROR_INVALID_ARGUMENT); |
| } |
| else |
| { |
| ReturnErrorOnFailure(ManualSetupPayloadParser(mOnboardingPayload).populatePayload(payload)); |
| VerifyOrReturnError(payload.isValidManualCode(), CHIP_ERROR_INVALID_ARGUMENT); |
| } |
| |
| mSetupPINCode = payload.setUpPINCode; |
| return PairWithMdnsOrBleByIndex(remoteId, index); |
| } |
| |
| err = CHIP_NO_ERROR; |
| if (mPaseOnly.ValueOr(false)) |
| { |
| err = CurrentCommissioner().EstablishPASEConnection(remoteId, mOnboardingPayload, DiscoveryType::kDiscoveryNetworkOnly, |
| MakeOptional(resolutionData)); |
| } |
| else |
| { |
| auto commissioningParams = GetCommissioningParameters(); |
| err = CurrentCommissioner().PairDevice(remoteId, mOnboardingPayload, commissioningParams, |
| DiscoveryType::kDiscoveryNetworkOnly, MakeOptional(resolutionData)); |
| } |
| return err; |
| #else |
| return CHIP_ERROR_NOT_IMPLEMENTED; |
| #endif // CHIP_DEVICE_LAYER_TARGET_DARWIN |
| } |
| |
| CHIP_ERROR PairingCommand::PairWithMdns(NodeId remoteId) |
| { |
| Dnssd::DiscoveryFilter filter(mFilterType); |
| switch (mFilterType) |
| { |
| case chip::Dnssd::DiscoveryFilterType::kNone: |
| break; |
| case chip::Dnssd::DiscoveryFilterType::kShortDiscriminator: |
| case chip::Dnssd::DiscoveryFilterType::kLongDiscriminator: |
| case chip::Dnssd::DiscoveryFilterType::kCompressedFabricId: |
| case chip::Dnssd::DiscoveryFilterType::kVendorId: |
| case chip::Dnssd::DiscoveryFilterType::kDeviceType: |
| filter.code = mDiscoveryFilterCode; |
| break; |
| case chip::Dnssd::DiscoveryFilterType::kCommissioningMode: |
| break; |
| case chip::Dnssd::DiscoveryFilterType::kCommissioner: |
| filter.code = 1; |
| break; |
| case chip::Dnssd::DiscoveryFilterType::kInstanceName: |
| filter.code = 0; |
| filter.instanceName = mDiscoveryFilterInstanceName; |
| break; |
| } |
| |
| CurrentCommissioner().RegisterDeviceDiscoveryDelegate(this); |
| return CurrentCommissioner().DiscoverCommissionableNodes(filter); |
| } |
| |
| CHIP_ERROR PairingCommand::Unpair(NodeId remoteId) |
| { |
| mCurrentFabricRemover = Platform::MakeUnique<Controller::CurrentFabricRemover>(&CurrentCommissioner()); |
| return mCurrentFabricRemover->RemoveCurrentFabric(remoteId, &mCurrentFabricRemoveCallback); |
| } |
| |
| void PairingCommand::OnStatusUpdate(DevicePairingDelegate::Status status) |
| { |
| switch (status) |
| { |
| case DevicePairingDelegate::Status::SecurePairingSuccess: |
| ChipLogProgress(chipTool, "Secure Pairing Success"); |
| ChipLogProgress(chipTool, "CASE establishment successful"); |
| break; |
| case DevicePairingDelegate::Status::SecurePairingFailed: |
| ChipLogError(chipTool, "Secure Pairing Failed"); |
| SetCommandExitStatus(CHIP_ERROR_INCORRECT_STATE); |
| break; |
| } |
| } |
| |
| void PairingCommand::OnPairingComplete(CHIP_ERROR err) |
| { |
| if (err == CHIP_NO_ERROR) |
| { |
| ChipLogProgress(chipTool, "Pairing Success"); |
| ChipLogProgress(chipTool, "PASE establishment successful"); |
| if (mPairingMode == PairingMode::CodePaseOnly || mPaseOnly.ValueOr(false)) |
| { |
| SetCommandExitStatus(err); |
| } |
| } |
| else |
| { |
| ChipLogProgress(chipTool, "Pairing Failure: %s", ErrorStr(err)); |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| SetCommandExitStatus(err); |
| } |
| } |
| |
| void PairingCommand::OnPairingDeleted(CHIP_ERROR err) |
| { |
| if (err == CHIP_NO_ERROR) |
| { |
| ChipLogProgress(chipTool, "Pairing Deleted Success"); |
| } |
| else |
| { |
| ChipLogProgress(chipTool, "Pairing Deleted Failure: %s", ErrorStr(err)); |
| } |
| |
| SetCommandExitStatus(err); |
| } |
| |
| void PairingCommand::OnCommissioningComplete(NodeId nodeId, CHIP_ERROR err) |
| { |
| if (err == CHIP_NO_ERROR) |
| { |
| ChipLogProgress(chipTool, "Device commissioning completed with success"); |
| } |
| else |
| { |
| // When ICD device commissioning fails, the ICDClientInfo stored in OnICDRegistrationComplete needs to be removed. |
| if (mDeviceIsICD) |
| { |
| CHIP_ERROR deleteEntryError = |
| CHIPCommand::sICDClientStorage.DeleteEntry(ScopedNodeId(mNodeId, CurrentCommissioner().GetFabricIndex())); |
| if (deleteEntryError != CHIP_NO_ERROR) |
| { |
| ChipLogError(chipTool, "Failed to delete ICD entry: %s", ErrorStr(err)); |
| } |
| } |
| ChipLogProgress(chipTool, "Device commissioning Failure: %s", ErrorStr(err)); |
| } |
| |
| SetCommandExitStatus(err); |
| } |
| |
| void PairingCommand::OnReadCommissioningInfo(const Controller::ReadCommissioningInfo & info) |
| { |
| ChipLogProgress(AppServer, "OnReadCommissioningInfo - vendorId=0x%04X productId=0x%04X", info.basic.vendorId, |
| info.basic.productId); |
| |
| // The string in CharSpan received from the device is not null-terminated, we use std::string here for coping and |
| // appending a numm-terminator at the end of the string. |
| std::string userActiveModeTriggerInstruction; |
| |
| // Note: the callback doesn't own the buffer, should make a copy if it will be used it later. |
| if (info.icd.userActiveModeTriggerInstruction.size() != 0) |
| { |
| userActiveModeTriggerInstruction = |
| std::string(info.icd.userActiveModeTriggerInstruction.data(), info.icd.userActiveModeTriggerInstruction.size()); |
| } |
| |
| if (info.icd.userActiveModeTriggerHint.HasAny()) |
| { |
| ChipLogProgress(AppServer, "OnReadCommissioningInfo - LIT UserActiveModeTriggerHint=0x%08x", |
| info.icd.userActiveModeTriggerHint.Raw()); |
| ChipLogProgress(AppServer, "OnReadCommissioningInfo - LIT UserActiveModeTriggerInstruction=%s", |
| userActiveModeTriggerInstruction.c_str()); |
| } |
| ChipLogProgress(AppServer, "OnReadCommissioningInfo ICD - IdleModeDuration=%u activeModeDuration=%u activeModeThreshold=%u", |
| info.icd.idleModeDuration, info.icd.activeModeDuration, info.icd.activeModeThreshold); |
| } |
| |
| void PairingCommand::OnICDRegistrationComplete(ScopedNodeId nodeId, uint32_t icdCounter) |
| { |
| char icdSymmetricKeyHex[chip::Crypto::kAES_CCM128_Key_Length * 2 + 1]; |
| |
| chip::Encoding::BytesToHex(mICDSymmetricKey.Value().data(), mICDSymmetricKey.Value().size(), icdSymmetricKeyHex, |
| sizeof(icdSymmetricKeyHex), chip::Encoding::HexFlags::kNullTerminate); |
| |
| app::ICDClientInfo clientInfo; |
| clientInfo.peer_node = nodeId; |
| clientInfo.monitored_subject = mICDMonitoredSubject.Value(); |
| clientInfo.start_icd_counter = icdCounter; |
| |
| CHIP_ERROR err = CHIPCommand::sICDClientStorage.SetKey(clientInfo, mICDSymmetricKey.Value()); |
| if (err == CHIP_NO_ERROR) |
| { |
| err = CHIPCommand::sICDClientStorage.StoreEntry(clientInfo); |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| CHIPCommand::sICDClientStorage.RemoveKey(clientInfo); |
| ChipLogError(chipTool, "Failed to persist symmetric key for " ChipLogFormatX64 ": %s", ChipLogValueX64(nodeId.GetNodeId()), |
| err.AsString()); |
| SetCommandExitStatus(err); |
| return; |
| } |
| |
| mDeviceIsICD = true; |
| |
| ChipLogProgress(chipTool, "Saved ICD Symmetric key for " ChipLogFormatX64, ChipLogValueX64(nodeId.GetNodeId())); |
| ChipLogProgress(chipTool, |
| "ICD Registration Complete for device " ChipLogFormatX64 " / Check-In NodeID: " ChipLogFormatX64 |
| " / Monitored Subject: " ChipLogFormatX64 " / Symmetric Key: %s / ICDCounter %u", |
| ChipLogValueX64(nodeId.GetNodeId()), ChipLogValueX64(mICDCheckInNodeId.Value()), |
| ChipLogValueX64(mICDMonitoredSubject.Value()), icdSymmetricKeyHex, icdCounter); |
| } |
| |
| void PairingCommand::OnICDStayActiveComplete(ScopedNodeId deviceId, uint32_t promisedActiveDuration) |
| { |
| ChipLogProgress(chipTool, "ICD Stay Active Complete for device " ChipLogFormatX64 " / promisedActiveDuration: %u", |
| ChipLogValueX64(deviceId.GetNodeId()), promisedActiveDuration); |
| } |
| |
| void PairingCommand::OnDiscoveredDevice(const chip::Dnssd::CommissionNodeData & nodeData) |
| { |
| // Ignore nodes with closed commissioning window |
| VerifyOrReturn(nodeData.commissioningMode != 0); |
| |
| auto & resolutionData = nodeData; |
| |
| const uint16_t port = resolutionData.port; |
| char buf[chip::Inet::IPAddress::kMaxStringLength]; |
| resolutionData.ipAddress[0].ToString(buf); |
| ChipLogProgress(chipTool, "Discovered Device: %s:%u", buf, port); |
| |
| // Stop Mdns discovery. |
| auto err = CurrentCommissioner().StopCommissionableDiscovery(); |
| |
| // Some platforms does not implement a mechanism to stop mdns browse, so |
| // we just ignore CHIP_ERROR_NOT_IMPLEMENTED instead of bailing out. |
| if (CHIP_NO_ERROR != err && CHIP_ERROR_NOT_IMPLEMENTED != err) |
| { |
| SetCommandExitStatus(err); |
| return; |
| } |
| |
| CurrentCommissioner().RegisterDeviceDiscoveryDelegate(nullptr); |
| |
| auto interfaceId = resolutionData.ipAddress[0].IsIPv6LinkLocal() ? resolutionData.interfaceId : Inet::InterfaceId::Null(); |
| auto peerAddress = PeerAddress::UDP(resolutionData.ipAddress[0], port, interfaceId); |
| err = Pair(mNodeId, peerAddress); |
| if (CHIP_NO_ERROR != err) |
| { |
| SetCommandExitStatus(err); |
| } |
| } |
| |
| void PairingCommand::OnCurrentFabricRemove(void * context, NodeId nodeId, CHIP_ERROR err) |
| { |
| PairingCommand * command = reinterpret_cast<PairingCommand *>(context); |
| VerifyOrReturn(command != nullptr, ChipLogError(chipTool, "OnCurrentFabricRemove: context is null")); |
| |
| if (err == CHIP_NO_ERROR) |
| { |
| ChipLogProgress(chipTool, "Device unpair completed with success: " ChipLogFormatX64, ChipLogValueX64(nodeId)); |
| } |
| else |
| { |
| ChipLogProgress(chipTool, "Device unpair Failure: " ChipLogFormatX64 " %s", ChipLogValueX64(nodeId), ErrorStr(err)); |
| } |
| |
| command->SetCommandExitStatus(err); |
| } |
| |
| chip::Optional<uint16_t> PairingCommand::FailSafeExpiryTimeoutSecs() const |
| { |
| // We don't need to set additional failsafe timeout as we don't ask the final user if he wants to continue |
| return chip::Optional<uint16_t>(); |
| } |
| |
| void PairingCommand::OnDeviceAttestationCompleted(chip::Controller::DeviceCommissioner * deviceCommissioner, |
| chip::DeviceProxy * device, |
| const chip::Credentials::DeviceAttestationVerifier::AttestationDeviceInfo & info, |
| chip::Credentials::AttestationVerificationResult attestationResult) |
| { |
| // Bypass attestation verification, continue with success |
| auto err = deviceCommissioner->ContinueCommissioningAfterDeviceAttestation( |
| device, chip::Credentials::AttestationVerificationResult::kSuccess); |
| if (CHIP_NO_ERROR != err) |
| { |
| SetCommandExitStatus(err); |
| } |
| } |