src/app/tests/suites/TestGroupsCluster.yaml

# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: Groups Cluster Tests

config:
    nodeId: 0x12344321
    cluster: "Groups"
    endpoint: 1

tests:
    - label: "Wait for the commissioned device to be retrieved"
      cluster: "DelayCommands"
      command: "WaitForCommissionee"
      arguments:
          values:
              - name: "nodeId"
                value: nodeId

    - label: "View Group 0 (invalid)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0
      response:
          values:
              - name: "Status"
                value: 0x87
              - name: "GroupID"
                value: 0

    - label: "View First Group (not found)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0101
      response:
          values:
              - name: "Status"
                value: 0x8B
              - name: "GroupID"
                value: 0x0101

    - label: "Add First Group (no keys)"
      command: "AddGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0101
              - name: "GroupName"
                value: "Group #1"
      response:
          values:
              - name: "Status"
                value: 0x7e
              - name: "GroupID"
                value: 0x0101

    - label: "Add KeySet"
      cluster: "Group Key Management"
      endpoint: 0
      command: "KeySetWrite"
      arguments:
          values:
              - name: "GroupKeySet"
                value:
                    {
                        GroupKeySetID: 0x01a1,
                        GroupKeySecurityPolicy: 0,
                        EpochKey0: "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf",
                        EpochStartTime0: 1110000,
                        EpochKey1: "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf",
                        EpochStartTime1: 1110001,
                        EpochKey2: "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf",
                        EpochStartTime2: 1110002,
                    }

    - label: "Write Group Keys"
      cluster: "Group Key Management"
      endpoint: 0
      command: "writeAttribute"
      attribute: "GroupKeyMap"
      arguments:
          value:
              [
                  { FabricIndex: 1, GroupId: 0x0101, GroupKeySetID: 0x01a1 },
                  { FabricIndex: 1, GroupId: 0x0102, GroupKeySetID: 0x01a1 },
              ]

    - label: "Add First Group (new)"
      command: "AddGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0101
              - name: "GroupName"
                value: "Group #1"
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x0101

    - label: "View First Group (new)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0101
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x0101
              - name: "GroupName"
                value: "Group #1"

    - label: "View Second Group (not found)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0102
      response:
          values:
              - name: "Status"
                value: 0x8B
              - name: "GroupID"
                value: 0x0102

    - label: "Get Group Membership 1 (all)"
      command: "GetGroupMembership"
      arguments:
          values:
              - name: "GroupList"
                value: []
      response:
          values:
              - name: "Capacity"
                value: null
              - name: "GroupList"
                value: [0x0101]

    - label: "Add Second Group (new)"
      command: "AddGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0102
              - name: "GroupName"
                value: "Group #2"
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x0102

    - label: "View Second Group (new)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0102
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x0102
              - name: "GroupName"
                value: "Group #2"

    - label: "View Group 3 (not found)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x7fff
      response:
          values:
              - name: "Status"
                value: 0x8B
              - name: "GroupID"
                value: 0x7fff

    - label: "Add Group 3 (new)"
      # https://github.com/project-chip/connectedhomeip/issues/11312
      disabled: true
      command: "AddGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x7fff
              - name: "GroupName"
                value: "Group #3"
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x7fff

    - label: "View First Group (existing)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0101
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x0101
              - name: "GroupName"
                value: "Group #1"

    - label: "View Second Group (existing)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0102
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x0102
              - name: "GroupName"
                value: "Group #2"

    - label: "Get Group Membership 2"
      command: "GetGroupMembership"
      arguments:
          values:
              - name: "GroupList"
                value: [0x0102, 0x0103, 0x7fff]
      response:
          values:
              - name: "Capacity"
                value: null
              - name: "GroupList"
                value: [0x0102]

    - label: "View Group 3 (new)"
      # https://github.com/project-chip/connectedhomeip/issues/11312
      disabled: true
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x7fff
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x7fff
              - name: "GroupName"
                value: "Group #3"

    - label: "Remove Group 0 (invalid)"
      command: "RemoveGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0
      response:
          values:
              - name: "Status"
                value: 0x87
              - name: "GroupID"
                value: 0

    - label: "Remove Group 4 (not found)"
      command: "RemoveGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0104
      response:
          values:
              - name: "Status"
                value: 0x8B
              - name: "GroupID"
                value: 0x0104

    - label: "Remove Second Group (existing)"
      command: "RemoveGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0102
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x0102

    - label: "View First Group (not removed)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0101
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x0101
              - name: "GroupName"
                value: "Group #1"

    - label: "View Second Group (removed)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0102
      response:
          values:
              - name: "Status"
                value: 0x8B
              - name: "GroupID"
                value: 0x0102

    - label: "View Group 3 (not removed)"
      # https://github.com/project-chip/connectedhomeip/issues/11312
      disabled: true
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x7fff
      response:
          values:
              - name: "Status"
                value: 0
              - name: "GroupID"
                value: 0x7fff
              - name: "GroupName"
                value: "Group #3"

    - label: "Get Group Membership 3"
      command: "GetGroupMembership"
      arguments:
          values:
              - name: "GroupList"
                value: [0x01, 0x0101, 0x0102, 0x03]
      response:
          values:
              - name: "Capacity"
                value: null
              - name: "GroupList"
                value: [0x0101]

    - label: "Remove All"
      command: "RemoveAllGroups"

    - label: "View First Group (removed)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0101
      response:
          values:
              - name: "Status"
                value: 0x8B
              - name: "GroupID"
                value: 0x0101

    - label: "View Second Group (still removed)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x0102
      response:
          values:
              - name: "Status"
                value: 0x8B
              - name: "GroupID"
                value: 0x0102

    - label: "View Group 3 (removed)"
      command: "ViewGroup"
      arguments:
          values:
              - name: "GroupID"
                value: 0x7fff
      response:
          values:
              - name: "Status"
                value: 0x8B
              - name: "GroupID"
                value: 0x7fff

    - label: "Get Group Membership 4"
      command: "GetGroupMembership"
      arguments:
          values:
              - name: "GroupList"
                value: [0x01, 0x0101, 0x0102, 0x03, 0x7fff]
      response:
          values:
              - name: "Capacity"
                value: null
              - name: "GroupList"
                value: []