| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| # !!!!!!!!!! TEST INFORMATION !!!!!!!!!!!!!!!!!! |
| # This test file tests Group Multicast Messaging. |
| # For this test to work, A Group Write/Command and a unicast read need to occur to be able to confirm that the group Communication works. Every test comes in a pair |
| # Only Works on Linux machines |
| name: Basic Group Messaging Tests |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| nodeId2: |
| type: node_id |
| defaultValue: 0x43211234 |
| discriminator: |
| type: int16u |
| defaultValue: 3840 |
| payload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00KA0648G00" # This value needs to be generated automatically |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "KeySet Write 1" |
| cluster: "Group Key Management" |
| command: "KeySetWrite" |
| arguments: |
| values: |
| - name: "GroupKeySet" |
| value: { |
| GroupKeySetID: 0x01a1, |
| # TODO Revert this once MCSP is implemented |
| # GroupKeySecurityPolicy: 1, |
| GroupKeySecurityPolicy: 0, # 0 => TrustFirst |
| EpochKey0: "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf", |
| EpochStartTime0: 1110000, |
| EpochKey1: "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf", |
| EpochStartTime1: 1110001, |
| EpochKey2: "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf", |
| EpochStartTime2: 1110002, |
| } |
| |
| - label: "KeySet Write 2" |
| cluster: "Group Key Management" |
| command: "KeySetWrite" |
| arguments: |
| values: |
| - name: "GroupKeySet" |
| value: { |
| GroupKeySetID: 0x01a2, |
| GroupKeySecurityPolicy: 0, # TrustFirst |
| EpochKey0: "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf", |
| EpochStartTime0: 2220000, |
| EpochKey1: "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef", |
| EpochStartTime1: 2220001, |
| EpochKey2: "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff", |
| EpochStartTime2: 2220002, |
| } |
| |
| - label: "Write Group Keys" |
| cluster: "Group Key Management" |
| command: "writeAttribute" |
| attribute: "GroupKeyMap" |
| arguments: |
| value: |
| [ |
| { FabricIndex: 0, GroupId: 0x0101, GroupKeySetID: 0x01a1 }, |
| { FabricIndex: 0, GroupId: 0x0102, GroupKeySetID: 0x01a2 }, |
| ] |
| |
| - label: "Add Group 1 (endpoint 1)" |
| cluster: "Groups" |
| command: "AddGroup" |
| endpoint: 1 |
| arguments: |
| values: |
| - name: "GroupID" |
| value: 0x0101 |
| - name: "GroupName" |
| value: "Group #1" |
| response: |
| values: |
| - name: "Status" |
| value: 0 |
| - name: "GroupID" |
| value: 0x0101 |
| |
| - label: "Add Group 2 (endpoint 0)" |
| cluster: "Groups" |
| command: "AddGroup" |
| endpoint: 0 |
| arguments: |
| values: |
| - name: "GroupID" |
| value: 0x0102 |
| - name: "GroupName" |
| value: "Group #2" |
| response: |
| values: |
| - name: "Status" |
| value: 0 |
| - name: "GroupID" |
| value: 0x0102 |
| |
| - label: "Install ACLs" |
| cluster: "Access Control" |
| command: "writeAttribute" |
| attribute: "ACL" |
| arguments: |
| value: [ |
| # Any CASE can administer |
| { |
| FabricIndex: 0, |
| Privilege: 5, # administer |
| AuthMode: 2, # case |
| Subjects: null, |
| Targets: null, |
| }, |
| # Any group can manage |
| { |
| FabricIndex: 0, |
| Privilege: 4, # manage |
| AuthMode: 3, # group |
| Subjects: null, |
| Targets: null, |
| }, |
| ] |
| |
| # Test Pair 1 : Check initial value (ensure it's not the test value) |
| - label: "Read initial Attribute value" |
| command: "readAttribute" |
| attribute: "NodeLabel" |
| response: |
| value: "" |
| |
| # Test Pair 2 : Sends a Group Write Attribute |
| - label: "Group Write Attribute" |
| command: "writeAttribute" |
| attribute: "NodeLabel" |
| groupId: 0x0102 |
| arguments: |
| value: "xyzzy" |
| |
| # Give the group write time to actually happen; unicast delivery can outrace |
| # multicast if the unicast packet is sent immediately after the multicast one. |
| - label: "Wait for write 1" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 1000 |
| |
| # Test Pair 2 : Validates previous group write attribute with a unicast to read |
| - label: "Read back Attribute" |
| command: "readAttribute" |
| attribute: "NodeLabel" |
| response: |
| value: "xyzzy" |
| |
| # Test Pair 3 : Sends a Group Write Attribute |
| - label: "Restore initial Attribute value" |
| command: "writeAttribute" |
| attribute: "NodeLabel" |
| groupId: 0x0102 |
| arguments: |
| value: "" |
| |
| # Give the group write time to actually happen; unicast delivery can outrace |
| # multicast if the unicast packet is sent immediately after the multicast one. |
| - label: "Wait for write 2" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 100 |
| |
| # Test Pair 3 : Validates previous group write attribute with a unicast to read |
| - label: "Read back Attribute" |
| command: "readAttribute" |
| attribute: "NodeLabel" |
| response: |
| value: "" |
| |
| # Test Pair 4 : Sends a Group command |
| - label: "Check on/off attribute value is false for endpoint 1" |
| cluster: "On/Off" |
| command: "readAttribute" |
| attribute: "OnOff" |
| endpoint: 1 |
| response: |
| value: 0 |
| |
| - label: "Turn On the light to see attribute change" |
| cluster: "On/Off" |
| command: "On" |
| groupId: 0x0101 |
| |
| # Give the group invoke time to actually happen; unicast delivery can outrace |
| # multicast if the unicast packet is sent immediately after the multicast one. |
| - label: "Wait for command 3" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 100 |
| |
| # Test Pair 4 : Validates previous group command with a unicast to read |
| - label: |
| "Check on/off attribute value is true after on command for endpoint 1" |
| cluster: "On/Off" |
| command: "readAttribute" |
| attribute: "OnOff" |
| endpoint: 1 |
| response: |
| value: 1 |
| |
| - label: "Turn off the light to get ready for the next test" |
| cluster: "On/Off" |
| command: "Off" |
| endpoint: 1 |
| |
| - label: "Cleanup ACLs" |
| cluster: "Access Control" |
| command: "writeAttribute" |
| attribute: "ACL" |
| arguments: |
| value: [ |
| # Any CASE can administer |
| { |
| FabricIndex: 0, |
| Privilege: 5, # administer |
| AuthMode: 2, # case |
| Subjects: null, |
| Targets: null, |
| }, |
| ] |
| |
| - label: "Open Commissioning Window from alpha" |
| cluster: "Administrator Commissioning" |
| command: "OpenBasicCommissioningWindow" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 180 |
| |
| # We want to repeat all that from the "gamma" fabric, where our fabric |
| # index is 3 but the device's will be 2, so we have different fabric |
| # indices for the same fabric id. |
| - label: "Commission from gamma" |
| identity: "gamma" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: payload |
| |
| - label: "Wait for the commissioned device to be retrieved for gamma" |
| identity: "gamma" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| |
| - label: "KeySet Write 1 for gamma" |
| identity: "gamma" |
| cluster: "Group Key Management" |
| command: "KeySetWrite" |
| arguments: |
| values: |
| - name: "GroupKeySet" |
| value: { |
| GroupKeySetID: 0x01a1, |
| # TODO Revert this once MCSP is implemented |
| # GroupKeySecurityPolicy: 1, |
| GroupKeySecurityPolicy: 0, # 0 => TrustFirst |
| EpochKey0: "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf", |
| EpochStartTime0: 1110000, |
| EpochKey1: "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf", |
| EpochStartTime1: 1110001, |
| EpochKey2: "\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf", |
| EpochStartTime2: 1110002, |
| } |
| |
| - label: "KeySet Write 2 for gamma" |
| identity: "gamma" |
| cluster: "Group Key Management" |
| command: "KeySetWrite" |
| arguments: |
| values: |
| - name: "GroupKeySet" |
| value: { |
| GroupKeySetID: 0x01a2, |
| GroupKeySecurityPolicy: 0, # TrustFirst |
| EpochKey0: "\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf", |
| EpochStartTime0: 2220000, |
| EpochKey1: "\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef", |
| EpochStartTime1: 2220001, |
| EpochKey2: "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff", |
| EpochStartTime2: 2220002, |
| } |
| |
| - label: "Write Group Keys for gamma" |
| identity: "gamma" |
| cluster: "Group Key Management" |
| command: "writeAttribute" |
| attribute: "GroupKeyMap" |
| arguments: |
| value: |
| [ |
| { FabricIndex: 0, GroupId: 0x0101, GroupKeySetID: 0x01a1 }, |
| { FabricIndex: 0, GroupId: 0x0102, GroupKeySetID: 0x01a2 }, |
| ] |
| |
| - label: "Add Group 1 (endpoint 1) for gamma" |
| identity: "gamma" |
| cluster: "Groups" |
| command: "AddGroup" |
| endpoint: 1 |
| arguments: |
| values: |
| - name: "GroupID" |
| value: 0x0101 |
| - name: "GroupName" |
| value: "Group #1" |
| response: |
| values: |
| - name: "Status" |
| value: 0 |
| - name: "GroupID" |
| value: 0x0101 |
| |
| - label: "Add Group 2 (endpoint 0) for gamma" |
| identity: "gamma" |
| cluster: "Groups" |
| command: "AddGroup" |
| endpoint: 0 |
| arguments: |
| values: |
| - name: "GroupID" |
| value: 0x0102 |
| - name: "GroupName" |
| value: "Group #2" |
| response: |
| values: |
| - name: "Status" |
| value: 0 |
| - name: "GroupID" |
| value: 0x0102 |
| |
| - label: "Install ACLs for gamma" |
| identity: "gamma" |
| cluster: "Access Control" |
| command: "writeAttribute" |
| attribute: "ACL" |
| arguments: |
| value: [ |
| # Any CASE can administer |
| { |
| FabricIndex: 0, |
| Privilege: 5, # administer |
| AuthMode: 2, # case |
| Subjects: null, |
| Targets: null, |
| }, |
| # Any group can manage |
| { |
| FabricIndex: 0, |
| Privilege: 4, # manage |
| AuthMode: 3, # group |
| Subjects: null, |
| Targets: null, |
| }, |
| ] |
| |
| # Test Pair 1 : Check initial value (ensure it's not the test value) |
| - label: "Read initial Attribute value for gamma" |
| identity: "gamma" |
| command: "readAttribute" |
| attribute: "NodeLabel" |
| response: |
| value: "" |
| |
| # Test Pair 2 : Sends a Group Write Attribute |
| - label: "Group Write Attribute for gamma" |
| identity: "gamma" |
| command: "writeAttribute" |
| attribute: "NodeLabel" |
| groupId: 0x0102 |
| arguments: |
| value: "xyzzy" |
| |
| # Give the group write time to actually happen; unicast delivery can outrace |
| # multicast if the unicast packet is sent immediately after the multicast one. |
| - label: "Wait for write 1 for gamma" |
| identity: "gamma" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 100 |
| |
| # Test Pair 2 : Validates previous group write attribute with a unicast to read |
| - label: "Read back Attribute for gamma" |
| identity: "gamma" |
| command: "readAttribute" |
| attribute: "NodeLabel" |
| response: |
| value: "xyzzy" |
| |
| # Test Pair 3 : Sends a Group Write Attribute |
| - label: "Restore initial Attribute value for gamma" |
| identity: "gamma" |
| command: "writeAttribute" |
| attribute: "NodeLabel" |
| groupId: 0x0102 |
| arguments: |
| value: "" |
| |
| # Give the group write time to actually happen; unicast delivery can outrace |
| # multicast if the unicast packet is sent immediately after the multicast one. |
| - label: "Wait for write 2 for gamma" |
| identity: "gamma" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 100 |
| |
| # Test Pair 3 : Validates previous group write attribute with a unicast to read |
| - label: "Read back Attribute for gamma" |
| identity: "gamma" |
| command: "readAttribute" |
| attribute: "NodeLabel" |
| response: |
| value: "" |
| |
| # Test Pair 4 : Sends a Group command |
| - label: "Check on/off attribute value is false for endpoint 1 for gamma" |
| cluster: "On/Off" |
| command: "readAttribute" |
| attribute: "OnOff" |
| endpoint: 1 |
| response: |
| value: 0 |
| |
| - label: "Turn On the light to see attribute change for gamma" |
| identity: "gamma" |
| cluster: "On/Off" |
| command: "On" |
| groupId: 0x0101 |
| |
| # Give the group invoke time to actually happen; unicast delivery can outrace |
| # multicast if the unicast packet is sent immediately after the multicast one. |
| - label: "Wait for command 3 for gamma" |
| identity: "gamma" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 100 |
| |
| # Test Pair 4 : Validates previous group command with a unicast to read |
| - label: |
| "Check on/off attribute value is true after on command for endpoint 1 |
| for gamma" |
| cluster: "On/Off" |
| command: "readAttribute" |
| attribute: "OnOff" |
| endpoint: 1 |
| response: |
| value: 1 |
| |
| - label: "Cleanup ACLs for gamma" |
| identity: "gamma" |
| cluster: "Access Control" |
| command: "writeAttribute" |
| attribute: "ACL" |
| arguments: |
| value: [ |
| # Any CASE can administer |
| { |
| FabricIndex: 0, |
| Privilege: 5, # administer |
| AuthMode: 2, # case |
| Subjects: null, |
| Targets: null, |
| }, |
| ] |
