| /* |
| * |
| * Copyright (c) 2021 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/DefaultStorageKeyAllocator.h> |
| #include <lib/support/SafeInt.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| #include <platform/CHIPDeviceLayer.h> |
| #include <platform/KeyValueStoreManager.h> |
| #include <platform/NetworkCommissioning.h> |
| #include <platform/OpenThread/GenericNetworkCommissioningThreadDriver.h> |
| #include <platform/OpenThread/GenericThreadStackManagerImpl_OpenThread.h> |
| #include <platform/ThreadStackManager.h> |
| |
| #include <limits> |
| |
| using namespace chip; |
| using namespace chip::Thread; |
| using namespace chip::DeviceLayer::PersistedStorage; |
| |
| namespace chip { |
| namespace DeviceLayer { |
| namespace NetworkCommissioning { |
| |
| // NOTE: For GenericThreadDriver, we assume that the network configuration is persisted by |
| // the OpenThread stack after ConnectNetwork command is called, and before that, all the changes |
| // are made to a local copy of the dataset stored in mStagingNetwork. |
| // Also, in order to support the fail-safe mechanism, the configuration is backed up in a temporary |
| // KVS slot upon any changes and restored when the fail-safe timeout is triggered or the device |
| // reboots without completing all the changes. |
| |
| CHIP_ERROR GenericThreadDriver::Init(Internal::BaseDriver::NetworkStatusChangeCallback * statusChangeCallback) |
| { |
| ThreadStackMgrImpl().SetNetworkStatusChangeCallback(statusChangeCallback); |
| ThreadStackMgrImpl().GetThreadProvision(mStagingNetwork); |
| |
| // If the network configuration backup exists, it means that the device has been rebooted with |
| // the fail-safe armed. Since OpenThread persists all operational dataset changes, the backup |
| // must be restored on the boot. If there's no backup, the below function is a no-op. |
| RevertConfiguration(); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void GenericThreadDriver::Shutdown() |
| { |
| ThreadStackMgrImpl().SetNetworkStatusChangeCallback(nullptr); |
| } |
| |
| CHIP_ERROR GenericThreadDriver::CommitConfiguration() |
| { |
| // OpenThread persists the network configuration on AttachToThreadNetwork, so simply remove |
| // the backup, so that it cannot be restored. If no backup could be found, it means that the |
| // configuration has not been modified since the fail-safe was armed, so return with no error. |
| |
| CHIP_ERROR error = KeyValueStoreMgr().Delete(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName()); |
| |
| return error == CHIP_ERROR_PERSISTED_STORAGE_VALUE_NOT_FOUND ? CHIP_NO_ERROR : error; |
| } |
| |
| CHIP_ERROR GenericThreadDriver::RevertConfiguration() |
| { |
| uint8_t datasetBytes[Thread::kSizeOperationalDataset]; |
| size_t datasetLength; |
| |
| CHIP_ERROR error = KeyValueStoreMgr().Get(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName(), datasetBytes, |
| sizeof(datasetBytes), &datasetLength); |
| |
| // If no backup could be found, it means that the network configuration has not been modified |
| // since the fail-safe was armed, so return with no error. |
| ReturnErrorCodeIf(error == CHIP_ERROR_PERSISTED_STORAGE_VALUE_NOT_FOUND, CHIP_NO_ERROR); |
| |
| ChipLogProgress(NetworkProvisioning, "Reverting Thread operational dataset"); |
| |
| if (error == CHIP_NO_ERROR) |
| { |
| error = mStagingNetwork.Init(ByteSpan(datasetBytes, datasetLength)); |
| } |
| |
| if (error == CHIP_NO_ERROR) |
| { |
| error = DeviceLayer::ThreadStackMgrImpl().AttachToThreadNetwork(mStagingNetwork, /* callback */ nullptr); |
| } |
| |
| // Always remove the backup, regardless if it can be successfully restored. |
| KeyValueStoreMgr().Delete(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName()); |
| |
| return error; |
| } |
| |
| Status GenericThreadDriver::AddOrUpdateNetwork(ByteSpan operationalDataset, MutableCharSpan & outDebugText, |
| uint8_t & outNetworkIndex) |
| { |
| ByteSpan newExtpanid; |
| Thread::OperationalDataset newDataset; |
| |
| outDebugText.reduce_size(0); |
| outNetworkIndex = 0; |
| |
| VerifyOrReturnError(newDataset.Init(operationalDataset) == CHIP_NO_ERROR && newDataset.IsCommissioned(), Status::kOutOfRange); |
| newDataset.GetExtendedPanIdAsByteSpan(newExtpanid); |
| |
| // We only support one active operational dataset. Add/Update based on either: |
| // Staging network not commissioned yet (active) or we are updating the dataset with same Extended Pan ID. |
| VerifyOrReturnError(!mStagingNetwork.IsCommissioned() || MatchesNetworkId(mStagingNetwork, newExtpanid) == Status::kSuccess, |
| Status::kBoundsExceeded); |
| VerifyOrReturnError(BackupConfiguration() == CHIP_NO_ERROR, Status::kUnknownError); |
| |
| mStagingNetwork = newDataset; |
| return Status::kSuccess; |
| } |
| |
| Status GenericThreadDriver::RemoveNetwork(ByteSpan networkId, MutableCharSpan & outDebugText, uint8_t & outNetworkIndex) |
| { |
| outDebugText.reduce_size(0); |
| outNetworkIndex = 0; |
| |
| NetworkCommissioning::Status status = MatchesNetworkId(mStagingNetwork, networkId); |
| |
| VerifyOrReturnError(status == Status::kSuccess, status); |
| VerifyOrReturnError(BackupConfiguration() == CHIP_NO_ERROR, Status::kUnknownError); |
| |
| mStagingNetwork.Clear(); |
| |
| return Status::kSuccess; |
| } |
| |
| Status GenericThreadDriver::ReorderNetwork(ByteSpan networkId, uint8_t index, MutableCharSpan & outDebugText) |
| { |
| outDebugText.reduce_size(0); |
| |
| NetworkCommissioning::Status status = MatchesNetworkId(mStagingNetwork, networkId); |
| |
| VerifyOrReturnError(status == Status::kSuccess, status); |
| VerifyOrReturnError(index == 0, Status::kOutOfRange); |
| |
| return Status::kSuccess; |
| } |
| |
| void GenericThreadDriver::ConnectNetwork(ByteSpan networkId, ConnectCallback * callback) |
| { |
| NetworkCommissioning::Status status = MatchesNetworkId(mStagingNetwork, networkId); |
| |
| if (status == Status::kSuccess && BackupConfiguration() != CHIP_NO_ERROR) |
| { |
| status = Status::kUnknownError; |
| } |
| |
| if (status == Status::kSuccess && |
| DeviceLayer::ThreadStackMgrImpl().AttachToThreadNetwork(mStagingNetwork, callback) != CHIP_NO_ERROR) |
| { |
| status = Status::kUnknownError; |
| } |
| |
| if (status != Status::kSuccess) |
| { |
| callback->OnResult(status, CharSpan(), 0); |
| } |
| } |
| |
| void GenericThreadDriver::ScanNetworks(ThreadDriver::ScanCallback * callback) |
| { |
| if (DeviceLayer::ThreadStackMgrImpl().StartThreadScan(callback) != CHIP_NO_ERROR) |
| { |
| callback->OnFinished(Status::kUnknownError, CharSpan(), nullptr); |
| } |
| } |
| |
| Status GenericThreadDriver::MatchesNetworkId(const Thread::OperationalDataset & dataset, const ByteSpan & networkId) const |
| { |
| ByteSpan extpanid; |
| |
| if (!dataset.IsCommissioned()) |
| { |
| return Status::kNetworkIDNotFound; |
| } |
| |
| if (dataset.GetExtendedPanIdAsByteSpan(extpanid) != CHIP_NO_ERROR) |
| { |
| return Status::kUnknownError; |
| } |
| |
| return networkId.data_equal(extpanid) ? Status::kSuccess : Status::kNetworkIDNotFound; |
| } |
| |
| CHIP_ERROR GenericThreadDriver::BackupConfiguration() |
| { |
| // If configuration is already backed up, return with no error |
| CHIP_ERROR err = KeyValueStoreMgr().Get(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName(), nullptr, 0); |
| |
| if (err == CHIP_NO_ERROR || err == CHIP_ERROR_BUFFER_TOO_SMALL) |
| { |
| return CHIP_NO_ERROR; |
| } |
| |
| ByteSpan dataset = mStagingNetwork.AsByteSpan(); |
| |
| return KeyValueStoreMgr().Put(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName(), dataset.data(), dataset.size()); |
| } |
| |
| size_t GenericThreadDriver::ThreadNetworkIterator::Count() |
| { |
| return driver->mStagingNetwork.IsCommissioned() ? 1 : 0; |
| } |
| |
| bool GenericThreadDriver::ThreadNetworkIterator::Next(Network & item) |
| { |
| if (exhausted || !driver->mStagingNetwork.IsCommissioned()) |
| { |
| return false; |
| } |
| uint8_t extpanid[kSizeExtendedPanId]; |
| VerifyOrReturnError(driver->mStagingNetwork.GetExtendedPanId(extpanid) == CHIP_NO_ERROR, false); |
| memcpy(item.networkID, extpanid, kSizeExtendedPanId); |
| item.networkIDLen = kSizeExtendedPanId; |
| item.connected = false; |
| exhausted = true; |
| |
| Thread::OperationalDataset currentDataset; |
| uint8_t enabledExtPanId[Thread::kSizeExtendedPanId]; |
| |
| // The Thread network is not actually enabled. |
| VerifyOrReturnError(ConnectivityMgrImpl().IsThreadAttached(), true); |
| VerifyOrReturnError(ThreadStackMgrImpl().GetThreadProvision(currentDataset) == CHIP_NO_ERROR, true); |
| // The Thread network is not enabled, but has a different extended pan id. |
| VerifyOrReturnError(currentDataset.GetExtendedPanId(enabledExtPanId) == CHIP_NO_ERROR, true); |
| VerifyOrReturnError(memcmp(extpanid, enabledExtPanId, kSizeExtendedPanId) == 0, true); |
| // The Thread network is enabled and has the same extended pan id as the one in our record. |
| item.connected = true; |
| |
| return true; |
| } |
| |
| } // namespace NetworkCommissioning |
| } // namespace DeviceLayer |
| } // namespace chip |