| /* |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <platform_stdlib.h> |
| |
| #include "AmebaObserver.h" |
| #include "BindingHandler.h" |
| #include "CHIPDeviceManager.h" |
| #include "DeviceCallbacks.h" |
| #include "Globals.h" |
| #include "LEDWidget.h" |
| #include "ManualOperationCommand.h" |
| #include "chip_porting.h" |
| #include <DeviceInfoProviderImpl.h> |
| #include <lwip_netconf.h> |
| |
| #include <app/clusters/identify-server/identify-server.h> |
| #include <app/clusters/laundry-dryer-controls-server/laundry-dryer-controls-server.h> |
| #include <app/clusters/laundry-washer-controls-server/laundry-washer-controls-server.h> |
| #include <app/clusters/network-commissioning/network-commissioning.h> |
| #include <app/server/OnboardingCodesUtil.h> |
| #include <app/server/Server.h> |
| #include <app/util/endpoint-config-api.h> |
| #include <laundry-dryer-controls-delegate-impl.h> |
| #include <laundry-washer-controls-delegate-impl.h> |
| #include <lib/core/ErrorStr.h> |
| #include <microwave-oven-device.h> |
| #include <platform/Ameba/AmebaConfig.h> |
| #include <platform/Ameba/NetworkCommissioningDriver.h> |
| #include <platform/CHIPDeviceLayer.h> |
| #include <setup_payload/ManualSetupPayloadGenerator.h> |
| #include <setup_payload/QRCodeSetupPayloadGenerator.h> |
| #include <static-supported-temperature-levels.h> |
| #include <support/CHIPMem.h> |
| #if CONFIG_ENABLE_AMEBA_TEST_EVENT_TRIGGER |
| #include <app/clusters/smoke-co-alarm-server/SmokeCOTestEventTriggerHandler.h> |
| #include <test_event_trigger/AmebaTestEventTriggerDelegate.h> |
| #endif |
| |
| #if CONFIG_ENABLE_PW_RPC |
| #include <Rpc.h> |
| #endif |
| |
| #if CONFIG_ENABLE_CHIP_SHELL |
| #include <shell/launch_shell.h> |
| #endif |
| |
| using namespace ::chip; |
| using namespace ::chip::app; |
| using namespace ::chip::DeviceManager; |
| using namespace ::chip::DeviceLayer; |
| using namespace ::chip::System; |
| |
| namespace { // Network Commissioning |
| constexpr EndpointId kNetworkCommissioningEndpointMain = 0; |
| constexpr EndpointId kNetworkCommissioningEndpointSecondary = 0xFFFE; |
| |
| app::Clusters::NetworkCommissioning::Instance |
| sWiFiNetworkCommissioningInstance(kNetworkCommissioningEndpointMain /* Endpoint Id */, |
| &(NetworkCommissioning::AmebaWiFiDriver::GetInstance())); |
| |
| app::Clusters::TemperatureControl::AppSupportedTemperatureLevelsDelegate sAppSupportedTemperatureLevelsDelegate; |
| } // namespace |
| |
| void NetWorkCommissioningInstInit() |
| { |
| sWiFiNetworkCommissioningInstance.Init(); |
| |
| // We only have network commissioning on endpoint 0. |
| emberAfEndpointEnableDisable(kNetworkCommissioningEndpointSecondary, false); |
| } |
| |
| void OnIdentifyTriggerEffect(Identify * identify) |
| { |
| switch (identify->mCurrentEffectIdentifier) |
| { |
| case Clusters::Identify::EffectIdentifierEnum::kBlink: |
| ChipLogProgress(Zcl, "Clusters::Identify::EffectIdentifierEnum::kBlink"); |
| break; |
| case Clusters::Identify::EffectIdentifierEnum::kBreathe: |
| ChipLogProgress(Zcl, "Clusters::Identify::EffectIdentifierEnum::kBreathe"); |
| break; |
| case Clusters::Identify::EffectIdentifierEnum::kOkay: |
| ChipLogProgress(Zcl, "Clusters::Identify::EffectIdentifierEnum::kOkay"); |
| break; |
| case Clusters::Identify::EffectIdentifierEnum::kChannelChange: |
| ChipLogProgress(Zcl, "Clusters::Identify::EffectIdentifierEnum::kChannelChange"); |
| break; |
| default: |
| ChipLogProgress(Zcl, "No identifier effect"); |
| break; |
| } |
| return; |
| } |
| |
| Identify gIdentify0 = { |
| chip::EndpointId{ 0 }, |
| [](Identify *) { ChipLogProgress(Zcl, "onIdentifyStart"); }, |
| [](Identify *) { ChipLogProgress(Zcl, "onIdentifyStop"); }, |
| Clusters::Identify::IdentifyTypeEnum::kVisibleIndicator, |
| OnIdentifyTriggerEffect, |
| }; |
| |
| Identify gIdentify1 = { |
| chip::EndpointId{ 1 }, |
| [](Identify *) { ChipLogProgress(Zcl, "onIdentifyStart"); }, |
| [](Identify *) { ChipLogProgress(Zcl, "onIdentifyStop"); }, |
| Clusters::Identify::IdentifyTypeEnum::kVisibleIndicator, |
| OnIdentifyTriggerEffect, |
| }; |
| |
| #ifdef CONFIG_PLATFORM_8721D |
| #define STATUS_LED_GPIO_NUM PB_5 |
| #elif defined(CONFIG_PLATFORM_8710C) |
| #define STATUS_LED_GPIO_NUM PA_20 |
| #else |
| #define STATUS_LED_GPIO_NUM NC |
| #endif |
| |
| static DeviceCallbacks EchoCallbacks; |
| chip::DeviceLayer::DeviceInfoProviderImpl gExampleDeviceInfoProvider; |
| |
| #if CONFIG_ENABLE_AMEBA_TEST_EVENT_TRIGGER |
| uint8_t sTestEventTriggerEnableKey[TestEventTriggerDelegate::kEnableKeyLength] = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, |
| 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }; |
| #endif |
| |
| static void InitServer(intptr_t context) |
| { |
| // Init ZCL Data Model and CHIP App Server |
| static chip::CommonCaseDeviceServerInitParams initParams; |
| |
| #if CONFIG_ENABLE_AMEBA_TEST_EVENT_TRIGGER |
| static AmebaTestEventTriggerDelegate sTestEventTriggerDelegate{ ByteSpan(sTestEventTriggerEnableKey) }; |
| initParams.testEventTriggerDelegate = &sTestEventTriggerDelegate; |
| #endif |
| static AmebaObserver sAmebaObserver; |
| initParams.appDelegate = &sAmebaObserver; |
| |
| initParams.InitializeStaticResourcesBeforeServerInit(); |
| |
| chip::Server::GetInstance().Init(initParams); |
| gExampleDeviceInfoProvider.SetStorageDelegate(&Server::GetInstance().GetPersistentStorage()); |
| // TODO: Use our own DeviceInfoProvider |
| chip::DeviceLayer::SetDeviceInfoProvider(&gExampleDeviceInfoProvider); |
| |
| NetWorkCommissioningInstInit(); |
| |
| if (RTW_SUCCESS != wifi_is_connected_to_ap()) |
| { |
| // QR code will be used with CHIP Tool |
| PrintOnboardingCodes(chip::RendezvousInformationFlags(chip::RendezvousInformationFlag::kBLE)); |
| } |
| |
| #if CONFIG_ENABLE_CHIP_SHELL |
| InitBindingHandler(); |
| InitManualOperation(); |
| #endif |
| app::Clusters::TemperatureControl::SetInstance(&sAppSupportedTemperatureLevelsDelegate); |
| MatterMicrowaveOvenServerInit(); |
| #if CONFIG_ENABLE_AMEBA_TEST_EVENT_TRIGGER |
| static SmokeCOTestEventTriggerHandler sSmokeCOTestEventTriggerHandler; |
| Server::GetInstance().GetTestEventTriggerDelegate()->AddHandler(&sSmokeCOTestEventTriggerHandler); |
| #endif |
| chip::Server::GetInstance().GetFabricTable().AddFabricDelegate(&sAmebaObserver); |
| } |
| |
| extern "C" void ChipTest(void) |
| { |
| ChipLogProgress(DeviceLayer, "All Clusters Demo!"); |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| #if CONFIG_ENABLE_PW_RPC |
| chip::rpc::Init(); |
| #endif |
| |
| initPref(); |
| |
| CHIPDeviceManager & deviceMgr = CHIPDeviceManager::GetInstance(); |
| |
| err = deviceMgr.Init(&EchoCallbacks); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "DeviceManagerInit() - ERROR!\r\n"); |
| } |
| |
| chip::DeviceLayer::PlatformMgr().ScheduleWork(InitServer, 0); |
| |
| statusLED1.Init(STATUS_LED_GPIO_NUM); |
| |
| #if CONFIG_ENABLE_CHIP_SHELL |
| chip::LaunchShell(); |
| #endif |
| } |
| |
| extern "C" void ChipTestShutdown(void) |
| { |
| ChipLogProgress(DeviceLayer, "All Clusters Demo! Shutdown Now!"); |
| CHIPDeviceManager & deviceMgr = CHIPDeviceManager::GetInstance(); |
| deviceMgr.Shutdown(); |
| } |
| |
| bool lowPowerClusterSleep() |
| { |
| return true; |
| } |
| |
| using namespace chip::app::Clusters::LaundryWasherControls; |
| void emberAfLaundryWasherControlsClusterInitCallback(EndpointId endpoint) |
| { |
| LaundryWasherControlsServer::SetDefaultDelegate(endpoint, &LaundryWasherControlDelegate::getLaundryWasherControlDelegate()); |
| } |
| |
| using namespace chip::app::Clusters::LaundryDryerControls; |
| void emberAfLaundryDryerControlsClusterInitCallback(EndpointId endpoint) |
| { |
| LaundryDryerControlsServer::SetDefaultDelegate(endpoint, &LaundryDryerControlDelegate::getLaundryDryerControlDelegate()); |
| } |