examples/shell/openiotsdk/freertos-config/FreeRTOSConfig.h - third_party/github/project-chip/connectedhomeip - Git at Google

 /*
  *
  *    Copyright (c) 2022 Project CHIP Authors
  *    All rights reserved.
  *
  *    Licensed under the Apache License, Version 2.0 (the "License");
  *    you may not use this file except in compliance with the License.
  *    You may obtain a copy of the License at
  *
  *        http://www.apache.org/licenses/LICENSE-2.0
  *
  *    Unless required by applicable law or agreed to in writing, software
  *    distributed under the License is distributed on an "AS IS" BASIS,
  *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *    See the License for the specific language governing permissions and
  *    limitations under the License.
  */

 #ifndef FREERTOS_CONFIG_H
 #define FREERTOS_CONFIG_H

 /*-----------------------------------------------------------
  * Application specific definitions.
  *
  * These definitions should be adjusted for your particular hardware and
  * application requirements.
  *
  * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
  * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
  *
  * See http://www.freertos.org/a00110.html
  *----------------------------------------------------------*/

 #if (defined(__ARMCC_VERSION) || defined(__GNUC__) || defined(__ICCARM__))
 #include <stdint.h>

 extern uint32_t SystemCoreClock;
 #endif

 //  <o>Minimal stack size [words] <0-65535>
 //  <i> Stack for idle task and default task stack in words.
 //  <i> Default: 128
 #define configMINIMAL_STACK_SIZE ((uint16_t)(4 * 1024))

 //  <o>Total heap size [bytes] <0-0xFFFFFFFF>
 //  <i> Heap memory size in bytes.
 //  <i> Default: 8192
 #define configTOTAL_HEAP_SIZE ((size_t) 8192)

 //  <o>Kernel tick frequency [Hz] <0-0xFFFFFFFF>
 //  <i> Kernel tick rate in Hz.
 //  <i> Default: 1000
 #define configTICK_RATE_HZ ((TickType_t) 1000)

 //  <o>Timer task stack depth [words] <0-65535>
 //  <i> Stack for timer task in words.
 //  <i> Default: 80
 #define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE

 //  <o>Timer task priority <0-56>
 //  <i> Timer task priority.
 //  <i> Default: 40 (High)
 #define configTIMER_TASK_PRIORITY 40

 //  <o>Timer queue length <0-1024>
 //  <i> Timer command queue length.
 //  <i> Default: 5
 #define configTIMER_QUEUE_LENGTH 5

 //  <o>Preemption interrupt priority
 //  <i> Maximum priority of interrupts that are safe to call FreeRTOS API.
 //  <i> Default: 16
 #define configMAX_SYSCALL_INTERRUPT_PRIORITY (5 << (8 - configPRIO_BITS))

 //  <q>Use time slicing
 //  <i> Enable setting to use timeslicing.
 //  <i> Default: 1
 #define configUSE_TIME_SLICING 1

 //  <q>Idle should yield
 //  <i> Control Yield behaviour of the idle task.
 //  <i> Default: 1
 #define configIDLE_SHOULD_YIELD 1

 //  <o>Check for stack overflow
 //    <0=>Disable <1=>Method one <2=>Method two
 //  <i> Enable or disable stack overflow checking.
 //  <i> Callback function vApplicationStackOverflowHook implementation is required when stack checking is enabled.
 //  <i> Default: 0
 #define configCHECK_FOR_STACK_OVERFLOW 2

 //  <q>Use idle hook
 //  <i> Enable callback function call on each idle task iteration.
 //  <i> Callback function vApplicationIdleHook implementation is required when idle hook is enabled.
 //  <i> Default: 0
 #define configUSE_IDLE_HOOK 0

 //  <q>Use tick hook
 //  <i> Enable callback function call during each tick interrupt.
 //  <i> Callback function vApplicationTickHook implementation is required when tick hook is enabled.
 //  <i> Default: 0
 #define configUSE_TICK_HOOK 0

 //  <q>Use deamon task startup hook
 //  <i> Enable callback function call when timer service starts.
 //  <i> Callback function vApplicationDaemonTaskStartupHook implementation is required when deamon task startup hook is
 //  enabled. <i> Default: 0
 #define configUSE_DAEMON_TASK_STARTUP_HOOK 0

 //  <q>Use malloc failed hook
 //  <i> Enable callback function call when out of dynamic memory.
 //  <i> Callback function vApplicationMallocFailedHook implementation is required when malloc failed hook is enabled.
 //  <i> Default: 0
 #define configUSE_MALLOC_FAILED_HOOK 0

 //  <o>Queue registry size
 //  <i> Define maximum number of queue objects registered for debug purposes.
 //  <i> The queue registry is used by kernel aware debuggers to locate queue and semaphore structures and display
 //  associated text names. <i> Default: 0
 #define configQUEUE_REGISTRY_SIZE 0

 // <h>Event Recorder configuration
 //  <i> Initialize and setup Event Recorder level filtering.
 //  <i> Settings have no effect when Event Recorder is not present.

 //  <q>Initialize Event Recorder
 //  <i> Initialize Event Recorder before FreeRTOS kernel start.
 //  <i> Default: 1
 #define configEVR_INITIALIZE 1

 //  <e>Setup recording level filter
 //  <i> Enable configuration of FreeRTOS events recording level
 //  <i> Default: 1
 #define configEVR_SETUP_LEVEL 1

 //  <o>Tasks functions
 //  <i> Define event recording level bitmask for events generated from Tasks functions.
 //  <i> Default: 0x05
 //    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
 #define configEVR_LEVEL_TASKS 0x05

 //  <o>Queue functions
 //  <i> Define event recording level bitmask for events generated from Queue functions.
 //  <i> Default: 0x05
 //    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
 #define configEVR_LEVEL_QUEUE 0x05

 //  <o>Timer functions
 //  <i> Define event recording level bitmask for events generated from Timer functions.
 //  <i> Default: 0x05
 //    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
 #define configEVR_LEVEL_TIMERS 0x05

 //  <o>Event Groups functions
 //  <i> Define event recording level bitmask for events generated from Event Groups functions.
 //  <i> Default: 0x05
 //    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
 #define configEVR_LEVEL_EVENTGROUPS 0x05

 //  <o>Heap functions
 //  <i> Define event recording level bitmask for events generated from Heap functions.
 //  <i> Default: 0x05
 //    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
 #define configEVR_LEVEL_HEAP 0x05

 //  <o>Stream Buffer functions
 //  <i> Define event recording level bitmask for events generated from Stream Buffer functions.
 //  <i> Default: 0x05
 //    <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
 #define configEVR_LEVEL_STREAMBUFFER 0x05
 //  </e>
 // </h>

 // <h> Port Specific Features
 // <i> Enable and configure port specific features.
 // <i> Check FreeRTOS documentation for definitions that apply for the used port.

 //  <q>Use Floating Point Unit
 //  <i> Using Floating Point Unit (FPU) affects context handling.
 //  <i> Enable FPU when application uses floating point operations.
 //  <i> Default: 1
 #define configENABLE_FPU 1

 //  <q>Use Memory Protection Unit
 //  <i> Using Memory Protection Unit (MPU) requires detailed memory map definition.
 //  <i> This setting is only releavant for MPU enabled ports.
 //  <i> Default: 0
 #define configENABLE_MPU 0

 //  <q> Use TrustZone Secure Side Only
 //  <i> This settings prevents FreeRTOS contex switch to Non-Secure side.
 //  <i> Enable this setting when FreeRTOS runs on the Secure side only.
 #define configRUN_FREERTOS_SECURE_ONLY CONFIG_RUN_FREERTOS_SECURE_ONLY

 //  <q>Use TrustZone Security Extension
 //  <i> Using TrustZone affects context handling.
 //  <i> Enable TrustZone when FreeRTOS runs on the Non-Secure side and calls functions from the Secure side.
 //  <i> Default: 1
 #define configENABLE_TRUSTZONE 0

 //  <o>Minimal secure stack size [words] <0-65535>
 //  <i> Stack for idle task Secure side context in words.
 //  <i> This setting is only relevant when TrustZone extension is enabled.
 //  <i> Default: 128
 #define configMINIMAL_SECURE_STACK_SIZE ((uint32_t) 128)
 // </h>

 #ifdef __NVIC_PRIO_BITS
 #define configPRIO_BITS __NVIC_PRIO_BITS
 #else
 #define configPRIO_BITS 4
 #endif

 //------------- <<< end of configuration section >>> ---------------------------

 /* Defines needed by FreeRTOS to implement CMSIS RTOS2 API. Do not change! */
 #define configCPU_CLOCK_HZ (SystemCoreClock)
 #define configSUPPORT_STATIC_ALLOCATION 1
 #define configSUPPORT_DYNAMIC_ALLOCATION 1
 #define configUSE_PREEMPTION 1
 #define configUSE_TIMERS 1
 #define configUSE_MUTEXES 1
 #define configUSE_RECURSIVE_MUTEXES 1
 #define configUSE_COUNTING_SEMAPHORES 1
 #define configUSE_TASK_NOTIFICATIONS 1
 #define configUSE_TRACE_FACILITY 1
 #define configUSE_16_BIT_TICKS 0
 #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
 #define configMAX_PRIORITIES 56
 #define configKERNEL_INTERRUPT_PRIORITY (0x07 << (8 - configPRIO_BITS))

 /* Defines that include FreeRTOS functions which implement CMSIS RTOS2 API. Do not change! */
 #define INCLUDE_xEventGroupSetBitsFromISR 1
 #define INCLUDE_xSemaphoreGetMutexHolder 1
 #define INCLUDE_vTaskDelay 1
 #define INCLUDE_xTaskDelayUntil 1
 #define INCLUDE_vTaskDelete 1
 #define INCLUDE_xTaskGetCurrentTaskHandle 1
 #define INCLUDE_xTaskGetSchedulerState 1
 #define INCLUDE_uxTaskGetStackHighWaterMark 1
 #define INCLUDE_uxTaskPriorityGet 1
 #define INCLUDE_vTaskPrioritySet 1
 #define INCLUDE_eTaskGetState 1
 #define INCLUDE_vTaskSuspend 1
 #define INCLUDE_xTimerPendFunctionCall 1

 /* Map the FreeRTOS port interrupt handlers to their CMSIS standard names. */
 #define xPortPendSVHandler PendSV_Handler
 #define vPortSVCHandler SVC_Handler

 /* Ensure Cortex-M port compatibility. */
 #define SysTick_Handler xPortSysTickHandler

 #include "RTE_Components.h"
 #include CMSIS_device_header

 #endif /* FREERTOS_CONFIG_H */
	/*
	*
	* Copyright (c) 2022 Project CHIP Authors
	* All rights reserved.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#ifndef FREERTOS_CONFIG_H
	#define FREERTOS_CONFIG_H

	/*-----------------------------------------------------------
	* Application specific definitions.
	*
	* These definitions should be adjusted for your particular hardware and
	* application requirements.
	*
	* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
	* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
	*
	* See http://www.freertos.org/a00110.html
	----------------------------------------------------------/

	#if (defined(__ARMCC_VERSION) \|\| defined(__GNUC__) \|\| defined(__ICCARM__))
	#include <stdint.h>

	extern uint32_t SystemCoreClock;
	#endif

	// <o>Minimal stack size [words] <0-65535>
	// <i> Stack for idle task and default task stack in words.
	// <i> Default: 128
	#define configMINIMAL_STACK_SIZE ((uint16_t)(4 * 1024))

	// <o>Total heap size [bytes] <0-0xFFFFFFFF>
	// <i> Heap memory size in bytes.
	// <i> Default: 8192
	#define configTOTAL_HEAP_SIZE ((size_t) 8192)

	// <o>Kernel tick frequency [Hz] <0-0xFFFFFFFF>
	// <i> Kernel tick rate in Hz.
	// <i> Default: 1000
	#define configTICK_RATE_HZ ((TickType_t) 1000)

	// <o>Timer task stack depth [words] <0-65535>
	// <i> Stack for timer task in words.
	// <i> Default: 80
	#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE

	// <o>Timer task priority <0-56>
	// <i> Timer task priority.
	// <i> Default: 40 (High)
	#define configTIMER_TASK_PRIORITY 40

	// <o>Timer queue length <0-1024>
	// <i> Timer command queue length.
	// <i> Default: 5
	#define configTIMER_QUEUE_LENGTH 5

	// <o>Preemption interrupt priority
	// <i> Maximum priority of interrupts that are safe to call FreeRTOS API.
	// <i> Default: 16
	#define configMAX_SYSCALL_INTERRUPT_PRIORITY (5 << (8 - configPRIO_BITS))

	// <q>Use time slicing
	// <i> Enable setting to use timeslicing.
	// <i> Default: 1
	#define configUSE_TIME_SLICING 1

	// <q>Idle should yield
	// <i> Control Yield behaviour of the idle task.
	// <i> Default: 1
	#define configIDLE_SHOULD_YIELD 1

	// <o>Check for stack overflow
	// <0=>Disable <1=>Method one <2=>Method two
	// <i> Enable or disable stack overflow checking.
	// <i> Callback function vApplicationStackOverflowHook implementation is required when stack checking is enabled.
	// <i> Default: 0
	#define configCHECK_FOR_STACK_OVERFLOW 2

	// <q>Use idle hook
	// <i> Enable callback function call on each idle task iteration.
	// <i> Callback function vApplicationIdleHook implementation is required when idle hook is enabled.
	// <i> Default: 0
	#define configUSE_IDLE_HOOK 0

	// <q>Use tick hook
	// <i> Enable callback function call during each tick interrupt.
	// <i> Callback function vApplicationTickHook implementation is required when tick hook is enabled.
	// <i> Default: 0
	#define configUSE_TICK_HOOK 0

	// <q>Use deamon task startup hook
	// <i> Enable callback function call when timer service starts.
	// <i> Callback function vApplicationDaemonTaskStartupHook implementation is required when deamon task startup hook is
	// enabled. <i> Default: 0
	#define configUSE_DAEMON_TASK_STARTUP_HOOK 0

	// <q>Use malloc failed hook
	// <i> Enable callback function call when out of dynamic memory.
	// <i> Callback function vApplicationMallocFailedHook implementation is required when malloc failed hook is enabled.
	// <i> Default: 0
	#define configUSE_MALLOC_FAILED_HOOK 0

	// <o>Queue registry size
	// <i> Define maximum number of queue objects registered for debug purposes.
	// <i> The queue registry is used by kernel aware debuggers to locate queue and semaphore structures and display
	// associated text names. <i> Default: 0
	#define configQUEUE_REGISTRY_SIZE 0

	// <h>Event Recorder configuration
	// <i> Initialize and setup Event Recorder level filtering.
	// <i> Settings have no effect when Event Recorder is not present.

	// <q>Initialize Event Recorder
	// <i> Initialize Event Recorder before FreeRTOS kernel start.
	// <i> Default: 1
	#define configEVR_INITIALIZE 1

	// <e>Setup recording level filter
	// <i> Enable configuration of FreeRTOS events recording level
	// <i> Default: 1
	#define configEVR_SETUP_LEVEL 1

	// <o>Tasks functions
	// <i> Define event recording level bitmask for events generated from Tasks functions.
	// <i> Default: 0x05
	// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
	#define configEVR_LEVEL_TASKS 0x05

	// <o>Queue functions
	// <i> Define event recording level bitmask for events generated from Queue functions.
	// <i> Default: 0x05
	// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
	#define configEVR_LEVEL_QUEUE 0x05

	// <o>Timer functions
	// <i> Define event recording level bitmask for events generated from Timer functions.
	// <i> Default: 0x05
	// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
	#define configEVR_LEVEL_TIMERS 0x05

	// <o>Event Groups functions
	// <i> Define event recording level bitmask for events generated from Event Groups functions.
	// <i> Default: 0x05
	// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
	#define configEVR_LEVEL_EVENTGROUPS 0x05

	// <o>Heap functions
	// <i> Define event recording level bitmask for events generated from Heap functions.
	// <i> Default: 0x05
	// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
	#define configEVR_LEVEL_HEAP 0x05

	// <o>Stream Buffer functions
	// <i> Define event recording level bitmask for events generated from Stream Buffer functions.
	// <i> Default: 0x05
	// <0x00=>Off <0x01=>Errors <0x05=>Errors + Operation <0x0F=>All
	#define configEVR_LEVEL_STREAMBUFFER 0x05
	// </e>
	// </h>

	// <h> Port Specific Features
	// <i> Enable and configure port specific features.
	// <i> Check FreeRTOS documentation for definitions that apply for the used port.

	// <q>Use Floating Point Unit
	// <i> Using Floating Point Unit (FPU) affects context handling.
	// <i> Enable FPU when application uses floating point operations.
	// <i> Default: 1
	#define configENABLE_FPU 1

	// <q>Use Memory Protection Unit
	// <i> Using Memory Protection Unit (MPU) requires detailed memory map definition.
	// <i> This setting is only releavant for MPU enabled ports.
	// <i> Default: 0
	#define configENABLE_MPU 0

	// <q> Use TrustZone Secure Side Only
	// <i> This settings prevents FreeRTOS contex switch to Non-Secure side.
	// <i> Enable this setting when FreeRTOS runs on the Secure side only.
	#define configRUN_FREERTOS_SECURE_ONLY CONFIG_RUN_FREERTOS_SECURE_ONLY

	// <q>Use TrustZone Security Extension
	// <i> Using TrustZone affects context handling.
	// <i> Enable TrustZone when FreeRTOS runs on the Non-Secure side and calls functions from the Secure side.
	// <i> Default: 1
	#define configENABLE_TRUSTZONE 0

	// <o>Minimal secure stack size [words] <0-65535>
	// <i> Stack for idle task Secure side context in words.
	// <i> This setting is only relevant when TrustZone extension is enabled.
	// <i> Default: 128
	#define configMINIMAL_SECURE_STACK_SIZE ((uint32_t) 128)
	// </h>

	#ifdef __NVIC_PRIO_BITS
	#define configPRIO_BITS __NVIC_PRIO_BITS
	#else
	#define configPRIO_BITS 4
	#endif

	//------------- <<< end of configuration section >>> ---------------------------

	/* Defines needed by FreeRTOS to implement CMSIS RTOS2 API. Do not change! */
	#define configCPU_CLOCK_HZ (SystemCoreClock)
	#define configSUPPORT_STATIC_ALLOCATION 1
	#define configSUPPORT_DYNAMIC_ALLOCATION 1
	#define configUSE_PREEMPTION 1
	#define configUSE_TIMERS 1
	#define configUSE_MUTEXES 1
	#define configUSE_RECURSIVE_MUTEXES 1
	#define configUSE_COUNTING_SEMAPHORES 1
	#define configUSE_TASK_NOTIFICATIONS 1
	#define configUSE_TRACE_FACILITY 1
	#define configUSE_16_BIT_TICKS 0
	#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
	#define configMAX_PRIORITIES 56
	#define configKERNEL_INTERRUPT_PRIORITY (0x07 << (8 - configPRIO_BITS))

	/* Defines that include FreeRTOS functions which implement CMSIS RTOS2 API. Do not change! */
	#define INCLUDE_xEventGroupSetBitsFromISR 1
	#define INCLUDE_xSemaphoreGetMutexHolder 1
	#define INCLUDE_vTaskDelay 1
	#define INCLUDE_xTaskDelayUntil 1
	#define INCLUDE_vTaskDelete 1
	#define INCLUDE_xTaskGetCurrentTaskHandle 1
	#define INCLUDE_xTaskGetSchedulerState 1
	#define INCLUDE_uxTaskGetStackHighWaterMark 1
	#define INCLUDE_uxTaskPriorityGet 1
	#define INCLUDE_vTaskPrioritySet 1
	#define INCLUDE_eTaskGetState 1
	#define INCLUDE_vTaskSuspend 1
	#define INCLUDE_xTimerPendFunctionCall 1

	/* Map the FreeRTOS port interrupt handlers to their CMSIS standard names. */
	#define xPortPendSVHandler PendSV_Handler
	#define vPortSVCHandler SVC_Handler

	/* Ensure Cortex-M port compatibility. */
	#define SysTick_Handler xPortSysTickHandler

	#include "RTE_Components.h"
	#include CMSIS_device_header

	#endif /* FREERTOS_CONFIG_H */