| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| 24.1.10. [TC-CADMIN-1.10] Device exit commissioning mode after 20 failed |
| commission attempts [BCM] [DUT - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| |
| config: |
| nodeId: 0x12344321 |
| timeout: 700 |
| nodeIdForDuplicateCommissioning: |
| type: node_id |
| defaultValue: 0x11 |
| nodeId2: |
| type: node_id |
| defaultValue: 0xCAFE |
| nodeId3: |
| type: node_id |
| defaultValue: 0xC00FEE |
| endpoint: 0 |
| discriminator: |
| type: int16u |
| defaultValue: 3840 |
| correctPayload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00KA0648G00" |
| incorrectSetupCodePayload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00I.0648G00" |
| |
| tests: |
| - label: "TH_CR1 starts a commissioning process with DUT_CE" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: |
| "Open commissioning window exactly like we plan to later to verify |
| that `correctPayload` can in fact commision the device." |
| cluster: "AdministratorCommissioning" |
| command: "OpenBasicCommissioningWindow" |
| PICS: CADMIN.S.C01.Rsp |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 900 |
| |
| - label: |
| "Temporarily commission device with `correctPayload` just like we will |
| try to later" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| # Only run this if we ran the previous step. |
| PICS: CADMIN.S && CADMIN.S.C01.Rsp |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: correctPayload |
| |
| - label: "Wait for a CASE session" |
| identity: "beta" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| |
| - label: "Read FabricIndex of beta so we can delete the temp fabric" |
| identity: "beta" |
| cluster: "Operational Credentials" |
| command: "readAttribute" |
| attribute: "CurrentFabricIndex" |
| # Only run this if we commissioned the device. |
| PICS: CADMIN.S.C01.Rsp |
| response: |
| saveAs: tempFabricIndex |
| |
| - label: "Remove the temp fabric" |
| cluster: "Operational Credentials" |
| command: "RemoveFabric" |
| # Only run this if we commissioned the device. |
| PICS: CADMIN.S.C01.Rsp |
| arguments: |
| values: |
| - name: "FabricIndex" |
| value: tempFabricIndex |
| |
| - label: "TH_CR1 opens a commissioning window on DUT_CE" |
| cluster: "AdministratorCommissioning" |
| command: "OpenBasicCommissioningWindow" |
| PICS: CADMIN.S.C01.Rsp |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 900 |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE using Invalid setup |
| code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| response: |
| error: FAILURE |
| |
| # This step must match the verification step above where we checked `correctPayload` |
| - label: |
| "TH_CR2 attempts to do PASE to DUT_CE using the correct onboarding |
| payload" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: correctPayload |
| response: |
| error: FAILURE |
