| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.18. [TC-CADMIN-1.18] Removing Fabrics from DUT and Fabric index |
| enumeration using BCM [DUT - Commissioner] |
| |
| PICS: |
| - CADMIN.C |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Reset DUT_CR1 to factory defaults" |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: "DUT_CR1 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| "1. Provision the device using DUT controller chip tool(use above instructions) , |
| " |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On your first controller chip tool, open commissioning window |
| |
| Below is the example when using chip tool as controller |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 |
| |
| |
| CHIP: [DMG] InvokeResponseMessage = |
| [1648116114630] [6871:3898916] CHIP: [DMG] { |
| [1648116114630] [6871:3898916] CHIP: [DMG] suppressResponse = false, |
| [1648116114630] [6871:3898916] CHIP: [DMG] InvokeResponseIBs = |
| [1648116114630] [6871:3898916] CHIP: [DMG] [ |
| [1648116114630] [6871:3898916] CHIP: [DMG] InvokeResponseIB = |
| [1648116114630] [6871:3898916] CHIP: [DMG] { |
| [1648116114630] [6871:3898916] CHIP: [DMG] CommandStatusIB = |
| [1648116114630] [6871:3898916] CHIP: [DMG] { |
| [1648116114630] [6871:3898916] CHIP: [DMG] CommandPathIB = |
| [1648116114630] [6871:3898916] CHIP: [DMG] { |
| [1648116114630] [6871:3898916] CHIP: [DMG] EndpointId = 0x0, |
| [1648116114630] [6871:3898916] CHIP: [DMG] ClusterId = 0x3c, |
| [1648116114630] [6871:3898916] CHIP: [DMG] CommandId = 0x1, |
| [1648116114630] [6871:3898916] CHIP: [DMG] }, |
| [1648116114630] [6871:3898916] CHIP: [DMG] |
| [1648116114630] [6871:3898916] CHIP: [DMG] StatusIB = |
| [1648116114631] [6871:3898916] CHIP: [DMG] { |
| [1648116114631] [6871:3898916] CHIP: [DMG] status = 0x0, |
| [1648116114631] [6871:3898916] CHIP: [DMG] }, |
| [1648116114631] [6871:3898916] CHIP: [DMG] |
| [1648116114631] [6871:3898916] CHIP: [DMG] }, |
| [1648116114631] [6871:3898916] CHIP: [DMG] |
| [1648116114631] [6871:3898916] CHIP: [DMG] }, |
| [1648116114631] [6871:3898916] CHIP: [DMG] |
| [1648116114631] [6871:3898916] CHIP: [DMG] ], |
| [1648116114631] [6871:3898916] CHIP: [DMG] |
| [1648116114631] [6871:3898916] CHIP: [DMG] InteractionModelRevision = 1 |
| [1648116114631] [6871:3898916] CHIP: [DMG] }, |
| [1648116114631] [6871:3898916] CHIP: [DMG] Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| disabled: true |
| |
| - label: "TH_CR2 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| On 2nd controller using chip tool connect to the accessory |
| |
| |
| ./chip-tool pairing onnetwork 1 20202021 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On your first controller chip tool, open commissioning window |
| |
| Below is the example when using chip tool as controller |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 |
| |
| |
| CHIP: [DMG] InvokeResponseMessage = |
| [1648116114630] [6871:3898916] CHIP: [DMG] { |
| [1648116114630] [6871:3898916] CHIP: [DMG] suppressResponse = false, |
| [1648116114630] [6871:3898916] CHIP: [DMG] InvokeResponseIBs = |
| [1648116114630] [6871:3898916] CHIP: [DMG] [ |
| [1648116114630] [6871:3898916] CHIP: [DMG] InvokeResponseIB = |
| [1648116114630] [6871:3898916] CHIP: [DMG] { |
| [1648116114630] [6871:3898916] CHIP: [DMG] CommandStatusIB = |
| [1648116114630] [6871:3898916] CHIP: [DMG] { |
| [1648116114630] [6871:3898916] CHIP: [DMG] CommandPathIB = |
| [1648116114630] [6871:3898916] CHIP: [DMG] { |
| [1648116114630] [6871:3898916] CHIP: [DMG] EndpointId = 0x0, |
| [1648116114630] [6871:3898916] CHIP: [DMG] ClusterId = 0x3c, |
| [1648116114630] [6871:3898916] CHIP: [DMG] CommandId = 0x1, |
| [1648116114630] [6871:3898916] CHIP: [DMG] }, |
| [1648116114630] [6871:3898916] CHIP: [DMG] |
| [1648116114630] [6871:3898916] CHIP: [DMG] StatusIB = |
| [1648116114631] [6871:3898916] CHIP: [DMG] { |
| [1648116114631] [6871:3898916] CHIP: [DMG] status = 0x0, |
| [1648116114631] [6871:3898916] CHIP: [DMG] }, |
| [1648116114631] [6871:3898916] CHIP: [DMG] |
| [1648116114631] [6871:3898916] CHIP: [DMG] }, |
| [1648116114631] [6871:3898916] CHIP: [DMG] |
| [1648116114631] [6871:3898916] CHIP: [DMG] }, |
| [1648116114631] [6871:3898916] CHIP: [DMG] |
| [1648116114631] [6871:3898916] CHIP: [DMG] ], |
| [1648116114631] [6871:3898916] CHIP: [DMG] |
| [1648116114631] [6871:3898916] CHIP: [DMG] InteractionModelRevision = 1 |
| [1648116114631] [6871:3898916] CHIP: [DMG] }, |
| [1648116114631] [6871:3898916] CHIP: [DMG] Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| disabled: true |
| |
| - label: "TH_CR3 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| On 3rd controller using chip tool connect to the accessory |
| |
| |
| ./chip-tool pairing onnetwork 1 20202021 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to read the list of Fabrics on TH_CE" |
| PICS: OPCREDS.C.A0001 |
| verification: | |
| On first controller, read fabrics list |
| |
| ./chip-tool operationalcredentials read fabrics 1234 0 --fabric-filtered 0 |
| |
| |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 2455995193 |
| CHIP:TOO: Fabrics: 3 entries |
| CHIP:TOO: [1]: { |
| CHIP:TOO: RootPublicKey: 04656F56DBDB677DC957028DFC0ED76709C72753C9194B117A483BDC07386BFD9529B68EB4448FBBA3964EFF37A56A8F461D348B0DAF3B56A75F3B94BF8209D36F |
| CHIP:TOO: VendorId: 65521 |
| CHIP:TOO: FabricId: 1 |
| CHIP:TOO: NodeId: 1 |
| CHIP:TOO: Label: |
| CHIP:TOO: FabricIndex: 1 |
| CHIP:TOO: } |
| CHIP:TOO: [2]: { |
| CHIP:TOO: RootPublicKey: 04F8F28D5D70A4510E0F72FBBA31369796C4206FF95D97B77C1BDFD0438A3BE43510631A1B915BE189323F4CC0E015480192654D8170F8F230C7713898962958B7 |
| CHIP:TOO: VendorId: 65521 |
| CHIP:TOO: FabricId: 1 |
| CHIP:TOO: NodeId: 2 |
| CHIP:TOO: Label: |
| CHIP:TOO: FabricIndex: 2 |
| CHIP:TOO: } |
| CHIP:TOO: [3]: { |
| CHIP:TOO: RootPublicKey: 04F8F28D5D70A4510E0F72FBBA31369796C4206FF95D97B77C1BDFD0438A3BE43510631A1B915BE189323F4CC0E015480192654D8170F8F230C7713898962958B7 |
| CHIP:TOO: VendorId: 65521 |
| CHIP:TOO: FabricId: 1 |
| CHIP:TOO: NodeId: 3 |
| CHIP:TOO: Label: |
| CHIP:TOO: FabricIndex: 3 |
| CHIP:TOO: } |
| CHIP:EM: Sending Standalone Ack for MessageCounter:9143157 on exchange 1147i |
| " |
| disabled: true |
| |
| - label: "DUT_CR1 sends RemoveFabric with FabricIndex = 2 command to TH_CE" |
| PICS: OPCREDS.C.C0a.Tx |
| verification: | |
| on 2nd controller using chip tool, remove fabric with FabricIndex=2 |
| |
| ./chip-tool operationalcredentials remove-fabric 2 1 0 |
| |
| CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_003E Command=0x0000_0008 |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Command 0x0000_0008 |
| CHIP:TOO: NOCResponse: { |
| CHIP:TOO: statusCode: 0 |
| CHIP:TOO: fabricIndex: 2 |
| CHIP:TOO: } |
| CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "TH_CR2 sends command to TH_CE to write and read the Basic Information |
| Clusters NodeLabel mandatory attribute" |
| PICS: BINFO.C.A0005 |
| verification: | |
| Using your 2nd controller, write attribute and read attribute to and from TH_CE |
| |
| Below is the example while using chip tool on second controller, |
| ./chip-tool basic write node-label te5new 2 0 |
| |
| Received error (protocol code 2) during pairing process. ../../third_party/connectedhomeip/src/protocols/secure_channel/CASESession.cpp:1551: CHIP Error 0x00000054: Invalid CASE parameter |
| [1651819620.929567][4359:4364] CHIP:CTL: OperationalSessionSetup[B8070CD13C99D367:0000000000000002]: State change 3 --> 2 |
| [1651819620.929700][4359:4364] CHIP:-: ../../third_party/connectedhomeip/src/protocols/secure_channel/CASESession.cpp:1551: CHIP Error 0x00000054: Invalid CASE parameter at ../../commands/clusters/ModelCommand.cpp:53 |
| |
| ./chip-tool basic read node-label 2 0 |
| |
| Received error (protocol code 2) during pairing process. ../../third_party/connectedhomeip/src/protocols/secure_channel/CASESession.cpp:1551: CHIP Error 0x00000054: Invalid CASE parameter |
| [1651819620.929567][4359:4364] CHIP:CTL: OperationalSessionSetup[B8070CD13C99D367:0000000000000002]: State change 3 --> 2 |
| [1651819620.929700][4359:4364] CHIP:-: ../../third_party/connectedhomeip/src/protocols/secure_channel/CASESession.cpp:1551: CHIP Error 0x00000054: Invalid CASE parameter at ../../commands/clusters/ModelCommand.cpp:53 |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read the list of Fabrics" |
| PICS: OPCREDS.C.A0001 |
| verification: | |
| On first controller, read fabrics list |
| |
| Below is the command using chip tool controller |
| |
| ./chip-tool operationalcredentials read fabrics 1234 0 --fabric-filtered 0 |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 2455995219 |
| [1647863260.286772][9294:9299] CHIP:TOO: Fabrics: 2 entries |
| [1647863260.286908][9294:9299] CHIP:TOO: [1]: { |
| [1647863260.286947][9294:9299] CHIP:TOO: RootPublicKey: 04656F56DBDB677DC957028DFC0ED76709C72753C9194B117A483BDC07386BFD9529B68EB4448FBBA3964EFF37A56A8F461D348B0DAF3B56A75F3B94BF8209D36F |
| [1647863260.286995][9294:9299] CHIP:TOO: VendorId: 65521 |
| [1647863260.287026][9294:9299] CHIP:TOO: FabricId: 1 |
| [1647863260.287055][9294:9299] CHIP:TOO: NodeId: 1 |
| [1647863260.287084][9294:9299] CHIP:TOO: Label: |
| [1647863260.287113][9294:9299] CHIP:TOO: FabricIndex: 1 |
| [1647863260.287144][9294:9299] CHIP:TOO: } |
| [1647863260.287185][9294:9299] CHIP:TOO: [2]: { |
| [1647863260.287221][9294:9299] CHIP:TOO: RootPublicKey: 04F8F28D5D70A4510E0F72FBBA31369796C4206FF95D97B77C1BDFD0438A3BE43510631A1B915BE189323F4CC0E015480192654D8170F8F230C7713898962958B7 |
| [1647863260.287253][9294:9299] CHIP:TOO: VendorId: 65521 |
| [1647863260.287282][9294:9299] CHIP:TOO: FabricId: 1 |
| [1647863260.287310][9294:9299] CHIP:TOO: NodeId: 3 |
| [1647863260.287339][9294:9299] CHIP:TOO: Label: |
| [1647863260.287368][9294:9299] CHIP:TOO: FabricIndex: 3 |
| [1647863260.287396][9294:9299] CHIP:TOO: } |
| [1647863260.287515][9294:9299] CHIP:EM: Sending Standalone Ack for MessageCounter:11301761 on exchange 13180i |
| disabled: true |
| |
| - label: |
| "Verify TH_CE is now discoverable over DNS-SD with 2 Operational |
| service records (_matter._tcp SRV records)." |
| verification: | |
| 1. Verify if the DUT is broadcasting using |
| grl@grl-ThinkPad-L480:~/may16_cntrl03/connectedhomeip/examples/chip-tool/out/debug$ avahi-browse -rt _matter._tcp |
| + wlp5s0 IPv6 8E50A59FAF52A809-0000000000000001 _matter._tcp local |
| + wlp5s0 IPv6 03E707466A904C7E-0000000000000003 _matter._tcp local |
| = wlp5s0 IPv6 8E50A59FAF52A809-0000000000000001 _matter._tcp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["T=1" "SAI=300" "SII=5000"] |
| = wlp5s0 IPv6 03E707466A904C7E-0000000000000003 _matter._tcp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["T=1" "SAI=300" "SII=5000"] |
| grl@grl-ThinkPad-L480:~/may16_cntrl03/connectedhomeip/examples/chip-tool/out/debug$ |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On first controller chip tool, open commissioning window |
| |
| Below is the example when using chip tool as controller |
| |
| For BCM, |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650278416.248379][11064:11069] CHIP:DMG: { |
| [1650278416.248436][11064:11069] CHIP:DMG: suppressResponse = false, |
| [1650278416.248495][11064:11069] CHIP:DMG: InvokeResponseIBs = |
| [1650278416.248570][11064:11069] CHIP:DMG: [ |
| [1650278416.248630][11064:11069] CHIP:DMG: InvokeResponseIB = |
| [1650278416.248718][11064:11069] CHIP:DMG: { |
| [1650278416.248783][11064:11069] CHIP:DMG: CommandStatusIB = |
| [1650278416.248860][11064:11069] CHIP:DMG: { |
| [1650278416.248931][11064:11069] CHIP:DMG: CommandPathIB = |
| [1650278416.249011][11064:11069] CHIP:DMG: { |
| [1650278416.249100][11064:11069] CHIP:DMG: EndpointId = 0x0, |
| [1650278416.249186][11064:11069] CHIP:DMG: ClusterId = 0x3c, |
| [1650278416.249268][11064:11069] CHIP:DMG: CommandId = 0x1, |
| [1650278416.249347][11064:11069] CHIP:DMG: }, |
| [1650278416.249430][11064:11069] CHIP:DMG: |
| [1650278416.249501][11064:11069] CHIP:DMG: StatusIB = |
| [1650278416.249581][11064:11069] CHIP:DMG: { |
| [1650278416.249664][11064:11069] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1650278416.249738][11064:11069] CHIP:DMG: }, |
| [1650278416.249823][11064:11069] CHIP:DMG: |
| [1650278416.249889][11064:11069] CHIP:DMG: }, |
| [1650278416.249969][11064:11069] CHIP:DMG: |
| [1650278416.250035][11064:11069] CHIP:DMG: }, |
| [1650278416.250113][11064:11069] CHIP:DMG: |
| [1650278416.250169][11064:11069] CHIP:DMG: ], |
| [1650278416.250241][11064:11069] CHIP:DMG: |
| [1650278416.250298][11064:11069] CHIP:DMG: InteractionModelRevision = 1 |
| [1650278416.250355][11064:11069] CHIP:DMG: }, |
| [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: "TH_CR2 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| On 2nd controller using chip tool connect to the accessory |
| |
| |
| ./chip-tool pairing onnetwork 1 20202021 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: "TH_CR2 sends command to TH_CE to read the list of Fabrics" |
| PICS: OPCREDS.C.A0001 |
| verification: | |
| On second controller, read fabrics list |
| |
| Below is the command using chip tool controller |
| |
| ./chip-tool operationalcredentials read fabrics 1234 0 --fabric-filtered 0 |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 2455995246 |
| [1647863342.980899][9309:9314] CHIP:TOO: Fabrics: 3 entries |
| [1647863342.981158][9309:9314] CHIP:TOO: [1]: { |
| [1647863342.981231][9309:9314] CHIP:TOO: RootPublicKey: 04656F56DBDB677DC957028DFC0ED76709C72753C9194B117A483BDC07386BFD9529B68EB4448FBBA3964EFF37A56A8F461D348B0DAF3B56A75F3B94BF8209D36F |
| [1647863342.981322][9309:9314] CHIP:TOO: VendorId: 65521 |
| [1647863342.981380][9309:9314] CHIP:TOO: FabricId: 1 |
| [1647863342.981434][9309:9314] CHIP:TOO: NodeId: 1 |
| [1647863342.981486][9309:9314] CHIP:TOO: Label: |
| [1647863342.981539][9309:9314] CHIP:TOO: FabricIndex: 1 |
| [1647863342.981594][9309:9314] CHIP:TOO: } |
| [1647863342.981671][9309:9314] CHIP:TOO: [2]: { |
| [1647863342.981737][9309:9314] CHIP:TOO: RootPublicKey: 04F8F28D5D70A4510E0F72FBBA31369796C4206FF95D97B77C1BDFD0438A3BE43510631A1B915BE189323F4CC0E015480192654D8170F8F230C7713898962958B7 |
| [1647863342.981796][9309:9314] CHIP:TOO: VendorId: 65521 |
| [1647863342.981849][9309:9314] CHIP:TOO: FabricId: 1 |
| [1647863342.981901][9309:9314] CHIP:TOO: NodeId: 3 |
| [1647863342.981952][9309:9314] CHIP:TOO: Label: |
| [1647863342.982005][9309:9314] CHIP:TOO: FabricIndex: 3 |
| [1647863342.982057][9309:9314] CHIP:TOO: } |
| [1647863342.982131][9309:9314] CHIP:TOO: [3]: { |
| [1647863342.982195][9309:9314] CHIP:TOO: RootPublicKey: 04F8F28D5D70A4510E0F72FBBA31369796C4206FF95D97B77C1BDFD0438A3BE43510631A1B915BE189323F4CC0E015480192654D8170F8F230C7713898962958B7 |
| [1647863342.982252][9309:9314] CHIP:TOO: VendorId: 65521 |
| [1647863342.982305][9309:9314] CHIP:TOO: FabricId: 1 |
| [1647863342.982357][9309:9314] CHIP:TOO: NodeId: 2 |
| [1647863342.982409][9309:9314] CHIP:TOO: Label: |
| [1647863342.982460][9309:9314] CHIP:TOO: FabricIndex: 4 |
| [1647863342.982512][9309:9314] CHIP:TOO: } |
| [1647863342.982738][9309:9314] CHIP:EM: Sending Standalone Ack for MessageCounter:5772016 on exchange 3310i |
| disabled: true |