| /* |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * Copyright (c) 2020 Texas Instruments Incorporated |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| |
| /* Modules */ |
| var AESCCM = scripting.addModule("/ti/drivers/AESCCM"); |
| var AESECB = scripting.addModule("/ti/drivers/AESECB"); |
| var NVS = scripting.addModule("/ti/drivers/NVS"); |
| var RF = scripting.addModule("/ti/drivers/RF"); |
| var RFDesign = scripting.addModule("ti/devices/radioconfig/rfdesign"); |
| var RFCustom = scripting.addModule("/ti/devices/radioconfig/custom"); |
| var TRNG = scripting.addModule("/ti/drivers/TRNG"); |
| var SHA2 = scripting.addModule("/ti/drivers/SHA2"); |
| var UART2 = scripting.addModule("/ti/drivers/UART2"); |
| var ble = scripting.addModule("/ti/ble5stack/ble"); |
| var dmm = scripting.addModule("/ti/dmm/dmm"); |
| var AESCTRDRBG = scripting.addModule("/ti/drivers/AESCTRDRBG"); |
| var ECDH = scripting.addModule("/ti/drivers/ECDH"); |
| |
| /* Instances */ |
| var AESCCM1 = AESCCM.addInstance(); |
| var AESECB1 = AESECB.addInstance(); |
| var AESECB2 = AESECB.addInstance(); |
| var NVS1 = NVS.addInstance(); |
| var NVS2 = NVS.addInstance(); |
| var SHA21 = SHA2.addInstance(); |
| var TRNG1 = TRNG.addInstance(); |
| var TRNG2 = TRNG.addInstance(); |
| var TRNG3 = TRNG.addInstance(); |
| var UART2 = UART2.addInstance(); |
| var AESCTRDRBG1 = AESCTRDRBG.addInstance(); |
| var ECDH1 = ECDH.addInstance(); |
| |
| AESCTRDRBG1.$name = "CONFIG_AESCTRDRBG_0"; |
| |
| AESCCM1.$name = "CONFIG_AESCCM0"; |
| |
| AESECB1.$name = "CONFIG_AESECB0"; |
| AESECB2.$name = "CONFIG_AESECB_1"; |
| |
| ECDH1.$name = "CONFIG_ECDH0"; |
| |
| /* ======== CCFG ======== */ |
| var CCFG = scripting.addModule("/ti/devices/CCFG"); |
| const ccfgSettings = system.getScript("/ti/common/lprf_ccfg_settings.js").ccfgSettings; |
| for(var setting in ccfgSettings) |
| { |
| CCFG[setting] = ccfgSettings[setting]; |
| } |
| |
| CCFG.enableCodeGeneration = true; |
| |
| /* NVS */ |
| NVS1.$name = "CONFIG_NVSINTERNAL"; |
| NVS1.internalFlash.regionBase = 0xAA000; |
| NVS1.internalFlash.regionSize = 0x4000; |
| |
| NVS2.$name = "CONFIG_NVSEXTERNAL"; |
| NVS2.nvsType = "External"; // NVS Region Type |
| NVS2.$hardware = system.deviceData.board.components.MX25R8035F; |
| |
| /* RF */ |
| /* if an antenna component exists, assign it to the rf instance */ |
| if (system.deviceData.board && system.deviceData.board.components.RF) { |
| RF.$hardware = system.deviceData.board.components.RF; |
| } |
| |
| const rfDesignSettings = system.getScript("/ti/common/lprf_rf_design_settings.js").rfDesignSettings; |
| for(var setting in rfDesignSettings) |
| { |
| RFDesign[setting] = rfDesignSettings[setting]; |
| } |
| |
| |
| /* Handling for RF frontend characterization */ |
| if(RFDesign.rfDesign.match(/LP_CC2652PSIP/)) |
| { |
| RFCustom.ieee = ["ieee154p10"]; |
| var rfCodeExportConfig = RFCustom.radioConfigieee154p10.codeExportConfig |
| } |
| else |
| { |
| RFCustom.ieee = ["ieee154"]; |
| var rfCodeExportConfig = RFCustom.radioConfigieee154.codeExportConfig |
| } |
| |
| var cmdList = [ |
| "cmdIeeeTx", |
| "cmdIeeeRx", |
| "cmdIeeeCsma", |
| "cmdIeeeEdScan", |
| "cmdIeeeRxAck", |
| "cmdTxTest" |
| ]; |
| |
| rfCodeExportConfig.useConst = true; |
| rfCodeExportConfig.useMulti = true; |
| rfCodeExportConfig.symGenMethod = "Custom"; |
| |
| const deviceId = system.deviceData.deviceId; |
| |
| // Add high PA options if present |
| if(deviceId.match(/CC(265[12]R|2674R|1352R1|1354R)/)) |
| { |
| cmdList.push("cmdRadioSetup"); |
| rfCodeExportConfig.cmdRadioSetup = "RF_cmdIeeeRadioSetup"; |
| } |
| else if(deviceId.match(/CC(265[12]P|2674P|1352P)/)) |
| { |
| cmdList.push("cmdRadioSetupPa"); |
| rfCodeExportConfig.cmdRadioSetupPa = "RF_cmdIeeeRadioSetup"; |
| rfCodeExportConfig.paExport = "combined"; |
| } |
| else if(deviceId.match(/CC(265[34]|1354)P/)) |
| { |
| cmdList.push("cmdRadioSetupPa"); |
| rfCodeExportConfig.cmdRadioSetupPa = "RF_cmdIeeeRadioSetup"; |
| // currently not characterized for high PA |
| } |
| else |
| { |
| throw new Error("Could not match platform to any known platform types"); |
| } |
| |
| rfCodeExportConfig.cmdList_ieee_15_4 = cmdList; |
| |
| /* Debug UART */ |
| UART2.$hardware = system.deviceData.board.components.XDS110UART; |
| UART2.$name = "CONFIG_UART_STREAMER"; |
| |
| /* TRNG */ |
| TRNG1.$name = "CONFIG_TRNG_0"; |
| TRNG2.$name = "CONFIG_TRNG_THREAD"; |
| TRNG3.$name = "CONFIG_TRNG_APP"; |
| |
| /* BLE */ |
| ble.addressMode = "ADDRMODE_RP_WITH_PUBLIC_ID"; |
| ble.maxConnNum = 1; |
| ble.numOfAdvSets = 1; |
| ble.lockProject = true; |
| ble.oneLibSizeOpt = true; |
| ble.maxPDUSize = 255; |
| ble.radioConfig.codeExportConfig.$name = "ti_devices_radioconfig_code_export_param2"; |
| ble.connUpdateParamsPeripheral.$name = "ti_ble5stack_general_ble_conn_update_params0"; |
| ble.connUpdateParamsPeripheral.reqMinConnInt = 30; |
| ble.connUpdateParamsPeripheral.reqMaxConnInt = 50; |
| |
| ble.advSet1.$name = "ti_ble5stack_broadcaster_advertisement_set0"; |
| ble.advSet1.advParam1.$name = "ti_ble5stack_broadcaster_advertisement_params0"; |
| |
| /* DMM */ |
| dmm.project = "ti_thread_thermostat_remote_display"; |
| dmm.stackRoles = ["blePeripheral","threadFTD"]; |
| dmm.lockStackRoles = true; |
| dmm.numApplicationStates = 10; |
| dmm.applicationState0 = "ANY"; |
| dmm.applicationState1 = "DMMPOLICY_BLE_IDLE"; |
| dmm.applicationState2 = "DMMPOLICY_BLE_ADV"; |
| dmm.applicationState3 = "DMMPOLICY_BLE_CONNECTING"; |
| dmm.applicationState4 = "DMMPOLICY_BLE_HIGH_BANDWIDTH"; |
| dmm.applicationState5 = "DMMPOLICY_BLE_CONNECTED"; |
| dmm.applicationState6 = "DMMPOLICY_BLE_OAD"; |
| dmm.applicationState7 = "DMMPOLICY_THREAD_IDLE"; |
| dmm.applicationState8 = "DMMPOLICY_THREAD_LINK_EST"; |
| dmm.applicationState9 = "DMMPOLICY_THREAD_DATA"; |
| dmm.policyArray.create(4); |
| dmm.policyArray[0].$name = "ti_dmm_policy_dmm_policy0"; |
| dmm.policyArray[0].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble0"; |
| dmm.policyArray[0].blePeripheral.applicationStates = ["applicationState6"]; |
| dmm.policyArray[0].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread0"; |
| dmm.policyArray[0].threadFTD.pause = "DMMPOLICY_PAUSED"; |
| dmm.policyArray[1].$name = "ti_dmm_policy_dmm_policy1"; |
| dmm.policyArray[1].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble1"; |
| dmm.policyArray[1].blePeripheral.applicationStates = ["applicationState3","applicationState4"]; |
| dmm.policyArray[1].blePeripheral.weight = 25; |
| dmm.policyArray[1].blePeripheral.appliedActivity = ["DMMPOLICY_APPLIED_ACTIVITY_BLE_CONNECTION"]; |
| dmm.policyArray[1].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread1"; |
| dmm.policyArray[2].$name = "ti_dmm_policy_dmm_policy2"; |
| dmm.policyArray[2].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble2"; |
| dmm.policyArray[2].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread2"; |
| dmm.policyArray[2].threadFTD.weight = 30; |
| dmm.policyArray[2].threadFTD.applicationStates = ["applicationState8"]; |
| dmm.policyArray[2].threadFTD.appliedActivity = ["DMMPOLICY_APPLIED_ACTIVITY_ALL"]; |
| dmm.policyArray[3].$name = "ti_dmm_policy_dmm_policy3"; |
| dmm.policyArray[3].blePeripheral.$name = "ti_dmm_policy_stack_dmm_stack_ble3"; |
| dmm.policyArray[3].threadFTD.$name = "ti_dmm_policy_stack_dmm_stack_thread3"; |
| dmm.policyArray[3].threadFTD.weight = 1; |
