| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * Provides an implementation of the BLEManager singleton object |
| * for the Qorvo QPG platforms. |
| */ |
| /* this file behaves like a config.h, comes first */ |
| #include <platform/internal/CHIPDeviceLayerInternal.h> |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
| |
| #include <ble/Ble.h> |
| #include <platform/CommissionableDataProvider.h> |
| #include <platform/internal/BLEManager.h> |
| |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| #include <setup_payload/AdditionalDataPayloadGenerator.h> |
| #if CHIP_ENABLE_ROTATING_DEVICE_ID |
| #include <platform/DeviceInstanceInfoProvider.h> |
| #endif /* CHIP_ENABLE_ROTATING_DEVICE_ID */ |
| #endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */ |
| |
| using namespace ::chip; |
| using namespace ::chip::Ble; |
| using namespace ::chip::System; |
| |
| namespace chip { |
| namespace DeviceLayer { |
| namespace Internal { |
| |
| namespace { |
| |
| // Advertising data content definitions |
| #define CHIP_ADV_DATA_TYPE_FLAGS 0x01 |
| #define CHIP_ADV_DATA_TYPE_UUID 0x03 |
| #define CHIP_ADV_DATA_FLAGS 0x06 |
| #define CHIP_ADV_DATA_TYPE_NAME 0x09 |
| #define CHIP_ADV_DATA_TYPE_SERVICE_DATA 0x16 |
| |
| #define CHIP_ADV_SHORT_UUID_LEN 2 |
| |
| // FreeeRTOS sw timer |
| TimerHandle_t sbleAdvTimeoutTimer; |
| StaticTimer_t sbleAdvTimeoutTimerBuffer; |
| |
| // Full service UUID - CHIP_BLE_SVC_ID - taken from BleUUID.h header |
| const uint8_t chipUUID_CHIPoBLE_Service[CHIP_ADV_SHORT_UUID_LEN] = { 0xFF, 0xF6 }; |
| |
| const ChipBleUUID chipUUID_CHIPoBLEChar_RX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F, |
| 0x9D, 0x11 } }; |
| |
| const ChipBleUUID chipUUID_CHIPoBLEChar_TX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F, |
| 0x9D, 0x12 } }; |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| const ChipBleUUID chipUUID_CHIPoBLEChar_C3 = { { 0x64, 0x63, 0x02, 0x38, 0x87, 0x72, 0x45, 0xF2, 0xB8, 0x7D, 0x74, 0x8A, 0x83, 0x21, |
| 0x8F, 0x04 } }; |
| #endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */ |
| |
| } // unnamed namespace |
| |
| BLEManagerImpl BLEManagerImpl::sInstance; |
| |
| CHIP_ERROR BLEManagerImpl::_Init() |
| { |
| CHIP_ERROR err; |
| |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Enabled; |
| mFlags.ClearAll().Set(Flags::kAdvertisingEnabled, CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART); |
| mFlags.Set(Flags::kFastAdvertisingEnabled); |
| mNumGAPCons = 0; |
| |
| for (int i = 0; i < kMaxConnections; i++) |
| { |
| mSubscribedConIds[i] = BLE_CONNECTION_UNINITIALIZED; |
| } |
| |
| // Initialize the CHIP BleLayer. |
| err = BleLayer::Init(this, this, &DeviceLayer::SystemLayer()); |
| SuccessOrExit(err); |
| |
| appCbacks.stackCallback = ExternalCbHandler; |
| appCbacks.chrReadCallback = HandleTXCharRead; |
| appCbacks.chrWriteCallback = HandleRXCharWrite; |
| appCbacks.cccCallback = _handleTXCharCCCDWrite; |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| qvCHIP_BleSetUUIDs(chipUUID_CHIPoBLE_Service, chipUUID_CHIPoBLEChar_TX.bytes, chipUUID_CHIPoBLEChar_RX.bytes, |
| chipUUID_CHIPoBLEChar_C3.bytes); |
| #else |
| qvCHIP_BleSetUUIDs(chipUUID_CHIPoBLE_Service, chipUUID_CHIPoBLEChar_TX.bytes, chipUUID_CHIPoBLEChar_RX.bytes, nullptr); |
| #endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */ |
| |
| qvCHIP_BleInit(&appCbacks); |
| |
| // Create FreeRTOS sw timer for BLE timeouts and interval change. |
| #if defined(CHIP_CONFIG_FREERTOS_USE_STATIC_TASK) && CHIP_CONFIG_FREERTOS_USE_STATIC_TASK |
| sbleAdvTimeoutTimer = xTimerCreateStatic("BleAdvTimer", // Just a text name, not used by the RTOS kernel |
| 1, // == default timer period (mS) |
| false, // no timer reload (==one-shot) |
| (void *) this, // init timer id = ble obj context |
| BleAdvTimeoutHandler, // timer callback handler |
| &sbleAdvTimeoutTimerBuffer // static buffer for timer |
| |
| ); |
| |
| #else |
| sbleAdvTimeoutTimer = xTimerCreate("BleAdvTimer", // Just a text name, not used by the RTOS kernel |
| 1, // == default timer period (mS) |
| false, // no timer reload (==one-shot) |
| (void *) this, // init timer id = ble obj context |
| BleAdvTimeoutHandler // timer callback handler |
| ); |
| #endif |
| VerifyOrExit(sbleAdvTimeoutTimer != NULL, err = CHIP_ERROR_INCORRECT_STATE); |
| |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| exit: |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::Init() complete"); |
| |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingEnabled(bool val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (mFlags.Has(Flags::kAdvertisingEnabled) != val) |
| { |
| mFlags.Set(Flags::kAdvertisingEnabled, val); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingMode(BLEAdvertisingMode mode) |
| { |
| switch (mode) |
| { |
| case BLEAdvertisingMode::kFastAdvertising: |
| mFlags.Set(Flags::kFastAdvertisingEnabled); |
| break; |
| case BLEAdvertisingMode::kSlowAdvertising: |
| mFlags.Clear(Flags::kFastAdvertisingEnabled); |
| break; |
| default: |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_GetDeviceName(char * buf, size_t bufSize) |
| { |
| CHIP_ERROR err; |
| |
| err = MapBLEError(qvCHIP_BleGetDeviceName(buf, bufSize)); |
| |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetDeviceName(const char * devName) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (devName != nullptr && devName[0] != 0) |
| { |
| err = MapBLEError(qvCHIP_BleSetDeviceName(devName)); |
| SuccessOrExit(err); |
| |
| mFlags.Set(Flags::kDeviceNameSet); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| void BLEManagerImpl::_OnPlatformEvent(const ChipDeviceEvent * event) |
| { |
| switch (event->Type) |
| { |
| // Platform specific events |
| case DeviceEventType::kCHIPoBLESubscribe: { |
| ChipDeviceEvent connEstEvent; |
| |
| ChipLogDetail(DeviceLayer, "_OnPlatformEvent kCHIPoBLESubscribe"); |
| HandleSubscribeReceived(event->CHIPoBLESubscribe.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| connEstEvent.Type = DeviceEventType::kCHIPoBLEConnectionEstablished; |
| PlatformMgr().PostEventOrDie(&connEstEvent); |
| } |
| break; |
| |
| case DeviceEventType::kCHIPoBLEUnsubscribe: { |
| ChipDeviceEvent connClosedEvent; |
| |
| ChipLogDetail(DeviceLayer, "_OnPlatformEvent kCHIPoBLEUnsubscribe"); |
| HandleUnsubscribeReceived(event->CHIPoBLEUnsubscribe.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| connClosedEvent.Type = DeviceEventType::kCHIPoBLEConnectionClosed; |
| PlatformMgr().PostEventOrDie(&connClosedEvent); |
| } |
| break; |
| |
| case DeviceEventType::kCHIPoBLEWriteReceived: { |
| ChipLogDetail(DeviceLayer, "_OnPlatformEvent kCHIPoBLEWriteReceived"); |
| HandleWriteReceived(event->CHIPoBLEWriteReceived.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_RX, |
| PacketBufferHandle::Adopt(event->CHIPoBLEWriteReceived.Data)); |
| } |
| break; |
| |
| case DeviceEventType::kCHIPoBLEConnectionError: { |
| ChipLogDetail(DeviceLayer, "_OnPlatformEvent kCHIPoBLEConnectionError"); |
| HandleConnectionError(event->CHIPoBLEConnectionError.ConId, event->CHIPoBLEConnectionError.Reason); |
| } |
| break; |
| |
| // Generic CHIP events |
| case DeviceEventType::kServiceProvisioningChange: |
| // Force the advertising state to be refreshed to reflect new provisioning state. |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| break; |
| |
| case DeviceEventType::kCHIPoBLEIndicateConfirm: { |
| ChipLogDetail(DeviceLayer, "_OnPlatformEvent kCHIPoBLEIndicateConfirm"); |
| HandleIndicationConfirmation(event->CHIPoBLEIndicateConfirm.ConId, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| } |
| break; |
| |
| default: |
| ChipLogProgress(DeviceLayer, "_OnPlatformEvent default: event->Type = %d", event->Type); |
| break; |
| } |
| } |
| |
| bool BLEManagerImpl::SubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::SubscribeCharacteristic() not supported"); |
| return false; |
| } |
| |
| bool BLEManagerImpl::UnsubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::UnsubscribeCharacteristic() not supported"); |
| return false; |
| } |
| |
| bool BLEManagerImpl::CloseConnection(BLE_CONNECTION_OBJECT conId) |
| { |
| CHIP_ERROR err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| |
| ChipLogProgress(DeviceLayer, "Closing BLE GATT connection (con %u)", conId); |
| |
| err = MapBLEError(qvCHIP_BleCloseConnection(conId)); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "qvCHIP_BleCloseConnection() failed: %s", ErrorStr(err)); |
| } |
| |
| return (err == CHIP_NO_ERROR); |
| } |
| |
| uint16_t BLEManagerImpl::GetMTU(BLE_CONNECTION_OBJECT conId) const |
| { |
| uint16_t retVal = 0; |
| CHIP_ERROR err = MapBLEError(qvCHIP_BleGetMTU(conId, &retVal)); |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "qvCHIP_BleGetMTU() failed: %s", ErrorStr(err)); |
| } |
| |
| return retVal; |
| } |
| |
| bool BLEManagerImpl::SendIndication(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle data) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| bool isRxHandle; |
| uint16_t cId; |
| uint16_t dataLen = data->DataLength(); |
| |
| VerifyOrExit(IsSubscribed(conId), err = CHIP_ERROR_INVALID_ARGUMENT); |
| ChipLogDetail(DeviceLayer, "Sending indication for CHIPoBLE Client TX (con %u, len %u)", conId, dataLen); |
| |
| isRxHandle = UUIDsMatch(&chipUUID_CHIPoBLEChar_RX, charId); |
| cId = qvCHIP_BleGetHandle(isRxHandle); |
| |
| qvCHIP_BleSendIndication(conId, cId, dataLen, data->Start()); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "BLEManagerImpl::SendIndication() failed: %s", ErrorStr(err)); |
| return false; |
| } |
| return true; |
| } |
| |
| bool BLEManagerImpl::SendWriteRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendWriteRequest() not supported"); |
| return false; |
| } |
| |
| bool BLEManagerImpl::SendReadRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendReadRequest() not supported"); |
| return false; |
| } |
| |
| bool BLEManagerImpl::SendReadResponse(BLE_CONNECTION_OBJECT conId, BLE_READ_REQUEST_CONTEXT requestContext, |
| const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogProgress(DeviceLayer, "BLEManagerImpl::SendReadResponse() not supported"); |
| return false; |
| } |
| |
| void BLEManagerImpl::NotifyChipConnectionClosed(BLE_CONNECTION_OBJECT conId) |
| { |
| // Nothing to do |
| } |
| |
| CHIP_ERROR BLEManagerImpl::MapBLEError(int bleErr) const |
| { |
| CHIP_ERROR err; |
| |
| switch (bleErr) |
| { |
| case QV_STATUS_NO_ERROR: { |
| err = CHIP_NO_ERROR; |
| break; |
| } |
| case QV_STATUS_BUFFER_TOO_SMALL: { |
| err = CHIP_ERROR_BUFFER_TOO_SMALL; |
| break; |
| } |
| case QV_STATUS_INVALID_ARGUMENT: { |
| err = CHIP_ERROR_INVALID_ARGUMENT; |
| break; |
| } |
| default: { |
| err = CHIP_ERROR_INCORRECT_STATE; |
| } |
| } |
| return err; |
| } |
| |
| void BLEManagerImpl::DriveBLEState(void) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| // Perform any initialization actions that must occur after the CHIP task is running. |
| if (!mFlags.Has(Flags::kAsyncInitCompleted)) |
| { |
| mFlags.Set(Flags::kAsyncInitCompleted); |
| } |
| |
| // If the application has enabled CHIPoBLE and BLE advertising... |
| if (mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_Enabled && |
| mFlags.Has(Flags::kAdvertisingEnabled) |
| #if CHIP_DEVICE_CONFIG_CHIPOBLE_SINGLE_CONNECTION |
| // and no connections are active... |
| && (mNumGAPCons == 0) |
| #endif |
| ) |
| { |
| // Start/re-start BLE advertising if not already advertising, or if the |
| // advertising state of the underlying stack needs to be refreshed. |
| if (!mFlags.Has(Flags::kAdvertising) || mFlags.Has(Flags::kAdvertisingRefreshNeeded)) |
| { |
| mFlags.Clear(Flags::kAdvertisingRefreshNeeded); |
| err = StartAdvertising(); |
| SuccessOrExit(err); |
| } |
| } |
| |
| // Otherwise, stop advertising if currently active. |
| else if (mFlags.Has(Flags::kAdvertising)) |
| { |
| err = StopAdvertising(); |
| SuccessOrExit(err); |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %s", ErrorStr(err)); |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled; |
| } |
| } |
| |
| CHIP_ERROR BLEManagerImpl::ConfigureAdvertisingData(void) |
| { |
| ChipBLEDeviceIdentificationInfo mDeviceIdInfo; |
| CHIP_ERROR err; |
| uint8_t index = 0; |
| uint8_t deviceNameLength = 0; |
| uint8_t deviceIdInfoLength = 0; |
| |
| char deviceName[kMaxDeviceNameLength + 1]; |
| uint8_t advDataBuf[kMaxAdvertisementDataSetSize]; |
| uint8_t scanRespDataBuf[kMaxAdvertisementDataSetSize]; |
| |
| memset(advDataBuf, 0, kMaxAdvertisementDataSetSize); |
| memset(scanRespDataBuf, 0, kMaxAdvertisementDataSetSize); |
| |
| err = ConfigurationMgr().GetBLEDeviceIdentificationInfo(mDeviceIdInfo); |
| SuccessOrExit(err); |
| |
| if (!mFlags.Has(Flags::kDeviceNameSet)) |
| { |
| uint16_t discriminator; |
| SuccessOrExit(err = GetCommissionableDataProvider()->GetSetupDiscriminator(discriminator)); |
| |
| snprintf(deviceName, sizeof(deviceName), "%s%04u", CHIP_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX, discriminator); |
| |
| deviceName[kMaxDeviceNameLength] = 0; |
| err = MapBLEError(qvCHIP_BleSetDeviceName(deviceName)); |
| SuccessOrExit(err); |
| } |
| |
| deviceNameLength = static_cast<uint8_t>(strlen(deviceName)); |
| deviceIdInfoLength = sizeof(mDeviceIdInfo); |
| |
| // Check sizes |
| static_assert(sizeof(mDeviceIdInfo) + CHIP_ADV_SHORT_UUID_LEN + 1 <= UINT8_MAX, "Our length won't fit in a uint8_t"); |
| static_assert(2 + CHIP_ADV_SHORT_UUID_LEN + sizeof(mDeviceIdInfo) + 1 <= kMaxAdvertisementDataSetSize, |
| "Advertisement data buffer is not big enough"); |
| |
| // Fill in advertising data |
| index = 0; |
| advDataBuf[index++] = 0x02; // length |
| advDataBuf[index++] = CHIP_ADV_DATA_TYPE_FLAGS; // AD type : flags |
| advDataBuf[index++] = CHIP_ADV_DATA_FLAGS; // AD value |
| |
| advDataBuf[index++] = static_cast<uint8_t>(deviceIdInfoLength + CHIP_ADV_SHORT_UUID_LEN + 1); // AD length |
| advDataBuf[index++] = CHIP_ADV_DATA_TYPE_SERVICE_DATA; // AD type : Service Data |
| advDataBuf[index++] = chipUUID_CHIPoBLE_Service[1]; // AD value |
| advDataBuf[index++] = chipUUID_CHIPoBLE_Service[0]; |
| memcpy(&advDataBuf[index], (void *) &mDeviceIdInfo, deviceIdInfoLength); // AD value |
| index = static_cast<uint8_t>(index + deviceIdInfoLength); |
| |
| qvCHIP_BleSetAdvData(QV_ADV_DATA_LOC_ADV, index, advDataBuf); |
| |
| // Fill in scan response data |
| index = 0; |
| scanRespDataBuf[index++] = CHIP_ADV_SHORT_UUID_LEN + 1; // AD length |
| scanRespDataBuf[index++] = CHIP_ADV_DATA_TYPE_UUID; // AD type : uuid |
| scanRespDataBuf[index++] = chipUUID_CHIPoBLE_Service[1]; // AD value |
| scanRespDataBuf[index++] = chipUUID_CHIPoBLE_Service[0]; |
| |
| VerifyOrExit(index + (deviceNameLength + 2) <= kMaxAdvertisementDataSetSize, err = CHIP_ERROR_BUFFER_TOO_SMALL); |
| |
| scanRespDataBuf[index++] = static_cast<uint8_t>(deviceNameLength + 1); // length |
| scanRespDataBuf[index++] = CHIP_ADV_DATA_TYPE_NAME; // AD type : name |
| memcpy(&scanRespDataBuf[index], deviceName, deviceNameLength); // AD value |
| index = static_cast<uint8_t>(index + deviceNameLength); |
| |
| qvCHIP_BleSetAdvData(QV_ADV_DATA_LOC_SCAN, index, scanRespDataBuf); |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::StartAdvertising(void) |
| { |
| CHIP_ERROR err; |
| uint16_t intervalMin; |
| uint16_t intervalMax; |
| |
| // If already advertising, stop it, before changing values |
| if (mFlags.Has(Flags::kAdvertising) || mFlags.Has(Flags::kEnablingAdvertising)) |
| { |
| err = MapBLEError(qvCHIP_BleStopAdvertising()); |
| SuccessOrExit(err); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "CHIPoBLE start advertising"); |
| } |
| |
| if (!qvCHIP_IsBleTaskCreated()) |
| { |
| qvCHIP_BleTaskCreate(); |
| } |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| err = PrepareAdditionalData(); |
| SuccessOrExit(err); |
| #endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */ |
| |
| err = ConfigureAdvertisingData(); |
| SuccessOrExit(err); |
| |
| mFlags.Clear(Flags::kRestartAdvertising); |
| |
| if (mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| { |
| intervalMin = CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MIN; |
| intervalMax = CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MAX; |
| } |
| else |
| { |
| intervalMin = CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MIN; |
| intervalMax = CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MAX; |
| } |
| |
| qvCHIP_BleSetAdvInterval(intervalMin, intervalMax); |
| |
| err = MapBLEError(qvCHIP_BleStartAdvertising()); |
| SuccessOrExit(err); |
| |
| // Flag updated asynchronously by BLE host callback |
| mFlags.Set(Flags::kEnablingAdvertising); |
| |
| if (mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| { |
| StartBleAdvTimeoutTimer(CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::StopAdvertising(void) |
| { |
| CHIP_ERROR err; |
| |
| if (qvCHIP_IsBleTaskCreated() && (mNumGAPCons == 0)) |
| { |
| qvCHIP_BleTaskDelete(); |
| } |
| |
| err = MapBLEError(qvCHIP_BleStopAdvertising()); |
| SuccessOrExit(err); |
| |
| CancelBleAdvTimeoutTimer(); |
| // Transition to the not Advertising state... |
| if (mFlags.Has(Flags::kAdvertising)) |
| { |
| mFlags.Clear(Flags::kAdvertising); |
| mFlags.Set(Flags::kFastAdvertisingEnabled); |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising stopped"); |
| |
| // Post a CHIPoBLEAdvertisingChange(Stopped) event. |
| { |
| ChipDeviceEvent advChange; |
| advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange; |
| advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Stopped; |
| err = PlatformMgr().PostEvent(&advChange); |
| } |
| } |
| |
| exit: |
| return err; |
| } |
| |
| uint16_t BLEManagerImpl::_NumConnections(void) |
| { |
| uint16_t numCons = 0; |
| for (uint16_t i = 0; i < kMaxConnections; i++) |
| { |
| if (mSubscribedConIds[i] != BLE_CONNECTION_UNINITIALIZED) |
| { |
| numCons++; |
| } |
| } |
| return numCons; |
| } |
| |
| void BLEManagerImpl::DriveBLEState(intptr_t arg) |
| { |
| sInstance.DriveBLEState(); |
| } |
| |
| void BLEManagerImpl::HandleRXCharWrite(uint16_t connId, uint16_t handle, uint8_t operation, uint16_t offset, uint16_t len, |
| uint8_t * pValue, qvCHIP_Ble_Attr_t * pAttr) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| ChipLogDetail(DeviceLayer, "Write request received for CHIPoBLE Client RX characteristic (con %u, len %u)", connId, len); |
| |
| // Copy the data to a packet buffer. |
| PacketBufferHandle buf = System::PacketBufferHandle::NewWithData(pValue, len, 0, 0); |
| VerifyOrExit(!buf.IsNull(), err = CHIP_ERROR_NO_MEMORY); |
| // Post an event to the Chip queue to deliver the data into the Chip stack. |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kCHIPoBLEWriteReceived; |
| event.CHIPoBLEWriteReceived.ConId = connId; |
| event.CHIPoBLEWriteReceived.Data = std::move(buf).UnsafeRelease(); |
| err = PlatformMgr().PostEvent(&event); |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "HandleRXCharWrite() failed: %s", ErrorStr(err)); |
| // TODO: fail connection??? |
| } |
| } |
| |
| void BLEManagerImpl::HandleTXCharCCCDWrite(qvCHIP_Ble_AttsCccEvt_t * pEvt) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| bool notificationsEnabled; |
| |
| ChipLogProgress(DeviceLayer, "Write request received for CHIPoBLE TX characteristic CCCD (con %u, len %u)", pEvt->hdr.param, 0); |
| |
| // Determine if the client is enabling or disabling notifications |
| notificationsEnabled = (pEvt->value != 0); |
| |
| // If the client has requested to enable notifications |
| if (notificationsEnabled) |
| { |
| // Set subcription only the first time |
| if (!IsSubscribed(pEvt->hdr.param)) |
| { |
| // Record that notifications have been enabled for this connection. |
| err = SetSubscribed(pEvt->hdr.param); |
| VerifyOrExit(err != CHIP_ERROR_NO_MEMORY, err = CHIP_NO_ERROR); |
| SuccessOrExit(err); |
| } |
| } |
| |
| else |
| { |
| // If notifications had previously been enabled for this connection, record that they are no longer enabled |
| UnsetSubscribed(pEvt->hdr.param); |
| } |
| |
| // Post an event to the Chip queue to process either a CHIPoBLE Subscribe or Unsubscribe based on |
| // whether the client is enabling or disabling notifications |
| { |
| ChipDeviceEvent event; |
| event.Type = (notificationsEnabled) ? DeviceEventType::kCHIPoBLESubscribe : DeviceEventType::kCHIPoBLEUnsubscribe; |
| event.CHIPoBLESubscribe.ConId = pEvt->hdr.param; |
| err = PlatformMgr().PostEvent(&event); |
| } |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE %s received", notificationsEnabled ? "subscribe" : "unsubscribe"); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "HandleTXCharCCCDWrite() failed: %s", ErrorStr(err)); |
| // TODO: fail connection??? |
| } |
| } |
| |
| /* Process DM Messages */ |
| void BLEManagerImpl::HandleDmMsg(qvCHIP_Ble_DmEvt_t * pDmEvt) |
| { |
| switch (pDmEvt->hdr.event) |
| { |
| case QVCHIP_DM_RESET_CMPL_IND: { |
| break; |
| } |
| case QVCHIP_DM_SCAN_START_IND: { |
| break; |
| } |
| case QVCHIP_DM_SCAN_STOP_IND: { |
| break; |
| } |
| case QVCHIP_DM_ADV_START_IND: { |
| if (pDmEvt->hdr.status != QVCHIP_HCI_SUCCESS) |
| { |
| ChipLogError(DeviceLayer, "QVCHIP_DM_ADV_START_IND error: %d", (int) pDmEvt->advSetStart.hdr.status); |
| return; |
| } |
| |
| sInstance.mFlags.Clear(Flags::kAdvertisingRefreshNeeded); |
| sInstance.mFlags.Clear(Flags::kEnablingAdvertising); |
| |
| // Transition to the Advertising state... |
| if (!sInstance.mFlags.Has(Flags::kAdvertising)) |
| { |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising started"); |
| |
| sInstance.mFlags.Set(Flags::kAdvertising); |
| |
| // Post a CHIPoBLEAdvertisingChange(Started) event. |
| { |
| ChipDeviceEvent advChange; |
| advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange; |
| advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Started; |
| PlatformMgr().PostEventOrDie(&advChange); |
| } |
| } |
| break; |
| } |
| case QVCHIP_DM_ADV_STOP_IND: { |
| if (pDmEvt->hdr.status != QVCHIP_HCI_SUCCESS) |
| { |
| ChipLogError(DeviceLayer, "QVCHIP_DM_ADV_STOP_IND error: %d", (int) pDmEvt->advSetStop.status); |
| return; |
| } |
| break; |
| } |
| case QVCHIP_DM_CONN_OPEN_IND: { |
| ChipLogProgress(DeviceLayer, "BLE GATT connection established (con %u)", pDmEvt->connOpen.hdr.param); |
| |
| // Allocate a connection state record for the new connection. |
| mNumGAPCons++; |
| |
| // Receiving a connection stops the advertising processes. So force a refresh of the advertising |
| // state. |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| break; |
| } |
| case QVCHIP_DM_CONN_CLOSE_IND: { |
| ChipLogProgress(DeviceLayer, "BLE GATT connection closed (con %u, reason %u)", pDmEvt->connClose.hdr.param, |
| pDmEvt->connClose.reason); |
| |
| // Force a refresh of the advertising state. |
| if (mNumGAPCons > 0) |
| { |
| mNumGAPCons--; |
| } |
| |
| if (qvCHIP_IsBleTaskCreated() && (mNumGAPCons == 0)) |
| { |
| qvCHIP_BleTaskDelete(); |
| } |
| |
| // If this was a CHIPoBLE connection, release the associated connection state record |
| // and post an event to deliver a connection error to the CHIPoBLE layer. |
| if (UnsetSubscribed(pDmEvt->connClose.hdr.param)) |
| { |
| ChipDeviceEvent event; |
| event.Type = DeviceEventType::kCHIPoBLEConnectionError; |
| event.CHIPoBLEConnectionError.ConId = pDmEvt->connClose.hdr.param; |
| switch (pDmEvt->connClose.reason) |
| { |
| case QVCHIP_HCI_ERR_REMOTE_TERMINATED: |
| event.CHIPoBLEConnectionError.Reason = BLE_ERROR_REMOTE_DEVICE_DISCONNECTED; |
| break; |
| case QVCHIP_HCI_ERR_LOCAL_TERMINATED: |
| event.CHIPoBLEConnectionError.Reason = BLE_ERROR_APP_CLOSED_CONNECTION; |
| break; |
| default: |
| event.CHIPoBLEConnectionError.Reason = BLE_ERROR_CHIPOBLE_PROTOCOL_ABORT; |
| break; |
| } |
| PlatformMgr().PostEventOrDie(&event); |
| } |
| |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| break; |
| } |
| case QVCHIP_DM_CONN_UPDATE_IND: { |
| break; |
| } |
| default: { |
| break; |
| } |
| } |
| } |
| |
| /* Process ATT Messages */ |
| void BLEManagerImpl::HandleAttMsg(qvCHIP_Ble_AttEvt_t * pAttEvt) |
| { |
| switch (pAttEvt->hdr.event) |
| { |
| case QVCHIP_ATT_MTU_UPDATE_IND: { |
| break; |
| } |
| case QVCHIP_ATTS_HANDLE_VALUE_CNF: { |
| ChipDeviceEvent event; |
| |
| event.Type = DeviceEventType::kCHIPoBLEIndicateConfirm; |
| event.CHIPoBLEIndicateConfirm.ConId = pAttEvt->hdr.param; |
| PlatformMgr().PostEventOrDie(&event); |
| break; |
| } |
| case QVCHIP_ATTC_FIND_BY_TYPE_VALUE_RSP: |
| case QVCHIP_ATTC_READ_BY_GROUP_TYPE_RSP: |
| case QVCHIP_ATTC_READ_BY_TYPE_RSP: |
| case QVCHIP_ATTC_FIND_INFO_RSP: |
| break; |
| case QVCHIP_ATTC_READ_RSP: |
| break; |
| case QVCHIP_ATTC_WRITE_RSP: |
| case QVCHIP_ATTC_WRITE_CMD_RSP: |
| case QVCHIP_ATTC_PREPARE_WRITE_RSP: |
| break; |
| case QVCHIP_ATTC_EXECUTE_WRITE_RSP: |
| break; |
| case QVCHIP_ATTC_HANDLE_VALUE_NTF: |
| case QVCHIP_ATTC_HANDLE_VALUE_IND: |
| break; |
| default: { |
| break; |
| } |
| } |
| } |
| |
| void BLEManagerImpl::ExternalCbHandler(qvCHIP_Ble_MsgHdr_t * pMsg) |
| { |
| if (pMsg != nullptr) |
| { |
| PlatformMgr().LockChipStack(); |
| |
| /* Process advertising/scanning and connection-related messages */ |
| if (pMsg->event >= QVCHIP_DM_CBACK_START && pMsg->event <= QVCHIP_DM_CBACK_END) |
| { |
| ChipLogDetail(DeviceLayer, "DM event %d: status %d", pMsg->event, pMsg->status); |
| sInstance.HandleDmMsg((qvCHIP_Ble_DmEvt_t *) pMsg); |
| } |
| /* Process attribute-related messages */ |
| else if (pMsg->event >= QVCHIP_ATT_CBACK_START && pMsg->event <= QVCHIP_ATT_CBACK_END) |
| { |
| ChipLogDetail(DeviceLayer, "ATT event %d: status %d", pMsg->event, pMsg->status); |
| sInstance.HandleAttMsg((qvCHIP_Ble_AttEvt_t *) pMsg); |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "Unknown event %d", pMsg->event); |
| } |
| |
| PlatformMgr().UnlockChipStack(); |
| } |
| } |
| |
| CHIP_ERROR BLEManagerImpl::SetSubscribed(uint16_t conId) |
| { |
| uint16_t freeIndex = kMaxConnections; |
| |
| for (uint16_t i = 0; i < kMaxConnections; i++) |
| { |
| if (mSubscribedConIds[i] == conId) |
| { |
| return CHIP_NO_ERROR; |
| } |
| else if (mSubscribedConIds[i] == BLE_CONNECTION_UNINITIALIZED && i < freeIndex) |
| { |
| freeIndex = i; |
| } |
| } |
| |
| if (freeIndex < kMaxConnections) |
| { |
| mSubscribedConIds[freeIndex] = conId; |
| return CHIP_NO_ERROR; |
| } |
| else |
| { |
| return CHIP_ERROR_NO_MEMORY; |
| } |
| } |
| |
| bool BLEManagerImpl::UnsetSubscribed(uint16_t conId) |
| { |
| for (uint16_t i = 0; i < kMaxConnections; i++) |
| { |
| if (mSubscribedConIds[i] == conId) |
| { |
| mSubscribedConIds[i] = BLE_CONNECTION_UNINITIALIZED; |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| bool BLEManagerImpl::IsSubscribed(uint16_t conId) |
| { |
| if (conId != BLE_CONNECTION_UNINITIALIZED) |
| { |
| for (uint16_t i = 0; i < kMaxConnections; i++) |
| { |
| if (mSubscribedConIds[i] == conId) |
| { |
| return true; |
| } |
| } |
| } |
| return false; |
| } |
| |
| void BLEManagerImpl::_handleTXCharCCCDWrite(qvCHIP_Ble_AttsCccEvt_t * event) |
| { |
| sInstance.HandleTXCharCCCDWrite(event); |
| } |
| |
| void BLEManagerImpl::BleAdvTimeoutHandler(TimerHandle_t xTimer) |
| { |
| if (BLEMgrImpl().mFlags.Has(Flags::kFastAdvertisingEnabled)) |
| { |
| /* Stop advertising and defer restart for when stop confirmation is received from the stack */ |
| ChipLogDetail(DeviceLayer, "bleAdv Timeout : Start slow advertisement"); |
| sInstance.mFlags.Set(Flags::kRestartAdvertising); |
| sInstance.StopAdvertising(); |
| BLEMgr().SetAdvertisingMode(BLEAdvertisingMode::kSlowAdvertising); |
| } |
| } |
| |
| void BLEManagerImpl::CancelBleAdvTimeoutTimer(void) |
| { |
| if (xTimerStop(sbleAdvTimeoutTimer, 0) == pdFAIL) |
| { |
| ChipLogError(DeviceLayer, "Failed to stop BledAdv timeout timer"); |
| } |
| } |
| |
| void BLEManagerImpl::StartBleAdvTimeoutTimer(uint32_t aTimeoutInMs) |
| { |
| if (xTimerIsTimerActive(sbleAdvTimeoutTimer)) |
| { |
| CancelBleAdvTimeoutTimer(); |
| } |
| |
| // timer is not active, change its period to required value (== restart). |
| // FreeRTOS- Block for a maximum of 100 ticks if the change period command |
| // cannot immediately be sent to the timer command queue. |
| if (xTimerChangePeriod(sbleAdvTimeoutTimer, pdMS_TO_TICKS(aTimeoutInMs), 100) != pdPASS) |
| { |
| ChipLogError(DeviceLayer, "Failed to start BledAdv timeout timer"); |
| } |
| } |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| CHIP_ERROR BLEManagerImpl::PrepareAdditionalData() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| BitFlags<AdditionalDataFields> additionalDataFields; |
| AdditionalDataPayloadGeneratorParams additionalDataPayloadParams; |
| PacketBufferHandle additionalDataHandle; |
| |
| #if CHIP_ENABLE_ROTATING_DEVICE_ID |
| uint8_t rotatingDeviceIdUniqueId[ConfigurationManager::kRotatingDeviceIDUniqueIDLength] = {}; |
| MutableByteSpan rotatingDeviceIdUniqueIdSpan(rotatingDeviceIdUniqueId); |
| |
| err = GetDeviceInstanceInfoProvider()->GetRotatingDeviceIdUniqueId(rotatingDeviceIdUniqueIdSpan); |
| SuccessOrExit(err); |
| err = ConfigurationMgr().GetLifetimeCounter(additionalDataPayloadParams.rotatingDeviceIdLifetimeCounter); |
| SuccessOrExit(err); |
| additionalDataPayloadParams.rotatingDeviceIdUniqueId = rotatingDeviceIdUniqueIdSpan; |
| additionalDataFields.Set(AdditionalDataFields::RotatingDeviceId); |
| #endif /* CHIP_ENABLE_ROTATING_DEVICE_ID */ |
| |
| err = AdditionalDataPayloadGenerator().generateAdditionalDataPayload(additionalDataPayloadParams, additionalDataHandle, |
| additionalDataFields); |
| SuccessOrExit(err); |
| |
| if (!additionalDataHandle.IsNull()) |
| { |
| err = MapBLEError(qvCHIP_BleWriteC3Attr(additionalDataHandle->DataLength(), additionalDataHandle->Start())); |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Failed to prepare Additional Data"); |
| } |
| |
| return err; |
| } |
| #endif /* CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING */ |
| |
| } // namespace Internal |
| } // namespace DeviceLayer |
| } // namespace chip |
| |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
