| /* |
| * |
| * Copyright (c) 2021 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #pragma once |
| |
| /** |
| * \def MBEDTLS_AES_ALT |
| * |
| * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your |
| * alternate core implementation of a symmetric crypto, an arithmetic or hash |
| * module (e.g. platform specific assembly optimized implementations). Keep |
| * in mind that the function prototypes should remain the same. |
| * |
| * This replaces the whole module. If you only want to replace one of the |
| * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags. |
| * |
| * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer |
| * provide the "struct mbedtls_aes_context" definition and omit the base |
| * function declarations and implementations. "aes_alt.h" will be included from |
| * "aes.h" to include the new function definitions. |
| * |
| * Uncomment a macro to enable alternate implementation of the corresponding |
| * module. |
| * |
| * \warning MD2, MD4, MD5, ARC4, DES and SHA-1 are considered weak and their |
| * use constitutes a security risk. If possible, we recommend |
| * avoiding dependencies on them, and considering stronger message |
| * digests and ciphers instead. |
| * |
| */ |
| //#define MBEDTLS_AES_ALT |
| //#define MBEDTLS_ARC4_ALT |
| //#define MBEDTLS_ARIA_ALT |
| //#define MBEDTLS_BLOWFISH_ALT |
| //#define MBEDTLS_CAMELLIA_ALT |
| //#define MBEDTLS_CCM_ALT |
| //#define MBEDTLS_CHACHA20_ALT |
| //#define MBEDTLS_CHACHAPOLY_ALT |
| //#define MBEDTLS_CMAC_ALT |
| //#define MBEDTLS_DES_ALT |
| //#define MBEDTLS_DHM_ALT |
| //#define MBEDTLS_ECJPAKE_ALT |
| //#define MBEDTLS_GCM_ALT |
| //#define MBEDTLS_NIST_KW_ALT |
| //#define MBEDTLS_MD2_ALT |
| //#define MBEDTLS_MD4_ALT |
| //#define MBEDTLS_MD5_ALT |
| //#define MBEDTLS_POLY1305_ALT |
| //#define MBEDTLS_RIPEMD160_ALT |
| //#define MBEDTLS_RSA_ALT |
| //#define MBEDTLS_SHA1_ALT |
| //#define MBEDTLS_SHA256_ALT |
| //#define MBEDTLS_SHA512_ALT |
| //#define MBEDTLS_XTEA_ALT |
| |
| /** |
| * \def MBEDTLS_ERROR_STRERROR_DUMMY |
| * |
| * Enable a dummy error function to make use of mbedtls_strerror() in |
| * third party libraries easier when MBEDTLS_ERROR_C is disabled |
| * (no effect when MBEDTLS_ERROR_C is enabled). |
| * |
| * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're |
| * not using mbedtls_strerror() or error_strerror() in your application. |
| * |
| * Disable if you run into name conflicts and want to really remove the |
| * mbedtls_strerror() |
| */ |
| #define MBEDTLS_ERROR_STRERROR_DUMMY |
| |
| /** |
| * \def MBEDTLS_BASE64_C |
| * |
| * Enable the Base64 module. |
| * |
| * Module: library/base64.c |
| * Caller: library/pem.c |
| * |
| * This module is required for PEM support (required by X.509). |
| */ |
| #define MBEDTLS_BASE64_C |
| |
| /** |
| * \def MBEDTLS_HKDF_C |
| * |
| * Enable the HKDF algorithm (RFC 5869). |
| * |
| * Module: library/hkdf.c |
| * Caller: |
| * |
| * Requires: MBEDTLS_MD_C |
| * |
| * This module adds support for the Hashed Message Authentication Code |
| * (HMAC)-based key derivation function (HKDF). |
| */ |
| #define MBEDTLS_HKDF_C |
| |
| /** |
| * \def MBEDTLS_OID_C |
| * |
| * Enable the OID database. |
| * |
| * Module: library/oid.c |
| * Caller: library/asn1write.c |
| * library/pkcs5.c |
| * library/pkparse.c |
| * library/pkwrite.c |
| * library/rsa.c |
| * library/x509.c |
| * library/x509_create.c |
| * library/x509_crl.c |
| * library/x509_crt.c |
| * library/x509_csr.c |
| * library/x509write_crt.c |
| * library/x509write_csr.c |
| * |
| * This modules translates between OIDs and internal values. |
| */ |
| #define MBEDTLS_OID_C |
| |
| /** |
| * \def MBEDTLS_PEM_WRITE_C |
| * |
| * Enable PEM encoding / writing. |
| * |
| * Module: library/pem.c |
| * Caller: library/pkwrite.c |
| * library/x509write_crt.c |
| * library/x509write_csr.c |
| * |
| * Requires: MBEDTLS_BASE64_C |
| * |
| * This modules adds support for encoding / writing PEM files. |
| */ |
| #define MBEDTLS_PEM_WRITE_C |
| |
| /** |
| * \def MBEDTLS_PK_WRITE_C |
| * |
| * Enable the generic public (asymetric) key writer. |
| * |
| * Module: library/pkwrite.c |
| * Caller: library/x509write.c |
| * |
| * Requires: MBEDTLS_PK_C |
| * |
| * Uncomment to enable generic public key write functions. |
| */ |
| #define MBEDTLS_PK_WRITE_C |
| |
| /** |
| * \def MBEDTLS_PKCS5_C |
| * |
| * Enable PKCS#5 functions. |
| * |
| * Module: library/pkcs5.c |
| * |
| * Requires: MBEDTLS_MD_C |
| * |
| * This module adds support for the PKCS#5 functions. |
| */ |
| #define MBEDTLS_PKCS5_C |
| |
| /** |
| * \def MBEDTLS_X509_CREATE_C |
| * |
| * Enable X.509 core for creating certificates. |
| * |
| * Module: library/x509_create.c |
| * |
| * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C |
| * |
| * This module is the basis for creating X.509 certificates and CSRs. |
| */ |
| #define MBEDTLS_X509_CREATE_C |
| |
| /** |
| * \def MBEDTLS_X509_CSR_WRITE_C |
| * |
| * Enable creating X.509 Certificate Signing Requests (CSR). |
| * |
| * Module: library/x509_csr_write.c |
| * |
| * Requires: MBEDTLS_X509_CREATE_C |
| * |
| * This module is required for X.509 certificate request writing. |
| */ |
| #define MBEDTLS_X509_CSR_WRITE_C |